Shunqing Zhang

Chuan Zhang, Yufeng Yang, Shunqing Zhang et al.

Massive multiple-input multiple-output (M-MIMO) technique brings better energy efficiency and coverage but higher computational complexity than small-scale MIMO. For linear detections such as minimum mean square error (MMSE), prohibitive complexity lies in solving large-scale linear equations. For a better trade-off between bit-error-rate (BER) performance and computational complexity, iterative linear algorithms like conjugate gradient (CG) have been applied and have shown their feasibility in recent years. In this paper, residual-based detection (RBD) algorithms are proposed for M-MIMO detection, including minimal residual (MINRES) algorithm, generalized minimal residual (GMRES) algorithm, and conjugate residual (CR) algorithm. RBD algorithms focus on the minimization of residual norm per iteration, whereas most existing algorithms focus on the approximation of exact signal. Numerical results have shown that, for $64$-QAM $128\times 8$ MIMO, RBD algorithms are only $0.13$ dB away from the exact matrix inversion method when BER$=10^{-4}$. Stability of RBD algorithms has also been verified in various correlation conditions. Complexity comparison has shown that, CR algorithm require $87\%$ less complexity than the traditional method for $128\times 60$ MIMO. The unified hardware architecture is proposed with flexibility, which guarantees a low-complexity implementation for a family of RBD M-MIMO detectors.

Ruihao Yuan, Kaixuan Huang, Pan Yang et al.

Indoor localization is getting increasing demands for various cutting-edged technologies, like Virtual/Augmented reality and smart home. Traditional model-based localization suffers from significant computational overhead, so fingerprint localization is getting increasing attention, which needs lower computation cost after the fingerprint database is built. However, the accuracy of indoor localization is limited by the complicated indoor environment which brings the multipath signal refraction. In this paper, we provided a scheme to improve the accuracy of indoor fingerprint localization from the frequency domain by predicting the channel state information (CSI) values from another transmitting channel and spliced the multi-band information together to get more precise localization results. We tested our proposed scheme on COST 2100 simulation data and real time orthogonal frequency division multiplexing (OFDM) WiFi data collected from an office scenario.

Yanliang Jin, Yifan Wu, Yuan Gao et al.

The emergence of 6th generation (6G) mobile networks brings new challenges in supporting high-mobility communications, particularly in addressing the issue of channel aging. While existing channel prediction methods offer improved accuracy at the expense of increased computational complexity, limiting their practical application in mobile networks. To address these challenges, we present LinFormer, an innovative channel prediction framework based on a scalable, all-linear, encoder-only Transformer model. Our approach, inspired by natural language processing (NLP) models such as BERT, adapts an encoder-only architecture specifically for channel prediction tasks. We propose replacing the computationally intensive attention mechanism commonly used in Transformers with a time-aware multi-layer perceptron (TMLP), significantly reducing computational demands. The inherent time awareness of TMLP module makes it particularly suitable for channel prediction tasks. We enhance LinFormer's training process by employing a weighted mean squared error loss (WMSELoss) function and data augmentation techniques, leveraging larger, readily available communication datasets. Our approach achieves a substantial reduction in computational complexity while maintaining high prediction accuracy, making it more suitable for deployment in cost-effective base stations (BS). Comprehensive experiments using both simulated and measured data demonstrate that LinFormer outperforms existing methods across various mobility scenarios, offering a promising solution for future wireless communication systems.

Guangjin Pan, Kaixuan Huang, Hui Chen et al.

Accurate and robust localization is a critical enabler for emerging 5G and 6G applications, including autonomous driving, extended reality (XR), and smart manufacturing. While data-driven approaches have shown promise, most existing models require large amounts of labeled data and struggle to generalize across deployment scenarios and wireless configurations. To address these limitations, we propose a foundation-model-based solution tailored for wireless localization. We first analyze how different self-supervised learning (SSL) tasks acquire general-purpose and task-specific semantic features based on information bottleneck (IB) theory. Building on this foundation, we design a pretraining methodology for the proposed Large Wireless Localization Model (LWLM). Specifically, we propose an SSL framework that jointly optimizes three complementary objectives: (i) spatial-frequency masked channel modeling (SF-MCM), (ii) domain-transformation invariance (DTI), and (iii) position-invariant contrastive learning (PICL). These objectives jointly capture the underlying semantics of wireless channel from multiple perspectives. We further design lightweight decoders for key downstream tasks, including time-of-arrival (ToA) estimation, angle-of-arrival (AoA) estimation, single base station (BS) localization, and multiple BS localization. Comprehensive experimental results confirm that LWLM consistently surpasses both model-based and supervised learning baselines across all localization tasks. In particular, LWLM achieves 26.0%--87.5% improvement over transformer models without pretraining, and exhibits strong generalization under label-limited fine-tuning and unseen BS configurations, confirming its potential as a foundation model for wireless localization.

Xiaojing Chen, Haiqi Yu, Wei Ni et al.

