Ruihang Chu

Yiming Ren, Yiran Xu, Zicheng Lin et al.

We identify a new dimension for enhancing rollout diversity in Group Relative Policy Optimization (GRPO) for LLMs. While GRPO relies on diverse rollouts, prevailing strategies primarily increase diversity by injecting more token-level randomness, which may introduce step-wise noise and lead to incoherent trajectories. We uncover that smaller models within the same model family inherently exhibit higher policy-level diversity, indicated by their superior pass@k relative to larger counterparts as sample counts increase. Unlike token-level noise, this diversity is temporally correlated, preserves logical consistency, and provides structured exploration signals for gradient estimation. We thus propose S2L-PO (Small-to-Large Policy Optimization), a framework that leverages fixed small models as natural explorers to train larger models. To balance exploration and exploitation, we design a progressive annealing strategy that transitions from offline small-model rollouts to the large learner's own sampling. This shift elegantly avoids mid-training performance drops caused by the small model's capacity limits, achieving faster convergence and unlocking a higher performance ceiling. S2L-PO improves accuracy on diverse mathematical reasoning benchmarks (e.g., +8.8% on AIME 24 using a 1.7B explorer to guide the 8B model) while reducing rollout compute.

Xin Lai, Yuhui Yuan, Ruihang Chu et al.

Recently, transformer-based methods have dominated 3D instance segmentation, where mask attention is commonly involved. Specifically, object queries are guided by the initial instance masks in the first cross-attention, and then iteratively refine themselves in a similar manner. However, we observe that the mask-attention pipeline usually leads to slow convergence due to low-recall initial instance masks. Therefore, we abandon the mask attention design and resort to an auxiliary center regression task instead. Through center regression, we effectively overcome the low-recall issue and perform cross-attention by imposing positional prior. To reach this goal, we develop a series of position-aware designs. First, we learn a spatial distribution of 3D locations as the initial position queries. They spread over the 3D space densely, and thus can easily capture the objects in a scene with a high recall. Moreover, we present relative position encoding for the cross-attention and iterative refinement for more accurate position queries. Experiments show that our approach converges 4x faster than existing work, sets a new state of the art on ScanNetv2 3D instance segmentation benchmark, and also demonstrates superior performance across various datasets. Code and models are available at https://github.com/dvlab-research/Mask-Attention-Free-Transformer.

Shentong Mo, Enze Xie, Ruihang Chu et al.

Recent Diffusion Transformers (e.g., DiT) have demonstrated their powerful effectiveness in generating high-quality 2D images. However, it is still being determined whether the Transformer architecture performs equally well in 3D shape generation, as previous 3D diffusion methods mostly adopted the U-Net architecture. To bridge this gap, we propose a novel Diffusion Transformer for 3D shape generation, namely DiT-3D, which can directly operate the denoising process on voxelized point clouds using plain Transformers. Compared to existing U-Net approaches, our DiT-3D is more scalable in model size and produces much higher quality generations. Specifically, the DiT-3D adopts the design philosophy of DiT but modifies it by incorporating 3D positional and patch embeddings to adaptively aggregate input from voxelized point clouds. To reduce the computational cost of self-attention in 3D shape generation, we incorporate 3D window attention into Transformer blocks, as the increased 3D token length resulting from the additional dimension of voxels can lead to high computation. Finally, linear and devoxelization layers are used to predict the denoised point clouds. In addition, our transformer architecture supports efficient fine-tuning from 2D to 3D, where the pre-trained DiT-2D checkpoint on ImageNet can significantly improve DiT-3D on ShapeNet. Experimental results on the ShapeNet dataset demonstrate that the proposed DiT-3D achieves state-of-the-art performance in high-fidelity and diverse 3D point cloud generation. In particular, our DiT-3D decreases the 1-Nearest Neighbor Accuracy of the state-of-the-art method by 4.59 and increases the Coverage metric by 3.51 when evaluated on Chamfer Distance.

Ruihang Chu, Enze Xie, Shentong Mo et al.

We introduce a new diffusion-based approach for shape completion on 3D range scans. Compared with prior deterministic and probabilistic methods, we strike a balance between realism, multi-modality, and high fidelity. We propose DiffComplete by casting shape completion as a generative task conditioned on the incomplete shape. Our key designs are two-fold. First, we devise a hierarchical feature aggregation mechanism to inject conditional features in a spatially-consistent manner. So, we can capture both local details and broader contexts of the conditional inputs to control the shape completion. Second, we propose an occupancy-aware fusion strategy in our model to enable the completion of multiple partial shapes and introduce higher flexibility on the input conditions. DiffComplete sets a new SOTA performance (e.g., 40% decrease on l_1 error) on two large-scale 3D shape completion benchmarks. Our completed shapes not only have a realistic outlook compared with the deterministic methods but also exhibit high similarity to the ground truths compared with the probabilistic alternatives. Further, DiffComplete has strong generalizability on objects of entirely unseen classes for both synthetic and real data, eliminating the need for model re-training in various applications.

Tao Hu, Xiaogang Xu, Ruihang Chu et al.

Existing learning-based methods for point cloud rendering adopt various 3D representations and feature querying mechanisms to alleviate the sparsity problem of point clouds. However, artifacts still appear in rendered images, due to the challenges in extracting continuous and discriminative 3D features from point clouds. In this paper, we present a dense while lightweight 3D representation, named TriVol, that can be combined with NeRF to render photo-realistic images from point clouds. Our TriVol consists of triple slim volumes, each of which is encoded from the point cloud. TriVol has two advantages. First, it fuses respective fields at different scales and thus extracts local and non-local features for discriminative representation. Second, since the volume size is greatly reduced, our 3D decoder can be efficiently inferred, allowing us to increase the resolution of the 3D space to render more point details. Extensive experiments on different benchmarks with varying kinds of scenes/objects demonstrate our framework's effectiveness compared with current approaches. Moreover, our framework has excellent generalization ability to render a category of scenes/objects without fine-tuning.

Ruilin Luo, Chufan Shi, Yizhen Zhang et al.

The cold-start initialization stage plays a pivotal role in training Multimodal Large Reasoning Models (MLRMs), yet its mechanisms remain insufficiently understood. To analyze this stage, we introduce the Visual Attention Score (VAS), an attention-based metric that quantifies how much a model attends to visual tokens. We find that reasoning performance is strongly correlated with VAS (r=0.9616): models with higher VAS achieve substantially stronger multimodal reasoning. Surprisingly, multimodal cold-start fails to elevate VAS, resulting in attention distributions close to the base model, whereas text-only cold-start leads to a clear increase. We term this counter-intuitive phenomenon Lazy Attention Localization. To validate its causal role, we design training-free interventions that directly modulate attention allocation during inference, performance gains of 1$-$2% without any retraining. Building on these insights, we further propose Attention-Guided Visual Anchoring and Reflection (AVAR), a comprehensive cold-start framework that integrates visual-anchored data synthesis, attention-guided objectives, and visual-anchored reward shaping. Applied to Qwen2.5-VL-7B, AVAR achieves an average gain of 7.0% across 7 multimodal reasoning benchmarks. Ablation studies further confirm that each component of AVAR contributes step-wise to the overall gains. The code, data, and models are available at https://github.com/lrlbbzl/Qwen-AVAR.

