Yunshan Zhong

Yunshan Zhong, Mingbao Lin, Xunchao Li et al.

Light-weight super-resolution (SR) models have received considerable attention for their serviceability in mobile devices. Many efforts employ network quantization to compress SR models. However, these methods suffer from severe performance degradation when quantizing the SR models to ultra-low precision (e.g., 2-bit and 3-bit) with the low-cost layer-wise quantizer. In this paper, we identify that the performance drop comes from the contradiction between the layer-wise symmetric quantizer and the highly asymmetric activation distribution in SR models. This discrepancy leads to either a waste on the quantization levels or detail loss in reconstructed images. Therefore, we propose a novel activation quantizer, referred to as Dynamic Dual Trainable Bounds (DDTB), to accommodate the asymmetry of the activations. Specifically, DDTB innovates in: 1) A layer-wise quantizer with trainable upper and lower bounds to tackle the highly asymmetric activations. 2) A dynamic gate controller to adaptively adjust the upper and lower bounds at runtime to overcome the drastically varying activation ranges over different samples.To reduce the extra overhead, the dynamic gate controller is quantized to 2-bit and applied to only part of the SR networks according to the introduced dynamic intensity. Extensive experiments demonstrate that our DDTB exhibits significant performance improvements in ultra-low precision. For example, our DDTB achieves a 0.70dB PSNR increase on Urban100 benchmark when quantizing EDSR to 2-bit and scaling up output images to x4. Code is at \url{https://github.com/zysxmu/DDTB}.

Yuxin Zhang, Yiting Luo, Mingbao Lin et al.

We focus on addressing the dense backward propagation issue for training efficiency of N:M fine-grained sparsity that preserves at most N out of M consecutive weights and achieves practical speedups supported by the N:M sparse tensor core. Therefore, we present a novel method of Bi-directional Masks (Bi-Mask) with its two central innovations in: 1) Separate sparse masks in the two directions of forward and backward propagation to obtain training acceleration. It disentangles the forward and backward weight sparsity and overcomes the very dense gradient computation. 2) An efficient weight row permutation method to maintain performance. It picks up the permutation candidate with the most eligible N:M weight blocks in the backward to minimize the gradient gap between traditional uni-directional masks and our bi-directional masks. Compared with existing uni-directional scenario that applies a transposable mask and enables backward acceleration, our Bi-Mask is experimentally demonstrated to be more superior in performance. Also, our Bi-Mask performs on par with or even better than methods that fail to achieve backward acceleration. Project of this paper is available at \url{https://github.com/zyxxmu/Bi-Mask}.

Yunshan Zhong, Gongrui Nan, Yuxin Zhang et al.

Quantization-aware training (QAT) receives extensive popularity as it well retains the performance of quantized networks. In QAT, the contemporary experience is that all quantized weights are updated for an entire training process. In this paper, this experience is challenged based on an interesting phenomenon we observed. Specifically, a large portion of quantized weights reaches the optimal quantization level after a few training epochs, which we refer to as the partly scratch-off lottery ticket. This straightforward-yet-valuable observation naturally inspires us to zero out gradient calculations of these weights in the remaining training period to avoid meaningless updating. To effectively find the ticket, we develop a heuristic method, dubbed lottery ticket scratcher (LTS), which freezes a weight once the distance between the full-precision one and its quantization level is smaller than a controllable threshold. Surprisingly, the proposed LTS typically eliminates 50%-70% weight updating and 25%-35% FLOPs of the backward pass, while still resulting on par with or even better performance than the compared baseline. For example, compared with the baseline, LTS improves 2-bit MobileNetV2 by 5.05%, eliminating 46% weight updating and 23% FLOPs of the backward pass. Code is at url{https://github.com/zysxmu/LTS}.

Yunshan Zhong, Lizhou You, Yuxin Zhang et al.

