SYNov 11, 2017Code
TDNetGen: An open-source, parametrizable, large-scale, transmission and distribution test systemNicolas Pilatte, Petros Aristidou, Gabriela Hug
In this paper, an open-source MATLAB toolbox is presented that is able to generate synthetic, combined transmission and distribution network models. These can be used to analyse the interactions between transmission and multiple distribution systems, such as the provision of ancillary services by active distribution grids, the co-optimization of planning and operation, the development of emergency control and protection schemes spanning over different voltage levels, the analysis of combined market aspects, etc. The generated test-system models are highly customizable, providing the user with the flexibility to easily choose the desired characteristics, such as the level of renewable energy penetration, the size of the final system, etc.
10.6SYApr 14
Enhanced Optimal Power Flow Using a Trained Neural Network Surrogate for Distribution Grid ConstraintsSavvas Panagi, Chrysovalantis Spanias, Petros Aristidou
The growing penetration of distributed energy resources (DERs), electric vehicles (EVs), and heat pumps (HPs) in distribution networks underscores the need for secure, computationally efficient optimal power flow (OPF) solutions. Traditional OPF formulations often suffer from scalability limitations and may rely on relaxations/approximations whose exactness is not guaranteed. This paper proposes a framework in which a trained neural network (NN) surrogate is embedded directly within the OPF as a constraint replacement. Specifically, the nonlinear power-flow-to-voltage mapping is replaced by an exact mixed-integer linear encoding of the NN (i.e., the NN input-output map is represented without approximation), while all remaining OPF constraints are preserved. Using a realistic low-voltage network with integrated PV, EVs, and HPs, the proposed method achieves high voltage accuracy during post-solution AC power flow validation, with maximum deviations of less than 1.0 V in the examined test cases. The resulting NN-OPF problems are solved to global optimality within the MILP solver tolerance, and numerical results demonstrate substantially reduced computation time compared to nonlinear OPF models, with performance competitive with SOCP-based DistFlow formulations.
SYApr 4, 2019
Online Estimation of Power System Inertia Using Dynamic Regressor Extension and MixingJohannes Schiffer, Petros Aristidou, Romeo Ortega
The increasing penetration of power-electronic-interfaced devices is expected to have a significant effect on the overall system inertia and a crucial impact on the system dynamics. In the future, the reduction of inertia will have drastic consequences on protection and real-time control and will play a crucial role in the system operation. Therefore, in a highly deregulated and uncertain environment, it is necessary for Transmission System Operators to be able to monitor the system inertia in real time. We address this problem by developing and validating an online inertia estimation algorithm. The estimator is derived using the recently proposed dynamic regressor extension and mixing procedure. The performance of the estimator is demonstrated via several test cases using the 1013-machine ENTSO-E dynamic model.