Sergiy A. Vorobyov

Xinjue Wang, Xiuheng Wang, Yejun Zhang et al.

Low-rank adapters are usually compared by sweeping a small set of ranks, but the rank also fixes the resolution of the parameter budget. For a $2048{\times}2048$ OPT attention projection, increasing LoRA by one rank stores $4096$ trainable scalars, leaving large gaps between feasible low-budget adapter sizes. This paper asks whether a tensorized adapter with finer capacity increments changes the observed accuracy--budget trade-off. We instantiate this question with fixed-component canonical polyadic (CP) tensor adapters. Under a $32{\times}64{\times}32{\times}64$ tensorization, one normalized CP component stores $193$ trainable scalars per projection, about $21$ times smaller than one LoRA rank step. We compare CP adapters and LoRA on OPT-1.3B across SST-2, RTE, and BoolQ under matched target modules, training protocol, data caps, and seed schedules. CP trains stably and fills the gaps between LoRA ranks, but the effect is task-dependent: SST-2 reaches an early low-budget plateau, BoolQ benefits from additional CP components before saturating slightly below LoRA, and RTE remains LoRA-favored. Finer parameter steps are therefore useful for diagnosing PEFT budget sensitivity, but they do not by themselves guarantee a better accuracy--budget curve.

Farshad G. Veshki, Sergiy A. Vorobyov

Simultaneous sparse approximation (SSA) seeks to represent a set of dependent signals using sparse vectors with identical supports. The SSA model has been used in various signal and image processing applications involving multiple correlated input signals. In this paper, we propose algorithms for convolutional SSA (CSSA) based on the alternating direction method of multipliers. Specifically, we address the CSSA problem with different sparsity structures and the convolutional feature learning problem in multimodal data/signals based on the SSA model. We evaluate the proposed algorithms by applying them to multimodal and multifocus image fusion problems.

Xinjue Wang, Esa Ollila, Sergiy A. Vorobyov

Graph Neural Networks (GNNs), particularly Graph Convolutional Neural Networks (GCNNs), have emerged as pivotal instruments in machine learning and signal processing for processing graph-structured data. This paper proposes an analysis framework to investigate the sensitivity of GCNNs to probabilistic graph perturbations, directly impacting the graph shift operator (GSO). Our study establishes tight expected GSO error bounds, which are explicitly linked to the error model parameters, and reveals a linear relationship between GSO perturbations and the resulting output differences at each layer of GCNNs. This linearity demonstrates that a single-layer GCNN maintains stability under graph edge perturbations, provided that the GSO errors remain bounded, regardless of the perturbation scale. For multilayer GCNNs, the dependency of system's output difference on GSO perturbations is shown to be a recursion of linearity. Finally, we exemplify the framework with the Graph Isomorphism Network (GIN) and Simple Graph Convolution Network (SGCN). Experiments validate our theoretical derivations and the effectiveness of our approach.

Farshad G. Veshki, Sergiy A. Vorobyov

Most existing convolutional dictionary learning (CDL) algorithms are based on batch learning, where the dictionary filters and the convolutional sparse representations are optimized in an alternating manner using a training dataset. When large training datasets are used, batch CDL algorithms become prohibitively memory-intensive. An online-learning technique is used to reduce the memory requirements of CDL by optimizing the dictionary incrementally after finding the sparse representations of each training sample. Nevertheless, learning large dictionaries using the existing online CDL (OCDL) algorithms remains highly computationally expensive. In this paper, we present a novel approximate OCDL method that incorporates sparse decomposition of the training samples. The resulting optimization problems are addressed using the alternating direction method of multipliers. Extensive experimental evaluations using several image datasets show that the proposed method substantially reduces computational costs while preserving the effectiveness of the state-of-the-art OCDL algorithms.

Xinjue Wang, Xiuheng Wang, Esa Ollila et al.

