Luis M. de Campos

Joseanne Viana, Hamed Farkhari, Pedro Sebastiao et al.

Despite the robust security features inherent in the 5G framework, attackers will still discover ways to disrupt 5G unmanned aerial vehicle (UAV) operations and decrease UAV control communication performance in Air-to-Ground (A2G) links. Operating under the assumption that the 5G UAV communications infrastructure will never be entirely secure, we propose Deep Attention Recognition (DAtR) as a solution to identify attacks based on a small deep network embedded in authenticated UAVs. Our proposed solution uses two observable parameters: the Signal-to-Interference-plus-Noise Ratio (SINR) and the Reference Signal Received Power (RSSI) to recognize attacks under Line-of-Sight (LoS), Non-Line-of-Sight (NLoS), and a probabilistic combination of the two conditions. In the tested scenarios, a number of attackers are located in random positions, while their power is varied in each simulation. Moreover, terrestrial users are included in the network to impose additional complexity on attack detection. To improve the systems overall performance in the attack scenarios, we propose complementing the deep network decision with two mechanisms based on data manipulation and majority voting techniques. We compare several performance parameters in our proposed Deep Network. For example, the impact of Long Short-Term-Memory (LSTM) and Attention layers in terms of their overall accuracy, the window size effect, and test the accuracy when only partial data is available in the training process. Finally, we benchmark our deep network with six widely used classifiers regarding classification accuracy. Our algorithms accuracy exceeds 4% compared with the eXtreme Gradient Boosting (XGB) classifier in LoS condition and around 3% in the short distance NLoS condition. Considering the proposed deep network, all other classifiers present lower accuracy than XGB.

Joseanne Viana, Hamed Farkhari, Luis Miguel Campos et al.

Unmanned aerial vehicle (UAV) systems are vulnerable to jamming from self-interested users who utilize radio devices for their benefits during UAV transmissions. The vulnerability occurs due to the open nature of air-to-ground (A2G) wireless communication networks, which may enable network-wide attacks. This paper presents two strategies to identify Jammers in UAV networks. The first strategy is based on time series approaches for anomaly detection where the signal available in resource blocks are decomposed statistically to find trend, seasonality, and residues, while the second is based on newly designed deep networks. The joined technique is suitable for UAVs because the statistical model does not require heavy computation processing but is limited in generalizing possible attack's identification. On the other hand, the deep network can classify attacks accurately but requires more resources. The simulation considers the location and power of the jamming attacks and the UAV position related to the base station. The statistical method technique made it feasible to identify 84.38 % of attacks when the attacker was at 30 m from the UAV. Furthermore, the Deep network's accuracy was approximately 99.99 % for jamming powers greater than two and jammer distances less than 200 meters.

Hamed Farkhari, Joseanne Viana, Pedro Sebastiao et al.

Only increasing accuracy without considering uncertainty may negatively impact Deep Neural Network (DNN) decision-making and decrease its reliability. This paper proposes five combined preprocessing and post-processing methods for time-series binary classification problems that simultaneously increase the accuracy and reliability of DNN outputs applied in a 5G UAV security dataset. These techniques use DNN outputs as input parameters and process them in different ways. Two methods use a well-known Machine Learning (ML) algorithm as a complement, and the other three use only confidence values that the DNN estimates. We compare seven different metrics, such as the Expected Calibration Error (ECE), Maximum Calibration Error (MCE), Mean Confidence (MC), Mean Accuracy (MA), Normalized Negative Log Likelihood (NLL), Brier Score Loss (BSL), and Reliability Score (RS) and the tradeoffs between them to evaluate the proposed hybrid algorithms. First, we show that the eXtreme Gradient Boosting (XGB) classifier might not be reliable for binary classification under the conditions this work presents. Second, we demonstrate that at least one of the potential methods can achieve better results than the classification in the DNN softmax layer. Finally, we show that the prospective methods may improve accuracy and reliability with better uncertainty calibration based on the assumption that the RS determines the difference between MC and MA metrics, and this difference should be zero to increase reliability. For example, Method 3 presents the best RS of 0.65 even when compared to the XGB classifier, which achieves RS of 7.22.

