Chongwen Huang

George C. Alexandropoulos, Kyriakos Stylianopoulos, Chongwen Huang et al.

The emerging technology of Reconfigurable Intelligent Surfaces (RISs) is provisioned as an enabler of smart wireless environments, offering a highly scalable, low-cost, hardware-efficient, and almost energy-neutral solution for dynamic control of the propagation of electromagnetic signals over the wireless medium, ultimately providing increased environmental intelligence for diverse operation objectives. One of the major challenges with the envisioned dense deployment of RISs in such reconfigurable radio environments is the efficient configuration of multiple metasurfaces with limited, or even the absence of, computing hardware. In this paper, we consider multi-user and multi-RIS-empowered wireless systems, and present a thorough survey of the online machine learning approaches for the orchestration of their various tunable components. Focusing on the sum-rate maximization as a representative design objective, we present a comprehensive problem formulation based on Deep Reinforcement Learning (DRL). We detail the correspondences among the parameters of the wireless system and the DRL terminology, and devise generic algorithmic steps for the artificial neural network training and deployment, while discussing their implementation details. Further practical considerations for multi-RIS-empowered wireless communications in the sixth Generation (6G) era are presented along with some key open research challenges. Differently from the DRL-based status quo, we leverage the independence between the configuration of the system design parameters and the future states of the wireless environment, and present efficient multi-armed bandits approaches, whose resulting sum-rate performances are numerically shown to outperform random configurations, while being sufficiently close to the conventional Deep Q-Network (DQN) algorithm, but with lower implementation complexity.

Wangyang Xu, Jiancheng An, Chongwen Huang et al.

Reconfigurable intelligent surface (RIS) has recently gained popularity as a promising solution for improving the signal transmission quality of wireless communications with less hardware cost and energy consumption. This letter offers a novel deep reinforcement learning (DRL) algorithm based on a location-aware imitation environment for the joint beamforming design in an RIS-aided mmWave multiple-input multiple-output system. Specifically, we design a neural network to imitate the transmission environment based on the geometric relationship between the user's location and the mmWave channel. Following this, a novel DRL-based method is developed that interacts with the imitation environment using the easily available location information. Finally, simulation results demonstrate that the proposed DRL-based algorithm provides more robust performance without excessive interaction overhead compared to the existing DRL-based approaches.

Yuzhi Yang, Zhaoyang Zhang, Yuqing Tian et al.

In split machine learning (ML), different partitions of a neural network (NN) are executed by different computing nodes, requiring a large amount of communication cost. To ease communication burden, over-the-air computation (OAC) can efficiently implement all or part of the computation at the same time of communication. Based on the proposed system, the system implementation over wireless network is introduced and we provide the problem formulation. In particular, we show that the inter-layer connection in a NN of any size can be mathematically decomposed into a set of linear precoding and combining transformations over MIMO channels. Therefore, the precoding matrix at the transmitter and the combining matrix at the receiver of each MIMO link, as well as the channel matrix itself, can jointly serve as a fully connected layer of the NN. The generalization of the proposed scheme to the conventional NNs is also introduced. Finally, we extend the proposed scheme to the widely used convolutional neural networks and demonstrate its effectiveness under both the static and quasi-static memory channel conditions with comprehensive simulations. In such a split ML system, the precoding and combining matrices are regarded as trainable parameters, while MIMO channel matrix is regarded as unknown (implicit) parameters.

Fenghao Zhu, Bohao Wang, Zhaohui Yang et al.

Beamforming with large-scale antenna arrays has been widely used in recent years, which is acknowledged as an important part in 5G and incoming 6G. Thus, various techniques are leveraged to improve its performance, e.g., deep learning, advanced optimization algorithms, etc. Although its performance in many previous research scenarios with deep learning is quite attractive, usually it drops rapidly when the environment or dataset is changed. Therefore, designing effective beamforming network with strong robustness is an open issue for the intelligent wireless communications. In this paper, we propose a robust beamforming self-supervised network, and verify it in two kinds of different datasets with various scenarios. Simulation results show that the proposed self-supervised network with hybrid learning performs well in both classic DeepMIMO and new WAIR-D dataset with the strong robustness under the various environments. Also, we present the principle to explain the rationality of this kind of hybrid learning, which is instructive to apply with more kinds of datasets.

Yourui Huangfu, Jian Wang, Shengchen Dai et al.

