David J. Hill

James J. Q. Yu, Albert Y. S. Lam, David J. Hill et al.

Wide area measurement system (WAMS) is one of the essential components in the future power system. To make WAMS construction plans, practical models of the power network observability, reliability, and underlying communication infrastructures need to be considered. To address this challenging problem, in this paper we propose a unified framework for WAMS planning to cover most realistic concerns in the construction process. The framework jointly optimizes the system construction cost, measurement reliability, and volume of synchrophasor data traffic resulting in a multi-objective optimization problem, which provides multiple Pareto optimal solutions to suit different requirements by the utilities. The framework is verified on two IEEE test systems. The simulation results demonstrate the trade-off relationships among the proposed objectives. Moreover, the proposed framework can develop optimal WAMS plans for full observability with minimal cost. This work develops a comprehensive framework for most practical WAMS construction designs.

Ji Xiang, Yanjun Li, David J. Hill

This paper investigates a new class of linear multi-agent network systems, in which nodes are coupled by dynamic edges in the sense that each edge has a dynamic system attached as well. The outputs of the edge dynamic systems form the external inputs of the node dynamic systems, which are termed "neighboring inputs" representing the coupling actions between nodes. The outputs of the node dynamic systems are the inputs of the edge dynamic systems. Several cooperative output regulation problems are posed, including output synchronization, output cooperation and master-slave output cooperation. Output cooperation is specified as making the neighboring input, a weighted sum of edge outputs, track a predefined trajectory by cooperation of node outputs. Distributed cooperative output regulation controllers depending on local state and neighboring inputs are presented, which are designed by combining feedback passivity theories and the internal model principle. A simulation example on the cooperative current control of an electrical network illustrates the potential applications of the analytical results.

Lijun Zhu, David J. Hill

The transient stability of power systems and synchronization of non-uniform Kuramoto oscillators are closely related problems. In this paper, we develop a novel regional stability analysis framework based on the proposed region-parametrized Lyapunov function to solve the problems. Also, a new synchronization definition is introduced and characterized by frequency boundedness and angle cohesiveness, the latter of which requires angles of any two connected nodes rather than any two arbitrary nodes to stay cohesive. It allows to take power fluctuations into explicit account as disturbances and can lead to less conservative stability condition. Applying the analysis framework, we derive two algebraic stability conditions for power systems that relate the underlying network topology and system parameters to the stability. Finally, to authors' best knowledge, we first explicitly give the estimation of region of attraction for power systems. The analysis is verified via numerical simulation showing that two stability conditions can complement each other for predicting the stability.

Lijun Zhu, Zhiyong Chen, David J. Hill et al.

The paper proposes a novel event-triggered control scheme for nonlinear systems based on the input-delay method. Specifically, the closed-loop system is associated with a pair of auxiliary input and output. The auxiliary output is defined as the derivative of the continuous-time input function, while the auxiliary input is defined as the input disturbance caused by the sampling or equivalently the integral of the auxiliary output over the sampling period. As a result, a cyclic mapping forms from the input to the output via the system dynamics and back from the output to the input via the integral. The event-triggering law is constructed to make the mapping contractive such that the stabilization is achieved and an easy-to-check Zeno-free condition is provided. With this idea, we develop a theorem for the event-triggered control of interconnected nonlinear systems which is employed to solve the event-triggered control for lower-triangular systems with dynamic uncertainties.

Lijun Zhu, Zhiyong Chen, Xi Chen et al.

This paper studies a stabilization problem for linear MIMO systems subject to external perturbation that further requires the closed-loop system render a specified gain from the external perturbation to the output. The problem arises from control of networked systems, in particular, robust output synchronization of heterogeneous linear MIMO multi-agent systems via output feedback/communication. We propose a new approach that converts a class of MIMO systems into a normal form via repeated singular value decomposition and prove that a stabilization controller with a specified external gain can be explicitly constructed for the normal form.Two scenarios with static state feedback and dynamic output feedback are investigated. By integrating the reference model and internal model techniques, the robust output synchronization problem for MIMO multi-agent systems is converted into a stabilization problem with a specified externalgain and solved by the developed approach.