Joseanne Viana, Hamed Farkhari, Luis Miguel Campos et al.

When users exchange data with Unmanned Aerial vehicles - (UAVs) over air-to-ground (A2G) wireless communication networks, they expose the link to attacks that could increase packet loss and might disrupt connectivity. For example, in emergency deliveries, losing control information (i.e data related to the UAV control communication) might result in accidents that cause UAV destruction and damage to buildings or other elements in a city. To prevent these problems, these issues must be addressed in 5G and 6G scenarios. This research offers a deep learning (DL) approach for detecting attacks in UAVs equipped with orthogonal frequency division multiplexing (OFDM) receivers on Clustered Delay Line (CDL) channels in highly complex scenarios involving authenticated terrestrial users, as well as attackers in unknown locations. We use the two observable parameters available in 5G UAV connections: the Received Signal Strength Indicator (RSSI) and the Signal to Interference plus Noise Ratio (SINR). The prospective algorithm is generalizable regarding attack identification, which does not occur during training. Further, it can identify all the attackers in the environment with 20 terrestrial users. A deeper investigation into the timing requirements for recognizing attacks show that after training, the minimum time necessary after the attack begins is 100 ms, and the minimum attack power is 2 dBm, which is the same power that the authenticated UAV uses. Our algorithm also detects moving attackers from a distance of 500 m.

Luís Campos, Francisco Couto

MRA (Multilingual Report Annotator) is a web application that translates Radiology text and annotates it with RadLex terms. Its goal is to explore the solution of translating non-English Radiology reports as a way to solve the problem of most of the Text Mining tools being developed for English. In this brief paper we explain the language barrier problem and shortly describe the application. MRA can be found at https://github.com/lasigeBioTM/MRA .

João Luís, Diogo Cardoso, José Marques et al.

Translation automation mechanisms and tools have been developed for several years to bring people who speak different languages together. A "new search only approach to machine translation" was adopted to tackle some of the slowness and inaccuracy of the other technologies. The idea is to develop a solution that, by indexing an incremental set of words that combine a certain semantic meaning, makes it possible to create a process of correspondence between their native language record and the language of translation. This research principle assumes that the vocabulary used in a given type of publication/document is relatively limited in terms of language style and word diversity, which enhances the greater effect of instantaneously and rigor in the translation process through the indexing process. A volume of electronic text documents where processed and loaded into a database, and analyzed and measured in order confirm the previous premise. Although the observed and projected metric values did not give encouraging results, it was possible to develop and make available a translation tool using this approach.

Hamed Farkhari, Joseanne Viana, Luis Miguel Campos et al.

Increasing the cardinality of categorical variables might decrease the overall performance of machine learning (ML) algorithms. This paper presents a novel computational preprocessing method to convert categorical to numerical variables ML algorithms. It uses a supervised binary classifier to extract additional context-related features from the categorical values. Up to two numerical variables per categorical variable are created, depending on the compression achieved by the Principal Component Analysis (PCA). The method requires two hyperparameters: a threshold related to the distribution of categories in the variables and the PCA representativeness. This paper applies the proposed approach to the well-known cybersecurity NSLKDD dataset to select and convert three categorical features to numerical features. After choosing the threshold parameter, we use conditional probabilities to convert the three categorical variables into six new numerical variables. After that, we feed these numerical variables to the PCA algorithm and select the whole or partial numbers of the Principal Components (PCs). Finally, by applying binary classification with ten different classifiers, we measure the performance of the new encoder and compare it with the other 17 well-known category encoders. The new technique achieves the highest performance related to accuracy and Area Under the Curve (AUC) on high cardinality categorical variables. Also, we define the harmonic average metrics to find the best trade-off between train and test performances and prevent underfitting and overfitting. Ultimately, the number of newly created numerical variables is minimal. This data reduction improves computational processing time in Internet of things (IoT) devices in future telecommunication networks.