It is a common sense that datasets with high-quality data samples play an important role in artificial intelligence (AI), machine learning (ML) and related studies. However, although AI/ML has been introduced in wireless researches long time ago, few datasets are commonly used in the research community. Without a common dataset, AI-based methods proposed for wireless systems are hard to compare with both the traditional baselines and even each other. The existing wireless AI researches usually rely on datasets generated based on statistical models or ray-tracing simulations with limited environments. The statistical data hinder the trained AI models from further fine-tuning for a specific scenario, and ray-tracing data with limited environments lower down the generalization capability of the trained AI models. In this paper, we present the Wireless AI Research Dataset (WAIR-D)1, which consists of two scenarios. Scenario 1 contains 10,000 environments with sparsely dropped user equipments (UEs), and Scenario 2 contains 100 environments with densely dropped UEs. The environments are randomly picked up from more than 40 cities in the real world map. The large volume of the data guarantees that the trained AI models enjoy good generalization capability, while fine-tuning can be easily carried out on a specific chosen environment. Moreover, both the wireless channels and the corresponding environmental information are provided in WAIR-D, so that extra-information-aided communication mechanism can be designed and evaluated. WAIR-D provides the researchers benchmarks to compare their different designs or reproduce results of others. In this paper, we show the detailed construction of this dataset and examples of using it.

Zhaoyuan Shi, Huabing Lu, Xianzhong Xie et al.

An active reconfigurable intelligent surface (RIS)-aided multi-user downlink communication system is investigated, where non-orthogonal multiple access (NOMA) is employed to improve spectral efficiency, and the active RIS is powered by energy harvesting (EH). The problem of joint control of the RIS's amplification matrix and phase shift matrix is formulated to maximize the communication success ratio with considering the quality of service (QoS) requirements of users, dynamic communication state, and dynamic available energy of RIS. To tackle this non-convex problem, a cascaded deep learning algorithm namely long short-term memory-deep deterministic policy gradient (LSTM-DDPG) is designed. First, an advanced LSTM based algorithm is developed to predict users' dynamic communication state. Then, based on the prediction results, a DDPG based algorithm is proposed to joint control the amplification matrix and phase shift matrix of the RIS. Finally, simulation results verify the accuracy of the prediction of the proposed LSTM algorithm, and demonstrate that the LSTM-DDPG algorithm has a significant advantage over other benchmark algorithms in terms of communication success ratio performance.

Fenghao Zhu, Xinquan Wang, Siming Jiang et al.

The emergence of sixth-generation and beyond communication systems is expected to fundamentally transform digital experiences through introducing unparalleled levels of intelligence, efficiency, and connectivity. A promising technology poised to enable this revolutionary vision is a wireless large AI model (WLAM), characterized by its exceptional capabilities in data processing, inference, and decision-making. In light of these remarkable capabilities, this paper provides a comprehensive survey of WLAM, explaining its fundamental principles, diverse applications, critical challenges, and future research opportunities. We begin by introducing the background of WLAM and analyzing the key synergies with wireless networks, emphasizing the mutual benefits. Subsequently, we explore the foundational characteristics of WLAM, delving into their unique relevance in wireless environments. Then, the role of WLAM in optimizing wireless communication systems across various use cases and the reciprocal benefits are systematically investigated. Furthermore, we discuss the integration of WLAM with emerging technologies, highlighting their potential to enable transformative capabilities and breakthroughs in wireless communication. Finally, we thoroughly examine the high-level challenges and discuss pivotal future research directions.

Hang Zou, Yuzhi Yang, Lina Bariah et al.

