Andrea Mola

Nicola Demo, Marco Tezzele, Andrea Mola et al.

In this contribution, we present the results of the application of a parameter space reduction methodology based on active subspaces to the hull hydrodynamic design problem. Several parametric deformations of an initial hull shape are considered to assess the influence of the shape parameters considered on the hull total drag. The hull resistance is typically computed by means of numerical simulations of the hydrodynamic flow past the ship. Given the high number of parameters involved - which might result in a high number of time consuming hydrodynamic simulations - assessing whether the parameters space can be reduced would lead to considerable computational cost reduction. Thus, the main idea of this work is to employ the active subspaces to identify possible lower dimensional structures in the parameter space, or to verify the parameter distribution in the position of the control points. To this end, a fully automated procedure has been implemented to produce several small shape perturbations of an original hull CAD geometry which are then used to carry out high-fidelity flow simulations and collect data for the active subspaces analysis. To achieve full automation of the open source pipeline described, both the free form deformation methodology employed for the hull perturbations and the solver based on unsteady potential flow theory, with fully nonlinear free surface treatment, are directly interfaced with CAD data structures and operate using IGES vendor-neutral file formats as input files. The computational cost of the fluid dynamic simulations is further reduced through the application of dynamic mode decomposition to reconstruct the steady state total drag value given only few initial snapshots of the simulation. The active subspaces analysis is here applied to the geometry of the DTMB-5415 naval combatant hull, which is a common benchmark in ship hydrodynamics simulations.

Giovanni Stabile, Saddam Hijazi, Andrea Mola et al.

Vortex shedding around circular cylinders is a well known and studied phenomenon that appears in many engineering fields. A Reduced Order Model (ROM) of the incompressible flow around a circular cylinder is presented in this work. The ROM is built performing a Galerkin projection of the governing equations onto a lower dimensional space. The reduced basis space is generated using a Proper Orthogonal Decomposition (POD) approach. In particular the focus is into (i) the correct reproduction of the pressure field, that in case of the vortex shedding phenomenon, is of primary importance for the calculation of the drag and lift coefficients; (ii) the projection of the Governing equations (momentum equation and Poisson equation for pressure) performed onto different reduced basis space for velocity and pressure, respectively; (iii) all the relevant modifications necessary to adapt standard finite element POD-Galerkin methods to a finite volume framework. The accuracy of the reduced order model is assessed against full order results.

Gianluigi Rozza, Haris Malik, Nicola Demo et al.

Reduced order modeling has gained considerable attention in recent decades owing to the advantages offered in reduced computational times and multiple solutions for parametric problems. The focus of this manuscript is the application of model order reduction techniques in various engineering and scientific applications including but not limited to mechanical, naval and aeronautical engineering. The focus here is kept limited to computational fluid mechanics and related applications. The advances in the reduced order modeling with proper orthogonal decomposition and reduced basis method are presented as well as a brief discussion of dynamic mode decomposition and also some present advances in the parameter space reduction. Here, an overview of the challenges faced and possible solutions are presented with examples from various problems.

Marco Tezzele, Nicola Demo, Andrea Mola et al.

In this work we present an integrated computational pipeline involving several model order reduction techniques for industrial and applied mathematics, as emerging technology for product and/or process design procedures. Its data-driven nature and its modularity allow an easy integration into existing pipelines. We describe a complete optimization framework with automated geometrical parameterization, reduction of the dimension of the parameter space, and non-intrusive model order reduction such as dynamic mode decomposition and proper orthogonal decomposition with interpolation. Moreover several industrial examples are illustrated.

Andrea Mola, Luca Heltai, Antonio DeSimone

We present an innovative numerical discretization of the equations of inviscid potential flow for the simulation of three dimensional unsteady and nonlinear water waves generated by a ship hull advancing in water. The equations of motion are written in a semi-Lagrangian framework, and the resulting integro-differential equations are discretized in space via an adaptive iso-parametric collocation Boundary Element Method, and in time via adaptive implicit Backward Differentiation Formulas (BDF) with variable step and variable order. When the velocity of the advancing ship hull is non-negligible, the semi-Lagrangian formulation (also known as Arbitrary Lagrangian Eulerian formulation, or ALE) of the free surface equations contains dominant transport terms which are stabilized with a Streamwise Upwind Petrov-Galerkin (SUPG) method. The SUPG stabilization allows automatic and robust adaptation of the spatial discretization with unstructured quadrilateral grids. Preliminary results are presented where we compare our numerical model with experimental results on the case of a Wigley hull advancing in calm water with fixed sink and trim.

Marco Tezzele, Filippo Salmoiraghi, Andrea Mola et al.

