Qizhi Guo

Junning Lyu, Qizhi Guo, Xia Ning et al.

LiDAR-inertial odometry (LIO) is a key component of autonomous navigation, but high-dynamic driving exposes two coupled challenges: intra-scan motion distortion and vibration-contaminated inertial measurements. Most real-time LiDAR-inertial pipelines propagate the system state by integrating raw IMU measurements and then use the propagated trajectory for point cloud de-distortion, thereby propagating inertial noise into both the corrected scan and the subsequent scan-to-map registration. This paper presents WNOJ-LIO, a LiDAR-IMU fusion framework based on a White-Noise-on-Jerk (WNOJ) Extended Kalman Filter (EKF). WNOJ-LIO employs a decoupled WNOJ prior on $\R^3 \times \SO(3)$ for state prediction and treats the IMU as a high-frequency measurement source rather than the driver of state propagation. The resulting posterior state history is then used for LiDAR scan de-distortion and subsequent point-to-plane LiDAR updates. The decoupled process model enables closed-form covariance propagation, thereby bridging the gap between batch WNOJ Gaussian process (GP) trajectory priors and recursive filtering. Simulation results demonstrate improvements in acceleration and angular-velocity denoising, scan de-distortion, and localization accuracy over a FAST-LIO-style baseline. Real-world experiments were conducted using an autonomous racing car on four driving segments with maximum speeds ranging from 53 to 208~km/h, covering a wide range of vehicle vibration levels. The experiments further validate the proposed method and provide a comprehensive evaluation of its performance in estimating acceleration, angular velocity, body-frame linear velocity, attitude, and position under highly dynamic driving. The source code of WNOJ-LIO is publicly available at https://github.com/LvJohny/wnoj-ekf-lio.git.

Siyuan Yang, Zikai Jia, Hailiang Kuang et al.

Global navigation satellite system (GNSS) denial can prevent an unmanned surface vehicle (USV) from both finding a distant vessel and maintaining a globally referenced approach. This paper presents AUSLUN (Automatic UAV Search, Localization, and USV Navigation), a fixed-hover aerial-surface system that uses a coastal unmanned aerial vehicle (UAV), which estimates its own pose through visual-inertial odometry (VIO), as a long-range sensing and navigation anchor. The central design shifts sensing motion from UAV translation to a zoom pod and closes the loop through three coupled elements: polygon-aware annular pod scanning, modality-aware bearing-range localization, and target-relative USV guidance with visual-loss recovery. The same gated recursive estimator uses laser range for the non-cooperative target and datalink range for the cooperative USV. Search-planning simulations show that the adaptive yaw bounds reduce scan time and redundant coverage relative to a matched fixed-sector scan, and GPS-referenced field data show that the gated recursive estimator outperforms non-recursive baselines in localization accuracy. An integrated maritime mission further demonstrates the complete search-to-navigation sequence, including a deliberately triggered visual-loss recovery. These results establish the feasibility and operating boundary of fixed-hover UAV assistance for stationary-target approach in coastal GNSS-denied environments. The source code and a video demonstration are publicly available at https://github.com/xirhxq/pod_search and https://youtu.be/S-5RkJs35JI.