Xiang Wang, Shiwei Zhang, Haonan Qiu et al.

The field of controllable human-centric video generation has witnessed remarkable progress, particularly with the advent of diffusion models. However, achieving precise and localized control over human motion in videos, such as replacing or inserting individuals while preserving desired motion patterns, still remains a formidable challenge. In this work, we present the ReplaceAnyone framework, which focuses on localized human replacement and insertion featuring intricate backgrounds. Specifically, we formulate this task as an image-conditioned video inpainting paradigm with pose guidance, utilizing a unified end-to-end video diffusion architecture that facilitates image-conditioned video inpainting within masked regions. To prevent shape leakage and enable granular local control, we introduce diverse mask forms involving both regular and irregular shapes. Furthermore, we implement an enriched visual guidance mechanism to enhance appearance alignment, a hybrid inpainting encoder to further preserve the detailed background information in the masked video, and a two-phase optimization methodology to simplify the training difficulty. ReplaceAnyone enables seamless replacement or insertion of characters while maintaining the desired pose motion and reference appearance within a single framework. Extensive experimental results demonstrate the effectiveness of our method in generating realistic and coherent video content. The proposed ReplaceAnyone can be seamlessly applied not only to traditional 3D-UNet base models but also to DiT-based video models such as Wan2.1. The code will be available at https://github.com/ali-vilab/UniAnimate-DiT.

Yujie Wei, Yujin Han, Zhekai Chen et al.

Video generation is rapidly evolving from single-shot synthesis to complex multi-shot audio-video (MSAV) narratives to meet real-world demands. However, evaluating such frontier models remains a fundamental challenge. Existing benchmarks are limited in scope and data diversity, and rely on rigid evaluation pipelines, preventing systematic and reliable assessment of modern MSAV models. To bridge these gaps, we introduce MSAVBench, the first comprehensive benchmark and adaptive hybrid evaluation framework for multi-shot audio-video generation. Our benchmark spans four key dimensions, video, audio, shot, and reference, covering diverse task settings, varying shot counts of up to 15, and challenging non-realistic scenarios. Our evaluation framework improves robustness through an adaptive self-correction mechanism for shot segmentation, instance-wise rubrics for subjective metrics, and tool-grounded evidence extraction for complex judgments. Furthermore, MSAVBench achieves high alignment with human judgments, reaching a Spearman rank correlation of 91.5%. Our systematic evaluation of 19 state-of-the-art closed- and open-source models shows that current systems still struggle with director-level control and fine-grained audio-visual synchronization, while modular or agentic generation pipelines offer a promising path toward narrowing the gap between open- and closed-source models. We will release the benchmark data and evaluation code to facilitate future research.

Team Wan, Ang Wang, Baole Ai et al.

This report presents Wan, a comprehensive and open suite of video foundation models designed to push the boundaries of video generation. Built upon the mainstream diffusion transformer paradigm, Wan achieves significant advancements in generative capabilities through a series of innovations, including our novel VAE, scalable pre-training strategies, large-scale data curation, and automated evaluation metrics. These contributions collectively enhance the model's performance and versatility. Specifically, Wan is characterized by four key features: Leading Performance: The 14B model of Wan, trained on a vast dataset comprising billions of images and videos, demonstrates the scaling laws of video generation with respect to both data and model size. It consistently outperforms the existing open-source models as well as state-of-the-art commercial solutions across multiple internal and external benchmarks, demonstrating a clear and significant performance superiority. Comprehensiveness: Wan offers two capable models, i.e., 1.3B and 14B parameters, for efficiency and effectiveness respectively. It also covers multiple downstream applications, including image-to-video, instruction-guided video editing, and personal video generation, encompassing up to eight tasks. Consumer-Grade Efficiency: The 1.3B model demonstrates exceptional resource efficiency, requiring only 8.19 GB VRAM, making it compatible with a wide range of consumer-grade GPUs. Openness: We open-source the entire series of Wan, including source code and all models, with the goal of fostering the growth of the video generation community. This openness seeks to significantly expand the creative possibilities of video production in the industry and provide academia with high-quality video foundation models. All the code and models are available at https://github.com/Wan-Video/Wan2.1.

Yanwei Li, Yuechen Zhang, Chengyao Wang et al.

In this work, we introduce Mini-Gemini, a simple and effective framework enhancing multi-modality Vision Language Models (VLMs). Despite the advancements in VLMs facilitating basic visual dialog and reasoning, a performance gap persists compared to advanced models like GPT-4 and Gemini. We try to narrow the gap by mining the potential of VLMs for better performance and any-to-any workflow from three aspects, i.e., high-resolution visual tokens, high-quality data, and VLM-guided generation. To enhance visual tokens, we propose to utilize an additional visual encoder for high-resolution refinement without increasing the visual token count. We further construct a high-quality dataset that promotes precise image comprehension and reasoning-based generation, expanding the operational scope of current VLMs. In general, Mini-Gemini further mines the potential of VLMs and empowers current frameworks with image understanding, reasoning, and generation simultaneously. Mini-Gemini supports a series of dense and MoE Large Language Models (LLMs) from 2B to 34B. It is demonstrated to achieve leading performance in several zero-shot benchmarks and even surpasses the developed private models. Code and models are available at https://github.com/dvlab-research/MiniGemini.

Yang Ding, Yizhen Zhang, Xin Lai et al.

Multimodal Large Language Models (MLLMs) have achieved remarkable progress in vision-language tasks yet remain limited in long video understanding due to the limited context window. Consequently, prevailing approaches tend to rely on uniform frame sampling or static pre-selection, which might overlook critical evidence and unable to correct its initial selection error during its reasoning process. To overcome these limitations, we propose VideoZoomer, a novel agentic framework that enables MLLMs to dynamically control their visual focus during reasoning. Starting from a coarse low-frame-rate overview, VideoZoomer invokes a temporal zoom tool to obtain high-frame-rate clips at autonomously chosen moments, thereby progressively gathering fine-grained evidence in a multi-turn interactive manner. Accordingly, we adopt a two-stage training strategy: a cold-start supervised fine-tuning phase on a curated dataset of distilled exemplar and reflection trajectories, followed by reinforcement learning to further refine the agentic policy. Extensive experiments demonstrate that our 7B model delivers diverse and complex reasoning patterns, yielding strong performance across a broad set of long video understanding and reasoning benchmarks. These emergent capabilities allow it to consistently surpass existing open-source models and even rival proprietary systems on challenging tasks, while achieving superior efficiency under reduced frame budgets.

Yujie Wei, Xinyu Liu, Shiwei Zhang et al.

