Ravi Prakash

Devi Yuliarti, Ravi Prakash, Hiu Ching Cheung et al.

The tactile properties of tissue, such as elasticity and stiffness, often play an important role in surgical oncology when identifying tumors and pathological tissue boundaries. Though extremely valuable, robot-assisted surgery comes at the cost of reduced sensory information to the surgeon, with vision being the primary. Sensors proposed to overcome this sensory desert are often bulky, complex, and incompatible with the surgical workflow. We present PalpAid, a multimodal pneumatic tactile sensor to restore touch in robot-assisted surgery. PalpAid is equipped with a microphone and pressure sensor, converting contact force into an internal pressure differential. The pressure sensor acts as an event detector, while the acoustic signature assists in tissue identification. We show the design, fabrication, and assembly of sensory units with characterization tests for robustness to use, repetition cycles, and integration with a robotic system. Finally, we demonstrate the sensor's ability to classify 3D-printed hard objects with varying infills and soft ex vivo tissues. We envision PalpAid to be easily retrofitted with existing surgical/general robotic systems, allowing soft tissue palpation.

Mumuksh Tayal, Manan Tayal, Aditya Singh et al.

Ensuring safety in autonomous systems requires controllers that satisfy hard, state-wise constraints without relying on online interaction. While existing Safe Offline RL methods typically enforce soft expected-cost constraints, they do not guarantee forward invariance. Conversely, Control Barrier Functions (CBFs) provide rigorous safety guarantees but usually depend on expert-designed barrier functions or full knowledge of the system dynamics. We introduce Value-Guided Offline Control Barrier Functions (V-OCBF), a framework that learns a neural CBF entirely from offline demonstrations. Unlike prior approaches, V-OCBF does not assume access to the dynamics model; instead, it derives a recursive finite-difference barrier update, enabling model-free learning of a barrier that propagates safety information over time. Moreover, V-OCBF incorporates an expectile-based objective that avoids querying the barrier on out-of-distribution actions and restricts updates to the dataset-supported action set. The learned barrier is then used with a Quadratic Program (QP) formulation to synthesize real-time safe control. Across multiple case studies, V-OCBF yields substantially fewer safety violations than baseline methods while maintaining strong task performance, highlighting its scalability for offline synthesis of safety-critical controllers without online interaction or hand-engineered barriers.

Ravi Prakash, Vincent Y. Wang, Arpit Mishra et al.

Robotic laser systems offer the potential for sub-millimeter, non-contact, high-precision tissue resection, yet existing platforms lack volumetric planning and intraoperative feedback. We present RATS (Robot-Assisted Tissue Surgery), an intelligent opto-mechanical, optical coherence tomography (OCT)-guided robotic platform designed for autonomous volumetric soft tissue resection in surgical applications. RATS integrates macro-scale RGB-D imaging, micro-scale OCT, and a fiber-coupled surgical laser, calibrated through a novel multistage alignment pipeline that achieves OCT-to-laser calibration accuracy of 0.161+-0.031mm on tissue phantoms and ex vivo porcine tissue. A super-Gaussian laser-tissue interaction (LTI) model characterizes ablation crater morphology with an average RMSE of 0.231+-0.121mm, outperforming Gaussian baselines. A sampling-based model predictive control (MPC) framework operates directly on OCT voxel data to generate constraint-aware resection trajectories with closed-loop feedback, achieving 0.842mm RMSE and improving intersection-over-union agreement by 64.8% compared to feedforward execution. With OCT, RATS detects subsurface structures and modifies the planner's objective to preserve them, demonstrating clinical feasibility.

Nghia Vu, Tuong Do, Khang Nguyen et al.

