Chen-Lung Lu

Chen-Lung Lu, John Wen

Robotics Wire Arc Additive Manufacturing (WAAM) is governed by complex and nonlinear process dynamics coupling thermal field to the build geometry. The process may be regarded as a multi-input/multi-output dynamical system with welding torch speed and wire feed rate as inputs and weld bead deposition height and width as outputs. In this paper, we use the input/output data to learn a data-driven model and use it for weld planning and control. We show that a simple recurrent neural network architecture and one-step-ahead predictive control can improve the process performance in terms of height and width consistency. To account for the changing thermal conditions during the printing process, we update the learning model using prediction error from the previous layer. This adaptation step further improves the prediction accuracy and controller performance. Experiments on a robotic WAAM testbed with integrated line-scanner feedback significant improvements in height and width consistency compared to constant input and static model baselines. The proposed learning and adaptation framework provides a practical pathway toward robust, data-driven regulation of additive manufacturing processes.

Jui-Te Huang, Chen-Lung Lu, Po-Kai Chang et al.

Deep reinforcement learning (RL), where the agent learns from mistakes, has been successfully applied to a variety of tasks. With the aim of learning collision-free policies for unmanned vehicles, deep RL has been used for training with various types of data, such as colored images, depth images, and LiDAR point clouds, without the use of classic map--localize--plan approaches. However, existing methods are limited by their reliance on cameras and LiDAR devices, which have degraded sensing under adverse environmental conditions (e.g., smoky environments). In response, we propose the use of single-chip millimeter-wave (mmWave) radar, which is lightweight and inexpensive, for learning-based autonomous navigation. However, because mmWave radar signals are often noisy and sparse, we propose a cross-modal contrastive learning for representation (CM-CLR) method that maximizes the agreement between mmWave radar data and LiDAR data in the training stage. We evaluated our method in real-world robot compared with 1) a method with two separate networks using cross-modal generative reconstruction and an RL policy and 2) a baseline RL policy without cross-modal representation. Our proposed end-to-end deep RL policy with contrastive learning successfully navigated the robot through smoke-filled maze environments and achieved better performance compared with generative reconstruction methods, in which noisy artifact walls or obstacles were produced. All pretrained models and hardware settings are open access for reproducing this study and can be obtained at https://arg-nctu.github.io/projects/deeprl-mmWave.html

Yi-Wei Huang, Chen-Lung Lu, Kuan-Lin Chen et al.

There are several challenges for search and rescue robots: mobility, perception, autonomy, and communication. Inspired by the DARPA Subterranean (SubT) Challenge, we propose an autonomous blimp robot, which has the advantages of low power consumption and collision-tolerance compared to other aerial vehicles like drones. This is important for search and rescue tasks that usually last for one or more hours. However, the underground constrained passages limit the size of blimp envelope and its payload, making the proposed system resource-constrained. Therefore, a careful design consideration is needed to build a blimp system with on-board artifact search and SLAM. In order to reach long-term operation, a failure-aware algorithm with minimal communication to human supervisor to have situational awareness and send control signals to the blimp when needed.