While large-scale diffusion models have revolutionized video synthesis, achieving precise control over both multi-subject identity and multi-granularity motion remains a significant challenge. Recent attempts to bridge this gap often suffer from limited motion granularity, control ambiguity, and identity degradation, leading to suboptimal performance on identity preservation and motion control. In this work, we present DreamVideo-Omni, a unified framework enabling harmonious multi-subject customization with omni-motion control via a progressive two-stage training paradigm. In the first stage, we integrate comprehensive control signals for joint training, encompassing subject appearances, global motion, local dynamics, and camera movements. To ensure robust and precise controllability, we introduce a condition-aware 3D rotary positional embedding to coordinate heterogeneous inputs and a hierarchical motion injection strategy to enhance global motion guidance. Furthermore, to resolve multi-subject ambiguity, we introduce group and role embeddings to explicitly anchor motion signals to specific identities, effectively disentangling complex scenes into independent controllable instances. In the second stage, to mitigate identity degradation, we design a latent identity reward feedback learning paradigm by training a latent identity reward model upon a pretrained video diffusion backbone. This provides motion-aware identity rewards in the latent space, prioritizing identity preservation aligned with human preferences. Supported by our curated large-scale dataset and the comprehensive DreamOmni Bench for multi-subject and omni-motion control evaluation, DreamVideo-Omni demonstrates superior performance in generating high-quality videos with precise controllability.

Jialiang Yang, Bin Xia, Ruihang Chu et al.

Rapid advances in audio-video (AV) generation have enabled high-fidelity synthesis with synchronized sound, particularly for human-related scenarios involving speech and interactions. Yet evaluation for AV generation remains at an early stage, with only a few coarse-grained benchmarks for human-related scenarios and relying on limited preset evaluations with generic multimodal LLMs, leading to inaccurate assessments of model capabilities. To address these issues, we introduce AVBench, a fully automated benchmark tailored for human-centric AV generation. AVBench is built on two key designs for comprehensive and accurate evaluation: (i) Human-centric and fine-grained metrics. AVBench integrates ten evaluation dimensions designed for human-centered real-world scenarios, covering visual quality, audio quality, and multi-level consistency across modalities. These practical metrics capture human-related details that existing benchmarks often overlook. (ii) Specialized evaluators via preference learning. To address the lack of specialized training data, we construct large-scale supervision by transforming real-world videos into diverse training pairs with controlled perturbations. After fine-tuning on this high-quality dataset, the evaluators learn to reliably detect subtle cross-modal inconsistencies. Crucially, instead of producing discrete textual judgment, AVBench derives continuous evaluation scores from the model's prediction confidence on binary decisions. This probabilistic scoring mechanism enables a more reliable assessment than traditional VQA-style evaluation and aligns closely with human judgment. Taken together, AVBench offers automated evaluation for AV generation, demonstrates strong potential for data filtering, and serves as a differentiable reward signal for Reinforcement Learning from Human Feedback (RLHF).

Wentao Xiang, Haokang Zhang, Tianhang Yang et al.

Object-goal navigation in open-vocabulary settings requires agents to locate novel objects in unseen environments, yet existing approaches suffer from opaque decision-making processes and low success rate on locating unseen objects. To address these challenges, we propose Nav-$R^2$, a framework that explicitly models two critical types of relationships, target-environment modeling and environment-action planning, through structured Chain-of-Thought (CoT) reasoning coupled with a Similarity-Aware Memory. We construct a Nav$R^2$-CoT dataset that teaches the model to perceive the environment, focus on target-related objects in the surrounding context and finally make future action plans. Our SA-Mem preserves the most target-relevant and current observation-relevant features from both temporal and semantic perspectives by compressing video frames and fusing historical observations, while introducing no additional parameters. Compared to previous methods, Nav-R^2 achieves state-of-the-art performance in localizing unseen objects through a streamlined and efficient pipeline, avoiding overfitting to seen object categories while maintaining real-time inference at 2Hz. Resources will be made publicly available at \href{https://github.com/AMAP-EAI/Nav-R2}{github link}.

Ruihang Chu, Yefei He, Zhekai Chen et al.

We present Wan-Move, a simple and scalable framework that brings motion control to video generative models. Existing motion-controllable methods typically suffer from coarse control granularity and limited scalability, leaving their outputs insufficient for practical use. We narrow this gap by achieving precise and high-quality motion control. Our core idea is to directly make the original condition features motion-aware for guiding video synthesis. To this end, we first represent object motions with dense point trajectories, allowing fine-grained control over the scene. We then project these trajectories into latent space and propagate the first frame's features along each trajectory, producing an aligned spatiotemporal feature map that tells how each scene element should move. This feature map serves as the updated latent condition, which is naturally integrated into the off-the-shelf image-to-video model, e.g., Wan-I2V-14B, as motion guidance without any architecture change. It removes the need for auxiliary motion encoders and makes fine-tuning base models easily scalable. Through scaled training, Wan-Move generates 5-second, 480p videos whose motion controllability rivals Kling 1.5 Pro's commercial Motion Brush, as indicated by user studies. To support comprehensive evaluation, we further design MoveBench, a rigorously curated benchmark featuring diverse content categories and hybrid-verified annotations. It is distinguished by larger data volume, longer video durations, and high-quality motion annotations. Extensive experiments on MoveBench and the public dataset consistently show Wan-Move's superior motion quality. Code, models, and benchmark data are made publicly available.

Yukang Chen, Luozhou Wang, Wei Huang et al.

We present LongLive-2.0, an NVFP4-based parallel infrastructure throughout the full training and inference workflow of long video generation, addressing speed and memory bottlenecks. For training, we introduce sequence-parallel autoregressive (AR) training, instantiated as Balanced SP, which co-designs the efficient teacher-forcing layout with SP execution by pairing clean-history and noisy-target temporal chunks on each rank, enabling a natural teacher-forcing mask with SP-aware chunked VAE encoding. Combined with NVFP4 precision, it reduces GPU memory cost and accelerates GEMM computation during training, the proportion of which increases as video length grows. Moreover, we show that a high-quality infrastructure and dataset enable a remarkably clean training pipeline. Unlike existing Self-Forcing series methods that rely on ODE initialization and subsequent distribution matching distillation (DMD), LongLive-2.0 directly tunes a diffusion model into a long, multi-shot, interactive auto-regressive (AR) diffusion model. It can be further converted to real-time generation (4 to 2 denoising steps) with standalone LoRA weights. For inference on Blackwell GPUs, we enable W4A4 NVFP4 inference, quantize KV cache into NVFP4 for memory savings, and boost end-to-end throughput with asynchronous streaming VAE decoding. On non-Blackwell GPU architectures, we deploy SP inference to match the speed on Blackwell GPUs, while the quantized KV cache can lower inter-GPU communication of SP. Experiments show up to 2.15x speedup in training, and 1.84x in inference. LongLive-2.0-5B achieves 45.7 FPS inference while attaining strong performance on benchmarks. To our knowledge, LongLive-2.0 is the first NVFP4 training and inference system for long video generation.

Bin Xia, Bohao Peng, Jiyang Liu et al.

