Dasharadhan Mahalingam

Dasharadhan Mahalingam, Michael Gallagher, Nilanjan Chakraborty et al.

We present a screw geometry-based manipulation planning framework for the robotic automation of solution-based synthesis, exemplified through the preparation of gold and magnetite nanoparticles. The synthesis protocols are inherently long-horizon, multi-step tasks, requiring skills such as pick-and-place, pouring, turning a knob, and periodic visual inspection to detect reaction completion. A central challenge is that some skills, notably pouring, transferring containers with solutions, and turning a knob, impose geometric and kinematic constraints on the end-effector motion. To address this, we use a programming by demonstration paradigm where the constraints can be extracted from a single demonstration. This combination of screw-based motion representation and demonstration-driven specification enables domain experts, such as chemists, to readily adapt and reprogram the system for new experimental protocols and laboratory setups without requiring expertise in robotics or motion planning. We extract sequences of constant screws from demonstrations, which compactly encode the motion constraints while remaining coordinate-invariant. This representation enables robust generalization across variations in grasp placement and allows parameterized reuse of a skill learned from a single example. By composing these screw-parameterized primitives according to the synthesis protocol, the robot autonomously generates motion plans that execute the complete experiment over repeated runs. Our results highlight that screw-theoretic planning, combined with programming by demonstration, provides a rigorous and generalizable foundation for long-horizon laboratory automation, thereby enabling fundamental kinematics to have a translational impact on the use of robots in developing scalable solution-based synthesis protocols.

Wangyi Liu, Dasharadhan Mahalingam, Fanru Gao et al.

In this paper, we study the problem of manipulation skill acquisition for performing construction activities consisting of repetitive tasks (e.g., building a wall or installing ceiling tiles). Our approach involves setting up a simulated construction activity in a Virtual Reality (VR) environment, where the user can provide demonstrations of the object manipulation skills needed to perform the construction activity. We then exploit the screw geometry of motion to approximate the demonstrated motion as a sequence of constant screw motions. For performing the construction activity, we generate the sequence of manipulation task instances and then compute the joint space motion plan corresponding to each instance using Screw Linear Interpolation (ScLERP) and Resolved Motion Rate Control (RMRC). We evaluate our framework by executing two representative construction tasks: constructing brick walls and installing multiple ceiling tiles. Each task is performed using only a single demonstration, a pick-and-place action for the bricks, and a single ceiling tile installation. Our experiments with a 7-DoF robot in both simulation and hardware demonstrate that the approach generalizes robustly to arbitrarily long construction activities that involve repetitive motions and demand precision, even when provided with just one demonstration. For instance, we can construct walls of arbitrary layout and length by leveraging a single demonstration of placing one brick on top of another.