The rapid emergence of Large Language Models (LLMs) has catalyzed Agentic artificial intelligence (AI), autonomous systems integrating perception, reasoning, and action into closed-loop pipelines for continuous adaptation. While unlocking transformative applications in mobile edge computing, autonomous systems, and next-generation wireless networks, this paradigm creates fundamental energy challenges through iterative inference and persistent data exchange. Unlike traditional AI where bottlenecks are computational Floating Point Operations (FLOPs), Agentic AI faces compounding computational and communication energy costs. In this survey, we propose an energy accounting framework identifying computational and communication costs across the Perception-Reasoning-Action cycle. We establish a unified taxonomy spanning model simplification, computation control, input and attention optimization, and hardware-aware inference. We explore cross-layer co-design strategies jointly optimizing model parameters, wireless transmissions, and edge resources. Finally, we identify open challenges of federated green learning, carbon-aware agency, 6th generation mobile communication (6G)-native Agentic AI, and self-sustaining systems, providing a roadmap for scalable autonomous intelligence.

Yanzan Sun, Jiacheng Qiu, Guangjin Pan et al.

Extended reality (XR), blending virtual and real worlds, is a key application of future networks. While AI advancements enhance XR capabilities, they also impose significant computational and energy challenges on lightweight XR devices. In this paper, we developed a distributed queue model for multi-task DNN inference, addressing issues of resource competition and queue coupling. In response to the challenges posed by the high energy consumption and limited resources of XR devices, we designed a dual time-scale joint optimization strategy for model partitioning and resource allocation, formulated as a bi-level optimization problem. This strategy aims to minimize the total energy consumption of XR devices while ensuring queue stability and adhering to computational and communication resource constraints. To tackle this problem, we devised a Lyapunov-guided Proximal Policy Optimization algorithm, named LyaPPO. Numerical results demonstrate that the LyaPPO algorithm outperforms the baselines, achieving energy conservation of 24.79% to 46.14% under varying resource capacities. Specifically, the proposed algorithm reduces the energy consumption of XR devices by 24.29% to 56.62% compared to baseline algorithms.

Xiaojing Chen, Zhenyuan Li, Wei Ni et al.

Federated learning (FL) is a viable technique to train a shared machine learning model without sharing data. Hierarchical FL (HFL) system has yet to be studied regrading its multiple levels of energy, computation, communication, and client scheduling, especially when it comes to clients relying on energy harvesting to power their operations. This paper presents a new two-phase deep deterministic policy gradient (DDPG) framework, referred to as ``TP-DDPG'', to balance online the learning delay and model accuracy of an FL process in an energy harvesting-powered HFL system. The key idea is that we divide optimization decisions into two groups, and employ DDPG to learn one group in the first phase, while interpreting the other group as part of the environment to provide rewards for training the DDPG in the second phase. Specifically, the DDPG learns the selection of participating clients, and their CPU configurations and the transmission powers. A new straggler-aware client association and bandwidth allocation (SCABA) algorithm efficiently optimizes the other decisions and evaluates the reward for the DDPG. Experiments demonstrate that with substantially reduced number of learnable parameters, the TP-DDPG can quickly converge to effective polices that can shorten the training time of HFL by 39.4% compared to its benchmarks, when the required test accuracy of HFL is 0.9.

Xiufeng Jiang, Shugong Xu, Shunqing Zhang et al.

Text detection/localization, as an important task in computer vision, has witnessed substantialadvancements in methodology and performance with convolutional neural networks. However, the vastmajority of popular methods use rectangles or quadrangles to describe text regions. These representationshave inherent drawbacks, especially relating to dense adjacent text and loose regional text boundaries,which usually cause difficulty detecting arbitrarily shaped text. In this paper, we propose a novel text regionrepresentation method, with a robust pipeline, which can precisely detect dense adjacent text instances witharbitrary shapes. We consider a text instance to be composed of an adaptive central text region mask anda corresponding expanding ratio between the central text region and the full text region. More specifically,our pipeline generates adaptive central text regions and corresponding expanding ratios with a proposedtraining strategy, followed by a new proposed post-processing algorithm which expands central text regionsto the complete text instance with the corresponding expanding ratios. We demonstrated that our new textregion representation is effective, and that the pipeline can precisely detect closely adjacent text instances ofarbitrary shapes. Experimental results on common datasets demonstrate superior performance o

Zhichao Zhang, Shugong Xu, Shunqing Zhang et al.

Environmental sound classification (ESC) is a challenging problem due to the complexity of sounds. The classification performance is heavily dependent on the effectiveness of representative features extracted from the environmental sounds. However, ESC often suffers from the semantically irrelevant frames and silent frames. In order to deal with this, we employ a frame-level attention model to focus on the semantically relevant frames and salient frames. Specifically, we first propose a convolutional recurrent neural network to learn spectro-temporal features and temporal correlations. Then, we extend our convolutional RNN model with a frame-level attention mechanism to learn discriminative feature representations for ESC. We investigated the classification performance when using different attention scaling function and applying different layers. Experiments were conducted on ESC-50 and ESC-10 datasets. Experimental results demonstrated the effectiveness of the proposed method and our method achieved the state-of-the-art or competitive classification accuracy with lower computational complexity. We also visualized our attention results and observed that the proposed attention mechanism was able to lead the network tofocus on the semantically relevant parts of environmental sounds.

