Alejandro D. Domínguez-García

Baosen Zhang, Albert Y. S. Lam, Alejandro Dominguez-Garcia et al. · stanford

This paper addresses the problem of voltage regulation in power distribution networks with deep-penetration of distributed energy resources, e.g., renewable-based generation, and storage-capable loads such as plug-in hybrid electric vehicles. We cast the problem as an optimization program, where the objective is to minimize the losses in the network subject to constraints on bus voltage magnitudes, limits on active and reactive power injections, transmission line thermal limits and losses. We provide sufficient conditions under which the optimization problem can be solved via its convex relaxation. Using data from existing networks, we show that these sufficient conditions are expected to be satisfied by most networks. We also provide an efficient distributed algorithm to solve the problem. The algorithm adheres to a communication topology described by a graph that is the same as the graph that describes the electrical network topology. We illustrate the operation of the algorithm, including its robustness against communication link failures, through several case studies involving 5-, 34-, and 123-bus power distribution systems.

Nitin H. Vaidya, Christoforos N. Hadjicostis, Alejandro D. Dominguez-Garcia

In this two-part paper, we consider multicomponent systems in which each component can iteratively exchange information with other components in its neighborhood in order to compute, in a distributed fashion, the average of the components' initial values or some other quantity of interest (i.e., some function of these initial values). In particular, we study an iterative algorithm for computing the average of the initial values of the nodes. In this algorithm, each component maintains two sets of variables that are updated via two identical linear iterations. The average of the initial values of the nodes can be asymptotically computed by each node as the ratio of two of the variables it maintains. In the first part of this paper, we show how the update rules for the two sets of variables can be enhanced so that the algorithm becomes tolerant to communication links that may drop packets, independently among them and independently between different transmission times. In this second part, by rewriting the collective dynamics of both iterations, we show that the resulting system is mathematically equivalent to a finite inhomogenous Markov chain whose transition matrix takes one of finitely many values at each step. Then, by using e a coefficients of ergodicity approach, a method commonly used for convergence analysis of Markov chains, we prove convergence of the robustified consensus scheme. The analysis suggests that similar convergence should hold under more general conditions as well.

Alejandro D. Dominguez-Garcia, Christoforos N. Hadjicostis, Nitin H. Vaidya

This two-part paper discusses robustification methodologies for linear-iterative distributed algorithms for consensus and coordination problems in multicomponent systems, in which unreliable communication links may drop packets. We consider a setup where communication links between components can be asymmetric (i.e., component j might be able to send information to component i, but not necessarily vice-versa), so that the information exchange between components in the system is in general described by a directed graph that is assumed to be strongly connected. In the absence of communication link failures, each component i maintains two auxiliary variables and updates each of their values to be a linear combination of their corresponding previous values and the corresponding previous values of neighboring components (i.e., components that send information to node i). By appropriately initializing these two (decoupled) iterations, the system components can asymptotically calculate variables of interest in a distributed fashion; in particular, the average of the initial conditions can be calculated as a function that involves the ratio of these two auxiliary variables. The focus of this paper to robustify this double-iteration algorithm against communication link failures. We achieve this by modifying the double-iteration algorithm (by introducing some additional auxiliary variables) and prove that the modified double-iteration converges almost surely to average consensus. In the first part of the paper, we study the first and second moments of the two iterations, and use them to establish convergence, and illustrate the performance of the algorithm with several numerical examples. In the second part, in order to establish the convergence of the algorithm, we use coefficients of ergodicity commonly used in analyzing inhomogeneous Markov chains.

Dariush Fooladivanda, Alejandro D. Domínguez-García, Peter W. Sauer

Renewable surplus power is increasing due to the increasing penetration of these intermittent resources. In practice, electric grid operators either curtail the surplus energy resulting from renewable-based generations or utilize energy storage resources to absorb it. In this paper, we propose a framework for utilizing water pumps and tanks in water supply networks to absorb the surplus electrical energy resulting from renewable-based electricity generation resources in the electrical grid. We model water supply networks analytically, and propose a two-step procedure that utilizes the water tanks in the water supply network to harvest the surplus energy from an electrical grid. In each step, the water network operator needs to solve an optimization problem that is non-convex. To compute optimal pump schedules and water flows, we develop a second-order cone relaxation and an approximation technique that enable us to transform the proposed problems into mixed-integer second-order cone programs. We then provide the conditions under which the proposed relaxation is exact, and present an algorithm for constructing an exact solution to the original problem from a solution to the relaxed problem. We demonstrate the effectiveness of the proposed framework via numerical simulations.

Olaoluwapo Ajala, Alejandro Dominguez-garcia, Peter Sauer et al.

This paper presents a library of second-order models for synchronous machines that can be utilized in power system dynamic performance analysis and control design tasks. The models have a similar structure to the classical model in that they consist of two dynamic states, the power angle and the angular speed. However, unlike the classical model, the models find applications beyond first swing stability analysis; for example, they can also be utilized in transient stability studies. The models are developed through a systematic reduction of a nineteenth-order model, using singular perturbation techniques, and they are validated by comparing their voltage, frequency, and phase profiles with that of the high-order model and that of the classical model.

Madi Zholbaryssov, Alejandro D. Dominguez-Garcia

In this paper, we consider the problem of optimally coordinating the response of a group of distributed energy resources (DERs) in distribution systems by solving the so-called optimal power flow (OPF) problem. The OPF problem is concerned with determining an optimal operating point, at which some cost function, e.g., generation cost or power losses, is minimized, and operational constraints are satisfied. To solve the OPF problem, we propose distributed algorithms that are able to operate over time-varying communication networks and have geometric convergence rate. We solve the second-order cone program (SOCP) relaxation of the OPF problem for radial distribution systems, which is formulated using the so-called DistFlow model. Theoretical results are further supported by the numerical simulations.

Josh A. Taylor, Alejandro D. Domínguez-García

We derive distance relay characteristics in terms of incremental quantities. The characteristics are operating-point independent in that they depend on the network structure and types of sources, but not their real-time voltages or current injections.

Hanchen Xu, Alejandro D. Domínguez-García, Peter W. Sauer

In this paper, we address the problem of setting the tap positions of load tap changers (LTCs) for voltage regulation in radial power distribution systems under uncertain load dynamics. The objective is to find a policy to determine the tap positions that only uses measurements of voltage magnitudes and topology information so as to minimize the voltage deviation across the system. We formulate this problem as a Markov decision process (MDP), and propose a batch reinforcement learning (RL) algorithm to solve it. By taking advantage of a linearized power flow model, we propose an effective algorithm to estimate the voltage magnitudes under different tap settings, which allows the RL algorithm to explore the state and action spaces freely offline without impacting the system operation. To circumvent the "curse of dimensionality" resulted from the large state and action spaces, we propose a sequential learning algorithm to learn an action-value function for each LTC, based on which the optimal tap positions can be directly determined. The effectiveness of the proposed algorithm is validated via numerical simulations on the IEEE 13-bus and 123-bus distribution test feeders.