Gilberto Berardinelli

SP
h-index75
6papers
23citations
Novelty49%
AI Score40

6 Papers

SPDec 30, 2022
Power Control for 6G Industrial Wireless Subnetworks: A Graph Neural Network Approach

Daniel Abode, Ramoni Adeogun, Gilberto Berardinelli

6th Generation (6G) industrial wireless subnetworks are expected to replace wired connectivity for control operation in robots and production modules. Interference management techniques such as centralized power control can improve spectral efficiency in dense deployments of such subnetworks. However, existing solutions for centralized power control may require full channel state information (CSI) of all the desired and interfering links, which may be cumbersome and time-consuming to obtain in dense deployments. This paper presents a novel solution for centralized power control for industrial subnetworks based on Graph Neural Networks (GNNs). The proposed method only requires the subnetwork positioning information, usually known at the central controller, and the knowledge of the desired link channel gain during the execution phase. Simulation results show that our solution achieves similar spectral efficiency as the benchmark schemes requiring full CSI in runtime operations. Also, robustness to changes in the deployment density and environment characteristics with respect to the training phase is verified.

9.4SYMay 7
Distributed Online Learning for Time-Critical Communication in 6G Industrial Subnetworks

Samira Abdelrahman, Hossam Farag, Gilberto Berardinelli

6G industrial in-X subnetworks are expected to support highly time-critical alarm reporting in large-scale environments characterized by mobility, bursty event-driven traffic, and limited radio resources. In such settings, conventional medium access solutions are ill-suited to guarantee reliable delivery of critical traffic, e.g., emergency alarms, within strict deadlines, especially when multiple subnetworks become simultaneously active after a common alarm event, a scenario widely referred as medium access with a shared message. This paper proposes a distributed deep reinforcement learning (DRL)-based medium access control protocol for timely alarm transmission in time-critical industrial subnetworks. The proposed method enables each local access point (LAP) to learn, in an online manner, to infer contention conditions from a broadcast contention-signature signal and to autonomously select a transmission pattern over the available channels using a lightweight deep neural network and an (ephsilon)-greedy policy. Simulation results demonstrate that the proposed approach consistently achieves a higher probability of in-time alarm delivery than benchmark random-access schemes, while exhibiting better scalability with increasing network density. For instance, the proposed method improves probability of in-time alarm delivery by at least 7% with a network size of 40 subnetworks, while the gain increases to 21% when the number of subnetworks increases to 60.

39.5SPApr 27
Beam Scheduling for Cross-Layer ISAC: A Deep Reinforcement Learning Approach

Xiyu Wang, Gilberto Berardinelli, Hei Victor Cheng et al.

Resource allocation in integrated sensing and communication (ISAC) systems needs to be optimized to balance the requirements of the communication and sensing modules considering complicated cross-layer data traffic and queue status in dynamic multi-user environments. This paper studies the beam allocation for cross-layer ISAC that achieves low-latency communication and minimizes sensing parameters estimation error. To handle the complex coupling between practical data buffer dynamics and varying wireless channels, we propose a deep reinforcement learning (DRL)-assisted approach. Rather than relying on explicit channel state information, the DRL-assisted beam allocation reduces feedback overhead by leveraging sensing observations. Simulation results verify that the DRL framework effectively takes buffer status into account and adapts to the wireless environment while allocating resources. The proposed multi-beam scheme improves overall throughput with only modest delay increases. Finally, the DRL-assisted beam management achieves both communication and sensing performance close to that of the genie-aided benchmark with perfect angle-of-departure (AoD) knowledge. These contributions advance the state-of-the-art intelligent resource management for ISAC systems.

NIDec 13, 2023
Unsupervised Graph-based Learning Method for Sub-band Allocation in 6G Subnetworks

Daniel Abode, Ramoni Adeogun, Lou Salaün et al.

In this paper, we present an unsupervised approach for frequency sub-band allocation in wireless networks using graph-based learning. We consider a dense deployment of subnetworks in the factory environment with a limited number of sub-bands which must be optimally allocated to coordinate inter-subnetwork interference. We model the subnetwork deployment as a conflict graph and propose an unsupervised learning approach inspired by the graph colouring heuristic and the Potts model to optimize the sub-band allocation using graph neural networks. The numerical evaluation shows that the proposed method achieves close performance to the centralized greedy colouring sub-band allocation heuristic with lower computational time complexity. In addition, it incurs reduced signalling overhead compared to iterative optimization heuristics that require all the mutual interfering channel information. We further demonstrate that the method is robust to different network settings.

LGMay 9, 2025
Learning Power Control Protocol for In-Factory 6G Subnetworks

Uyoata E. Uyoata, Gilberto Berardinelli, Ramoni Adeogun

In-X Subnetworks are envisioned to meet the stringent demands of short-range communication in diverse 6G use cases. In the context of In-Factory scenarios, effective power control is critical to mitigating the impact of interference resulting from potentially high subnetwork density. Existing approaches to power control in this domain have predominantly emphasized the data plane, often overlooking the impact of signaling overhead. Furthermore, prior work has typically adopted a network-centric perspective, relying on the assumption of complete and up-to-date channel state information (CSI) being readily available at the central controller. This paper introduces a novel multi-agent reinforcement learning (MARL) framework designed to enable access points to autonomously learn both signaling and power control protocols in an In-Factory Subnetwork environment. By formulating the problem as a partially observable Markov decision process (POMDP) and leveraging multi-agent proximal policy optimization (MAPPO), the proposed approach achieves significant advantages. The simulation results demonstrate that the learning-based method reduces signaling overhead by a factor of 8 while maintaining a buffer flush rate that lags the ideal "Genie" approach by only 5%.

SPMay 9, 2025
Multi-User Beamforming with Deep Reinforcement Learning in Sensing-Aided Communication

Xiyu Wang, Gilberto Berardinelli, Hei Victor Cheng et al.

Mobile users are prone to experience beam failure due to beam drifting in millimeter wave (mmWave) communications. Sensing can help alleviate beam drifting with timely beam changes and low overhead since it does not need user feedback. This work studies the problem of optimizing sensing-aided communication by dynamically managing beams allocated to mobile users. A multi-beam scheme is introduced, which allocates multiple beams to the users that need an update on the angle of departure (AoD) estimates and a single beam to the users that have satisfied AoD estimation precision. A deep reinforcement learning (DRL) assisted method is developed to optimize the beam allocation policy, relying only upon the sensing echoes. For comparison, a heuristic AoD-based method using approximated Cramér-Rao lower bound (CRLB) for allocation is also presented. Both methods require neither user feedback nor prior state evolution information. Results show that the DRL-assisted method achieves a considerable gain in throughput than the conventional beam sweeping method and the AoD-based method, and it is robust to different user speeds.