Čedomir Stefanović

Pietro Danzi, Marko Angjelichinoski, Čedomir Stefanović et al.

In standard implementations of distributed secondary control for DC MicroGrids (MGs), the exchange of local measurements among neighboring control agents is enabled via off-the-shelf wireless solutions, such as IEEE 802.11. However, Denial of Service (DoS) attacks on the wireless interface through jamming prevents the secondary control system from performing its main tasks, which might compromise the stability of the MG. In this paper, we propose novel, robust and secure secondary control reconfiguration strategy, tailored to counteract DoS attacks. Specifically, upon detecting the impairment of the wireless interface, the jammed secondary control agent notifies its peers via a secure, low-rate powerline channel based on Power Talk communication. This triggers reconfiguration of the wireless communication graph through primary control mode switching, where the jammed agents leave the secondary control by switching to current source mode, and are replaced by nonjammed current sources that switch to voltage source mode and join the secondary control. The strategy fits within the software-defined networking framework, where the network control is split from the data plane using reliable and secure side power talk communication channel, created via software modification of the MG primary control loops. The simulation results illustrate the feasibility of the solution and prove that the MG resilience and performance can be indeed improved via software-defined networking approaches.

Marko Angjelichinoski, Pietro Danzi, Čedomir Stefanović et al.

We propose a novel framework for secure and reliable authentication of Distributed Energy Resources to the centralized secondary/tertiary control system of a DC MicroGrid (MG), networked using the IEEE 802.11 wireless interface. The key idea is to perform the authentication using power talk, which is a powerline communication technique executed by the primary control loops of the power electronic converters, without the use of a dedicated hardware for its modem. In addition, the scheme also promotes direct and active participation of the control system in the authentication process, a feature not commonly encountered in current networked control systems for MicroGrids. The PLECS-based simulations verifies the viability of our scheme.

Pietro Danzi, Marko Angjelichinoski, Čedomir Stefanović et al.

Microgrids (MGs) rely on networked control supported by off-the-shelf wireless communications. This makes them vulnerable to cyber-attacks, such as denial-of-service (DoS). In this paper, we mitigate those attacks by applying the concepts of (i) separation of data plane from network control plane, inspired by the software defined networking (SDN) paradigm, and (ii) agile reconfiguration of the data plane connections. In our architecture, all generators operate as either voltage regulators (active agents), or current sources (passive agents), with their operating mode being locally determined, according the global information on the MG state. The software-defined MG control utilizes the fact that, besides the data exchange on the wireless channel, the power-grid bus can be used to create side communication channels that carry control plane information about the state of the MG. For this purpose, we adopt power talk, a modem-less, low-rate, power-line communication designed for direct current (DC) MGs. The results show that the proposed software-defined MG offers superior performance compared to the static MG, as well as resilience against cyber attacks.

Cedomir Stefanovic, Marko Angjelichinoski, Pietro Danzi et al.

The future smart grid is envisioned as a network of interconnected microgrids (MGs) - small-scale local power networks comprising generators, storage capacities and loads. MGs bring unprecedented modularity, efficiency, sustainability, and resilience to the power grid as a whole. Due to the high share of renewable generation, MGs require innovative concepts for control and optimization, giving rise to a novel class of smart energy applications, in which communications represent an integral part. In this paper, we review power talk, a communication technique specifically developed for direct current MGs, which exploits the communication potential residing within the MG power equipment. Depending on the smart energy application, power talk can be used either as a primary communication enabler, or an auxiliary communication system that provides resilient and secure operation. The key advantage of power talk is that it derives its availability, reliability, and security from the very MG elements, outmatching standard, off-the shelf communication solutions.

Milica Petkovic, Tijana Devaja, Dejan Vukobratovic et al.

In this article, we consider a random access scheme for an indoor Internet of Things (IoT) framework that uses optical wireless communication (OWC). We focus on a Slotted ALOHA (SA)-based solution where a number of OWC IoT users contend to send data to a central OWC receiver. In any given slot, and for a randomly selected active user, we consider the reliability of decoding the user's data packet at the receiver. This is done by deriving the signal-to-noise-and-interference-ratio (SINR) statistics from a randomly chosen user and evaluating the probability that the user's SINR is below a given threshold. By placing our analysis in the context of an indoor OWC IoT uplink setup, and employing the standard OWC channel model, we investigate the trade-offs between the reliability and the OWC system parameters such as the cell area or the transmitter's semi-angle. We obtain valuable insights into the design of an SA-based random access solution for a typical indoor OWC cell.

Chien-Cheng Wu, Vasilis Friderikos, Cedomir Stefanovic

Network Slicing (NS) is crucial for efficiently enabling divergent network applications in next generation networks. Nonetheless, the complex Quality of Service (QoS) requirements and diverse heterogeneity in network services entails high computational time for Network Slice Provisioning (NSP) optimization. The legacy optimization methods are challenging to meet the low latency and high reliability of network applications. To this end, we model the real-time NSP as an Online Network Slice Provisioning (ONSP) problem. Specifically, we formulate the ONSP problem as an online Multi-Objective Integer Programming Optimization (MOIPO) problem. Then, we approximate the solution of the MOIPO problem by applying the Proximal Policy Optimization (PPO) method to the traffic demand prediction. Our simulation results show the effectiveness of the proposed method compared to the state-of-the-art MOIPO solvers with a lower SLA violation rate and network operation cost.

