Xiaojun Qiu

Tong Xiao, Xiaojun Qiu, Benjamin Halkon

One enduring challenge for controlling high frequency sound in local active noise control (ANC) systems is to obtain the acoustic signal at the specific location to be controlled. In some applications such as in ANC headrest systems, it is not practical to install error microphones in a person's ears to provide the user a quiet or optimally acoustically controlled environment. Many virtual error sensing approaches have been proposed to estimate the acoustic signal remotely with the current state-of-the-art method using an array of four microphones and a head tracking system to yield sound reduction up to 1 kHz for a single sound source. In the work reported in this paper, a novel approach of incorporating remote acoustic sensing using a laser Doppler vibrometer into an ANC headrest system is investigated. In this 'virtual ANC headphone' system, a lightweight retro-reflective membrane pick-up is mounted in each synthetic ear of a head and torso simulator to determine the sound in the ear in real-time with minimal invasiveness. The membrane design and the effects of its location on the system performance are explored, the noise spectra in the ears without and with ANC for a variety of relevant primary sound fields are reported, and the performance of the system during head movements is demonstrated. The test results show that at least 10 dB sound attenuation can be realised in the ears over an extended frequency range from (500 Hz to 6 kHz) under a complex sound field and for several common types of synthesised environmental noise, even in the presence of head motion.

Linh Nguyen, Jaime Valls Miro, Xiaojun Qiu

Knowing the geometry of a space is desirable for many applications, e.g. sound source localization, sound field reproduction or auralization. In circumstances where only acoustic signals can be obtained, estimating the geometry of a room is a challenging proposition. Existing methods have been proposed to reconstruct a room from the room impulse responses (RIRs). However, the sound source and microphones must be deployed in a feasible region of the room for it to work, which is impractical when the room is unknown. This work propose to employ a robot equipped with a sound source and four acoustic sensors, to follow a proposed path planning strategy to moves around the room to collect first image sources for room geometry estimation. The strategy can effectively drives the robot from a random initial location through the room so that the room geometry is guaranteed to be revealed. Effectiveness of the proposed approach is extensively validated in a synthetic environment, where the results obtained are highly promising.