We present the results of the first application in the naval architecture field of a methodology based on active subspaces properties for parameters space reduction. The physical problem considered is the one of the simulation of the hydrodynamic flow past the hull of a ship advancing in calm water. Such problem is extremely relevant at the preliminary stages of the ship design, when several flow simulations are typically carried out by the engineers to assess the dependence of the hull total resistance on the geometrical parameters of the hull, and others related with flows and hull properties. Given the high number of geometric and physical parameters which might affect the total ship drag, the main idea of this work is to employ the active subspaces properties to identify possible lower dimensional structures in the parameter space. Thus, a fully automated procedure has been implemented to produce several small shape perturbations of an original hull CAD geometry, in order to exploit the resulting shapes to run high fidelity flow simulations with different structural and physical parameters as well, and then collect data for the active subspaces analysis. The free form deformation procedure used to morph the hull shapes, the high fidelity solver based on potential flow theory with fully nonlinear free surface treatment, and the active subspaces analysis tool employed in this work have all been developed and integrated within SISSA math- Lab as open source tools. The contribution will also discuss several details of the implementation of such tools, as well as the results of their application to the selected target engineering problem.

Nicola Demo, Marco Tezzele, Andrea Mola et al.

In the reduced order modeling (ROM) framework, the solution of a parametric partial differential equation is approximated by combining the high-fidelity solutions of the problem at hand for several properly chosen configurations. Examples of the ROM application, in the naval field, can be found in [31, 24]. Mandatory ingredient for the ROM methods is the relation between the high-fidelity solutions and the parameters. Dealing with geometrical parameters, especially in the industrial context, this relation may be unknown and not trivial (simulations over hand morphed geometries) or very complex (high number of parameters or many nested morphing techniques). To overcome these scenarios, we propose in this contribution an efficient and complete data-driven framework involving ROM techniques for shape design and optimization, extending the pipeline presented in [7]. By applying the singular value decomposition (SVD) to the points coordinates defining the hull geometry - assuming the topology is inaltered by the deformation -, we are able to compute the optimal space which the deformed geometries belong to, hence using the modal coefficients as the new parameters we can reconstruct the parametric formulation of the domain. Finally the output of interest is approximated using the proper orthogonal decomposition with interpolation technique. To conclude, we apply this framework to a naval shape design problem where the bulbous bow is morphed to reduce the total resistance of the ship advancing in calm water.

Andrea Mola, Marco Tezzele, Mahmoud Gadalla et al.

In this work, we present the results of a ship propeller design optimization campaign carried out in the framework of the research project PRELICA, funded by the Friuli Venezia Giulia regional government. The main idea of this work is to operate on a multidisciplinary level to identify propeller shapes that lead to reduced tip vortex-induced pressure and increased efficiency without altering the thrust. First, a specific tool for the bottom-up construction of parameterized propeller blade geometries has been developed. The algorithm proposed operates with a user defined number of arbitrary shaped or NACA airfoil sections, and employs arbitrary degree NURBS to represent the chord, pitch, skew and rake distribution as a function of the blade radial coordinate. The control points of such curves have been modified to generate, in a fully automated way, a family of blade geometries depending on as many as 20 shape parameters. Such geometries have then been used to carry out potential flow simulations with the Boundary Element Method based software PROCAL. Given the high number of parameters considered, such a preliminary stage allowed for a fast evaluation of the performance of several hundreds of shapes. In addition, the data obtained from the potential flow simulation allowed for the application of a parameter space reduction methodology based on active subspaces (AS) property, which suggested that the main propeller performance indices are, at a first but rather accurate approximation, only depending on a single parameter which is a linear combination of all the original geometric ones. AS analysis has also been used to carry out a constrained optimization exploiting response surface method in the reduced parameter space, and a sensitivity analysis based on such surrogate model. The few selected shapes were finally used to set up high fidelity RANS simulations and select an optimal shape.

Marco Tezzele, Nicola Demo, Mahmoud Gadalla et al.

We present the results of the application of a parameter space reduction methodology based on active subspaces (AS) to the hull hydrodynamic design problem. Several parametric deformations of an initial hull shape are considered to assess the influence of the shape parameters on the hull wave resistance. Such problem is relevant at the preliminary stages of the ship design, when several flow simulations are carried out by the engineers to establish a certain sensibility with respect to the parameters, which might result in a high number of time consuming hydrodynamic simulations. The main idea of this work is to employ the AS to identify possible lower dimensional structures in the parameter space. The complete pipeline involves the use of free form deformation to parametrize and deform the hull shape, the high fidelity solver based on unsteady potential flow theory with fully nonlinear free surface treatment directly interfaced with CAD, the use of dynamic mode decomposition to reconstruct the final steady state given only few snapshots of the simulation, and the reduction of the parameter space by AS, and shared subspace. Response surface method is used to minimize the total drag.