Tong Han, Yan Xu, David J. Hill

Power grids are facing major challenges from growing renewable integration and worsening climate impacts. While flexibility on both the demand and generation sides has been widely explored to address these challenges, network-side flexibility, especially in network topology, remains highly underutilized. Advances in communication, power electronics, and circuit breakers have made network topology increasingly controllable. However, leveraging this topological flexibility poses substantial challenges, primarily due to the inherent non-convexity and hybrid dynamics in associated optimization and control problems. This monograph surveys the development of power grid topology control in both early and recent years. It begins by discussing the fundamental topological constraints involved in topology control problems. Subsequently, it introduces steady-state topology control for transmission and distribution networks separately, covering fundamentals, a state-of-the-art review, and representative recent advances. Additionally, the network topology transition problem, which addresses the implementation of optimal topology solutions and has garnered increasing attention in recent years, is further modeled and analyzed. Beyond utilizing the flexibility of steady-state network topology, controlling network topology during transients can also contribute to system stabilization. Traditional approaches, such as intentional controlled islanding for transmission networks, as well as recently developed topology control methods for microgrid stabilization, exemplify this concept. Finally, a summary of this monograph is provided.

A. E. Tio, D. J. Hill, J. Ma

The integration of more intermittent generation, energy storage, and dynamic loads on top of a competitive market environment requires future grids to handle increasing diversity of power injection states. Grid planners need new tools and metrics that can assess how vulnerable grids are against this future. To this end, we propose grid inadequacy metrics that expose grid inability to accommodate power injection diversity from such sources. We define the metrics based on a previously unexplored characterization of grid inadequacy, that is, the size of the DC power flow infeasible set relative to the size of the power injection set is indicative of inherent grid inadequacy to accommodate power injection diversity without intervention. We circumvent the difficulty of characterizing the high-dimensional sets involved using three approaches: one sampling-based approach and two approaches that project the sets in lower dimensions. Illustrative examples show how the metrics can reveal useful insights about a grid. As with other metrics, the proposed metrics are only valid relative to the assumptions used and cannot capture all intricacies of assessing grid inadequacy. Nevertheless, the metrics provide a new way of quantifying grid inadequacy that is potentially useful in future research and practice. We present possible use-cases where the proposed metrics can be used.

Ahmad Shabir Ahmadyar, Shariq Riaz, Gregor Verbic et al.

The increasing penetration of non-synchronous renewable energy sources (NS-RES) alters the dynamic characteristic, and consequently, the frequency behaviour of a power system. To accurately identify these changing trends and address them in a systematic way, it is necessary to assess a large number of scenarios. Given this, we propose a frequency stability assessment framework based on a time-series approach that facilitates the analysis of a large number of future power system scenarios. We use this framework to assess the frequency stability of the Australian future power system by considering a large number of future scenarios and sensitivity of different parameters. By doing this, we identify a maximum non-synchronous instantaneous penetration range from the frequency stability point of view. Further, to reduce the detrimental impacts of high NS-RES penetration on system frequency stability, a dynamic inertia constraint is derived and incorporated in the market dispatch model. The results show that such a constraint guarantees frequency stability of the system for all credible contingencies. Also, we assess and quantify the contribution of synchronous condensers, synthetic inertia of wind farms and a governor-like response from de-loaded wind farms on system frequency stability. The results show that the last option is the most effective one.

James J. Q. Yu, David J. Hill, Albert Y. S. Lam et al.

Online identification of post-contingency transient stability is essential in power system control, as it facilitates the grid operator to decide and coordinate system failure correction control actions. Utilizing machine learning methods with synchrophasor measurements for transient stability assessment has received much attention recently with the gradual deployment of wide-area protection and control systems. In this paper, we develop a transient stability assessment system based on the long short-term memory network. By proposing a temporal self-adaptive scheme, our proposed system aims to balance the trade-off between assessment accuracy and response time, both of which may be crucial in real-world scenarios. Compared with previous work, the most significant enhancement is that our system learns from the temporal data dependencies of the input data, which contributes to better assessment accuracy. In addition, the model structure of our system is relatively less complex, speeding up the model training process. Case studies on three power systems demonstrate the efficacy of the proposed transient stability assessment system.