The integration of machine learning tools into telecom networks, has led to two prevailing paradigms, namely, language-based systems, such as Large Language Models (LLMs), and physics-based systems, such as Digital Twins (DTs). While LLM-based approaches enable flexible interaction and automation, they lack explicit representations of network dynamics. DTs, in contrast, offer a high-fidelity network simulation, but remain scenario-specific and are not designed for learning or decision-making under uncertainty. This gap becomes critical for 6G systems, where decisions must take into account the evolving network states, uncertainty, and the cascading effects of control actions across multiple layers. In this article, we introduce the {Telecom World Model}~(TWM) concept, an architecture for learned, action-conditioned, uncertainty-aware modeling of telecom system dynamics. We decompose the problem into two interacting worlds, a controllable system world consisting of operator-configurable settings and an external world that captures propagation, mobility, traffic, and failures. We propose a three-layer architecture, comprising a field world model for spatial environment prediction, a control/dynamics world model for action-conditioned Key Performance Indicator (KPI) trajectory prediction, and a telecom foundation model layer for intent translation and orchestration. We showcase a comparative analysis between existing paradigms, which demonstrates that TWM jointly provides telecom state grounding, fast action-conditioned roll-outs, calibrated uncertainty, multi-timescale dynamics, model-based planning, and LLM-integrated guardrails. Furthermore, we present a proof-of-concept on network slicing to validate the proposed architecture, showing that the full three-layer pipeline outperforms single-world baselines and accurately predicts KPI trajectories.

Kai Zhao, Zhaohui Yang, Chongwen Huang et al.

Addressing the challenges of deploying large language models in wireless communication networks, this paper combines low-rank adaptation technology (LoRA) with the splitfed learning framework to propose the federated split learning for large language models (FedsLLM) framework. The method introduced in this paper utilizes LoRA technology to reduce processing loads by dividing the network into client subnetworks and server subnetworks. It leverages a federated server to aggregate and update client models. As the training data are transmitted through a wireless network between clients and both main and federated servers, the training delay is determined by the learning accuracy and the allocation of communication bandwidth. This paper models the minimization of the training delay by integrating computation and communication optimization, simplifying the optimization problem into a convex problem to find the optimal solution. Additionally, it presents a lemma that describes the precise solutions to this problem. Simulation results demonstrate that the proposed optimization algorithm reduces delays by an average of 47.63% compared to unoptimized scenarios.

Hang Zou, Yu Tian, Bohao Wang et al.

Large language models (LLMs) and multimodal models have become powerful general-purpose reasoning systems. However, radio-frequency (RF) signals, which underpin wireless systems, are still not natively supported by these models. Existing LLM-based approaches for telecom focus mainly on text and structured data, while conventional RF deep-learning models are built separately for specific signal-processing tasks, highlighting a clear gap between RF perception and high-level reasoning. To bridge this gap, we introduce RF-GPT, a radio-frequency language model (RFLM) that utilizes the visual encoders of multimodal LLMs to process and understand RF spectrograms. In this framework, complex in-phase/quadrature (IQ) waveforms are mapped to time-frequency spectrograms and then passed to pretrained visual encoders. The resulting representations are injected as RF tokens into a decoder-only LLM, which generates RF-grounded answers, explanations, and structured outputs. To train RF-GPT, we perform supervised instruction fine-tuning of a pretrained multimodal LLM using a fully synthetic RF corpus. Standards-compliant waveform generators produce wideband scenes for six wireless technologies, from which we derive time-frequency spectrograms, exact configuration metadata, and dense captions. A text-only LLM then converts these captions into RF-grounded instruction-answer pairs, yielding roughly 12,000 RF scenes and 0.625 million instruction examples without any manual labeling. Across benchmarks for wideband modulation classification, overlap analysis, wireless-technology recognition, WLAN user counting, and 5G NR information extraction, RF-GPT achieves strong multi-task performance, whereas general-purpose VLMs with no RF grounding largely fail.

Zirui Chen, Zhaoyang Zhang, Ziqing Xing et al.

Existing learning models often exhibit poor generalization when deployed across diverse scenarios. It is primarily due to that the underlying reference frame of the data varies with the deployment environment and settings. However, despite that data of each scenario has a distinct reference frame, its generation generally follows common underlying physical rules. Based on this understanding, this article proposes a deep learning framework named analogical learning (AL), which implicitly retrieves the reference frame information associated with a scenario and then to make accurate prediction by relative analogy with other scenarios. Specifically, we design a bipartite neural network called Mateformer. Its first part captures the relativity within multiple latent feature spaces between the input data and a small amount of embedded data from the studied scenario, while its second part uses this relativity to guide the nonlinear analogy. We apply AL to the typical multi-scenario learning problem of intelligent wireless localization in cellular networks. Extensive experiments validate AL's superiority across three key dimensions. First, it achieves state-of-the-art accuracy in single-scenario benchmarks. Second, it demonstrates stable transferability between different scenarios, avoiding catastrophic forgetting. Finally, and most importantly, it robustly adapts to new, unseen scenarios--including dynamic weather and traffic conditions--without any tuning. All data and code are available at https://github.com/ziruichen-research/ALLoc.