Recently unified generation and editing models have achieved remarkable success with their impressive performance. These models rely mainly on text prompts for instruction-based editing and generation, but language often fails to capture users intended edit locations and fine-grained visual details. To this end, we propose two tasks: scribble-based editing and generation, that enables more flexible creation on graphical user interface (GUI) combining user textual, images, and freehand sketches. We introduce DreamOmni3, tackling two challenges: data creation and framework design. Our data synthesis pipeline includes two parts: scribble-based editing and generation. For scribble-based editing, we define four tasks: scribble and instruction-based editing, scribble and multimodal instruction-based editing, image fusion, and doodle editing. Based on DreamOmni2 dataset, we extract editable regions and overlay hand-drawn boxes, circles, doodles or cropped image to construct training data. For scribble-based generation, we define three tasks: scribble and instruction-based generation, scribble and multimodal instruction-based generation, and doodle generation, following similar data creation pipelines. For the framework, instead of using binary masks, which struggle with complex edits involving multiple scribbles, images, and instructions, we propose a joint input scheme that feeds both the original and scribbled source images into the model, using different colors to distinguish regions and simplify processing. By applying the same index and position encodings to both images, the model can precisely localize scribbled regions while maintaining accurate editing. Finally, we establish comprehensive benchmarks for these tasks to promote further research. Experimental results demonstrate that DreamOmni3 achieves outstanding performance, and models and code will be publicly released.

Yu Li, Yifan Chen, Gongye Liu et al.

Layout generation is a foundation task of graphic design, which requires the integration of visual aesthetics and harmonious expression of content delivery. However, existing methods still face challenges in generating precise and visually appealing layouts, including blocking, overlapping, small-sized, or spatial misalignment. We found that these methods overlook the crucial balance between learning content-aware and graphic-aware features. This oversight results in their limited ability to model the graphic structure of layouts and generate reasonable layout arrangements. To address these challenges, we introduce LayoutDiT, an effective framework that balances content and graphic features to generate high-quality, visually appealing layouts. Specifically, we first design an adaptive factor that optimizes the model's awareness of the layout generation space, balancing the model's performance in both content and graphic aspects. Secondly, we introduce a graphic condition, the saliency bounding box, to bridge the modality difference between images in the visual domain and layouts in the geometric parameter domain. In addition, we adapt a diffusion transformer model as the backbone, whose powerful generative capability ensures the quality of layout generation. Benefiting from the properties of diffusion models, our method excels in constrained settings without introducing additional constraint modules. Extensive experimental results demonstrate that our method achieves superior performance in both constrained and unconstrained settings, significantly outperforming existing methods.

Quanhao Li, Junqiu Yu, Kaixun Jiang et al.

Reinforcement learning has emerged as a powerful tool for improving diffusion-based text-to-image models, but existing methods are largely limited to single-task optimization. Extending RL to multiple tasks is challenging: joint optimization suffers from cross-task interference and imbalance, while cascade RL is cumbersome and prone to catastrophic forgetting. We propose DiffusionOPD, a new multi-task training paradigm for diffusion models based on Online Policy Distillation (OPD). DiffusionOPD first trains task-specific teachers independently, then distills their capabilities into a unified student along the student own rollout trajectories. This decouples single-task exploration from multi-task integration and avoids the optimization burden of solving all tasks jointly from scratch. Theoretically, we lift the OPD framework from discrete tokens to continuous-state Markov processes, deriving a closed-form per-step KL objective that unifies both stochastic SDE and deterministic ODE refinement via mean-matching. We formally and empirically demonstrate that this analytic gradient provides lower variance and better generality compared to conventional PPO-style policy gradients. Extensive experiments show that DiffusionOPD consistently surpasses both multi-reward RL and cascade RL baselines in training efficiency and final performance, while achieving state-of-the-art results on all evaluated benchmarks.

Xiaogang Xu, Ruihang Chu, Jian Wang et al.

Reinforcement Learning (RL) has recently been incorporated into diffusion models, e.g., tasks such as text-to-image. However, directly applying existing RL methods to diffusion-based image restoration models is suboptimal, as the objective of restoration fundamentally differs from that of pure generation: it places greater emphasis on fidelity. In this paper, we investigate how to effectively integrate RL into diffusion-based restoration models. First, through extensive experiments with various reward functions, we find that an effective reward can be derived from an Image Quality Assessment (IQA) model, instead of intuitive ground-truth-based supervision, which has already been optimized during the Supervised Fine-Tuning (SFT) stage prior to RL. Moreover, our strategy focuses on using RL for challenging samples that are significantly distant from the ground truth, and our RL approach is innovatively implemented using MLLM-based IQA models to align distributions with high-quality images initially. As the samples approach the ground truth's distribution, RL is adaptively combined with SFT for more fine-grained alignment. This dynamic process is facilitated through an automatic weighting strategy that adjusts based on the relative difficulty of the training samples. Our strategy is plug-and-play that can be seamlessly applied to diffusion-based restoration models, boosting its performance across various restoration tasks. Extensive experiments across multiple benchmarks demonstrate the effectiveness of our proposed RL framework.

Ruixu Zhang, Deyi Ji, Lanyun Zhu et al.

Self-evolution offers a promising path for improving reasoning models without relying on intensive human annotation. However, extending this paradigm to video understanding remains underexplored and challenging: videos are long, dynamic, and redundant, while the evidence needed for reasoning is often sparse and temporally localized. Naively generating difficult question-answer pairs from full videos can therefore produce supervision that appears challenging but is weakly grounded, relying on static cues or language priors rather than temporal evidence. In this work, we argue that the key bottleneck of video self-evolution is not difficulty alone, but grounding. We propose Video-Zero, an annotation-free Questioner--Solver co-evolution framework that centers self-evolution on temporally localized evidence. The Questioner discovers informative evidence segments and generates evidence-grounded questions, while the Solver learns to answer and align its predictions with the supporting evidence. This closes an iterative loop of evidence discovery, grounded supervision, and evidence-aligned learning. Across 13 benchmarks spanning temporal grounding, long-video understanding, and video reasoning, Video-Zero consistently improves multiple video VLM backbones, demonstrating the effectiveness and transferability of evidence-centered self-evolution.

Zhekai Chen, Ruihang Chu, Yukang Chen et al.

Scaling visual generation models is essential for real-world content creation, yet requires substantial training and computational expenses. Alternatively, test-time scaling has garnered growing attention due to resource efficiency and promising performance. In this work, we present TTS-VAR, the first general test-time scaling framework for visual auto-regressive (VAR) models, modeling the generation process as a path searching problem. To dynamically balance computational efficiency with exploration capacity, we first introduce an adaptive descending batch size schedule throughout the causal generation process. Besides, inspired by VAR's hierarchical coarse-to-fine multi-scale generation, our framework integrates two key components: (i) At coarse scales, we observe that generated tokens are hard for evaluation, possibly leading to erroneous acceptance of inferior samples or rejection of superior samples. Noticing that the coarse scales contain sufficient structural information, we propose clustering-based diversity search. It preserves structural variety through semantic feature clustering, enabling later selection on samples with higher potential. (ii) In fine scales, resampling-based potential selection prioritizes promising candidates using potential scores, which are defined as reward functions incorporating multi-scale generation history. Experiments on the powerful VAR model Infinity show a notable 8.7% GenEval score improvement (from 0.69 to 0.75). Key insights reveal that early-stage structural features effectively influence final quality, and resampling efficacy varies across generation scales. Code is available at https://github.com/ali-vilab/TTS-VAR.

