Pierre Gosselet

Pierre Gosselet, Christian Rey

The modern design of industrial structures leads to very complex simulations characterized by nonlinearities, high heterogeneities, tortuous geometries... Whatever the modelization may be, such an analysis leads to the solution to a family of large ill-conditioned linear systems. In this paper we study strategies to efficiently solve to linear system based on non-overlapping domain decomposition methods. We present a review of most employed approaches and their strong connections. We outline their mechanical interpretations as well as the practical issues when willing to implement and use them. Numerical properties are illustrated by various assessments from academic to industrial problems. An hybrid approach, mainly designed for multifield problems, is also introduced as it provides a general framework of such approaches.

Pierre Gosselet, Christian Rey, Daniel J. Rixen

The Balanced Domain Decomposition (BDD) method and the Finite Element Tearing and Interconnecting (FETI) method are two commonly used non-overlapping domain decomposition methods. Due to strong theoretical and numerical similarities, these two methods are generally considered as being equivalently efficient. However, for some particular cases, such as for structures with strong heterogeneities, FETI requires a large number of iterations to compute the solution compared to BDD. In this paper, the origin of the bad efficiency of FETI in these particular cases is traced back to poor initial estimates of the interface stresses. To improve the estimation of interface forces a novel strategy for splitting interface forces between neighboring substructures is proposed. The additional computational cost incurred is not significant. This yields a new initialization for the FETI method and restores numerical efficiency which makes FETI comparable to BDD even for problems where FETI was performing poorly. Various simple test problems are presented to discuss the efficiency of the proposed strategy and to illustrate the so-obtained numerical equivalence between the BDD and FETI solvers.

Guillaume Guguin, Olivier Allix, Pierre Gosselet et al.

In order to simulate the mechanical behavior of large structures assembled from thin composite panels, we propose a coupling technique which substitutes local 3D models for the global plate model in the critical zones where plate modeling is inadequate. The transition from 3D to 2D is based on stress and displacement distributions associated with Saint-Venant problems which are precalculated automatically for a simple 3D cell. The hybrid plate/3D model is obtained after convergence of a series of iterations between a global plate model of the structure and localized 3D models of the critical zones. This technique is nonintrusive because the global calculations can be carried out using commercial software. Evaluation tests show that convergence is fast and that the resulting hybrid model is very close to a full 3D model.

Olivier Allix, Pierre Kerfriden, Pierre Gosselet

In quasi-static nonlinear time-dependent analysis, the choice of the time discretization is a complex issue. The most basic strategy consists in determining a value of the load increment that ensures the convergence of the solution with respect to time on the base of preliminary simulations. In more advanced applications, the load increments can be controlled for instance by prescribing the number of iterations of the nonlinear resolution procedure, or by using an arc-length algorithm. These techniques usually introduce a parameter whose correct value is not easy to obtain. In this paper, an alternative procedure is proposed. It is based on the continuous control of the residual of the reference problem over time, whose measure is easy to interpret. This idea is applied in the framework of a multiscale domain decomposition strategy in order to perform 3D delamination analysis.

Karin Saavedra, Olivier Allix, Pierre Gosselet

This paper investigates a computational strategy for studying the interactions between multiple through-the-width delaminations and global or local buckling in composite laminates taking into account possible contact between the delaminated surfaces. In order to achieve an accurate prediction of the quasi-static response, a very refined discretization of the structure is required, leading to the resolution of very large and highly nonlinear numerical problems. In this paper, a nonlinear finite element formulation along with a parallel iterative scheme based on a multiscale domain decomposition are used for the computation of 3D mesoscale models. Previous works by the authors already dealt with the simulation of multiscale delamination assuming small perturbations. This paper presents the formulation used to include geometric nonlinearities into this existing multiscale framework and discusses the adaptations that need to be made to the iterative process in order to ensure the rapid convergence and the scalability of the method in the presence of buckling and delamination. These various adaptations are illustrated by simulations involving large numbers of DOFs.