Qimei Cui, Xiaohu You, Ni Wei et al.

With the growing demand for seamless connectivity and intelligent communication, the integration of artificial intelligence (AI) and sixth-generation (6G) communication networks has emerged as a transformative paradigm. By embedding AI capabilities across various network layers, this integration enables optimized resource allocation, improved efficiency, and enhanced system robust performance, particularly in intricate and dynamic environments. This paper presents a comprehensive overview of AI and communication for 6G networks, with a focus on emphasizing their foundational principles, inherent challenges, and future research opportunities. We first review the integration of AI and communications in the context of 6G, exploring the driving factors behind incorporating AI into wireless communications, as well as the vision for the convergence of AI and 6G. The discourse then transitions to a detailed exposition of the envisioned integration of AI within 6G networks, delineated across three progressive developmental stages. The first stage, AI for Network, focuses on employing AI to augment network performance, optimize efficiency, and enhance user service experiences. The second stage, Network for AI, highlights the role of the network in facilitating and buttressing AI operations and presents key enabling technologies, such as digital twins for AI and semantic communication. In the final stage, AI as a Service, it is anticipated that future 6G networks will innately provide AI functions as services, supporting application scenarios like immersive communication and intelligent industrial robots. In addition, we conduct an in-depth analysis of the critical challenges faced by the integration of AI and communications in 6G. Finally, we outline promising future research opportunities that are expected to drive the development and refinement of AI and 6G communications.

Zehua Jiang, Fenghao Zhu, Xinquan Wang et al.

Generative models based on flow matching have emerged as a powerful paradigm for inverse problems, offering straighter trajectories and faster sampling compared to diffusion models. However, existing approaches often necessitate differentiating through unrolled paths, leading to numerical instability and prohibitive computational overhead. To address this, we propose P-Flow, a framework that stabilizes the reconstruction process by leveraging a proxy gradient to update the source point. This approach effectively circumvents the numerical instability and memory overhead of long-chain differentiation. To ensure consistency with the prior distribution, we employ a Gaussian spherical projection motivated by the concentration of measure phenomenon in high-dimensional spaces. We further provide a theoretical analysis for P-Flow based on Bayesian theory and Lipschitz continuity. Experiments across diverse restoration tasks demonstrate that P-Flow delivers competitive performance, especially under extreme degradations such as severely ill-posed conditions and high measurement noise.

Adnan Shahid, Adrian Kliks, Ahmed Al-Tahmeesschi et al.

This white paper discusses the role of large-scale AI in the telecommunications industry, with a specific focus on the potential of generative AI to revolutionize network functions and user experiences, especially in the context of 6G systems. It highlights the development and deployment of Large Telecom Models (LTMs), which are tailored AI models designed to address the complex challenges faced by modern telecom networks. The paper covers a wide range of topics, from the architecture and deployment strategies of LTMs to their applications in network management, resource allocation, and optimization. It also explores the regulatory, ethical, and standardization considerations for LTMs, offering insights into their future integration into telecom infrastructure. The goal is to provide a comprehensive roadmap for the adoption of LTMs to enhance scalability, performance, and user-centric innovation in telecom networks.

Kai Xiong, Rui Wang, Supeng Leng et al.

Urban Air Mobility (UAM) expands vehicles from the ground to the near-ground space, envisioned as a revolution for transportation systems. Comprehensive scene perception is the foundation for autonomous aerial driving. However, UAM encounters the intelligent perception challenge: high perception learning requirements conflict with the limited sensors and computing chips of flying cars. To overcome the challenge, federated learning (FL) and other collaborative learning have been proposed to enable resource-limited devices to conduct onboard deep learning (DL) collaboratively. But traditional collaborative learning like FL relies on a central integrator for DL model aggregation, which is difficult to deploy in dynamic environments. The fully decentralized learning schemes may be the intuitive solution while the convergence of distributed learning cannot be guaranteed. Accordingly, this paper explores reconfigurable intelligent surfaces (RIS) empowered distributed learning, taking account of topological attributes to facilitate the learning performance with convergence guarantee. We propose several FL topological criteria for optimizing the transmission delay and convergence rate by exploiting the Laplacian matrix eigenvalues of the communication network. Subsequently, we innovatively leverage the RIS link modification ability to remold the current network according to the proposed topological criteria. This paper rethinks the functions of RIS from the perspective of the network layer. Furthermore, a deep deterministic policy gradient-based RIS phase shift control algorithm is developed to construct or deconstruct the network links simultaneously to reshape the communication network. Simulation experiments are conducted over MobileNet-based multi-view learning to verify the efficiency of the distributed FL framework.