Most shadow removal methods rely on the invasion of training images associated with laborious and lavish shadow region annotations, leading to the increasing popularity of shadow image synthesis. However, the poor performance also stems from these synthesized images since they are often shadow-inauthentic and details-impaired. In this paper, we present a novel generation framework, referred to as HQSS, for high-quality pseudo shadow image synthesis. The given image is first decoupled into a shadow region identity and a non-shadow region identity. HQSS employs a shadow feature encoder and a generator to synthesize pseudo images. Specifically, the encoder extracts the shadow feature of a region identity which is then paired with another region identity to serve as the generator input to synthesize a pseudo image. The pseudo image is expected to have the shadow feature as its input shadow feature and as well as a real-like image detail as its input region identity. To fulfill this goal, we design three learning objectives. When the shadow feature and input region identity are from the same region identity, we propose a self-reconstruction loss that guides the generator to reconstruct an identical pseudo image as its input. When the shadow feature and input region identity are from different identities, we introduce an inter-reconstruction loss and a cycle-reconstruction loss to make sure that shadow characteristics and detail information can be well retained in the synthesized images. Our HQSS is observed to outperform the state-of-the-art methods on ISTD dataset, Video Shadow Removal dataset, and SRD dataset. The code is available at https://github.com/zysxmu/HQSS.

Yunshan Zhong, You Huang, Jiawei Hu et al.

Post-training quantization (PTQ) for vision transformers (ViTs) has received increasing attention from both academic and industrial communities due to its minimal data needs and high time efficiency. However, many current methods fail to account for the complex interactions between quantized weights and activations, resulting in significant quantization errors and suboptimal performance. This paper presents ERQ, an innovative two-step PTQ method specifically crafted to reduce quantization errors arising from activation and weight quantization sequentially. The first step, Activation quantization error reduction (Aqer), first applies Reparameterization Initialization aimed at mitigating initial quantization errors in high-variance activations. Then, it further mitigates the errors by formulating a Ridge Regression problem, which updates the weights maintained at full-precision using a closed-form solution. The second step, Weight quantization error reduction (Wqer), first applies Dual Uniform Quantization to handle weights with numerous outliers, which arise from adjustments made during Reparameterization Initialization, thereby reducing initial weight quantization errors. Then, it employs an iterative approach to further tackle the errors. In each iteration, it adopts Rounding Refinement that uses an empirically derived, efficient proxy to refine the rounding directions of quantized weights, complemented by a Ridge Regression solver to reduce the errors. Comprehensive experimental results demonstrate ERQ's superior performance across various ViTs variants and tasks. For example, ERQ surpasses the state-of-the-art GPTQ by a notable 36.81% in accuracy for W3A4 ViT-S. Our codes are available at https://github.com/zysxmu/ERQ.

Yunshan Zhong, Jiawei Hu, Mingbao lin et al.

Albeit the scalable performance of vision transformers (ViTs), the dense computational costs (training & inference) undermine their position in industrial applications. Post-training quantization (PTQ), tuning ViTs with a tiny dataset and running in a low-bit format, well addresses the cost issue but unluckily bears more performance drops in lower-bit cases. In this paper, we introduce I&S-ViT, a novel method that regulates the PTQ of ViTs in an inclusive and stable fashion. I&S-ViT first identifies two issues in the PTQ of ViTs: (1) Quantization inefficiency in the prevalent log2 quantizer for post-Softmax activations; (2) Rugged and magnified loss landscape in coarse-grained quantization granularity for post-LayerNorm activations. Then, I&S-ViT addresses these issues by introducing: (1) A novel shift-uniform-log2 quantizer (SULQ) that incorporates a shift mechanism followed by uniform quantization to achieve both an inclusive domain representation and accurate distribution approximation; (2) A three-stage smooth optimization strategy (SOS) that amalgamates the strengths of channel-wise and layer-wise quantization to enable stable learning. Comprehensive evaluations across diverse vision tasks validate I&S-ViT' superiority over existing PTQ of ViTs methods, particularly in low-bit scenarios. For instance, I&S-ViT elevates the performance of 3-bit ViT-B by an impressive 50.68%.

Yunshan Zhong, Yuyao Zhou, Yuxin Zhang et al.