Jie Wu, Haoling Li, Xin Zhang et al.

Preference learning extends the performance of Code LLMs beyond traditional supervised fine-tuning by leveraging relative quality comparisons. In existing approaches, a set of n candidate solutions is evaluated based on test case success rates, with the candidate demonstrating a higher pass rate being labeled as positive and its counterpart with a lower pass rate as negative. However, because this approach aligns entire failing code blocks rather than pinpointing specific errors, it lacks the granularity necessary to capture meaningful error-correction relationships. As a result, the model is unable to learn more informative error-correction patterns. To address these issues, we propose Target-DPO, a new preference alignment framework that mimics human iterative debugging to refine Code LLMs. Target-DPO explicitly locates error regions and aligns the corresponding tokens via a tailored DPO algorithm. To facilitate it, we introduce the CodeFlow dataset, where samples are iteratively refined until passing tests, with modifications capturing error corrections. Extensive experiments show that a diverse suite of Code LLMs equipped with Target-DPO achieves significant performance gains in code generation and improves on challenging tasks like BigCodeBench. In-depth analysis reveals that Target-DPO yields fewer errors. Code, model and datasets are in: https://github.com/JieWu02/Target-DPO.

Yukang Chen, Yanwei Li, Tao Kong et al.

We propose Scale-aware AutoAug to learn data augmentation policies for object detection. We define a new scale-aware search space, where both image- and box-level augmentations are designed for maintaining scale invariance. Upon this search space, we propose a new search metric, termed Pareto Scale Balance, to facilitate search with high efficiency. In experiments, Scale-aware AutoAug yields significant and consistent improvement on various object detectors (e.g., RetinaNet, Faster R-CNN, Mask R-CNN, and FCOS), even compared with strong multi-scale training baselines. Our searched augmentation policies are transferable to other datasets and box-level tasks beyond object detection (e.g., instance segmentation and keypoint estimation) to improve performance. The search cost is much less than previous automated augmentation approaches for object detection. It is notable that our searched policies have meaningful patterns, which intuitively provide valuable insight for human data augmentation design. Code and models will be available at https://github.com/Jia-Research-Lab/SA-AutoAug.

Hao Liu, Yuxuan Lin, Jingfeng Guo et al.

Editing a 3D asset locally, modifying a target region while preserving the rest, is a fundamental requirement of native 3D editing. Existing methods enforce locality through mechanisms external to the generator, such as manual 3D masks, post-hoc voxel merging, or 2D multi-view lifting. None of them intervene where the corruption actually originates: inside the ODE sampler. For a rectified-flow generator to achieve faithful local editing, its velocity field should be strong over the target editing region while vanishing on preserved content. Yet a single velocity field can hardly satisfy both requirements simultaneously, leading to three problems: (i) identity leakage that keeps the edit signal non-zero on preserved regions; (ii) no dedicated edit-amplification channel, so strengthening the edit inevitably perturbs identity; and (iii) an identity drag at the geometry and material stages, where a global condition pulls every token toward the target. We propose VS3D (Velocity-Space 3D Asset editing}), an inversion-free, training-free, and mask-free framework that addresses each problem with a targeted intervention inside the sampler. VS3D integrates three complementary modules, each corresponding to a specific stage of the editing pipeline. Reconstruction-Anchored Source Injection (RASI) absorbs identity leakage by turning the unconditional embedding into a per-step, asset-specific anchor calibrated through source reconstruction. Partial-Mean Guidance (PMG) amplifies the edit signal by contrasting high- and low-quality subsample estimates of the velocity difference, active only where a consistent edit exists. Twin-Agreement Residual injection (TAR) lets the sampler decide token by token what to preserve at the geometry and material stages.

Yiming Ren, Junjie Wang, Yuxin Meng et al.

Evaluating whether multimodal large language models truly understand long-form scientific papers remains challenging: answer-only metrics and synthetic "Needle-In-A-Haystack" tests often reward answer matching without requiring a causal, evidence-linked reasoning trace in the document. We propose the "Fish-in-the-Ocean" (FITO) paradigm, which requires models to construct explicit cross-modal evidence chains within native scientific documents. To operationalize FITO, we build SIN-Data, a scientific interleaved corpus that preserves the native interleaving of text and figures. On top of it, we construct SIN-Bench with four progressive tasks covering evidence discovery (SIN-Find), hypothesis verification (SIN-Verify), grounded QA (SIN-QA), and evidence-anchored synthesis (SIN-Summary). We further introduce "No Evidence, No Score", scoring predictions when grounded to verifiable anchors and diagnosing evidence quality via matching, relevance, and logic. Experiments on eight MLLMs show that grounding is the primary bottleneck: Gemini-3-pro achieves the best average overall score (0.573), while GPT-5 attains the highest SIN-QA answer accuracy (0.767) but underperforms on evidence-aligned overall scores, exposing a gap between correctness and traceable support.

Jiankai Sun, Chuanyang Zheng, Enze Xie et al.

Reasoning, a crucial ability for complex problem-solving, plays a pivotal role in various real-world settings such as negotiation, medical diagnosis, and criminal investigation. It serves as a fundamental methodology in the field of Artificial General Intelligence (AGI). With the ongoing development of foundation models, e.g., Large Language Models (LLMs), there is a growing interest in exploring their abilities in reasoning tasks. In this paper, we introduce seminal foundation models proposed or adaptable for reasoning, highlighting the latest advancements in various reasoning tasks, methods, and benchmarks. We then delve into the potential future directions behind the emergence of reasoning abilities within foundation models. We also discuss the relevance of multimodal learning, autonomous agents, and super alignment in the context of reasoning. By discussing these future research directions, we hope to inspire researchers in their exploration of this field, stimulate further advancements in reasoning with foundation models, and contribute to the development of AGI.

Tianqi Wang, Enze Xie, Ruihang Chu et al.

End-to-end driving has made significant progress in recent years, demonstrating benefits such as system simplicity and competitive driving performance under both open-loop and closed-loop settings. Nevertheless, the lack of interpretability and controllability in its driving decisions hinders real-world deployment for end-to-end driving systems. In this paper, we collect a comprehensive end-to-end driving dataset named DriveCoT, leveraging the CARLA simulator. It contains sensor data, control decisions, and chain-of-thought labels to indicate the reasoning process. We utilize the challenging driving scenarios from the CARLA leaderboard 2.0, which involve high-speed driving and lane-changing, and propose a rule-based expert policy to control the vehicle and generate ground truth labels for its reasoning process across different driving aspects and the final decisions. This dataset can serve as an open-loop end-to-end driving benchmark, enabling the evaluation of accuracy in various chain-of-thought aspects and the final decision. In addition, we propose a baseline model called DriveCoT-Agent, trained on our dataset, to generate chain-of-thought predictions and final decisions. The trained model exhibits strong performance in both open-loop and closed-loop evaluations, demonstrating the effectiveness of our proposed dataset.

