Zhiqiang Cao

Anqi Lu, Yun Cheng, Youbing Hu et al.

The demand for unmanned aerial vehicle (UAV)-based image acquisition and analysis has surged, with UAVs increasingly utilized for semantic segmentation tasks. To meet the real-time analysis requirements of UAV remote sensing missions, performing onboard computation and making decisions based on the results is a natural approach. However, deploying semantic segmentation on resource-constrained UAV platforms presents two significant challenges: 1) hardware constraints limit the ability of UAVs to perform real-time semantic segmentation, and 2) environmental variations during flight cause data distribution shifts, deviating from the original training data. To address these issues, this paper introduces SkySeg, a heterogeneous multi-UAV air-air cooperation framework that integrates computer vision and flight pattern to enable onboard semantic segmentation using low-cost sensors. SkySeg employs an efficient information fusion inference method, combining low-definition, wide-area images with high-definition, focused-area images. Additionally, it incorporates a cross-device test-time adaptation (TTA) strategy to enhance segmentation performance in dynamic environments by collaboratively addressing distribution shifts of test data streams across UAVs. Experimental results demonstrate that our SkySeg framework accelerates inference latency by approximately 3.6x, improves onboard segmentation accuracy by 5.91\%, and achieves a 10.91\% average accuracy gain in the wild.

Youbing Hu, Yun Cheng, Anqi Lu et al.

The Vision Transformer (ViT) excels in accuracy when handling high-resolution images, yet it confronts the challenge of significant spatial redundancy, leading to increased computational and memory requirements. To address this, we present the Localization and Focus Vision Transformer (LF-ViT). This model operates by strategically curtailing computational demands without impinging on performance. In the Localization phase, a reduced-resolution image is processed; if a definitive prediction remains elusive, our pioneering Neighborhood Global Class Attention (NGCA) mechanism is triggered, effectively identifying and spotlighting class-discriminative regions based on initial findings. Subsequently, in the Focus phase, this designated region is used from the original image to enhance recognition. Uniquely, LF-ViT employs consistent parameters across both phases, ensuring seamless end-to-end optimization. Our empirical tests affirm LF-ViT's prowess: it remarkably decreases Deit-S's FLOPs by 63\% and concurrently amplifies throughput twofold. Code of this project is at https://github.com/edgeai1/LF-ViT.git.

Qiuyu Ding, Zhiqiang Cao, Hailong Cao et al.

Large language models have demonstrated exceptional performance across multiple crosslingual NLP tasks, including machine translation (MT). However, persistent challenges remain in addressing context-sensitive units (CSUs), such as polysemous words. These CSUs not only affect the local translation accuracy of LLMs, but also affect LLMs' understanding capability for sentences and tasks, and even lead to translation failure. To address this problem, we propose a simple but effective method to enhance LLMs' MT capabilities by acquiring CSUs and applying semantic focus. Specifically, we dynamically analyze and identify translation challenges, then incorporate them into LLMs in a structured manner to mitigate mistranslations or misunderstandings of CSUs caused by information flattening. Efficiently activate LLMs to identify and apply relevant knowledge from its vast data pool in this way, ensuring more accurate translations for translating difficult terms. On a benchmark dataset of MT, our proposed method achieved competitive performance compared to multiple existing open-sourced MT baseline models. It demonstrates effectiveness and robustness across multiple language pairs, including both similar language pairs and distant language pairs. Notably, the proposed method requires no additional model training and enhances LLMs' performance across multiple NLP tasks with minimal resource consumption.

Shaopeng Chen, Chuyue Xie, Huimin Ren et al.

Traditional Deep Learning Recommendation Models (DLRMs) face increasing bottlenecks in performance and efficiency, often struggling with generalization and long-sequence modeling. Inspired by the scaling success of Large Language Models (LLMs), we propose Generative Ranking for Ads at Baidu (GRAB), an end-to-end generative framework for Click-Through Rate (CTR) prediction. GRAB integrates a novel Causal Action-aware Multi-channel Attention (CamA) mechanism to effectively capture temporal dynamics and specific action signals within user behavior sequences. Full-scale online deployment demonstrates that GRAB significantly outperforms established DLRMs, delivering a 3.05% increase in revenue and a 3.49% rise in CTR. Furthermore, the model demonstrates desirable scaling behavior: its expressive power shows a monotonic and approximately linear improvement as longer interaction sequences are utilized.

Youbing Hu, Yun Cheng, Zimu Zhou et al.