This paper focuses on addressing the issue of image demoireing. Unlike the large volume of existing studies that rely on learning from paired real data, we attempt to learn a demoireing model from unpaired real data, i.e., moire images associated with irrelevant clean images. The proposed method, referred to as Unpaired Demoireing (UnDeM), synthesizes pseudo moire images from unpaired datasets, generating pairs with clean images for training demoireing models. To achieve this, we divide real moire images into patches and group them in compliance with their moire complexity. We introduce a novel moire generation framework to synthesize moire images with diverse moire features, resembling real moire patches, and details akin to real moire-free images. Additionally, we introduce an adaptive denoise method to eliminate the low-quality pseudo moire images that adversely impact the learning of demoireing models. We conduct extensive experiments on the commonly-used FHDMi and UHDM datasets. Results manifest that our UnDeM performs better than existing methods when using existing demoireing models such as MBCNN and ESDNet-L. Code: https://github.com/zysxmu/UnDeM

Ryo Yoshida, Takami Sato, Wenlun Zhang et al.

LiDAR sensors are critical for autonomous driving perception, yet remain vulnerable to spoofing attacks. Jamming attacks inject high-frequency laser pulses that completely blind LiDAR sensors by overwhelming authentic returns with malicious signals. We discover that while point clouds become randomized, the underlying full-waveform data retains distinguishable signatures between attack and legitimate signals. In this work, we propose PULSAR-Net, capable of reconstructing authentic point clouds under jamming attacks by leveraging previously underutilized intermediate full-waveform representations and simultaneous laser sensing in modern LiDAR systems. PULSAR-Net adopts a novel U-Net architecture with axial spatial attention mechanisms specifically designed to identify attack-induced signals from authentic object returns in the full-waveform representation. To address the lack of full-waveform representations in existing LiDAR datasets under jamming attacks, we introduce a physics-aware dataset generation pipeline that synthesizes realistic full-waveform representations under jamming attacks. Despite being trained exclusively on synthetic data, PULSAR-Net achieves reconstruction rates of 92% and 73% for vehicles obscured by jamming attacks in real-world static and driving scenarios, respectively.

Yunshan Zhong, Yanwei Qi, Yuxin Zhang

With the growing demand for high-quality image generation on resource-constrained devices, efficient diffusion models have received increasing attention. However, such models suffer from approximation errors introduced by efficiency techniques, which significantly degrade generation quality. Once deployed, these errors are difficult to correct, as modifying the model is typically infeasible in deployment environments. Through an analysis of error propagation across diffusion timesteps, we reveal that these approximation errors can accumulate exponentially, severely impairing output quality. Motivated by this insight, we propose Iterative Error Correction (IEC), a novel test-time method that mitigates inference-time errors by iteratively refining the model's output. IEC is theoretically proven to reduce error propagation from exponential to linear growth, without requiring any retraining or architectural changes. IEC can seamlessly integrate into the inference process of existing diffusion models, enabling a flexible trade-off between performance and efficiency. Extensive experiments show that IEC consistently improves generation quality across various datasets, efficiency techniques, and model architectures, establishing it as a practical and generalizable solution for test-time enhancement of efficient diffusion models.

Yunshan Zhong, Yuyao Zhou, Yuxin Zhang et al.

Data-free quantization (DFQ) enables model quantization without accessing real data, addressing concerns regarding data security and privacy. With the growing adoption of Vision Transformers (ViTs), DFQ for ViTs has garnered significant attention. However, existing DFQ methods exhibit two limitations: (1) semantic distortion, where the semantics of synthetic images deviate substantially from those of real images, and (2) semantic inadequacy, where synthetic images contain extensive regions with limited content and oversimplified textures, leading to suboptimal quantization performance. To address these limitations, we propose SARDFQ, a novel Semantics Alignment and Reinforcement Data-Free Quantization method for ViTs. To address semantic distortion, SARDFQ incorporates Attention Priors Alignment (APA), which optimizes synthetic images to follow randomly generated structure attention priors. To mitigate semantic inadequacy, SARDFQ introduces Multi-Semantic Reinforcement (MSR), leveraging localized patch optimization to enhance semantic richness across synthetic images. Furthermore, SARDFQ employs Soft-Label Learning (SL), wherein multiple semantic targets are adapted to facilitate the learning of multi-semantic images augmented by MSR. Extensive experiments demonstrate the effectiveness of SARDFQ, significantly surpassing existing methods. For example, SARDFQ improves top-1 accuracy on ImageNet by 15.52% for W4A4 ViT-B. The code is at https://github.com/zysxmu/SARDFQ.

Yunshan Zhong, Yuyao Zhou, Fei Chao et al.