Affordance learning is a complex challenge in many applications, where existing approaches primarily focus on the geometric structures, visual knowledge, and affordance labels of objects to determine interactable regions. However, extending this learning capability to a scene is significantly more complicated, as incorporating object- and scene-level semantics is not straightforward. In this work, we introduce AffordBridge, a large-scale dataset with 291,637 functional interaction annotations across 685 high-resolution indoor scenes in the form of point clouds. Our affordance annotations are complemented by RGB images that are linked to the same instances within the scenes. Building upon our dataset, we propose AffordMatcher, an affordance learning method that establishes coherent semantic correspondences between image-based and point cloud-based instances for keypoint matching, enabling a more precise identification of affordance regions based on cues, so-called visual signifiers. Experimental results on our dataset demonstrate the effectiveness of our approach compared to other methods.

Mumuksh Tayal, Manan Tayal, Ravi Prakash

Offline safe reinforcement learning (RL) seeks reward-maximizing policies from static datasets under strict safety constraints. Existing methods often rely on soft expected-cost objectives or iterative generative inference, which can be insufficient for safety-critical real-time control. We propose Safe Flow Q-Learning (SafeFQL), which extends FQL to safe offline RL by combining a Hamilton--Jacobi reachability-inspired safety value function with an efficient one-step flow policy. SafeFQL learns the safety value via a self-consistency Bellman recursion, trains a flow policy by behavioral cloning, and distills it into a one-step actor for reward-maximizing safe action selection without rejection sampling at deployment. To account for finite-data approximation error in the learned safety boundary, we add a conformal prediction calibration step that adjusts the safety threshold and provides finite-sample probabilistic safety coverage. Empirically, SafeFQL trades modestly higher offline training cost for substantially lower inference latency than diffusion-style safe generative baselines, which is advantageous for real-time safety-critical deployment. Across boat navigation, and Safety Gymnasium MuJoCo tasks, SafeFQL matches or exceeds prior offline safe RL performance while substantially reducing constraint violations.

Ravi Prakash, Sinnu Susan Thomas

This paper introduces a novel fingerprint classification technique based on a multi-layered fuzzy logic classifier. We target the cause of missed detection by identifying the fingerprints at an early stage among dry, standard, and wet. Scanned images are classified based on clarity correlated with the proposed feature points. We also propose a novel adaptive algorithm based on eigenvector space for generating new samples to overcome the multiclass imbalance. Proposed methods improve the performance of ensemble learners. It was also found that the new approach performs better than the neural-network based classification methods. Early-stage improvements give a suitable dataset for fingerprint detection models. Leveraging the novel classifier, the best set of `standard' labelled fingerprints is used to generate a unique hybrid fingerprint orientation map (HFOM). We introduce a novel min-rotate max-flow optimization method inspired by the min-cut max-flow algorithm. The unique properties of HFOM generation introduce a new use case for biometric data protection by using HFOM as a virtual proxy of fingerprints.

Mumuksh Tayal, Manan Tayal, Ravi Prakash

Ensuring safety in robotic systems remains a fundamental challenge, especially when deploying offline policy-learning methods such as imitation learning in dynamic environments. Traditional behavior cloning (BC) often fails to generalize when deployed without fine-tuning as it does not account for disturbances in observations that arises in real-world, changing environments. To address this limitation, we propose RISE (Robust Imitation through Stochastic Encodings), a novel imitation-learning framework that explicitly addresses erroneous measurements of environment parameters into policy learning via a variational latent representation. Our framework encodes parameters such as obstacle state, orientation, and velocity into a smooth variational latent space to improve test time generalization. This enables an offline-trained policy to produce actions that are more robust to perceptual noise and environment uncertainty. We validate our approach on two robotic platforms, an autonomous ground vehicle and a Franka Emika Panda manipulator and demonstrate improved safety robustness while maintaining goal-reaching performance compared to baseline methods.

Ravi Prakash, Tony Thomas

The rise of the industrial metaverse has brought digital twins (DTs) to the forefront. Blockchain-powered non-fungible tokens (NFTs) offer a decentralized approach to creating and owning these cloneable DTs. However, the potential for unauthorized duplication, or counterfeiting, poses a significant threat to the security of NFT-DTs. Existing NFT clone detection methods often rely on static information like metadata and images, which can be easily manipulated. To address these limitations, we propose a novel deep-learning-based solution as a combination of an autoencoder and RNN-based classifier. This solution enables real-time pattern recognition to detect fake NFT-DTs. Additionally, we introduce the concept of dynamic metadata, providing a more reliable way to verify authenticity through AI-integrated smart contracts. By effectively identifying counterfeit DTs, our system contributes to strengthening the security of NFT-based assets in the metaverse.

