Xiaodan Shao

Beixiong Zheng, Qingjie Wu, Xue Xiong et al.

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) has emerged as a promising technology for enhancing wireless communication and sensing performance through flexible antenna orientation/boresight rotation. By enabling mechanical or electronic boresight adjustment without altering physical antenna positions, RA introduces additional spatial degrees of freedom (DoFs) beyond conventional beamforming. In this paper, we provide a comprehensive tutorial on the fundamentals, architectures, and applications of RA-empowered wireless networks. Specifically, we begin by reviewing the historical evolution of RA-related technologies and clarifying the distinctive role of RA among flexible antenna architectures. Then, we establish a unified mathematical framework for RA-enabled systems, including general antenna/array rotation models, as well as channel models that cover near- and far-field propagation characteristics, wideband frequency selectivity, and polarization effects. Building upon this foundation, we investigate antenna/array rotation optimization in representative communication and sensing scenarios. Furthermore, we examine RA channel estimation/acquisition strategies encompassing orientation scheduling mechanisms and signal processing methods that exploit multi-view channel observations. Beyond theoretical modeling and algorithmic design, we discuss practical RA configurations and deployment strategies. We also present recent RA prototypes and experimental results that validate the practical performance gains enabled by antenna rotation. Finally, we highlight promising extensions of RA to emerging wireless paradigms and outline open challenges to inspire future research.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

In this paper, we propose a distributed flexible coupler antenna (FCA) array to enhance communication performance with low hardware cost. At each FCA, there is one fixed-position active antenna and multiple passive couplers that can move within a designated region around the active antenna. Moreover, each FCA is equipped with a local processing unit (LPU). All LPUs exchange signals with a central processing unit (CPU) for joint signal processing. We study an FCA-aided multiuser multiple-input multiple-output (MIMO) system, where an FCA array base station (BS) is deployed to enhance the downlink communication between the BS and multiple single-antenna users. We formulate optimization problems to maximize the achievable sum rate of users by jointly optimizing the coupler positions and digital beamforming, subject to movement constraints on the coupler positions and the transmit power constraint. To address the resulting nonconvex optimization problem, the digital beamforming is expressed as a function of the FCA position vectors, which are then optimized using the proposed distributed coupler position optimization algorithm. Considering a structured time domain pattern of pilots and coupler positions, pilot-assisted centralized and distributed channel estimation algorithms are designed under the FCA array architecture. Simulation results demonstrate that the distributed FCA array achieves substantial rate gains over conventional benchmarks in multiuser systems without moving active antennas, and approaches the performance of fully active arrays while significantly reducing hardware cost and power consumption. Moreover, the proposed channel estimation algorithms outperform the benchmark schemes in terms of both pilot overhead and channel reconstruction accuracy.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

Flexible coupler antenna systems have recently received significant research interest due to their capability to intelligently reconfigure wireless channels by controlling coupler positions and/or rotations and dynamically exploiting mutual coupling. In this paper, we investigate a new type of flexible coupler antenna, termed rotatable coupler antenna (RCA), for enabling spectrum and energy efficient wireless communication cost-effectively. Specifically, an RCA consists of one fixed active antenna and multiple low-cost passive couplers, each of which can independently rotate in three-dimensional (3D) space, so as to collaboratively achieve mechanical beamforming without requiring additional radio-frequency (RF) chains for the couplers. We study an RCA-enhanced point-to-point communication system, where one RCA is deployed at the transmitter to serve a single user equipped with a fixed antenna. Based on multi-port circuit theory, we establish the channel model and characterize the mutual coupling coefficients as a function of coupler rotations. We formulate a new problem to maximize the received signal-to-noise ratio (SNR) at the user by optimizing the 3D rotations of all couplers, subject to practical coupler rotation constraints. To tackle this nonconvex problem, we develop a spherical-cap conditional-gradient-based algorithm with cross-entropy-method initialization. Simulation results demonstrate that the proposed RCA system can significantly improve communication performance in comparison with benchmark schemes, while requiring substantially fewer active antennas and RF chains.

Xiaodan Shao, Chuangye Shan, Weihua Zhuang et al.