Ruilin Luo, Zhuofan Zheng, Yifan Wang et al.

Process Reward Models (PRMs) have shown promise in enhancing the mathematical reasoning capabilities of Large Language Models (LLMs) through Test-Time Scaling (TTS). However, their integration into multimodal reasoning remains largely unexplored. In this work, we take the first step toward unlocking the potential of PRMs in multimodal mathematical reasoning. We identify three key challenges: (1) the scarcity of high-quality reasoning data constrains the capabilities of foundation Multimodal Large Language Models (MLLMs), which imposes further limitations on the upper bounds of TTS and reinforcement learning (RL); (2) a lack of automated methods for process labeling within multimodal contexts persists; (3) the employment of process rewards in unimodal RL faces issues like reward hacking, which may extend to multimodal scenarios. To address these issues, we introduce URSA, a three-stage Unfolding multimodal Process-Supervision Aided training framework. We first construct MMathCoT-1M, a high-quality large-scale multimodal Chain-of-Thought (CoT) reasoning dataset, to build a stronger math reasoning foundation MLLM, URSA-8B. Subsequently, we go through an automatic process to synthesize process supervision data, which emphasizes both logical correctness and perceptual consistency. We introduce DualMath-1.1M to facilitate the training of URSA-8B-RM. Finally, we propose Process-Supervised Group-Relative-Policy-Optimization (PS-GRPO), pioneering a multimodal PRM-aided online RL method that outperforms vanilla GRPO. With PS-GRPO application, URSA-8B-PS-GRPO outperforms Gemma3-12B and GPT-4o by 8.4% and 2.7% on average across 6 benchmarks. Code, data and checkpoint can be found at https://github.com/URSA-MATH.

Minbin Huang, Yanxin Long, Xinchi Deng et al.

Text-to-image (T2I) generation models have significantly advanced in recent years. However, effective interaction with these models is challenging for average users due to the need for specialized prompt engineering knowledge and the inability to perform multi-turn image generation, hindering a dynamic and iterative creation process. Recent attempts have tried to equip Multi-modal Large Language Models (MLLMs) with T2I models to bring the user's natural language instructions into reality. Hence, the output modality of MLLMs is extended, and the multi-turn generation quality of T2I models is enhanced thanks to the strong multi-modal comprehension ability of MLLMs. However, many of these works face challenges in identifying correct output modalities and generating coherent images accordingly as the number of output modalities increases and the conversations go deeper. Therefore, we propose DialogGen, an effective pipeline to align off-the-shelf MLLMs and T2I models to build a Multi-modal Interactive Dialogue System (MIDS) for multi-turn Text-to-Image generation. It is composed of drawing prompt alignment, careful training data curation, and error correction. Moreover, as the field of MIDS flourishes, comprehensive benchmarks are urgently needed to evaluate MIDS fairly in terms of output modality correctness and multi-modal output coherence. To address this issue, we introduce the Multi-modal Dialogue Benchmark (DialogBen), a comprehensive bilingual benchmark designed to assess the ability of MLLMs to generate accurate and coherent multi-modal content that supports image editing. It contains two evaluation metrics to measure the model's ability to switch modalities and the coherence of the output images. Our extensive experiments on DialogBen and user study demonstrate the effectiveness of DialogGen compared with other State-of-the-Art models.

Haonan Qiu, Shiwei Zhang, Yujie Wei et al.

Visual diffusion models achieve remarkable progress, yet they are typically trained at limited resolutions due to the lack of high-resolution data and constrained computation resources, hampering their ability to generate high-fidelity images or videos at higher resolutions. Recent efforts have explored tuning-free strategies to exhibit the untapped potential higher-resolution visual generation of pre-trained models. However, these methods are still prone to producing low-quality visual content with repetitive patterns. The key obstacle lies in the inevitable increase in high-frequency information when the model generates visual content exceeding its training resolution, leading to undesirable repetitive patterns deriving from the accumulated errors. To tackle this challenge, we propose FreeScale, a tuning-free inference paradigm to enable higher-resolution visual generation via scale fusion. Specifically, FreeScale processes information from different receptive scales and then fuses it by extracting desired frequency components. Extensive experiments validate the superiority of our paradigm in extending the capabilities of higher-resolution visual generation for both image and video models. Notably, compared with previous best-performing methods, FreeScale unlocks the 8k-resolution text-to-image generation for the first time.

Junsong Chen, Yuyang Zhao, Jincheng Yu et al.

We introduce SANA-Video, a small diffusion model that can efficiently generate videos up to 720x1280 resolution and minute-length duration. SANA-Video synthesizes high-resolution, high-quality and long videos with strong text-video alignment at a remarkably fast speed, deployable on RTX 5090 GPU. Two core designs ensure our efficient, effective and long video generation: (1) Linear DiT: We leverage linear attention as the core operation, which is more efficient than vanilla attention given the large number of tokens processed in video generation. (2) Constant-Memory KV cache for Block Linear Attention: we design block-wise autoregressive approach for long video generation by employing a constant-memory state, derived from the cumulative properties of linear attention. This KV cache provides the Linear DiT with global context at a fixed memory cost, eliminating the need for a traditional KV cache and enabling efficient, minute-long video generation. In addition, we explore effective data filters and model training strategies, narrowing the training cost to 12 days on 64 H100 GPUs, which is only 1% of the cost of MovieGen. Given its low cost, SANA-Video achieves competitive performance compared to modern state-of-the-art small diffusion models (e.g., Wan 2.1-1.3B and SkyReel-V2-1.3B) while being 16x faster in measured latency. Moreover, SANA-Video can be deployed on RTX 5090 GPUs with NVFP4 precision, accelerating the inference speed of generating a 5-second 720p video from 71s to 29s (2.4x speedup). In summary, SANA-Video enables low-cost, high-quality video generation.

Dingdong Wang, Jin Xu, Ruihang Chu et al.

Recent advancements in speech large language models (SpeechLLMs) have attracted considerable attention. Nonetheless, current methods exhibit suboptimal performance in adhering to speech instructions. Notably, the intelligence of models significantly diminishes when processing speech-form input as compared to direct text-form input. Prior work has attempted to mitigate this semantic inconsistency between speech and text representations through techniques such as representation and behavior alignment, which involve the meticulous design of data pairs during the post-training phase. In this paper, we introduce a simple and scalable training method called InSerter, which stands for Interleaved Speech-Text Representation Pre-training. InSerter is designed to pre-train large-scale unsupervised speech-text sequences, where the speech is synthesized from randomly selected segments of an extensive text corpus using text-to-speech conversion. Consequently, the model acquires the ability to generate textual continuations corresponding to the provided speech segments, obviating the need for intensive data design endeavors. To systematically evaluate speech instruction-following capabilities, we introduce SpeechInstructBench, the first comprehensive benchmark specifically designed for speech-oriented instruction-following tasks. Our proposed InSerter achieves SOTA performance in SpeechInstructBench and demonstrates superior or competitive results across diverse speech processing tasks.

Shuai Yang, Wei Huang, Ruihang Chu et al.