Soumyodipta Nath, Pranav Tiwari, Ravi Prakash

Robots operating in human-centric environments must be both robust to disturbances and provably safe from collisions. Achieving these properties simultaneously and efficiently remains a central challenge. While Dynamic Movement Primitives (DMPs) offer inherent stability and generalization from single demonstrations, they lack formal safety guarantees. Conversely, formal methods like Control Barrier Functions (CBFs) provide provable safety but often rely on computationally expensive, real-time optimization, hindering their use in high-frequency control. This paper introduces SafeDMPs, a novel framework that resolves this trade-off. We integrate the closed-form efficiency and dynamic robustness of DMPs with a provably safe, non-optimization-based control law derived from Spatio-Temporal Tubes (STTs). This synergy allows us to generate motions that are not only robust to perturbations and adaptable to new goals, but also guaranteed to avoid static and dynamic obstacles. Our approach achieves a closed-form solution for a problem that traditionally requires online optimization. Experimental results on a 7-DOF robot manipulator demonstrate that SafeDMPs is orders of magnitude faster and more accurate than optimization-based baselines, making it an ideal solution for real-time, safe, and collaborative robotics.

Anurag Maurya, Tashmoy Ghosh, Ravi Prakash

Adapting robot trajectories based on human instructions as per new situations is essential for achieving more intuitive and scalable human-robot interactions. This work proposes a flexible language-based framework to adapt generic robotic trajectories produced by off-the-shelf motion planners like RRT, A-star, etc, or learned from human demonstrations. We utilize pre-trained LLMs to adapt trajectory waypoints by generating code as a policy for dense robot manipulation, enabling more complex and flexible instructions than current methods. This approach allows us to incorporate a broader range of commands, including numerical inputs. Compared to state-of-the-art feature-based sequence-to-sequence models which require training, our method does not require task-specific training and offers greater interpretability and more effective feedback mechanisms. We validate our approach through simulation experiments on the robotic manipulator, aerial vehicle, and ground robot in the Pybullet and Gazebo simulation environments, demonstrating that LLMs can successfully adapt trajectories to complex human instructions.

Mohit Vohra, Ashish Kumar, Ravi Prakash et al.

In this work, we present a robotic solution to automate the task of wall construction. To that end, we present an end-to-end visual perception framework that can quickly detect and localize bricks in a clutter. Further, we present a light computational method of brick pose estimation that incorporates the above information. The proposed detection network predicts a rotated box compared to YOLO and SSD, thereby maximizing the object's region in the predicted box regions. In addition, precision P, recall R, and mean-average-precision (mAP) scores are reported to evaluate the proposed framework. We observed that for our task, the proposed scheme outperforms the upright bounding box detectors. Further, we deploy the proposed visual perception framework on a robotic system endowed with a UR5 robot manipulator and demonstrate that the system can successfully replicate a simplified version of the wall-building task in an autonomous mode.

Mohit Vohra, Ravi Prakash, Laxmidhar Behera

In this paper, we propose a novel edge and corner detection algorithm for an unorganized point cloud. Our edge detection method classifies a query point as an edge point by evaluating the distribution of local neighboring points around the query point. The proposed technique has been tested on generic items such as dragons, bunnies, and coffee cups from the Stanford 3D scanning repository. The proposed technique can be directly applied to real and unprocessed point cloud data of random clutter of objects. To demonstrate the proposed technique's efficacy, we compare it to the other solutions for 3D edge extractions in an unorganized point cloud data. We observed that the proposed method could handle the raw and noisy data with little variations in parameters compared to other methods. We also extend the algorithm to estimate the 6D pose of known objects in the presence of dense clutter while handling multiple instances of the object. The overall approach is tested for a warehouse application, where an actual UR5 robot manipulator is used for robotic pick and place operations in an autonomous mode.