Henrik C. M. Frederiksen, Junya Shiraishi, Cedomir Stefanovic et al.

The use of lightweight machine learning (ML) models in internet of things (IoT) networks enables resource constrained IoT devices to perform on-device inference for several critical applications. However, the inference accuracy deteriorates due to the non-stationarity in the IoT environment and limited initial training data. To counteract this, the deployed models can be updated occasionally with new observed data samples. However, this approach consumes additional energy, which is undesirable for energy constrained IoT devices. This letter introduces an event-driven communication framework that strategically integrates continual learning (CL) in IoT networks for energy-efficient fault detection. Our framework enables the IoT device and the edge server (ES) to collaboratively update the lightweight ML model by adapting to the wireless link conditions for communication and the available energy budget. Evaluation on real-world datasets show that the proposed approach can outperform both periodic sampling and non-adaptive CL in terms of inference recall; our proposed approach achieves up to a 42.8% improvement, even under tight energy and bandwidth constraint.

Tijana Devaja, Milica Petkovic, Sokol Kosta et al.

This paper analyzes the physical layer security performance of massive uplink Internet of Things (IoT) networks operating under the finite blocklength (FBL) regime. IoT devices and base stations (BS) are modeled using a stochastic geometry approach, while an eavesdropper is placed at a random location around the transmitting device. This system model captures security risks common in dense IoT deployments. Analytical expressions for the secure success probability, secrecy outage probability and secrecy throughput are derived to characterize how stochastic interference, fading and eavesdropper spatial uncertainty interact with FBL constraints in short packet uplink transmissions. Numerical results illustrate key system behavior under different network and channel conditions.

Pietro Danzi, Anders Ellersgaard Kalør, Čedomir Stefanović et al.

Blockchain is a technology uniquely suited to support massive number of transactions and smart contracts within the Internet of Things (IoT) ecosystem, thanks to the decentralized accounting mechanism. In a blockchain network, the states of the accounts are stored and updated by the validator nodes, interconnected in a peer-to-peer fashion. IoT devices are characterized by relatively low computing capabilities and low power consumption, as well as sporadic and low-bandwidth wireless connectivity. An IoT device connects to one or more validator nodes to observe or modify the state of the accounts. In order to interact with the most recent state of accounts, a device needs to be synchronized with the blockchain copy stored by the validator nodes. In this work, we describe general architectures and synchronization protocols that enable synchronization of the IoT endpoints to the blockchain, with different communication costs and security levels. We model and analytically characterize the traffic generated by the synchronization protocols, and also investigate the power consumption and synchronization trade-off via numerical simulations. To the best of our knowledge, this is the first study that rigorously models the role of wireless connectivity in blockchain-powered IoT systems.

Ernane A. Alves Coelho, Dan Wu, Josep M. Guerrero et al.

This paper presents a small-signal analysis of an islanded microgrid composed of two or more voltage source inverters connected in parallel. The primary control of each inverter is integrated through internal current and voltage loops using PR compensators, a virtual impedance, and an external power controller based on frequency and voltage droops. The frequency restoration function is implemented at the secondary control level, which executes a consensus algorithm that consists of a load-frequency control and a single time delay communication network. The consensus network consists of a time-invariant directed graph and the output power of each inverter is the information shared among the units, which is affected by the time delay. The proposed small-signal model is validated through simulation results and experimental results. A root locus analysis is presented that shows the behavior of the system considering control parameters and time delay variation.

Marko Angjelichinoski, Anna Scaglione, Petar Popovski et al.

We propose a decentralized Maximum Likelihood solution for estimating the stochastic renewable power generation and demand in single bus Direct Current (DC) MicroGrids (MGs), with high penetration of droop controlled power electronic converters. The solution relies on the fact that the primary control parameters are set in accordance with the local power generation status of the generators. Therefore, the steady state voltage is inherently dependent on the generation capacities and the load, through a non-linear parametric model, which can be estimated. To have a well conditioned estimation problem, our solution avoids the use of an external communication interface and utilizes controlled voltage disturbances to perform distributed training. Using this tool, we develop an efficient, decentralized Maximum Likelihood Estimator (MLE) and formulate the sufficient condition for the existence of the globally optimal solution. The numerical results illustrate the promising performance of our MLE algorithm.

Pietro Danzi, Cedomir Stefanovic, Lexuan Meng et al.

The secondary control in direct current microgrids (MGs) is used to restore the voltage deviations caused by the primary droop control, where the latter is implemented locally in each distributed generator and reacts to load variations. Numerous recent works propose to implement the secondary control in a distributed fashion, relying on a communication system to achieve consensus among MG units. This paper shows that, if the system is not designed to cope with adversary communication impairments, then a malicious attacker can apply a simple jamming of a few units of the MG and thus compromise the secondary MG control. Compared to other denial-of-service attacks that are oriented against the tertiary control, such as economic dispatch, the attack on the secondary control presented here can be more severe, as it disrupts the basic functionality of the MG.