Cristian Camilo Beltran-Hernandez

Tomoya Takahashi, Yusaku Nakajima, Cristian Camilo Beltran-Hernandez et al.

Laboratory Automation (LA) has the potential to accelerate solid-state materials discovery by enabling continuous robotic operation without human intervention. While robotic systems have been developed for tasks such as powder grinding and X-ray diffraction (XRD) analysis, fully automating powder handling at the milligram scale remains a significant challenge due to the complex flow dynamics of powders and the diversity of laboratory tasks. To address this challenge, this study proposes the SCU-Hand-SV (Soft Conical Universal Robotic Hand with Single-sheet Valve), which preserves the softness and conical sheet designs in prior work while incorporating a controllable valve at the cone apex to enable precise, incremental dispensing of milligram-scale powder quantities. The SCU-Hand-SV is integrated with an external balance through a feedback control system based on a model of powder flow and online parameter identification. Experimental evaluations with glass beads, monosodium glutamate, and titanium dioxide demonstrated that 80% of the trials achieved an error within -2 mg to +2 mg, and the maximum error observed was approximately 20 mg across a target range of 20 mg to 3 g. In addition, by incorporating flow prediction models commonly used for hoppers and performing online parameter identification, the system is able to adapt to variations in powder dynamics. Compared to direct PID control, the proposed model-based control significantly improved both accuracy and convergence speed. These results highlight the potential of the proposed system to enable efficient and flexible powder weighing, with scalability toward larger quantities and applicability to a broad range of laboratory automation tasks.

Cristian Camilo Beltran-Hernandez, Damien Petit, Ixchel G. Ramirez-Alpizar et al.

Reinforcement Learning (RL) methods have been proven successful in solving manipulation tasks autonomously. However, RL is still not widely adopted on real robotic systems because working with real hardware entails additional challenges, especially when using rigid position-controlled manipulators. These challenges include the need for a robust controller to avoid undesired behavior, that risk damaging the robot and its environment, and constant supervision from a human operator. The main contributions of this work are, first, we proposed a learning-based force control framework combining RL techniques with traditional force control. Within said control scheme, we implemented two different conventional approaches to achieve force control with position-controlled robots; one is a modified parallel position/force control, and the other is an admittance control. Secondly, we empirically study both control schemes when used as the action space of the RL agent. Thirdly, we developed a fail-safe mechanism for safely training an RL agent on manipulation tasks using a real rigid robot manipulator. The proposed methods are validated on simulation and a real robot, an UR3 e-series robotic arm.