Continual adaptation to domain shifts at test time (CTTA) is crucial for enhancing the intelligence of deep learning enabled IoT applications. However, prevailing TTA methods, which typically update all batch normalization (BN) layers, exhibit two memory inefficiencies. First, the reliance on BN layers for adaptation necessitates large batch sizes, leading to high memory usage. Second, updating all BN layers requires storing the activations of all BN layers for backpropagation, exacerbating the memory demand. Both factors lead to substantial memory costs, making existing solutions impractical for IoT devices. In this paper, we present FoCTTA, a low-memory CTTA strategy. The key is to automatically identify and adapt a few drift-sensitive representation layers, rather than blindly update all BN layers. The shift from BN to representation layers eliminates the need for large batch sizes. Also, by updating adaptation-critical layers only, FoCTTA avoids storing excessive activations. This focused adaptation approach ensures that FoCTTA is not only memory-efficient but also maintains effective adaptation. Evaluations show that FoCTTA improves the adaptation accuracy over the state-of-the-arts by 4.5%, 4.9%, and 14.8% on CIFAR10-C, CIFAR100-C, and ImageNet-C under the same memory constraints. Across various batch sizes, FoCTTA reduces the memory usage by 3-fold on average, while improving the accuracy by 8.1%, 3.6%, and 0.2%, respectively, on the three datasets.

Youbing Hu, Yun Cheng, Olga Saukh et al.

Dataset distillation has emerged as a strategy to compress real-world datasets for efficient training. However, it struggles with large-scale and high-resolution datasets, limiting its practicality. This paper introduces a novel resolution-independent dataset distillation method Focus ed Dataset Distillation (FocusDD), which achieves diversity and realism in distilled data by identifying key information patches, thereby ensuring the generalization capability of the distilled dataset across different network architectures. Specifically, FocusDD leverages a pre-trained Vision Transformer (ViT) to extract key image patches, which are then synthesized into a single distilled image. These distilled images, which capture multiple targets, are suitable not only for classification tasks but also for dense tasks such as object detection. To further improve the generalization of the distilled dataset, each synthesized image is augmented with a downsampled view of the original image. Experimental results on the ImageNet-1K dataset demonstrate that, with 100 images per class (IPC), ResNet50 and MobileNet-v2 achieve validation accuracies of 71.0% and 62.6%, respectively, outperforming state-of-the-art methods by 2.8% and 4.7%. Notably, FocusDD is the first method to use distilled datasets for object detection tasks. On the COCO2017 dataset, with an IPC of 50, YOLOv11n and YOLOv11s achieve 24.4% and 32.1% mAP, respectively, further validating the effectiveness of our approach.

Qiuyu Ding, Zhiqiang Cao, Hailong Cao et al.

Bilingual Lexicon Induction (BLI) is generally based on common domain data to obtain monolingual word embedding, and by aligning the monolingual word embeddings to obtain the cross-lingual embeddings which are used to get the word translation pairs. In this paper, we propose a new task of BLI, which is to use the monolingual corpus of the general domain and target domain to extract domain-specific bilingual dictionaries. Motivated by the ability of Pre-trained models, we propose a method to get better word embeddings that build on the recent work on BLI. This way, we introduce the Code Switch(Qin et al., 2020) firstly in the cross-domain BLI task, which can match differit is yet to be seen whether these methods are suitable for bilingual lexicon extraction in professional fields. As we can see in table 1, the classic and efficient BLI approach, Muse and Vecmap, perform much worse on the Medical dataset than on the Wiki dataset. On one hand, the specialized domain data set is relatively smaller compared to the generic domain data set generally, and specialized words have a lower frequency, which will directly affect the translation quality of bilingual dictionaries. On the other hand, static word embeddings are widely used for BLI, however, in some specific fields, the meaning of words is greatly influenced by context, in this case, using only static word embeddings may lead to greater bias. ent strategies in different contexts, making the model more suitable for this task. Experimental results show that our method can improve performances over robust BLI baselines on three specific domains by averagely improving 0.78 points.

Yahao Dai, Henry Chan, Aikaterini Vriza et al.

AI-powered autonomous experimentation (AI/AE) can accelerate materials discovery but its effectiveness for electronic materials is hindered by data scarcity from lengthy and complex design-fabricate-test-analyze cycles. Unlike experienced human scientists, even advanced AI algorithms in AI/AE lack the adaptability to make informative real-time decisions with limited datasets. Here, we address this challenge by developing and implementing an AI decision interface on our AI/AE system. The central element of the interface is an AI advisor that performs real-time progress monitoring, data analysis, and interactive human-AI collaboration for actively adapting to experiments in different stages and types. We applied this platform to an emerging type of electronic materials-mixed ion-electron conducting polymers (MIECPs) -- to engineer and study the relationships between multiscale morphology and properties. Using organic electrochemical transistors (OECT) as the testing-bed device for evaluating the mixed-conducting figure-of-merit -- the product of charge-carrier mobility and the volumetric capacitance (μC*), our adaptive AI/AE platform achieved a 150% increase in μC* compared to the commonly used spin-coating method, reaching 1,275 F cm-1 V-1 s-1 in just 64 autonomous experimental trials. A study of 10 statistically selected samples identifies two key structural factors for achieving higher volumetric capacitance: larger crystalline lamellar spacing and higher specific surface area, while also uncovering a new polymer polymorph in this material.

