Tomoya Takahashi

Tomoya Takahashi, Yusaku Nakajima, Cristian Camilo Beltran-Hernandez et al.

Laboratory Automation (LA) has the potential to accelerate solid-state materials discovery by enabling continuous robotic operation without human intervention. While robotic systems have been developed for tasks such as powder grinding and X-ray diffraction (XRD) analysis, fully automating powder handling at the milligram scale remains a significant challenge due to the complex flow dynamics of powders and the diversity of laboratory tasks. To address this challenge, this study proposes the SCU-Hand-SV (Soft Conical Universal Robotic Hand with Single-sheet Valve), which preserves the softness and conical sheet designs in prior work while incorporating a controllable valve at the cone apex to enable precise, incremental dispensing of milligram-scale powder quantities. The SCU-Hand-SV is integrated with an external balance through a feedback control system based on a model of powder flow and online parameter identification. Experimental evaluations with glass beads, monosodium glutamate, and titanium dioxide demonstrated that 80% of the trials achieved an error within -2 mg to +2 mg, and the maximum error observed was approximately 20 mg across a target range of 20 mg to 3 g. In addition, by incorporating flow prediction models commonly used for hoppers and performing online parameter identification, the system is able to adapt to variations in powder dynamics. Compared to direct PID control, the proposed model-based control significantly improved both accuracy and convergence speed. These results highlight the potential of the proposed system to enable efficient and flexible powder weighing, with scalability toward larger quantities and applicability to a broad range of laboratory automation tasks.

Yongliang Wang, Cristian C. Beltran-Hernandez, Tomoya Takahashi et al.

Tool-based scooping is vital in robot-assisted tasks, enabling interaction with objects of varying sizes, shapes, and material states. Recent studies have shown that flexible, reconfigurable soft robotic end-effectors can adapt their shape to maintain consistent contact with container surfaces during scooping, improving efficiency compared to rigid tools. These soft tools can adjust to varying container sizes and materials without requiring complex sensing or control. However, the inherent compliance and complex deformation behavior of soft robotics introduce significant control complexity that limits practical applications. To address this challenge, this paper presents the development of a physics-based simulation model of a deformable soft conical robotic hand that captures its passive reconfiguration dynamics and enables systematic trajectory optimization for scooping tasks. We propose a novel physics-based simulation approach that accurately models the soft tool's morphing behavior from flat sheets to adaptive conical structures, combined with an evolutionary strategy framework that automatically optimizes scooping trajectories without manual parameter tuning. We validate the optimized trajectories through both simulation and real-robot experiments. The results demonstrate strong generalization and successfully address a range of challenging tasks previously beyond the reach of existing approaches. Videos of our experiments are available online: https://sites.google.com/view/scoopsh

Tomoya Takahashi, Masahiro Watanabe, Kenjiro Tadakuma et al.

Inflatable structures used in soft robotics applications exhibit unique characteristics. In particular, the tip-extension structure, which grows from the tip, can grow without friction against the environment. However, these inflatable structures are inferior to rigid mechanisms in terms of their load-bearing capacity. The stiffness of the tip-extension structure can be increased by pressurization, but the structure cannot maintain its curved shape and compliance. In this study, we proposed a mechanism that combines a skeleton structure consisting of multi-joint links with functions to increase rigidity while keeping low pressure and realizing the functions of bending and shape fixation. We devised a design method for rigid articulated links and combined it with a membrane structure that utilizes the advantages of the tip-extension structure. The experimental results show that the payload of the designed structure increases compared to that of the membrane-only structure. The findings of this research can be applied to long robots that can be extended in the air without drooping and to mechanisms that can wrap around the human body.

Masaki Yasuhara, Tomoya Takahashi, Hiroki Maruta et al.

INPUT is a team participating in the RoboCup Soccer Small League (SSL). It aims to show the world the technological capabilities of the Nagaoka region of Niigata Prefecture, which is where the team members are from. For this purpose, we are working on one of the projects from the Nagaoka Activation Zone of Energy (NAZE). Herein, we introduce two robots, v2019 and v2022, as well as AI systems that will be used in RoboCup 2022. In addition, we describe our efforts to develop robots in collaboration with companies in the Nagaoka area.

Tomoya Takahashi, Masahiro Watanabe, Kenjiro Tadakuma et al.

Soft robots have attracted much attention in recent years owing to their high adaptability. Long articulated soft robots enable diverse operations, and tip-extending robots that navigate their environment through growth are highly effective in robotic search applications. Because the robot membrane extends from the tip, these robots can lengthen without friction from the environment. However, the flexibility of the membrane inhibits tip retraction. Two methods have been proposed to resolve this issue; increasing the pressure of the internal fluid to reinforce rigidity, and mounting an actuator at the tip. The disadvantage of the former is that the increase is limited by the membrane pressure resistance, while the second method adds to the robot complexity. In this paper, we present a tip-retraction mechanism without bending motion that takes advantage of the friction from the external environment. Water is used as the internal fluid to increase ground pressure with the environment. We explore the failure pattern of the retraction motion and propose plausible solutions by using hydrostatic skeleton robot. Additionally, we develop a prototype robot that successfully retracts by using the proposed methodology. Our solution can contribute to the advancement of mechanical design in the soft robotics field with applications to soft snakes and manipulators.

Rio Mukaide, Kenjiro Tadakuma, Masahiro Watanabe et al.

Grippers can be attached to objects in a rigid mode, and they are therefore used in various applications, for example granular jamming gripper. This paper introduces a cutting-edge radial layer jamming mechanism with is tunable stiffness, which is critical for the development of grippers. The layer jamming mechanism generates friction between the layers of multi cylindrical walls by pulling wire. This paper describes the principles of three types of proposed tendon-driven jamming mechanism, in addition to their prototypes of string configuration and the experiments conducted on the holding torques of their joints. Due to the string configuration, the surface and three-dimensional (3D) shape. This mechanism can be implemented in various applications.