Jeeseop Kim

Yicheng Zeng, Ruturaj S. Sambhus, Basit Muhammad Imran et al.

This paper proposes a fully decentralized model predictive control (MPC) framework with control barrier function (CBF) constraints for safety-critical trajectory planning in multi-robot legged systems. The incorporation of CBF constraints introduces explicit inter-agent coupling, which prevents direct decomposition of the resulting optimal control problems. To address this challenge, we reformulate the centralized safety-critical MPC problem using a structured distributed optimization framework based on the alternating direction method of multipliers (ADMM). By introducing a novel node-edge splitting formulation with consensus constraints, the proposed approach decomposes the global problem into independent node-local and edge-local quadratic programs that can be solved in parallel using only neighbor-to-neighbor communication. This enables fully decentralized trajectory optimization with symmetric computational load across agents while preserving safety and dynamic feasibility. The proposed framework is integrated into a hierarchical locomotion control architecture for quadrupedal robots, combining high-level distributed trajectory planning, mid-level nonlinear MPC enforcing single rigid body dynamics, and low-level whole-body control enforcing full-order robot dynamics. The effectiveness of the proposed approach is demonstrated through hardware experiments on two Unitree Go2 quadrupedal robots and numerical simulations involving up to four robots navigating uncertain environments with rough terrain and external disturbances. The results show that the proposed distributed formulation achieves performance comparable to centralized MPC while reducing the average per-cycle planning time by up to 51% in the four-agent case, enabling efficient real-time decentralized implementation.

Ruturaj S. Sambhus, Yicheng Zeng, Kapi Ketan Mehta et al.

This paper presents a safety-critical centralized nonlinear model predictive control (NMPC) framework for cooperative payload transportation by two quadrupedal robots. The interconnected robot-payload system is modeled as a discrete-time nonlinear differential-algebraic system, capturing the coupled dynamics through holonomic constraints and interaction wrenches. To ensure safety in complex environments, we develop a control barrier function (CBF)-based NMPC formulation that enforces collision avoidance constraints for both the robots and the payload. The proposed approach retains the interaction wrenches as decision variables, resulting in a structured DAE-constrained optimal control problem that enables efficient real-time implementation. The effectiveness of the algorithm is validated through extensive hardware experiments on two Unitree Go2 platforms performing cooperative payload transportation in cluttered environments under mass and inertia uncertainty and external push disturbances.

Kaveh Akbari Hamed, Jeeseop Kim, Abhishek Pandala

This paper aims to develop a hierarchical nonlinear control algorithm, based on model predictive control (MPC), quadratic programming (QP), and virtual constraints, to generate and stabilize locomotion patterns in a real-time manner for dynamical models of quadrupedal robots. The higher level of the proposed control scheme is developed based on an event-based MPC that computes the optimal center of mass (COM) trajectories for a reduced-order linear inverted pendulum (LIP) model subject to the feasibility of the net ground reaction force (GRF). The asymptotic stability of the desired target point for the reduced-order model under the event-based MPC approach is investigated. It is shown that the event-based nature of the proposed MPC approach can significantly reduce the computational burden associated with the real-time implementation of MPC techniques. To bridge the gap between reduced- and full-order models, QP-based virtual constraint controllers are developed at the lower level of the proposed control scheme to impose the full-order dynamics to track the optimal trajectories while having all individual GRFs in the friction cone. The analytical results of the paper are numerically confirmed on full-order simulation models of a 22 degree of freedom quadrupedal robot, Vision 60, that is augmented by a robotic manipulator. The paper numerically investigates the robustness of the proposed control algorithm against different contact models.