Rashid Ali, Dil Nawaz Hakro, Yongping He et al.

This paper aims to improve the performance and positioning accuracy of a robot by using the particle filter method. The laser range information is a wireless navigation system mainly used to measure, position, and control autonomous robots. Its localization is more flexible to control than wired guidance systems. However, the navigation through the laser range finder occurs with a large positioning error while it moves or turns fast. For solving this problem, the paper proposes a method to improve the positioning accuracy of a robot in an indoor environment by using a particle filter with robust characteristics in a nonlinear or non-Gaussian system. In this experiment, a robot is equipped with a laser range finder, two encoders, and a gyro for navigation to verify the positioning accuracy and performance. The positioning accuracy and performance could improve by approximately 85.5% in this proposed method.

Zhiqiang Cao, Zhijun Li, Pan Heng et al.

As one of the basic tasks of computer vision, object detection has been widely used in many intelligent applications. However, object detection algorithms are usually heavyweight in computation, hindering their implementations on resource-constrained edge devices. Current edge-cloud collaboration methods, such as CNN partition over Edge-cloud devices, are not suitable for object detection since the huge data size of the intermediate results will introduce extravagant communication costs. To address this challenge, we propose a small-big model framework that deploys a big model in the cloud and a small model on the edge devices. Upon receiving data, the edge device operates a difficult-case discriminator to classify the images into easy cases and difficult cases according to the specific semantics of the images. The easy cases will be processed locally at the edge, and the difficult cases will be uploaded to the cloud. Experimental results on the VOC, COCO, HELMET datasets using two different object detection algorithms demonstrate that the small-big model system can detect 94.01%-97.84% of objects with only about 50% images uploaded to the cloud when using SSD. In addition, the small-big model averagely reaches 91.22%- 92.52% end-to-end mAP of the scheme that uploading all images to the cloud.

Zhiqiang Cao, Ran Liu, Chau Yuen et al.

Relative localization between autonomous robots without infrastructure is crucial to achieve their navigation, path planning, and formation in many applications, such as emergency response, where acquiring a prior knowledge of the environment is not possible. The traditional Ultra-WideBand (UWB)-based approach provides a good estimation of the distance between the robots, but obtaining the relative pose (including the displacement and orientation) remains challenging. We propose an approach to estimate the relative pose between a group of robots by equipping each robot with multiple UWB ranging nodes. We determine the pose between two robots by minimizing the residual error of the ranging measurements from all UWB nodes. To improve the localization accuracy, we propose to utilize the odometry constraints through a sliding window-based optimization. The optimized pose is then fused with the odometry in a particle filtering for pose tracking among a group of mobile robots. We have conducted extensive experiments to validate the effectiveness of the proposed approach.

Ran Liu, Yongping He, Chau Yuen et al.

Environment mapping is an essential prerequisite for mobile robots to perform different tasks such as navigation and mission planning. With the availability of low-cost 2D LiDARs, there are increasing applications of such 2D LiDARs in industrial environments. However, environment mapping in an unknown and feature-less environment with such low-cost 2D LiDARs remains a challenge. The challenge mainly originates from the short-range of LiDARs and complexities in performing scan matching in these environments. In order to resolve these shortcomings, we propose to fuse the ultra-wideband (UWB) with 2D LiDARs to improve the mapping quality of a mobile robot. The optimization-based approach is utilized for the fusion of UWB ranging information and odometry to first optimize the trajectory. Then the LiDAR-based loop closures are incorporated to improve the accuracy of the trajectory estimation. Finally, the optimized trajectory is combined with the LiDAR scans to produce the occupancy map of the environment. The performance of the proposed approach is evaluated in an indoor feature-less environment with a size of 20m*20m. Obtained results show that the mapping error of the proposed scheme is 85.5% less than that of the conventional GMapping algorithm with short-range LiDAR (for example Hokuyo URG-04LX in our experiment with a maximum range of 5.6m).

Ming Ouyang, Xuesong Shi, Yujie Wang et al.

We present a collaborative visual simultaneous localization and mapping (SLAM) framework for service robots. With an edge server maintaining a map database and performing global optimization, each robot can register to an existing map, update the map, or build new maps, all with a unified interface and low computation and memory cost. We design an elegant communication pipeline to enable real-time information sharing between robots. With a novel landmark organization and retrieval method on the server, each robot can acquire landmarks predicted to be in its view, to augment its local map. The framework is general enough to support both RGB-D and monocular cameras, as well as robots with multiple cameras, taking the rigid constraints between cameras into consideration. The proposed framework has been fully implemented and verified with public datasets and live experiments.