Augustin Parret-Fréaud, Christian Rey, Pierre Gosselet et al.

This paper presents a strategy for a posteriori error estimation for substructured problems solved by non-overlapping domain decomposition methods. We focus on global estimates of the discretization error obtained through the error in constitutive relation for linear mechanical problems. Our method allows to compute error estimate in a fully parallel way for both primal (BDD) and dual (FETI) approaches of non-overlapping domain decomposition whatever the state (converged or not) of the associated iterative solver. Results obtained on an academic problem show that the strategy we propose is efficient in the sense that correct estimation is obtained with fully parallel computations; they also indicate that the estimation of the discretization error reaches sufficient precision in very few iterations of the domain decomposition solver, which enables to consider highly effective adaptive computational strategies.

Camille Negrello, Pierre Gosselet, Christian Rey et al.

We investigate the use of non-overlapping domain decomposition (DD) methods for nonlinear structure problems. The classic techniques would combine a global Newton solver with a linear DD solver for the tangent systems. We propose a framework where we can swap Newton and DD, so that we solve independent nonlinear problems for each substructure and linear condensed interface problems. The objective is to decrease the number of communications between subdomains and to improve parallelism. Depending on the interface condition, we derive several formulations which are not equivalent, contrarily to the linear case. Primal, dual and mixed variants are described and assessed on a simple plasticity problem.

Valentine Rey, Pierre Gosselet, Christian Rey

This article deals with the computation of guaranteed lower bounds of the error in the framework of finite element (FE) and domain decomposition (DD) methods. In addition to a fully parallel computation, the proposed lower bounds separate the algebraic error (due to the use of a DD iterative solver) from the discretization error (due to the FE), which enables the steering of the iterative solver by the discretization error. These lower bounds are also used to improve the goal-oriented error estimation in a substructured context. Assessments on 2D static linear mechanic problems illustrate the relevance of the separation of sources of error and the lower bounds' independence from the substructuring. We also steer the iterative solver by an objective of precision on a quantity of interest. This strategy consists in a sequence of solvings and takes advantage of adaptive remeshing and recycling of search directions.

Pierre Gosselet, Daniel J. Rixen, Christian Rey

This paper presents a strategy for the computation of structures with repeated patterns based on domain decomposition and block Krylov solvers. It can be seen as a special variant of the FETI method. We propose using the presence of repeated domains in the problem to compute the solution by minimizing the interface error on several directions simultaneously. The method not only drastically decreases the size of the problems to solve but also accelerates the convergence of interface problem for nearly no additional computational cost and minimizes expensive memory accesses. The numerical performances are illustrated on some thermal and elastic academic problems.

Augustin Parret-Fréaud, Valentine Rey, Pierre Gosselet et al.

This paper investigates the question of the building of admissible stress field in a substructured context. More precisely we analyze the special role played by multiple points. This study leads to (1) an improved recovery of the stress field, (2) an opportunity to minimize the estimator in the case of heterogeneous structures (in the parallel and sequential case), (3) a procedure to build admissible fields for FETI-DP and BDDC methods leading to an error bound which separates the contributions of the solver and of the discretization.

Guillaume Guguin, Olivier Allix, Pierre Gosselet et al.

Most large engineering structures are described as assemblies of plates and shells and they are computed as such using adhoc Finite Element packages. In fact their computation in 3D would be much too costly. In this framework, the connections between the parts are often modeled by means of simplified tying models. In order to improve the reliability of such simulations, we propose to apply a non-intrusive technique so as to virtually substitute the simplified connectors by a precise 3D nonlinear model, without modifying the global plate model. Moreover each computation can be conducted on independent optimized software. After a description of the method, examples are used to analyze its performance, and to draw some conclusions on the validity and limitation of both the modeling of junction by rigid connectors and the use of submodeling techniques for the estimation of the carrying capacity of bolted plates.