We present LongLive, a frame-level autoregressive (AR) framework for real-time and interactive long video generation. Long video generation presents challenges in both efficiency and quality. Diffusion and Diffusion-Forcing models can produce high-quality videos but suffer from low efficiency due to bidirectional attention. Causal attention AR models support KV caching for faster inference, but often degrade in quality on long videos due to memory challenges during long-video training. In addition, beyond static prompt-based generation, interactive capabilities, such as streaming prompt inputs, are critical for dynamic content creation, enabling users to guide narratives in real time. This interactive requirement significantly increases complexity, especially in ensuring visual consistency and semantic coherence during prompt transitions. To address these challenges, LongLive adopts a causal, frame-level AR design that integrates a KV-recache mechanism that refreshes cached states with new prompts for smooth, adherent switches; streaming long tuning to enable long video training and to align training and inference (train-long-test-long); and short window attention paired with a frame-level attention sink, shorten as frame sink, preserving long-range consistency while enabling faster generation. With these key designs, LongLive fine-tunes a 1.3B-parameter short-clip model to minute-long generation in just 32 GPU-days. At inference, LongLive sustains 20.7 FPS on a single NVIDIA H100, achieves strong performance on VBench in both short and long videos. LongLive supports up to 240-second videos on a single H100 GPU. LongLive further supports INT8-quantized inference with only marginal quality loss.

Longxiang Tang, Ruihang Chu, Xiang Wang et al.

Advanced discrete token-based autoregressive image generation systems first tokenize images into sequences of token indices with a codebook, and then model these sequences in an autoregressive paradigm. While autoregressive generative models are trained only on index values, the prior encoded in the codebook, which contains rich token similarity information, is not exploited. Recent studies have attempted to incorporate this prior by performing naive k-means clustering on the tokens, helping to facilitate the training of generative models with a reduced codebook. However, we reveal that k-means clustering performs poorly in the codebook feature space due to inherent issues, including token space disparity and centroid distance inaccuracy. In this work, we propose the Discriminative Codebook Prior Extractor (DCPE) as an alternative to k-means clustering for more effectively mining and utilizing the token similarity information embedded in the codebook. DCPE replaces the commonly used centroid-based distance, which is found to be unsuitable and inaccurate for the token feature space, with a more reasonable instance-based distance. Using an agglomerative merging technique, it further addresses the token space disparity issue by avoiding splitting high-density regions and aggregating low-density ones. Extensive experiments demonstrate that DCPE is plug-and-play and integrates seamlessly with existing codebook prior-based paradigms. With the discriminative prior extracted, DCPE accelerates the training of autoregressive models by 42% on LlamaGen-B and improves final FID and IS performance.

Yiming Ren, Zhiqiang Lin, Yu Li et al.

Controllable captioning is essential for precise multimodal alignment and instruction following, yet existing models often lack fine-grained control and reliable evaluation protocols. To address this gap, we present the AnyCap Project, an integrated solution spanning model, dataset, and evaluation. We introduce AnyCapModel (ACM), a lightweight plug-and-play framework that enhances the controllability of existing foundation models for omni-modal captioning without retraining the base model. ACM reuses the original captions from base models while incorporating user instructions and modality features to generate improved captions. To remedy the data scarcity in controllable multimodal captioning, we build AnyCapDataset (ACD), covering three modalities, 28 user-instruction types, and 300\,k high-quality data entries. We further propose AnyCapEval, a new benchmark that provides more reliable evaluation metrics for controllable captioning by decoupling content accuracy and stylistic fidelity. ACM markedly improves caption quality across a diverse set of base models on AnyCapEval. Notably, ACM-8B raises GPT-4oś content scores by 45\% and style scores by 12\%, and it also achieves substantial gains on widely used benchmarks such as MIA-Bench and VidCapBench.

Bin Xia, Jiyang Liu, Yuechen Zhang et al.

Instruction-based editing holds vast potential due to its simple and efficient interactive editing format. However, instruction-based editing, particularly for video, has been constrained by limited training data, hindering its practical application. To this end, we introduce DreamVE, a unified model for instruction-based image and video editing. Specifically, We propose a two-stage training strategy: first image editing, then video editing. This offers two main benefits: (1) Image data scales more easily, and models are more efficient to train, providing useful priors for faster and better video editing training. (2) Unifying image and video generation is natural and aligns with current trends. Moreover, we present comprehensive training data synthesis pipelines, including collage-based and generative model-based data synthesis. The collage-based data synthesis combines foreground objects and backgrounds to generate diverse editing data, such as object manipulation, background changes, and text modifications. It can easily generate billions of accurate, consistent, realistic, and diverse editing pairs. We pretrain DreamVE on extensive collage-based data to achieve strong performance in key editing types and enhance generalization and transfer capabilities. However, collage-based data lacks some attribute editing cases, leading to a relative drop in performance. In contrast, the generative model-based pipeline, despite being hard to scale up, offers flexibility in handling attribute editing cases. Therefore, we use generative model-based data to further fine-tune DreamVE. Besides, we design an efficient and powerful editing framework for DreamVE. We build on the SOTA T2V model and use a token concatenation with early drop approach to inject source image guidance, ensuring strong consistency and editability. The codes and models will be released.

Xiaogang Xu, Jian Wang, Yunfan Lu et al.

Diffusion-based methods, leveraging pre-trained large models like Stable Diffusion via ControlNet, have achieved remarkable performance in several low-level vision tasks. However, Pre-Trained Diffusion-Based (PTDB) methods often sacrifice content fidelity to attain higher perceptual realism. This issue is exacerbated in low-light scenarios, where severely degraded information caused by the darkness limits effective control. We identify two primary causes of fidelity loss: the absence of suitable conditional latent modeling and the lack of bidirectional interaction between the conditional latent and noisy latent in the diffusion process. To address this, we propose a novel optimization strategy for conditioning in pre-trained diffusion models, enhancing fidelity while preserving realism and aesthetics. Our method introduces a mechanism to recover spatial details lost during VAE encoding, i.e., a latent refinement pipeline incorporating generative priors. Additionally, the refined latent condition interacts dynamically with the noisy latent, leading to improved restoration performance. Our approach is plug-and-play, seamlessly integrating into existing diffusion networks to provide more effective control. Extensive experiments demonstrate significant fidelity improvements in PTDB methods.

Xinchen Zhang, Xiaoying Zhang, Youbin Wu et al.

We introduce Generative Universal Verifier, a novel concept and plugin designed for next-generation multimodal reasoning in vision-language models and unified multimodal models, providing the fundamental capability of reflection and refinement on visual outcomes during the reasoning and generation process. This work makes three main contributions: (1) We build ViVerBench, a comprehensive benchmark spanning 16 categories of critical tasks for evaluating visual outcomes in multimodal reasoning. Results show that existing VLMs consistently underperform across these tasks, underscoring a substantial gap from human-level capability in reliable visual verification. (2) We design two automated pipelines to construct large-scale visual verification data and train OmniVerifier-7B, the first omni-capable generative verifier trained for universal visual verification and achieves notable gains on ViVerBench(+8.3). Through training, we identify three atomic capabilities in visual verification and demonstrate how they generalize and interact synergistically. (3) We propose OmniVerifier-TTS, a sequential test-time scaling paradigm that leverages the universal verifier to bridge image generation and editing within unified models, enhancing the upper bound of generative ability through iterative fine-grained optimization. Beyond generation, we extend universal verifier to broader world-modeling interleaved reasoning scenarios. Empirically, OmniVerifier-TTS achieves improvements on T2I-ReasonBench(+3.7), and GenEval++(+4.3), outperforming existing parallel test-time scaling methods, such as Best-of-N. By endowing multimodal reasoning with reliable visual verification, OmniVerifier advances both reliable reflection during generation and scalable test-time refinement, marking a step toward more trustworthy and controllable next-generation reasoning systems.

