ROFeb 28, 2017
Robust Bipedal Locomotion Control Based on Model Predictive Control and Divergent Component of MotionMilad Shafiee-Ashtiani, Aghil Yousefi-Koma, Masoud Shariat-Panahi
In this paper, previous works on the Model Predictive Control (MPC) and the Divergent Component of Motion (DCM) for bipedal walking control are extended. To this end, we employ a single MPC which uses a combination of Center of Pressure (CoP) manipulation, step adjustment, and Centroidal Moment Pivot (CMP) modulation to design a robust walking controller. Furthermore, we exploit the concept of time-varying DCM to generalize our walking controller for walking in uneven surfaces. Using our scheme, a general and robust walking controller is designed which can be implemented on robots with different control authorities, for walking on various environments, e.g. uneven terrains or surfaces with a very limited feasible area for stepping. The effectiveness of the proposed approach is verified through simulations on different scenarios and comparison to the state of the art.
RODec 23, 2016
Push Recovery of a Humanoid Robot Based on Model Predictive Control and Capture PointMilad Shafiee-Ashtiani, Aghil Yousefi-Koma, Masoud Shariat-Panahi et al.
The three bio-inspired strategies that have been used for balance recovery of biped robots are the ankle, hip and stepping Strategies. However, there are several cases for a biped robot where stepping is not possible, e. g. when the available contact surfaces are limited. In this situation, the balance recovery by modulating the angular momentum of the upper body (Hip-strategy) or the Zero Moment Point (ZMP) (Ankle strategy) is essential. In this paper, a single Model Predictive Control (MPC) scheme is employed for controlling the Capture Point (CP) to a desired position by modulating both the ZMP and the Centroidal Moment Pivot (CMP). The goal of the proposed controller is to control the CP, employing the CMP when the CP is out of the support polygon, and/or the ZMP when the CP is inside the support polygon. The proposed algorithm is implemented on an abstract model of the SURENA III humanoid robot. Obtained results show the effectiveness of the proposed approach in the presence of severe pushes, even when the support polygon is shrunken to a point or a line.