Qiangyu Chen

Zhuoheng Li, Qingquan Lin, Checheng Yu et al.

High-DOF dexterous hands require compact actuation, rich sensing, and reliable thermal behavior, but conventional designs often occupy valuable in-hand space, increase end-effector mass, and suffer from heat accumulation near the hand. Remote tendon-driven actuation offers an alternative by relocating motors to the robot base or an external motor hub, thereby freeing the fingers and palm for additional degrees of freedom, sensing modules, and maintainable mechanical structures. This paper presents MM-Hand, a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation. The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system including joint angle sensors, tactile sensors, motor-side feedback, and in-palm stereo vision. We further analyze tendon-sheath length variation and friction loss to guide the design of the routing, motor hub, and closed-loop joint control. Experiments validate the transmission, output force, sensing, and control capability of the system. The fingertip force reaches 25N under a 1m remote sheath transmission, demonstrating practical load capacity despite long-distance tendon routing. Closed-loop joint-level experiments further evaluate command tracking with a static arm and during arm motion. These results show that MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research. To support the community, all hardware designs and software frameworks are made fully open-source at https://mmlab.hk/research/MM-Hand.

Li Kang, Heng Zhou, Xiufeng Song et al.

Recent advancements in multimodal large language models and vision-languageaction models have significantly driven progress in Embodied AI. As the field transitions toward more complex task scenarios, multi-agent system frameworks are becoming essential for achieving scalable, efficient, and collaborative solutions. This shift is fueled by three primary factors: increasing agent capabilities, enhancing system efficiency through task delegation, and enabling advanced human-agent interactions. To address the challenges posed by multi-agent collaboration, we propose the Multi-Agent Robotic System (MARS) Challenge, held at the NeurIPS 2025 Workshop on SpaVLE. The competition focuses on two critical areas: planning and control, where participants explore multi-agent embodied planning using vision-language models (VLMs) to coordinate tasks and policy execution to perform robotic manipulation in dynamic environments. By evaluating solutions submitted by participants, the challenge provides valuable insights into the design and coordination of embodied multi-agent systems, contributing to the future development of advanced collaborative AI systems.

Tianxing Chen, Zanxin Chen, Baijun Chen et al.

Simulation-based data synthesis has emerged as a powerful paradigm for advancing real-world robotic manipulation. Yet existing datasets remain insufficient for robust bimanual manipulation due to (1) the lack of scalable task generation methods and (2) oversimplified simulation environments. We present RoboTwin 2.0, a scalable framework for automated, large-scale generation of diverse and realistic data, together with unified evaluation protocols for dual-arm manipulation. At its core is RoboTwin-OD, an object library of 731 instances across 147 categories with semantic and manipulation-relevant annotations. Building on this, we design an expert data synthesis pipeline that leverages multimodal language models (MLLMs) and simulation-in-the-loop refinement to automatically generate task-level execution code. To improve sim-to-real transfer, RoboTwin 2.0 applies structured domain randomization along five axes: clutter, lighting, background, tabletop height, and language, enhancing data diversity and policy robustness. The framework is instantiated across 50 dual-arm tasks and five robot embodiments. Empirically, it yields a 10.9% gain in code generation success rate. For downstream policy learning, a VLA model trained with synthetic data plus only 10 real demonstrations achieves a 367% relative improvement over the 10-demo baseline, while zero-shot models trained solely on synthetic data obtain a 228% gain. These results highlight the effectiveness of RoboTwin 2.0 in strengthening sim-to-real transfer and robustness to environmental variations. We release the data generator, benchmark, dataset, and code to support scalable research in robust bimanual manipulation. Project Page: https://robotwin-platform.github.io/, Code: https://github.com/robotwin-Platform/robotwin/.

Tianxing Chen, Yao Mu, Zhixuan Liang et al.

Recent advances in imitation learning for 3D robotic manipulation have shown promising results with diffusion-based policies. However, achieving human-level dexterity requires seamless integration of geometric precision and semantic understanding. We present G3Flow, a novel framework that constructs real-time semantic flow, a dynamic, object-centric 3D semantic representation by leveraging foundation models. Our approach uniquely combines 3D generative models for digital twin creation, vision foundation models for semantic feature extraction, and robust pose tracking for continuous semantic flow updates. This integration enables complete semantic understanding even under occlusions while eliminating manual annotation requirements. By incorporating semantic flow into diffusion policies, we demonstrate significant improvements in both terminal-constrained manipulation and cross-object generalization. Extensive experiments across five simulation tasks show that G3Flow consistently outperforms existing approaches, achieving up to 68.3% and 50.1% average success rates on terminal-constrained manipulation and cross-object generalization tasks respectively. Our results demonstrate the effectiveness of G3Flow in enhancing real-time dynamic semantic feature understanding for robotic manipulation policies.