Arbitrary bit-width network quantization has received significant attention due to its high adaptability to various bit-width requirements during runtime. However, in this paper, we investigate existing methods and observe a significant accumulation of quantization errors caused by switching weight and activations bit-widths, leading to limited performance. To address this issue, we propose MBQuant, a novel method that utilizes a multi-branch topology for arbitrary bit-width quantization. MBQuant duplicates the network body into multiple independent branches, where the weights of each branch are quantized to a fixed 2-bit and the activations remain in the input bit-width. The computation of a desired bit-width is completed by selecting an appropriate number of branches that satisfy the original computational constraint. By fixing the weight bit-width, this approach substantially reduces quantization errors caused by switching weight bit-widths. Additionally, we introduce an amortization branch selection strategy to distribute quantization errors caused by switching activation bit-widths among branches to improve performance. Finally, we adopt an in-place distillation strategy that facilitates guidance between branches to further enhance MBQuant's performance. Extensive experiments demonstrate that MBQuant achieves significant performance gains compared to existing arbitrary bit-width quantization methods. Code is at https://github.com/zysxmu/MultiQuant.

Yunshan Zhong, Mingbao Lin, Jingjing Xie et al.

This paper introduces Distribution-Flexible Subset Quantization (DFSQ), a post-training quantization method for super-resolution networks. Our motivation for developing DFSQ is based on the distinctive activation distributions of current super-resolution models, which exhibit significant variance across samples and channels. To address this issue, DFSQ conducts channel-wise normalization of the activations and applies distribution-flexible subset quantization (SQ), wherein the quantization points are selected from a universal set consisting of multi-word additive log-scale values. To expedite the selection of quantization points in SQ, we propose a fast quantization points selection strategy that uses K-means clustering to select the quantization points closest to the centroids. Compared to the common iterative exhaustive search algorithm, our strategy avoids the enumeration of all possible combinations in the universal set, reducing the time complexity from exponential to linear. Consequently, the constraint of time costs on the size of the universal set is greatly relaxed. Extensive evaluations of various super-resolution models show that DFSQ effectively retains performance even without fine-tuning. For example, when quantizing EDSRx2 on the Urban benchmark, DFSQ achieves comparable performance to full-precision counterparts on 6- and 8-bit quantization, and incurs only a 0.1 dB PSNR drop on 4-bit quantization. Code is at \url{https://github.com/zysxmu/DFSQ}

Yunshan Zhong, Mingbao Lin, Gongrui Nan et al.

Learning to synthesize data has emerged as a promising direction in zero-shot quantization (ZSQ), which represents neural networks by low-bit integer without accessing any of the real data. In this paper, we observe an interesting phenomenon of intra-class heterogeneity in real data and show that existing methods fail to retain this property in their synthetic images, which causes a limited performance increase. To address this issue, we propose a novel zero-shot quantization method referred to as IntraQ. First, we propose a local object reinforcement that locates the target objects at different scales and positions of the synthetic images. Second, we introduce a marginal distance constraint to form class-related features distributed in a coarse area. Lastly, we devise a soft inception loss which injects a soft prior label to prevent the synthetic images from being overfitting to a fixed object. Our IntraQ is demonstrated to well retain the intra-class heterogeneity in the synthetic images and also observed to perform state-of-the-art. For example, compared to the advanced ZSQ, our IntraQ obtains 9.17\% increase of the top-1 accuracy on ImageNet when all layers of MobileNetV1 are quantized to 4-bit. Code is at https://github.com/zysxmu/IntraQ.

Yunshan Zhong, Mingbao Lin, Mengzhao Chen et al.

While post-training quantization receives popularity mostly due to its evasion in accessing the original complete training dataset, its poor performance also stems from scarce images. To alleviate this limitation, in this paper, we leverage the synthetic data introduced by zero-shot quantization with calibration dataset and propose a fine-grained data distribution alignment (FDDA) method to boost the performance of post-training quantization. The method is based on two important properties of batch normalization statistics (BNS) we observed in deep layers of the trained network, (i.e.), inter-class separation and intra-class incohesion. To preserve this fine-grained distribution information: 1) We calculate the per-class BNS of the calibration dataset as the BNS centers of each class and propose a BNS-centralized loss to force the synthetic data distributions of different classes to be close to their own centers. 2) We add Gaussian noise into the centers to imitate the incohesion and propose a BNS-distorted loss to force the synthetic data distribution of the same class to be close to the distorted centers. By utilizing these two fine-grained losses, our method manifests the state-of-the-art performance on ImageNet, especially when both the first and last layers are quantized to the low-bit. Code is at \url{https://github.com/zysxmu/FDDA}.