Xinquan Wang, Fenghao Zhu, Zhaohui Yang et al.

Large artificial intelligence (AI) models offer revolutionary potential for future wireless systems, promising unprecedented capabilities in network optimization and performance. However, current paradigms largely overlook crucial physical interactions. This oversight means they primarily rely on offline datasets, leading to difficulties in handling real-time wireless dynamics and non-stationary environments. Furthermore, these models often lack the capability for active environmental probing. This paper proposes a fundamental paradigm shift towards wireless embodied large AI (WELAI), moving from passive observation to active embodiment. We first identify key challenges faced by existing models, then we explore the design principles and system structure of WELAI. Besides, we outline prospective applications in next-generation wireless. Finally, through an illustrative case study, we demonstrate the effectiveness of WELAI and point out promising research directions for realizing adaptive, robust, and autonomous wireless systems.

Senthil Kumar Jagatheesaperumal, Zhaohui Yang, Qianqian Yang et al.

To facilitate the deployment of digital twins in Metaverse, the paradigm with semantic awareness has been proposed as a means for enabling accurate and task-oriented information extraction with inherent intelligence. However, this framework requires all devices in the Metaverse environment to be directly linked with the semantic model to enable faithful interpretation of messages. In contrast, this article introduces the digital twin framework, considering a smart industrial application, which enables semantic communication in conjugation with the Metaverse enabling technologies. The fundamentals of this framework are demonstrated on an industrial shopfloor management use case with a digital twin so as to improve its performance through semantic communication. An overview of semantic communication, Metaverse, and digital twins is presented. Integration of these technologies with the basic architecture as well as the impact on future industrial applications is presented. In a nutshell, this article showcases how semantic awareness can be an effective candidate in the implementation of digital twins for Metaverse applications.

Wangyang Xu, Lu Gan, Chongwen Huang

Reconfigurable intelligent surface (RIS) has become a promising technology to improve wireless communication in recent years. It steers the incident signals to create a favorable propagation environment by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. In this paper, we consider a RIS-aided multiuser multiple-input single-output downlink communication system. We aim to maximize the weighted sum-rate of all users by joint optimizing the active beamforming at the access point and the passive beamforming vector of the RIS elements. Unlike most existing works, we consider the more practical situation with the discrete phase shifts and imperfect channel state information (CSI). Specifically, for the situation that the discrete phase shifts and perfect CSI are considered, we first develop a deep quantization neural network (DQNN) to simultaneously design the active and passive beamforming while most reported works design them alternatively. Then, we propose an improved structure (I-DQNN) based on DQNN to simplify the parameters decision process when the control bits of each RIS element are greater than 1 bit. Finally, we extend the two proposed DQNN-based algorithms to the case that the discrete phase shifts and imperfect CSI are considered simultaneously. Our simulation results show that the two DQNN-based algorithms have better performance than traditional algorithms in the perfect CSI case, and are also more robust in the imperfect CSI case.

Wangyang Xu, Jiancheng An, Yongjun Xu et al.

To mitigate the effects of shadow fading and obstacle blocking, reconfigurable intelligent surface (RIS) has become a promising technology to improve the signal transmission quality of wireless communications by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. However, accurate, low-latency and low-pilot-overhead channel state information (CSI) acquisition remains a considerable challenge in RIS-assisted systems due to the large number of RIS passive elements. In this paper, we propose a three-stage joint channel decomposition and prediction framework to require CSI. The proposed framework exploits the two-timescale property that the base station (BS)-RIS channel is quasi-static and the RIS-user equipment (UE) channel is fast time-varying. Specifically, in the first stage, we use the full-duplex technique to estimate the channel between a BS's specific antenna and the RIS, addressing the critical scaling ambiguity problem in the channel decomposition. We then design a novel deep neural network, namely, the sparse-connected long short-term memory (SCLSTM), and propose a SCLSTM-based algorithm in the second and third stages, respectively. The algorithm can simultaneously decompose the BS-RIS channel and RIS-UE channel from the cascaded channel and capture the temporal relationship of the RIS-UE channel for prediction. Simulation results show that our proposed framework has lower pilot overhead than the traditional channel estimation algorithms, and the proposed SCLSTM-based algorithm can also achieve more accurate CSI acquisition robustly and effectively.