Yan Liu, Zhiyuan Jiang, Shunqing Zhang et al.

Ultra-Reliable and Low-Latency Communications (URLLC) services in vehicular networks on millimeter-wave bands present a significant challenge, considering the necessity of constantly adjusting the beam directions. Conventional methods are mostly based on classical control theory, e.g., Kalman filter and its variations, which mainly deal with stationary scenarios. Therefore, severe application limitations exist, especially with complicated, dynamic Vehicle-to-Everything (V2X) channels. This paper gives a thorough study of this subject, by first modifying the classical approaches, e.g., Extended Kalman Filter (EKF) and Particle Filter (PF), for non-stationary scenarios, and then proposing a Reinforcement Learning (RL)-based approach that can achieve the URLLC requirements in a typical intersection scenario. Simulation results based on a commercial ray-tracing simulator show that enhanced EKF and PF methods achieve packet delay more than $10$ ms, whereas the proposed deep RL-based method can reduce the latency to about $6$ ms, by extracting context information from the training data.

Tianhao Qiao, Shunqing Zhang, Zhichao Zhang et al.

Environmental Sound Classification (ESC) is an important and challenging problem, and feature representation is a critical and even decisive factor in ESC. Feature representation ability directly affects the accuracy of sound classification. Therefore, the ESC performance is heavily dependent on the effectiveness of representative features extracted from the environmental sounds. In this paper, we propose a subspectrogram segmentation based ESC classification framework. In addition, we adopt the proposed Convolutional Recurrent Neural Network (CRNN) and score level fusion to jointly improve the classification accuracy. Extensive truncation schemes are evaluated to find the optimal number and the corresponding band ranges of sub-spectrograms. Based on the numerical experiments, the proposed framework can achieve 81.9% ESC classification accuracy on the public dataset ESC-50, which provides 9.1% accuracy improvement over traditional baseline schemes.

Zhichao Zhang, Shugong Xu, Tianhao Qiao et al.

Environmental sound classification (ESC) is a challenging problem due to the complexity of sounds. The ESC performance is heavily dependent on the effectiveness of representative features extracted from the environmental sounds. However, ESC often suffers from the semantically irrelevant frames and silent frames. In order to deal with this, we employ a frame-level attention model to focus on the semantically relevant frames and salient frames. Specifically, we first propose an convolutional recurrent neural network to learn spectro-temporal features and temporal correlations. Then, we extend our convolutional RNN model with a frame-level attention mechanism to learn discriminative feature representations for ESC. Experiments were conducted on ESC-50 and ESC-10 datasets. Experimental results demonstrated the effectiveness of the proposed method and achieved the state-of-the-art performance in terms of classification accuracy.

Xiaoyu Chen, Shugong Xu, Xudong Chen et al.

Transmission control protocol (TCP) congestion control is one of the key techniques to improve network performance. TCP congestion control algorithm identification (TCP identification) can be used to significantly improve network efficiency. Existing TCP identification methods can only be applied to limited number of TCP congestion control algorithms and focus on wired networks. In this paper, we proposed a machine learning based passive TCP identification method for wired and wireless networks. After comparing among three typical machine learning models, we concluded that the 4-layers Long Short Term Memory (LSTM) model achieves the best identification accuracy. Our approach achieves better than 98% accuracy in wired and wireless networks and works for newly proposed TCP congestion control algorithms.

Changhao Wu, Shugong Xu, Guocong Song et al.

Training a good deep learning model often requires a lot of annotated data. As a large amount of labeled data is typically difficult to collect and even more difficult to annotate, data augmentation and data generation are widely used in the process of training deep neural networks. However, there is no clear common understanding on how much labeled data is needed to get satisfactory performance. In this paper, we try to address such a question using vehicle license plate character recognition as an example application. We apply computer graphic scripts and Generative Adversarial Networks to generate and augment a large number of annotated, synthesized license plate images with realistic colors, fonts, and character composition from a small number of real, manually labeled license plate images. Generated and augmented data are mixed and used as training data for the license plate recognition network modified from DenseNet. The experimental results show that the model trained from the generated mixed training data has good generalization ability, and the proposed approach achieves a new state-of-the-art accuracy on Dataset-1 and AOLP, even with a very limited number of original real license plates. In addition, the accuracy improvement caused by data generation becomes more significant when the number of labeled images is reduced. Data augmentation also plays a more significant role when the number of labeled images is increased.

Zhichao Zhang, Shugong Xu, Shan Cao et al.

Environmental sound classification (ESC) is an important and challenging problem. In contrast to speech, sound events have noise-like nature and may be produced by a wide variety of sources. In this paper, we propose to use a novel deep convolutional neural network for ESC tasks. Our network architecture uses stacked convolutional and pooling layers to extract high-level feature representations from spectrogram-like features. Furthermore, we apply mixup to ESC tasks and explore its impacts on classification performance and feature distribution. Experiments were conducted on UrbanSound8K, ESC-50 and ESC-10 datasets. Our experimental results demonstrated that our ESC system has achieved the state-of-the-art performance (83.7%) on UrbanSound8K and competitive performance on ESC-50 and ESC-10.