Yuxin Zhang, Mingbao Lin, Yunshan Zhong et al.

Network pruning is an effective approach to reduce network complexity with acceptable performance compromise. Existing studies achieve the sparsity of neural networks via time-consuming weight training or complex searching on networks with expanded width, which greatly limits the applications of network pruning. In this paper, we show that high-performing and sparse sub-networks without the involvement of weight training, termed "lottery jackpots", exist in pre-trained models with unexpanded width. Furthermore, we improve the efficiency for searching lottery jackpots from two perspectives. Firstly, we observe that the sparse masks derived from many existing pruning criteria have a high overlap with the searched mask of our lottery jackpot, among which, the magnitude-based pruning results in the most similar mask with ours. Consequently, our searched lottery jackpot removes 90% weights in ResNet-50, while it easily obtains more than 70% top-1 accuracy using only 5 searching epochs on ImageNet. In compliance with this insight, we initialize our sparse mask using the magnitude-based pruning, resulting in at least 3x cost reduction on the lottery jackpot searching while achieving comparable or even better performance. Secondly, we conduct an in-depth analysis of the searching process for lottery jackpots. Our theoretical result suggests that the decrease in training loss during weight searching can be disturbed by the dependency between weights in modern networks. To mitigate this, we propose a novel short restriction method to restrict change of masks that may have potential negative impacts on the training loss. Our code is available at https://github.com/zyxxmu/lottery-jackpots.

Lianjun Liu, Hongli An, Weiqi Yan et al.

The growing computational and memory demands of the Key-Value (KV) cache significantly limit the ability of Large Language Models (LLMs). While KV merging has emerged as a promising solution, existing methods that rely on empirical observations of KV asymmetry and gradient-based Hessian approximations lack a theoretical foundation and incur suboptimal compression and inference overhead. To bridge these gaps, we establish a theoretical framework that characterizes this asymmetry through the spectral energy distribution of projection weights, demonstrating that concentrated spectra in Query/Key weights induce feature homogeneity, whereas dispersed spectra in Value weights preserve heterogeneity. Then, we introduce KVSlimmer, an efficient algorithm that captures exact Hessian information through a mathematically exact formulation, and derives a closed-form solution utilizing only forward-pass variables, resulting in a gradient-free approach that is both memory- and time-efficient. Extensive experiments across various models and benchmarks demonstrate that KVSlimmer consistently outperforms SOTA methods. For instance, on Llama3.1-8B-Instruct, it improves the LongBench average score by 0.92 while reducing memory costs and latency by 29% and 28%, respectively.

Wenlun Zhang, Yunshan Zhong, Shimpei Ando et al.

The Segment Anything Model (SAM) has demonstrated strong versatility across various visual tasks. However, its large storage requirements and high computational cost pose challenges for practical deployment. Post-training quantization (PTQ) has emerged as an effective strategy for efficient deployment, but we identify two key challenges in SAM that hinder the effectiveness of existing PTQ methods: the heavy-tailed and skewed distribution of post-GELU activations, and significant inter-channel variation in linear projection activations. To address these challenges, we propose AHCPTQ, an accurate and hardware-efficient PTQ method for SAM. AHCPTQ introduces hardware-compatible Hybrid Log-Uniform Quantization (HLUQ) to manage post-GELU activations, employing log2 quantization for dense small values and uniform quantization for sparse large values to enhance quantization resolution. Additionally, AHCPTQ incorporates Channel-Aware Grouping (CAG) to mitigate inter-channel variation by progressively clustering activation channels with similar distributions, enabling them to share quantization parameters and improving hardware efficiency. The combination of HLUQ and CAG not only enhances quantization effectiveness but also ensures compatibility with efficient hardware execution. For instance, under the W4A4 configuration on the SAM-L model, AHCPTQ achieves 36.6% mAP on instance segmentation with the DINO detector, while achieving a 7.89x speedup and 8.64x energy efficiency over its floating-point counterpart in FPGA implementation.