Serafin Moral, Luis M. de Campos

This paper presents a procedure to determine a complete belief function from the known values of belief for some of the subsets of the frame of discerment. The method is based on the principle of minimum commitment and a new principle called the focusing principle. This additional principle is based on the idea that belief is specified for the most relevant sets: the focal elements. The resulting procedure is compared with existing methods of building complete belief functions: the minimum specificity principle and the least commitment principle.

Luis M. de Campos, Serafin Moral

In this paper we study different concepts of independence for convex sets of probabilities. There will be two basic ideas for independence. The first is irrelevance. Two variables are independent when a change on the knowledge about one variable does not affect the other. The second one is factorization. Two variables are independent when the joint convex set of probabilities can be decomposed on the product of marginal convex sets. In the case of the Theory of Probability, these two starting points give rise to the same definition. In the case of convex sets of probabilities, the resulting concepts will be strongly related, but they will not be equivalent. As application of the concept of independence, we shall consider the problem of building a global convex set from marginal convex sets of probabilities.

Silvia Acid, Luis M. de Campos

The criterion commonly used in directed acyclic graphs (dags) for testing graphical independence is the well-known d-separation criterion. It allows us to build graphical representations of dependency models (usually probabilistic dependency models) in the form of belief networks, which make easy interpretation and management of independence relationships possible, without reference to numerical parameters (conditional probabilities). In this paper, we study the following combinatorial problem: finding the minimum d-separating set for two nodes in a dag. This set would represent the minimum information (in the sense of minimum number of variables) necessary to prevent these two nodes from influencing each other. The solution to this basic problem and some of its extensions can be useful in several ways, as we shall see later. Our solution is based on a two-step process: first, we reduce the original problem to the simpler one of finding a minimum separating set in an undirected graph, and second, we develop an algorithm for solving it.

Luis M. de Campos, Juan F. Huete

Decomposable dependency models and their graphical counterparts, i.e., chordal graphs, possess a number of interesting and useful properties. On the basis of two characterizations of decomposable models in terms of independence relationships, we develop an exact algorithm for recovering the chordal graphical representation of any given decomposable model. We also propose an algorithm for learning chordal approximations of dependency models isomorphic to general undirected graphs.

Luis M. de Campos, Juan M. Fernandez-Luna, Juan F. Huete

Information Retrieval (IR) is concerned with the identification of documents in a collection that are relevant to a given information need, usually represented as a query containing terms or keywords, which are supposed to be a good description of what the user is looking for. IR systems may improve their effectiveness (i.e., increasing the number of relevant documents retrieved) by using a process of query expansion, which automatically adds new terms to the original query posed by an user. In this paper we develop a method of query expansion based on Bayesian networks. Using a learning algorithm, we construct a Bayesian network that represents some of the relationships among the terms appearing in a given document collection; this network is then used as a thesaurus (specific for that collection). We also report the results obtained by our method on three standard test collections.

Alfonso E. Romero, Luis M. de Campos

Multilabel classification is a relatively recent subfield of machine learning. Unlike to the classical approach, where instances are labeled with only one category, in multilabel classification, an arbitrary number of categories is chosen to label an instance. Due to the problem complexity (the solution is one among an exponential number of alternatives), a very common solution (the binary method) is frequently used, learning a binary classifier for every category, and combining them all afterwards. The assumption taken in this solution is not realistic, and in this work we give examples where the decisions for all the labels are not taken independently, and thus, a supervised approach should learn those existing relationships among categories to make a better classification. Therefore, we show here a generic methodology that can improve the results obtained by a set of independent probabilistic binary classifiers, by using a combination procedure with a classifier trained on the co-occurrences of the labels. We show an exhaustive experimentation in three different standard corpora of labeled documents (Reuters-21578, Ohsumed-23 and RCV1), which present noticeable improvements in all of them, when using our methodology, in three probabilistic base classifiers.