Hyperspectral image (HSI) deconvolution is a challenging ill-posed inverse problem, made difficult by the data's high dimensionality.We propose a parameter-parsimonious framework based on a low-rank Canonical Polyadic Decomposition (CPD) of the entire latent HSI $\mathbf{\mathcal{X}} \in \mathbb{R}^{P\times Q \times N}$.This approach recasts the problem from recovering a large-scale image with $PQN$ variables to estimating the CPD factors with $(P+Q+N)R$ variables.This model also enables a structure-aware, anisotropic Total Variation (TV) regularization applied only to the spatial factors, preserving the smooth spectral signatures.An efficient algorithm based on the Proximal Alternating Linearized Minimization (PALM) framework is developed to solve the resulting non-convex optimization problem.Experiments confirm the model's efficiency, showing a numerous parameter reduction of over two orders of magnitude and a compelling trade-off between model compactness and reconstruction accuracy.

Atchutaram K. Kocharlakota, Sergiy A. Vorobyov, Robert W. Heath

Learning-based downlink power control in cell-free massive multiple-input multiple-output (CFmMIMO) systems offers a promising alternative to conventional iterative optimization algorithms, which are computationally intensive due to online iterative steps. Existing learning-based methods, however, often fail to exploit the intrinsic structure of channel data and neglect pilot allocation information, leading to suboptimal performance, especially in large-scale networks with many users. This paper introduces the pilot contamination-aware power control (PAPC) transformer neural network, a novel approach that integrates pilot allocation data into the network, effectively handling pilot contamination scenarios. PAPC employs the attention mechanism with a custom masking technique to utilize structural information and pilot data. The architecture includes tailored preprocessing and post-processing stages for efficient feature extraction and adherence to power constraints. Trained in an unsupervised learning framework, PAPC is evaluated against the accelerated proximal gradient (APG) algorithm, showing comparable spectral efficiency fairness performance while significantly improving computational efficiency. Simulations demonstrate PAPC's superior performance over fully connected networks (FCNs) that lack pilot information, its scalability to large-scale CFmMIMO networks, and its computational efficiency improvement over APG. Additionally, by employing padding techniques, PAPC adapts to the dynamically varying number of users without retraining.

Tingting Zhang, Sergiy A. Vorobyov, David J. Love et al.

Optimization-based power control algorithms are predominantly iterative with high computational complexity, making them impractical for real-time applications in cell-free massive multiple-input multiple-output (CFmMIMO) systems. Learning-based methods have emerged as a promising alternative, and among them, graph neural networks (GNNs) have demonstrated their excellent performance in solving power control problems. However, all existing GNN-based approaches assume ideal orthogonality among pilot sequences for user equipments (UEs), which is unrealistic given that the number of UEs exceeds the available orthogonal pilot sequences in CFmMIMO schemes. Moreover, most learning-based methods assume a fixed number of UEs, whereas the number of active UEs varies over time in practice. Additionally, supervised training necessitates costly computational resources for computing the target power control solutions for a large volume of training samples. To address these issues, we propose a graph attention network for downlink power control in CFmMIMO systems that operates in a self-supervised manner while effectively handling pilot contamination and adapting to a dynamic number of UEs. Experimental results show its effectiveness, even in comparison to the optimal accelerated projected gradient method as a baseline.

Dang Qua Nguyen, Morteza Hashemi, Erik Perrins et al.

Federated learning (FL) has emerged as a promising paradigm for distributed machine learning, enabling collaborative training of a global model across multiple local devices without requiring them to share raw data. Despite its advancements, FL is limited by factors such as: (i) privacy risks arising from the unprotected transmission of local model updates to the fusion center (FC) and (ii) decreased learning utility caused by heterogeneity in model quantization resolution across participating devices. Prior work typically addresses only one of these challenges because maintaining learning utility under both privacy risks and quantization heterogeneity is a non-trivial task. In this paper, our aim is therefore to improve the learning utility of a privacy-preserving FL that allows clusters of devices with different quantization resolutions to participate in each FL round. Specifically, we introduce a novel stochastic quantizer (SQ) that is designed to simultaneously achieve differential privacy (DP) and minimum quantization error. Notably, the proposed SQ guarantees bounded distortion, unlike other DP approaches. To address quantization heterogeneity, we introduce a cluster size optimization technique combined with a linear fusion approach to enhance model aggregation accuracy. Numerical simulations validate the benefits of our approach in terms of privacy protection and learning utility compared to the conventional LaplaceSQ-FL algorithm.