Wenlun Zhang, Yunshan Zhong, Zihao Ding et al.

Data-Free Quantization (DFQ) offers a practical solution for model compression without requiring access to real data, making it particularly attractive in privacy-sensitive scenarios. While DFQ has shown promise for unimodal models, its extension to Vision-Language Models such as Contrastive Language-Image Pre-training (CLIP) models remains underexplored. In this work, we reveal that directly applying existing DFQ techniques to CLIP results in substantial performance degradation due to two key limitations: insufficient semantic content and low intra-image diversity in synthesized samples. To tackle these challenges, we propose D4C, the first DFQ framework tailored for CLIP. D4C synthesizes semantically rich and structurally diverse pseudo images through three key components: (1) Prompt-Guided Semantic Injection aligns generated images with real-world semantics using text prompts; (2) Structural Contrastive Generation reproduces compositional structures of natural images by leveraging foreground-background contrastive synthesis; and (3) Perturbation-Aware Enhancement applies controlled perturbations to improve sample diversity and robustness. These components jointly empower D4C to synthesize images that are both semantically informative and structurally diverse, effectively bridging the performance gap of DFQ on CLIP. Extensive experiments validate the effectiveness of D4C, showing significant performance improvements on various bit-widths and models. For example, under the W4A8 setting with CLIP ResNet-50 and ViT-B/32, D4C achieves Top-1 accuracy improvement of 12.4% and 18.9% on CIFAR-10, 6.8% and 19.7% on CIFAR-100, and 1.4% and 5.7% on ImageNet-1K in zero-shot classification, respectively.

Wenhao Li, Mingbao Lin, Yunshan Zhong et al.

Managing long texts is challenging for large language models (LLMs) due to limited context window sizes. This study introduces UIO-LLMs, an unbiased incremental optimization approach for memory-enhanced transformers under long-context settings. We initially conceptualize the process as a streamlined encoder-decoder framework where the weights-shared encoder and decoder respectively encapsulate a context segment into memories and leverage these memories to predict outputs of the subsequent segment. Subsequently, by treating our memory-enhanced transformers as fully-connected recurrent neural networks (RNNs), we refine the training process using the Truncated Backpropagation Through Time (TBPTT) algorithm, which incorporates innovative incremental optimization techniques. These techniques not only diminish time complexity but also address the bias in gradient computation through an unbiased optimization process. UIO-LLMs successfully handle long context, such as extending the context window of Llama2-7b-chat from 4K to 100K tokens with minimal 2% additional parameters, while keeping the inference cost nearly linear as context length increases.

Chuchu Han, Jiacheng Ye, Yunshan Zhong et al.

Person search aims at localizing and identifying a query person from a gallery of uncropped scene images. Different from person re-identification (re-ID), its performance also depends on the localization accuracy of a pedestrian detector. The state-of-the-art methods train the detector individually, and the detected bounding boxes may be sub-optimal for the following re-ID task. To alleviate this issue, we propose a re-ID driven localization refinement framework for providing the refined detection boxes for person search. Specifically, we develop a differentiable ROI transform layer to effectively transform the bounding boxes from the original images. Thus, the box coordinates can be supervised by the re-ID training other than the original detection task. With this supervision, the detector can generate more reliable bounding boxes, and the downstream re-ID model can produce more discriminative embeddings based on the refined person localizations. Extensive experimental results on the widely used benchmarks demonstrate that our proposed method performs favorably against the state-of-the-art person search methods.

Jian Wang, Yunshan Zhong, Yachun Li et al.

The estimation of 3D human body pose and shape from a single image has been extensively studied in recent years. However, the texture generation problem has not been fully discussed. In this paper, we propose an end-to-end learning strategy to generate textures of human bodies under the supervision of person re-identification. We render the synthetic images with textures extracted from the inputs and maximize the similarity between the rendered and input images by using the re-identification network as the perceptual metrics. Experiment results on pedestrian images show that our model can generate the texture from a single image and demonstrate that our textures are of higher quality than those generated by other available methods. Furthermore, we extend the application scope to other categories and explore the possible utilization of our generated textures.