Chongwen Huang, Zhaohui Yang, George C. Alexandropoulos et al.

Wireless communication in the TeraHertz band (0.1--10 THz) is envisioned as one of the key enabling technologies for the future sixth generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at THz-band frequencies. Particularly, multiple passive and controllable RISs are deployed to assist the transmissions between the base station (BS) and multiple single-antenna users. We investigate the joint design of digital beamforming matrix at the BS and analog beamforming matrices at the RISs, by leveraging the recent advances in deep reinforcement learning (DRL) to combat the propagation loss. To improve the convergence of the proposed DRL-based algorithm, two algorithms are then designed to initialize the digital beamforming and the analog beamforming matrices utilizing the alternating optimization technique. Simulation results show that our proposed scheme is able to improve 50\% more coverage range of THz communications compared with the benchmarks. Furthermore, it is also shown that our proposed DRL-based method is a state-of-the-art method to solve the NP-hard beamforming problem, especially when the signals at RIS-assisted THz communication networks experience multiple hops.

Kürşat Tekbıyık, Güneş Karabulut Kurt, Chongwen Huang et al.

In this paper, graph attention network (GAT) is firstly utilized for the channel estimation. In accordance with the 6G expectations, we consider a high-altitude platform station (HAPS) mounted reconfigurable intelligent surface-assisted two-way communications and obtain a low overhead and a high normalized mean square error performance. The performance of the proposed method is investigated on the two-way backhauling link over the RIS-integrated HAPS. The simulation results denote that the GAT estimator overperforms the least square in full-duplex channel estimation. Contrary to the previously introduced methods, GAT at one of the nodes can separately estimate the cascaded channel coefficients. Thus, there is no need to use time-division duplex mode during pilot signaling in full-duplex communication. Moreover, it is shown that the GAT estimator is robust to hardware imperfections and changes in small-scale fading characteristics even if the training data do not include all these variations.

Chongwen Huang, Zhaohui Yang, George C. Alexandropoulos et al.

Wireless communication in the TeraHertz band (0.1--10 THz) is envisioned as one of the key enabling technologies for the future six generation (6G) wireless communication systems. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage range at THz-band frequencies. We investigate the joint design of digital beamforming matrix at the BS and analog beamforming matrices at the RISs, by leveraging the recent advances in deep reinforcement learning (DRL) to combat the propagation loss. Simulation results show that our proposed scheme is able to improve 50\% more coverage range of THz communications compared with the benchmarks. Furthermore, it is also shown that our proposed DRL-based method is a state-of-the-art method to solve the NP-bard beamforming problem, especially when the signals at RIS-empowered THz communication networks experience multiple hops.

Li Wei, Chongwen Huang, George C. Alexandropoulos et al.

Reconfigurable Intelligent Surfaces (RISs) have been recently considered as an energy-efficient solution for future wireless networks due to their fast and low-power configuration, which has increased potential in enabling massive connectivity and low-latency communications. Accurate and low-overhead channel estimation in RIS-based systems is one of the most critical challenges due to the usually large number of RIS unit elements and their distinctive hardware constraints. In this paper, we focus on the uplink of a RIS-empowered multi-user Multiple Input Single Output (MISO) uplink communication systems and propose a channel estimation framework based on the parallel factor decomposition to unfold the resulting cascaded channel model. We present two iterative estimation algorithms for the channels between the base station and RIS, as well as the channels between RIS and users. One is based on alternating least squares (ALS), while the other uses vector approximate message passing to iteratively reconstruct two unknown channels from the estimated vectors. To theoretically assess the performance of the ALS-based algorithm, we derived its estimation Cramér-Rao Bound (CRB). We also discuss the downlink achievable sum rate computation with estimated channels and different precoding schemes for the base station. Our extensive simulation results show that our algorithms outperform benchmark schemes and that the ALS technique achieves the CRB. It is also demonstrated that the sum rate using the estimated channels always reach that of perfect channels under various settings, thus, verifying the effectiveness and robustness of the proposed estimation algorithms.

