Francesco Porcini

Camilla Celli, Andrea Bini, Valerio Novelli et al.

In haptics, guaranteeing stability is essential to ensure safe interaction with remote or virtual environments. One of the most relevant methods at the state-of-the-art is the Time Domain Passivity Approach (TDPA). However, its high conservatism leads to a significant degradation of transparency. Moreover, the stabilizing action may conflict with the device's physical limitations. State-of-the-art solutions have attempted to address these actuator limits, but they still fail to account simultaneously for the power limits of each actuator while maximizing transparency. This work proposes a new damping limitation method based on prioritized dissipation actions. It prioritizes an optimal dissipation direction that minimizes actuator load, while any excess dissipation is allocated to the orthogonal hyperplane. The solution provides a closed-form formulation and is robust in multi-DoF scenarios, even in the presence of actuator and motion anisotropies. The method is experimentally validated using a parallel haptic interface interacting with a virtual environment and tested under different operating conditions.

Vittorio Lippi, Cristian Camardella, Alessandro Filippeschi et al.

Lower limbs exoskeletons provide assistance during standing, squatting, and walking. Gait dynamics, in particular, implies a change in the configuration of the device in terms of contact points, actuation, and system dynamics in general. In order to provide a comfortable experience and maximize performance, the exoskeleton should be controlled smoothly and in a transparent way, which means respectively, minimizing the interaction forces with the user and jerky behavior due to transitions between different configurations. A previous study showed that a smooth control of the exoskeleton can be achieved using a gait phase segmentation based on joint kinematics. Such a segmentation system can be implemented as linear regression and should be personalized for the user after a calibration procedure. In this work, a nonlinear segmentation function based on neural networks is implemented and compared with linear regression. An on-line implementation is then proposed and tested with a subject.

Tobias Klamt, Diego Rodriguez, Lorenzo Baccelliere et al.

Mobile manipulation robots have high potential to support rescue forces in disaster-response missions. Despite the difficulties imposed by real-world scenarios, robots are promising to perform mission tasks from a safe distance. In the CENTAURO project, we developed a disaster-response system which consists of the highly flexible Centauro robot and suitable control interfaces including an immersive tele-presence suit and support-operator controls on different levels of autonomy. In this article, we give an overview of the final CENTAURO system. In particular, we explain several high-level design decisions and how those were derived from requirements and extensive experience of Kerntechnische Hilfsdienst GmbH, Karlsruhe, Germany (KHG). We focus on components which were recently integrated and report about a systematic evaluation which demonstrated system capabilities and revealed valuable insights.