Ashish Kumar, Mohit Vohra, Ravi Prakash et al.

In this work, we present a pragmatic approach to enable unmanned aerial vehicle (UAVs) to autonomously perform highly complicated tasks of object pick and place. This paper is largely inspired by challenge-2 of MBZIRC 2020 and is primarily focused on the task of assembling large 3D structures in outdoors and GPS-denied environments. Primary contributions of this system are: (i) a novel computationally efficient deep learning based unified multi-task visual perception system for target localization, part segmentation, and tracking, (ii) a novel deep learning based grasp state estimation, (iii) a retracting electromagnetic gripper design, (iv) a remote computing approach which exploits state-of-the-art MIMO based high speed (5000Mb/s) wireless links to allow the UAVs to execute compute intensive tasks on remote high end compute servers, and (v) system integration in which several system components are weaved together in order to develop an optimized software stack. We use DJI Matrice-600 Pro, a hex-rotor UAV and interface it with the custom designed gripper. Our framework is deployed on the specified UAV in order to report the performance analysis of the individual modules. Apart from the manipulation system, we also highlight several hidden challenges associated with the UAVs in this context.

Mohit Vohra, Ravi Prakash, Laxmidhar Behera

Grasping of novel objects in pick and place applications is a fundamental and challenging problem in robotics, specifically for complex-shaped objects. It is observed that the well-known strategies like \textit{i}) grasping from the centroid of object and \textit{ii}) grasping along the major axis of the object often fails for complex-shaped objects. In this paper, a real-time grasp pose estimation strategy for novel objects in robotic pick and place applications is proposed. The proposed technique estimates the object contour in the point cloud and predicts the grasp pose along with the object skeleton in the image plane. The technique is tested for the objects like ball container, hand weight, tennis ball and even for complex shape objects like blower (non-convex shape). It is observed that the proposed strategy performs very well for complex shaped objects and predicts the valid grasp configurations in comparison with the above strategies. The experimental validation of the proposed grasping technique is tested in two scenarios, when the objects are placed distinctly and when the objects are placed in dense clutter. A grasp accuracy of 88.16\% and 77.03\% respectively are reported. All the experiments are performed with a real UR10 robot manipulator along with WSG-50 two-finger gripper for grasping of objects.

Afshin Taghavi Nasrabadi, Aliehsan Samiei, Anahita Mahzari et al.

In this paper, we propose a taxonomy for 360° videos that categorizes videos based on moving objects and camera motion. We gathered and produced 28 videos based on the taxonomy, and recorded viewport traces from 60 participants watching the videos. In addition to the viewport traces, we provide the viewers' feedback on their experience watching the videos, and we also analyze viewport patterns on each category.

B H Priyanka, Ravi Prakash

Over the last two decades, the scale and complexity of the Internet and its associated technologies built on the World Wide Web has grown exponentially with access to Internet as a facility occupying a prime place with other amenities of modern lives. In years to come, usage of Internet may unravel more pleasant surprises for us as far as novelty in its usage is concerned. As a democratic function of Internet, and relying on the open model on which it has been built, there has been concerted efforts in the direction of privacy protection and use of privacy enhancing tools which have gained tangible traction. Innovation in use of VPN, TLS/SSL and cryptographic tools are a testimony to it. Another popular tool is Tor, which has gained widespread popularity as it is being increasingly used by anonymity seeking users to effectively maintain their discretion while surfing the web. However, there is a darker side to increased proliferation of Internet in our everyday routine. We are certainly not living in a utopian age and there are potentials of misuse of Internet as well. Across every nook and cranny of Internet's sprawling virtual world, there are cyber criminals lurking n dangerous alleys to use the very same Internet as malevolent tool to abuse it and cause financial, physical and social harm to ordinary people. Failing to manage the widespread spawning of World Wide Web has rendered it weak against misuse. In last few decades especially, Internet has been inundated with malware, ransomware, viruses, Trojans, illegal spy tools and what not created with malignant sentiments. In this paper, we will analyze few of the subverting privacy infrastructures.