Chongwen Huang, Ronghong Mo, Chau Yuen

Recently, the reconfigurable intelligent surface (RIS), benefited from the breakthrough on the fabrication of programmable meta-material, has been speculated as one of the key enabling technologies for the future six generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology to achieve smart radio environments. Employed as reflecting arrays, RIS is able to assist MIMO transmissions without the need of radio frequency chains resulting in considerable reduction in power consumption. In this paper, we investigate the joint design of transmit beamforming matrix at the base station and the phase shift matrix at the RIS, by leveraging recent advances in deep reinforcement learning (DRL). We first develop a DRL based algorithm, in which the joint design is obtained through trial-and-error interactions with the environment by observing predefined rewards, in the context of continuous state and action. Unlike the most reported works utilizing the alternating optimization techniques to alternatively obtain the transmit beamforming and phase shifts, the proposed DRL based algorithm obtains the joint design simultaneously as the output of the DRL neural network. Simulation results show that the proposed algorithm is not only able to learn from the environment and gradually improve its behavior, but also obtains the comparable performance compared with two state-of-the-art benchmarks. It is also observed that, appropriate neural network parameter settings will improve significantly the performance and convergence rate of the proposed algorithm.

Chongwen Huang, Sha Hu, George C. Alexandropoulos et al.

Future wireless networks are expected to evolve towards an intelligent and software reconfigurable paradigm enabling ubiquitous communications between humans and mobile devices. They will be also capable of sensing, controlling, and optimizing the wireless environment to fulfill the visions of low-power, high-throughput, massively-connected, and low-latency communications. A key conceptual enabler that is recently gaining increasing popularity is the Holographic Multiple Input Multiple Output Surface (HMIMOS) that refers to a low-cost transformative wireless planar structure comprising of sub-wavelength metallic or dielectric scattering particles, which is capable of impacting electromagnetic waves according to desired objectives. In this article, we provide an overview of HMIMOS communications by introducing the available hardware architectures for reconfigurable such metasurfaces and their main characteristics, as well as highlighting the opportunities and key challenges in designing HMIMOS-enabled communications.

Chongwen Huang, George C. Alexandropoulos, Chau Yuen et al.

Reconfigurable Intelligent Surfaces (RISs) comprised of tunable unit elements have been recently considered in indoor communication environments for focusing signal reflections to intended user locations. However, the current proofs of concept require complex operations for the RIS configuration, which are mainly realized via wired control connections. In this paper, we present a deep learning method for efficient online wireless configuration of RISs when deployed in indoor communication environments. According to the proposed method, a database of coordinate fingerprints is implemented during an offline training phase. This fingerprinting database is used to train the weights and bias of a properly designed Deep Neural Network (DNN), whose role is to unveil the mapping between the measured coordinate information at a user location and the configuration of the RIS's unit cells that maximizes this user's received signal strength. During the online phase of the presented method, the trained DNN is fed with the measured position information at the target user to output the optimal phase configurations of the RIS for signal power focusing on this intended location. Our realistic simulation results using ray tracing on a three dimensional indoor environment demonstrate that the proposed DNN-based configuration method exhibits its merits for all considered cases, and effectively increases the achievable throughput at the target user location.

Chongwen Huang, George C. Alexandropoulos, Alessio Zappone et al.

One of the fundamental challenges to realize massive Multiple-Input Multiple-Output (MIMO) communications is the accurate acquisition of channel state information for a plurality of users at the base station. This is usually accomplished in the UpLink (UL) direction profiting from the time division duplexing mode. In practical base station transceivers, there exist inevitably nonlinear hardware components, like signal amplifiers and various analog filters, which complicates the calibration task. To deal with this challenge, we design a deep neural network for channel calibration between the UL and DownLink (DL) directions. During the initial training phase, the deep neural network is trained from both UL and DL channel measurements. We then leverage the trained deep neural network with the instantaneously estimated UL channel to calibrate the DL one, which is not observable during the UL transmission phase. Our numerical results confirm the merits of the proposed approach, and show that it can achieve performance comparable to conventional approaches, like the Agros method and methods based on least squares, that however assume linear hardware behavior models. More importantly, considering generic nonlinear relationships between the UL and DL channels, it is demonstrated that our deep neural network approach exhibits robust performance, even when the number of training sequences is limited.