Guoqiang Hu

Maojiao Ye, Guoqiang Hu

In this paper, an aggregate game approach is proposed for the modeling and analysis of energy consumption control in smart grid. Since the electricity user's cost function depends on the aggregate load, which is unknown to the end users, an aggregate load estimator is employed to estimate it. Based on the communication among the users about their estimations on the aggregate load, Nash equilibrium seeking strategies are proposed for the electricity users. By using singular perturbation analysis and Lyapunov stability analysis, a local convergence result to the Nash equilibrium is presented for the energy consumption game that may have multiple Nash equilibria. For the energy consumption game with a unique Nash equilibrium, it is shown that the players' strategies converge to the Nash equilibrium non-locally. More specially, if the unique Nash equilibrium is an inner Nash equilibrium, then the convergence rate can be quantified. Energy consumption game with stubborn players is also investigated. Convergence to the best response strategies for the rational players is ensured. Numerical examples are provided to verify the effectiveness of the proposed methods.

Yu Yang, Guoqiang Hu, Costas J. Spanos

It has been well acknowledged that buildings account for a large proportion of the world's energy consumption. However, the energy use of buildings, especially the heating, ventilation and air-conditioning (HVAC), is far from being efficient. There still exists a dramatic potential to save energy through improving building energy efficiency. Therefore, this paper studies the control of HVAC system for multi-zone buildings with the objective to reduce energy consumption cost while satisfying thermal comfort. In particular, the thermal couplings due to the heat transfer between the adjacent zones are incorporated in the optimization. Considering that a centralized method is generally computationally prohibitive for large buildings, an efficient decentralized approach is developed, based on the Accelerated Distributed Augmented Lagrangian (ADAL) method [1]. To evaluate the performance of the proposed method, we first compare it with a centralized method, in which the optimal solution of a small-scale problem can be obtained. We find that this decentralized approach can almost approach the optimal solution of the problem. Further, this decentralized approach is compared with the Distributed Token-Based Scheduling Strategy (DTBSS) [2]. The numeric results reveal that when the number of zones is relatively small (less than 20), the two decentralized methods can achieve a comparable performance regarding the cost of the HVAC system. However, with an increase of the number of zones in the building, the proposed decentralized approach demonstrates better performance with a considerable reduction of the total cost. Moreover, the decentralized approach proposed in this paper demonstrate better scalability with less average computation required.

Jiaxiang Cheng, Yipeng Pang, Guoqiang Hu

Supervised time series prediction relies on directly measured target variables, but real-world use cases such as predicting remaining useful life (RUL) involve indirect supervision, where the target variable is labeled as a function of another dependent variable. Trending temporal regression techniques rely on sequential time series inputs to capture temporal patterns, requiring interpolation when dealing with sparsely and irregularly sampled covariates along the timeline. However, interpolation can introduce significant biases, particularly with highly scarce data. In this paper, we address the RUL prediction problem with data scarcity as time series regression under indirect supervision. We introduce a unified framework called parameterized static regression, which takes single data points as inputs for regression of target values, inherently handling data scarcity without requiring interpolation. The time dependency under indirect supervision is captured via a parametrical rectification (PR) process, approximating a parametric function during inference with historical posteriori estimates, following the same underlying distribution used for labeling during training. Additionally, we propose a novel batch training technique for tasks in indirect supervision to prevent overfitting and enhance efficiency. We evaluate our model on public benchmarks for RUL prediction with simulated data scarcity. Our method demonstrates competitive performance in prediction accuracy when dealing with highly scarce time series data.

Jiaxiang Cheng, Guoqiang Hu

The Cox proportional hazards (CPH) model has been widely applied in survival analysis to estimate relative risks across different subjects given multiple covariates. Traditional CPH models rely on a linear combination of covariates weighted with coefficients as the log-risk function, which imposes a strong and restrictive assumption, limiting generalization. Recent deep learning methods enable non-linear log-risk functions. However, they often lack interpretability due to the end-to-end training mechanisms. The implementation of Kolmogorov-Arnold Networks (KAN) offers new possibilities for extending the CPH model with fully transparent and symbolic non-linear log-risk functions. In this paper, we introduce Generalized Cox Proportional Hazards (GCPH) model, a novel method for survival analysis that leverages KAN to enable a non-linear mapping from covariates to survival outcomes in a fully symbolic manner. GCPH maintains the interpretability of traditional CPH models while allowing for the estimation of non-linear log-risk functions. Experiments conducted on both synthetic data and various public benchmarks demonstrate that GCPH achieves competitive performance in terms of prediction accuracy and exhibits superior interpretability compared to current state-of-the-art methods.

