Zheyu Wu

Zheyu Wu, Matteo Nerini, Bruno Clerckx

This paper studies multi-operator wireless communication systems aided by general reconfigurable intelligent surface (RIS), including both conventional single-connected RIS and beyond-diagonal RIS (BD-RIS). Specifically, we consider a system where multiple operators coexist in the same area over different frequency bands, each with a single-antenna base station, while one operator serves its single-antenna user with the aid of an RIS. In such a system, the RIS may unintentionally reflect signals from the non-serving operators, leading to inter-operator interference and rapid fluctuations of their effective channels. To address this issue, we propose a practical RIS design framework that maximizes the received signal power of the serving operator while enforcing fixed RIS-reflected channels of the non-serving operators. We derive closed-form solutions to the resulting optimization problem, based on a novel technique to deal with the coupled unitary and linear equality constraints. We further give scaling law analysis of the received signal power. For a two-operator system, the received signal power scales quadratically with the number of RIS elements for group-connected BD-RIS with group size Gs>=2, whereas for conventional single-connected RIS it scales only linearly. More generally, for an L-operator system with L-1 non-serving operators, the scaling-law transition occurs at Gs=L, where quadratic scaling is achieved when Gs>=L, and linear scaling otherwise. These results demonstrate that, in a multi-operator system, quadratic scaling is achievable only with BD-RIS architectures having enough interconnections. Simulation results validate the analysis and show the significant gain of BD-RIS over conventional RIS in multi-operator systems. In particular, group-connected BD-RIS with Gs=2 achieves a 13dB gain over conventional RIS in a two-operator system with a 128-element RIS.

Matteo Nerini, Zheyu Wu, Shanpu Shen et al.

Reconfigurable intelligent surfaces (RISs) enable programmable control of the wireless propagation environment and are key enablers for future networks. Beyond-diagonal RIS (BD-RIS) architectures enhance conventional RIS by interconnecting elements through tunable impedance components, offering greater flexibility with higher circuit complexity. However, excessive interconnections between BD-RIS elements require multi-layer printed circuit board (PCB) designs, increasing fabrication difficulty. In this letter, we use graph theory to characterize the BD-RIS architectures that can be realized on double-layer PCBs, denoted as planar-connected RISs. Among the possible planar-connected RISs, we identify the ones with the most degrees of freedom, expected to achieve the best performance under practical constraints.

Zheyu Wu, Matteo Nerini, Bruno Clerckx

Reconfigurable intelligent surface (RIS) is a promising technology for future wireless communication systems. Conventional RIS is constrained to a diagonal scattering matrix, which limits its flexibility. Recently, beyond-diagonal RIS (BD-RIS) has been proposed as a more general RIS architecture class that allows inter-element connections and shows great potential for performance improvement. Despite extensive progress on BD-RIS, most existing studies rely on simplified channel models that ignore practical electromagnetic (EM) effects such as mutual coupling and impedance mismatching. To address this gap, this paper investigates the architecture design and optimization of BD-RIS under the general physics-consistent model derived with multiport network theory in recent literature. Building on a compact reformulation of this model, we show that band-connected RIS achieves the same channel-shaping capability as fully-connected RIS, which extends existing results obtained for conventional channel models. We then develop optimization methods under the general physics-consistent model; specifically, we derive closed-form solutions for single-input single-output (SISO) systems, propose a globally optimal semidefinite relaxation (SDR)-based algorithm for single-stream multi-input multi-output (MIMO) systems, and design an efficient alternating direction method of multipliers (ADMM)-based algorithm for multiuser MIMO systems. Using the proposed algorithms, we conduct comprehensive simulations to evaluate the impact of various EM effects and approximations. The results indicate that the commonly adopted unilateral approximation provides sufficient accuracy in RIS-aided systems and can therefore be readily adopted to simplify the channel model, whereas mutual coupling among RIS elements should be properly taken into account in channel modeling.