Yu Li, Menghan Xia, Gongye Liu et al.

Recent Text-to-Video (T2V) models have demonstrated powerful capability in visual simulation of real-world geometry and physical laws, indicating its potential as implicit world models. Inspired by this, we explore the feasibility of leveraging the video generation prior for viewpoint planning from given 4D scenes, since videos internally accompany dynamic scenes with natural viewpoints. To this end, we propose a two-stage paradigm to adapt pre-trained T2V models for viewpoint prediction, in a compatible manner. First, we inject the 4D scene representation into the pre-trained T2V model via an adaptive learning branch, where the 4D scene is viewpoint-agnostic and the conditional generated video embeds the viewpoints visually. Then, we formulate viewpoint extraction as a hybrid-condition guided camera extrinsic denoising process. Specifically, a camera extrinsic diffusion branch is further introduced onto the pre-trained T2V model, by taking the generated video and 4D scene as input. Experimental results show the superiority of our proposed method over existing competitors, and ablation studies validate the effectiveness of our key technical designs. To some extent, this work proves the potential of video generation models toward 4D interaction in real world.

Yuanfeng Ji, Dan Lin, Xiyue Wang et al.

The scarcity of well-annotated diverse medical images is a major hurdle for developing reliable AI models in healthcare. Substantial technical advances have been made in generative foundation models for natural images. Here we develop `ChexGen', a generative vision-language foundation model that introduces a unified framework for text-, mask-, and bounding box-guided synthesis of chest radiographs. Built upon the latent diffusion transformer architecture, ChexGen was pretrained on the largest curated chest X-ray dataset to date, consisting of 960,000 radiograph-report pairs. ChexGen achieves accurate synthesis of radiographs through expert evaluations and quantitative metrics. We demonstrate the utility of ChexGen for training data augmentation and supervised pretraining, which led to performance improvements across disease classification, detection, and segmentation tasks using a small fraction of training data. Further, our model enables the creation of diverse patient cohorts that enhance model fairness by detecting and mitigating demographic biases. Our study supports the transformative role of generative foundation models in building more accurate, data-efficient, and equitable medical AI systems.

Yuqing Chen, Junjie Wang, Lin Liu et al.

Diffusion models have recently advanced video editing, yet controllable editing remains challenging due to the need for precise manipulation of diverse object properties. Current methods require different control signal for diverse editing tasks, which complicates model design and demands significant training resources. To address this, we propose O-DisCo-Edit, a unified framework that incorporates a novel object distortion control (O-DisCo). This signal, based on random and adaptive noise, flexibly encapsulates a wide range of editing cues within a single representation. Paired with a "copy-form" preservation module for preserving non-edited regions, O-DisCo-Edit enables efficient, high-fidelity editing through an effective training paradigm. Extensive experiments and comprehensive human evaluations consistently demonstrate that O-DisCo-Edit surpasses both specialized and multitask state-of-the-art methods across various video editing tasks. https://cyqii.github.io/O-DisCo-Edit.github.io/

Yuxuan Lin, Ruihang Chu, Zhenyu Chen et al.

Generative 3D reconstruction shows strong potential in incomplete observations. While sparse-view and single-image reconstruction are well-researched, partial observation remains underexplored. In this context, dense views are accessible only from a specific angular range, with other perspectives remaining inaccessible. This task presents two main challenges: (i) limited View Range: observations confined to a narrow angular scope prevent effective traditional interpolation techniques that require evenly distributed perspectives. (ii) inconsistent Generation: views created for invisible regions often lack coherence with both visible regions and each other, compromising reconstruction consistency. To address these challenges, we propose \method, a novel training-free approach that integrates the local dense observations and multi-source priors for reconstruction. Our method introduces a fusion-based strategy to effectively align these priors in DDIM sampling, thereby generating multi-view consistent images to supervise invisible views. We further design an iterative refinement strategy, which uses the geometric structures of the object to enhance reconstruction quality. Extensive experiments on multiple datasets show the superiority of our method over SOTAs, especially in invisible regions.

Ruihang Chu, Yukang Chen, Tao Kong et al.

Separating 3D point clouds into individual instances is an important task for 3D vision. It is challenging due to the unknown and varying number of instances in a scene. Existing deep learning based works focus on a two-step pipeline: first learn a feature embedding and then cluster the points. Such a two-step pipeline leads to disconnected intermediate objectives. In this paper, we propose an integrated reformulation of 3D instance segmentation as a per-point classification problem. We propose ICM-3D, a single-step method to segment 3D instances via instantiated categorization. The augmented category information is automatically constructed from 3D spatial positions. We conduct extensive experiments to verify the effectiveness of ICM-3D and show that it obtains inspiring performance across multiple frameworks, backbones and benchmarks.

Yiming Li, Tao Kong, Ruihang Chu et al.

Grasping in cluttered scenes has always been a great challenge for robots, due to the requirement of the ability to well understand the scene and object information. Previous works usually assume that the geometry information of the objects is available, or utilize a step-wise, multi-stage strategy to predict the feasible 6-DoF grasp poses. In this work, we propose to formalize the 6-DoF grasp pose estimation as a simultaneous multi-task learning problem. In a unified framework, we jointly predict the feasible 6-DoF grasp poses, instance semantic segmentation, and collision information. The whole framework is jointly optimized and end-to-end differentiable. Our model is evaluated on large-scale benchmarks as well as the real robot system. On the public dataset, our method outperforms prior state-of-the-art methods by a large margin (+4.08 AP). We also demonstrate the implementation of our model on a real robotic platform and show that the robot can accurately grasp target objects in cluttered scenarios with a high success rate. Project link: https://openbyterobotics.github.io/sscl

Ruihang Chu, Yifan Sun, Yadong Li et al.

This paper considers vehicle re-identification (re-ID) problem. The extreme viewpoint variation (up to 180 degrees) poses great challenges for existing approaches. Inspired by the behavior in human's recognition process, we propose a novel viewpoint-aware metric learning approach. It learns two metrics for similar viewpoints and different viewpoints in two feature spaces, respectively, giving rise to viewpoint-aware network (VANet). During training, two types of constraints are applied jointly. During inference, viewpoint is firstly estimated and the corresponding metric is used. Experimental results confirm that VANet significantly improves re-ID accuracy, especially when the pair is observed from different viewpoints. Our method establishes the new state-of-the-art on two benchmarks.