Flexible coupler antenna (FCA) is a new technique that aims to improve the performance of wireless communication networks by smartly translating low-cost passive couplers around fixed-position active antennas to reshape the induced currents on the passive elements for radiation. Specifically, different couplers can independently control their positions/rotations at the transceiver and thereby collaboratively achieve mechanical beamforming for directional signal enhancement or nulling. The position and/or rotation reconfiguration of passive couplers provides a new and cost-effective means of enhancing wireless communication performance, while significantly reducing the antenna and radio-frequency (RF) chain costs of conventional active arrays. The compact and low form-factor structure of the FCA makes it particularly appealing for devices with stringent size, weight, and power (SWAP) constraints. In this article, we provide an overview of FCA to reveal its promising capabilities in wireless networks, including its system modeling, practical implementation, and competitive advantages over existing techniques. We present a variety of FCA-enabled performance enhancements in terms of mechanical beamforming gain, path-loss reduction, fading mitigation, spatial multiplexing gain, interference suppression, and geometric gain. Furthermore, we elaborate on the design challenges of FCA as well as promising solutions, and discuss the key applications of FCA in wireless networks. Finally, numerical results are presented to verify the substantial capacity gains enabled by FCA-aided transmission in wireless networks.

Qijun Jiang, Xiaodan Shao, Rui Zhang

In this paper, we investigate a multi-cell six-dimensional movable antenna (6DMA) network for enhancing downlink communication performance under inter-cell interference (ICI). Each base station (BS) is equipped with multiple 6DMA surfaces, and the 6DMA rotations affect both the desired-signal enhancement for in-cell users and the interference leakage toward neighboring cells, which makes the antenna-rotation design and transmit precoding intrinsically coupled across BSs. To address this issue, we formulate an average weighted sum-rate maximization problem for the multi-cell system by jointly optimizing the short-term downlink precoders and long-term 6DMA rotations under practical antenna geometric constraints. To tackle the resulting nonconvex problem, we propose a distributed two-timescale design based on inter-cell interference power constraint (IPC) coordination among neighboring BSs, under which each BS performs local short-term precoder optimization based on instantaneous channel state information (CSI) and long-term 6DMA rotation update according to statistical CSI with limited inter-BS information exchange. In particular, an edge-wise IPC coordination mechanism based on two-stage one-dimensional grid search and random maximal matching is developed to enable scalable distributed implementation. A centralized offline benchmark is also provided for performance comparison. Numerical results show that the proposed distributed design achieves performance close to the centralized benchmark under different interference conditions, while maintaining favorable scalability as the network size increases.

Zhiyuan Zhai, Wenjing Yan, Xiaodan Shao et al.

Does reinforcement learning genuinely expand what LLM agents can do, or merely make them more reliable? For static reasoning, recent work answers the second: base and RL pass@k curves converge at large k. We ask whether this holds for agentic tool use, where T rounds of interaction enable compositional strategies that re-sampling cannot recover. We introduce PASS@(k,T), a two-dimensional metric that jointly varies sampling budget k and interaction depth T, separating capability expansion from efficiency improvement. Our main finding is that, contrary to the static-reasoning result, tool-use RL genuinely enlarges the capability boundary: the RL agent's pass-curve pulls above the base model's and the gap widens at large k rather than converging. The expansion is specific to compositional, sequential information gathering; on simpler tasks RL behaves as prior work predicts. Under matched training data, supervised fine-tuning regresses the boundary on the same compositional tasks, isolating self-directed exploration as the causal factor. Mechanism analysis shows RL reweights the base strategy distribution toward the subset whose downstream reasoning more often yields a correct answer, with the improvement concentrated on how the agent integrates retrieved information. These results reconcile optimistic and pessimistic readings of RL for LLMs: both are correct, on different task types.

Wenyan Ma, Lipeng Zhu, Xiaodan Shao et al.

This paper presents a novel wireless sensing system where a movable antenna (MA) continuously moves and receives sensing signals within a three-dimensional (3-D) region to enhance sensing performance compared with conventional fixed-position antenna (FPA)-based sensing. We show that the performance of direction vector estimation for a target is fundamentally related to the 3-D MA trajectory in terms of the mean square angular error lower-bound (MSAEB), which is adopted as a coordinate-invariant performance metric. In particular, the closed-form expression of the MSAEB is derived as a function of the trajectory covariance matrix. Theoretical analysis shows that two-dimensional (2-D) antenna movement suffers from performance divergence for target direction close to the endfire direction of the 2-D MA plane, whereas 3-D movement can achieve isotropic sensing performance over the entire angular region. To achieve robust sensing performance, we formulate a min-max optimization problem to minimize the maximum (worst-case) MSAEB over a given continuous angular region wherein the target is located. An efficient successive convex approximation (SCA) algorithm is developed to optimize the 3-D MA trajectory and obtain a locally optimal solution. Numerical results demonstrate that the proposed 3-D MA sensing scheme is able to significantly reduce the worst-case mean square angular error (MSAE) compared with conventional arrays with FPAs and MA systems with 2-D movement only, thus achieving more accurate and robust direction estimation over the entire angular region.