Farshad G. Veshki, Sergiy A. Vorobyov

Convolutional sparse coding improves on the standard sparse approximation by incorporating a global shift-invariant model. The most efficient convolutional sparse coding methods are based on the alternating direction method of multipliers and the convolution theorem. The only major difference between these methods is how they approach a convolutional least-squares fitting subproblem. This letter presents a solution to this subproblem, which improves the efficiency of the state-of-the-art algorithms. We also use the same approach for developing an efficient convolutional dictionary learning method. Furthermore, we propose a novel algorithm for convolutional sparse coding with a constraint on the approximation error.

Farshad G. Veshki, Nora Ouzir, Sergiy A. Vorobyov et al.

Multimodal image fusion aims to combine relevant information from images acquired with different sensors. In medical imaging, fused images play an essential role in both standard and automated diagnosis. In this paper, we propose a novel multimodal image fusion method based on coupled dictionary learning. The proposed method is general and can be employed for different medical imaging modalities. Unlike many current medical fusion methods, the proposed approach does not suffer from intensity attenuation nor loss of critical information. Specifically, the images to be fused are decomposed into coupled and independent components estimated using sparse representations with identical supports and a Pearson correlation constraint, respectively. An alternating minimization algorithm is designed to solve the resulting optimization problem. The final fusion step uses the max-absolute-value rule. Experiments are conducted using various pairs of multimodal inputs, including real MR-CT and MR-PET images. The resulting performance and execution times show the competitiveness of the proposed method in comparison with state-of-the-art medical image fusion methods.

Farshad G. Veshki, Sergiy A. Vorobyov

We address the multi-focus image fusion problem, where multiple images captured with different focal settings are to be fused into an all-in-focus image of higher quality. Algorithms for this problem necessarily admit the source image characteristics along with focused and blurred features. However, most sparsity-based approaches use a single dictionary in focused feature space to describe multi-focus images, and ignore the representations in blurred feature space. We propose a multi-focus image fusion approach based on sparse representation using a coupled dictionary. It exploits the observations that the patches from a given training set can be sparsely represented by a couple of overcomplete dictionaries related to the focused and blurred categories of images and that a sparse approximation based on such coupled dictionary leads to a more flexible and therefore better fusion strategy than the one based on just selecting the sparsest representation in the original image estimate. In addition, to improve the fusion performance, we employ a coupled dictionary learning approach that enforces pairwise correlation between atoms of dictionaries learned to represent the focused and blurred feature spaces. We also discuss the advantages of the fusion approach based on coupled dictionary learning, and present efficient algorithms for fusion based on coupled dictionary learning. Extensive experimental comparisons with state-of-the-art multi-focus image fusion algorithms validate the effectiveness of the proposed approach.

Rui Gao, Sergiy A. Vorobyov, Hong Zhao

The paper addresses the image fusion problem, where multiple images captured with different focus distances are to be combined into a higher quality all-in-focus image. Most current approaches for image fusion strongly rely on the unrealistic noise-free assumption used during the image acquisition, and then yield limited robustness in fusion processing. In our approach, we formulate the multi-focus image fusion problem in terms of an analysis sparse model, and simultaneously perform the restoration and fusion of multi-focus images. Based on this model, we propose an analysis operator learning, and define a novel fusion function to generate an all-in-focus image. Experimental evaluations confirm the effectiveness of the proposed fusion approach both visually and quantitatively, and show that our approach outperforms state-of-the-art fusion methods.