Site Qu, Guoqiang Hu

The Location-Routing Problem (LRP), which combines the challenges of facility (depot) locating and vehicle route planning, is critically constrained by the reliance on predefined depot candidates, limiting the solution space and potentially leading to suboptimal outcomes. Previous research on LRP without predefined depots is scant and predominantly relies on heuristic algorithms that iteratively attempt depot placements across a planar area. Such approaches lack the ability to proactively generate depot locations that meet specific geographic requirements, revealing a notable gap in current research landscape. To bridge this gap, we propose a data-driven generative DRL framework, designed to proactively generate depots for LRP without predefined depot candidates, solely based on customer requests data which include geographic and demand information. It can operate in two distinct modes: direct generation of exact depot locations, and the creation of a multivariate Gaussian distribution for flexible depots sampling. By extracting depots' geographic pattern from customer requests data, our approach can dynamically respond to logistical needs, identifying high-quality depot locations that further reduce total routing costs compared to traditional methods. Extensive experiments demonstrate that, for a same group of customer requests, compared with those depots identified through random attempts, our framework can proactively generate depots that lead to superior solution routes with lower routing cost. The implications of our framework potentially extend into real-world applications, particularly in emergency medical rescue and disaster relief logistics, where rapid establishment and adjustment of depot locations are paramount, showcasing its potential in addressing LRP for dynamic and unpredictable environments.

Haoyu Wang, Guoqiang Hu, Guodong Lin et al.

As a robust and large-scale multilingual speech recognition model, Whisper has demonstrated impressive results in many low-resource and out-of-distribution scenarios. However, its encoder-decoder structure hinders its application to streaming speech recognition. In this paper, we introduce Simul-Whisper, which uses the time alignment embedded in Whisper's cross-attention to guide auto-regressive decoding and achieve chunk-based streaming ASR without any fine-tuning of the pre-trained model. Furthermore, we observe the negative effect of the truncated words at the chunk boundaries on the decoding results and propose an integrate-and-fire-based truncation detection model to address this issue. Experiments on multiple languages and Whisper architectures show that Simul-Whisper achieves an average absolute word error rate degradation of only 1.46% at a chunk size of 1 second, which significantly outperforms the current state-of-the-art baseline.

Zongyuan Huang, Baohua Zhang, Guoqiang Hu et al.

Anomaly detection plays a crucial role in various real-world applications, including healthcare and finance systems. Owing to the limited number of anomaly labels in these complex systems, unsupervised anomaly detection methods have attracted great attention in recent years. Two major challenges faced by the existing unsupervised methods are: (i) distinguishing between normal and abnormal data in the transition field, where normal and abnormal data are highly mixed together; (ii) defining an effective metric to maximize the gap between normal and abnormal data in a hypothesis space, which is built by a representation learner. To that end, this work proposes a novel scoring network with a score-guided regularization to learn and enlarge the anomaly score disparities between normal and abnormal data. With such score-guided strategy, the representation learner can gradually learn more informative representation during the model training stage, especially for the samples in the transition field. We next propose a score-guided autoencoder (SG-AE), incorporating the scoring network into an autoencoder framework for anomaly detection, as well as other three state-of-the-art models, to further demonstrate the effectiveness and transferability of the design. Extensive experiments on both synthetic and real-world datasets demonstrate the state-of-the-art performance of these score-guided models (SGMs).

Yuanyuan Ding, Junchi Yan, Guoqiang Hu et al.

With the rapid growth of display devices, quality inspection via machine vision technology has become increasingly important for flat-panel displays (FPD) industry. This paper discloses a novel visual inspection system for liquid crystal display (LCD), which is currently a dominant type in the FPD industry. The system is based on two cornerstones: robust/high-performance defect recognition model and cognitive visual inspection service architecture. A hybrid application of conventional computer vision technique and the latest deep convolutional neural network (DCNN) leads to an integrated defect detection, classfication and impact evaluation model that can be economically trained with only image-level class annotations to achieve a high inspection accuracy. In addition, the properly trained model is robust to the variation of the image qulity, significantly alleviating the dependency between the model prediction performance and the image aquisition environment. This in turn justifies the decoupling of the defect recognition functions from the front-end device to the back-end serivce, motivating the design and realization of the cognitive visual inspection service architecture. Empirical case study is performed on a large-scale real-world LCD dataset from a manufacturing line with different layers and products, which shows the promising utility of our system, which has been deployed in a real-world LCD manufacturing line from a major player in the world.

Zheming Wang, Guoqiang Hu

This paper proposes a Lyapunov-based economic MPC scheme for nonlinear sytems with non-monotonic Lyapunov functions. Relaxed Lyapunov-based constraints are used in the MPC formulation to improve the economic performance. These constraints will enforce a Lyapunov decrease after every few steps. Recursive feasibility and asymptotical convergence to the steady state can be achieved using Lyapunov-like stability analysis. The proposed economic MPC can be applied to minimize energy consumption in HVAC control of commercial buildings. The Lyapunov-based constraints in the online MPC problem enable the tracking of the desired set-point temperature. The performance is demonstrated by a virtual building composed of two adjacent zones.