Murilo Marques Marinho

Frederico Fernandes Afonso Silva, Murilo Marques Marinho, Bruno Vilhena Adorno

This paper introduces a low-cost experimental mockup to simulate the laser cutting process of containers in nuclear decommissioning. It is composed of a three-axis table supporting a cuboid container with ultraviolet-sensitive faces, a six-degree-of-freedom serial manipulator holding an ultraviolet torch that simulates the laser, and a visual system based on cameras and fiducial markers. The system employs a constrained task-space adaptive motion controller that compensates for inaccurate parameters and eliminates the need to calibrate the system. Furthermore, as the motion controller explicitly accounts for geometric constraints, the robot reactively avoids collisions with obstacles while handling the ultraviolet torch. To enhance tracking of the laser-cutting path, we control the ultraviolet beam, which requires only four degrees of freedom, instead of the full end-effector pose. Experiments show that, despite an initially uncalibrated system, the overall system is capable of tracking different trajectories with an overall mean accuracy of 3.9 (sd 2.5) mm when the end-effector pose is controlled and 2.4 (sd 1.3) mm when the ultraviolet beam is controlled.

Murilo Marques Marinho, Bruno Vilhena Adorno

Recent advancements in constrained kinematic control make it an attractive strategy for controlling robots with arbitrary geometry in challenging tasks. Most current works assume that the robot kinematic model is precise enough for the task at hand. However, with increasing demands and safety requirements in robotic applications, there is a need for a controller that compensates online for kinematic inaccuracies. We propose an adaptive constrained kinematic control strategy based on quadratic programming, which uses partial or complete task-space measurements to compensate online for calibration errors. Our method is validated in experiments that show increased accuracy and safety compared to a state-of-the-art kinematic control strategy.

Masakazu Yoshimura, Murilo Marques Marinho, Kanako Harada et al.

Surgical robots are usually controlled using a priori models based on the robots' geometric parameters, which are calibrated before the surgical procedure. One of the challenges in using robots in real surgical settings is that those parameters can change over time, consequently deteriorating control accuracy. In this context, our group has been investigating online calibration strategies without added sensors. In one step toward that goal, we have developed an algorithm to estimate the pose of the instruments' shafts in endoscopic images. In this study, we build upon that earlier work and propose a new framework to more precisely estimate the pose of a rigid surgical instrument. Our strategy is based on a novel pose estimation model called MBAPose and the use of synthetic training data. Our experiments demonstrated an improvement of 21 % for translation error and 26 % for orientation error on synthetic test data with respect to our previous work. Results with real test data provide a baseline for further research.

Bruno Vilhena Adorno, Murilo Marques Marinho

Dual quaternion algebra and its application to robotics have gained considerable interest in the last two decades. Dual quaternions have great geometric appeal and easily capture physical phenomena inside an algebraic framework that is useful for both robot modeling and control. Mathematical objects, such as points, lines, planes, infinite cylinders, spheres, coordinate systems, twists, and wrenches are all well defined as dual quaternions. Therefore, simple operators are used to represent those objects in different frames and operations such as inner products and cross products are used to extract useful geometric relationships between them. Nonetheless, the dual quaternion algebra is not widespread as it could be, mostly because efficient and easy-to-use computational tools are not abundant and usually are restricted to the particular algebra of quaternions. To bridge this gap between theory and implementation, this paper introduces DQ Robotics, a library for robot modeling and control using dual quaternion algebra that is easy to use and intuitive enough to be used for self-study and education while being computationally efficient for deployment on real applications.

Murilo Marques Marinho, Hisashi Ishida, Kanako Harada et al.

The limited workspace in pediatric endoscopic surgery makes surgical suturing one of the most difficult tasks. During suturing, surgeons have to prevent collisions between tools and also collisions with the surrounding tissues. Surgical robots have been shown to be effective in adult laparoscopy, but assistance for suturing in constrained workspaces has not been yet fully explored. In this letter, we propose guidance virtual fixtures to enhance the performance and the safety of suturing while generating the required task constraints using constrained optimization and Cartesian force feedback. We propose two guidance methods: looping virtual fixtures and a trajectory guidance cylinder, that are based on dynamic geometric elements. In simulations and experiments with a physical robot, we show that the proposed methods achieve a more precise and safer looping in robot-assisted pediatric endoscopy.