Ziang Liu, Zheyu Wu, Bruno Clerckx

Multiple-input multiple-output (MIMO) radar has waveform diversity and large spatial degrees of freedom (DoFs), making it attractive for high-resolution sensing. Scaling MIMO radar to massive arrays can further improve sensing performance, but it also increases hardware cost, power consumption, and digital processing complexity. The microwave linear analog computer (MiLAC) can tackle these challenges by moving linear operations from the digital domain to the analog domain. MiLAC has shown promising benefits for communications in recent studies and this paper identifies its potential for radar sensing. Specifically, we consider both MiLAC-aided transmit beamforming and receiver-side two-dimensional discrete Fourier transform (2D-DFT)-based direction-of-arrival (DoA) estimation. For transmit beamforming, we formulate a weighted Cramer Rao bound (CRB) minimization problem under lossless and reciprocal MiLAC constraints and propose a penalty dual decomposition (PDD)-based iterative algorithm to address the non-convex problem. We further prove that MiLAC-aided and fully-digital beamforming achieve the same CRB. For receiver processing, we show that the 2D DFT can be implemented by a lossless reciprocal MiLAC, which enables analog-domain DoA estimation without digital optimization. Numerical results confirm the theoretical finding and show that the MiLAC-aided approach achieves the same CRB and DoA estimation performance as the fully-digital benchmark. Meanwhile, hardware cost and power consumption are reduced because only low-resolution DACs are required at the transmitter, while RF chains and ADCs are eliminated at the receiver. Moreover, performing the 2D DFT in the analog domain eliminates all digital DFT operations for DoA estimation.

Zheyu Wu, Junjie Ma, Ya-Feng Liu et al.

Massive multiple-input multiple-output (MIMO) systems employing one-bit digital-to-analog converters offer a hardware-efficient solution for wireless communications. However, the one-bit constraint poses significant challenges for precoding design, as it transforms the problem into a discrete and nonconvex optimization task. In this paper, we investigate a widely adopted ``convex-relaxation-then-quantization" approach for nonlinear symbol-level one-bit precoding. Specifically, we first solve a convex relaxation of the discrete minimum mean square error precoding problem, and then quantize the solution to satisfy the one-bit constraint. Focusing on a real-valued system with an independently and identically distributed (i.i.d.) Gaussian channel, we develop a novel analytical framework based on approximate message passing (AMP) to characterize the high-dimensional asymptotic performance of the considered scheme. The key technical ingredient is an auxiliary AMP iteration that dedicatedly incorporates the nonlinear quantization function into the state evolution analysis. With the proposed framework, we derive a closed-form expression for the symbol error probability (SEP) at the receiver side in the large-system limit, which provides a quantitative characterization of how model and system parameters affect the SEP performance. Our empirical results suggest that the $\ell_\infty^2$ regularizer, when paired with an optimally chosen regularization parameter, achieves optimal SEP performance within a broad class of convex regularization functions. As a first step towards a theoretical justification, we prove the optimality of the $\ell_\infty^2$ regularizer within the mixed $\ell_\infty^2$-$\ell_2^2$ regularization functions.

Yiyang Peng, Zheyu Wu, Bruno Clerckx

Microwave linear analog computing (MiLAC) has recently emerged as a promising architecture for analog-domain beamforming. In particular, a hybrid digital-MiLAC architecture was proposed and was shown to achieve fully-digital beamforming flexibility in narrowband systems when the number of RF chains equals the number of data streams. However, its performance in wideband systems remains unexplored. This paper presents the first study of hybrid digital-MiLAC beamforming for wideband multi-user multiple-input single-output (MU-MISO) systems. We first characterize the minimum number of radio-frequency (RF) chains required for hybrid digital-MiLAC beamforming to realize an arbitrary set of fully-digital beamforming matrices across all subcarriers. It turns out that, unlike in the narrowband case, a larger number of RF chains is generally required in frequency-selective channels to achieve fully-digital beamforming flexibility, which may be unfavorable in practice. To study the performance of hybrid digital-MiLAC beamforming with a limited number of RF chains, we then formulate the average sum-rate maximization problem and develop an efficient weighted minimum mean-square error (WMMSE)-based algorithm for beamforming design. Simulation results show that hybrid digital-MiLAC beamforming consistently outperforms conventional hybrid digital-analog beamforming, and achieves $89.93\%$ of the fully-digital sum-rate while using only $12.5\%$ of the RF chains in highly frequency-selective channels.