Upinder Kaur

Yuelin Deng, Hinayah Rojas de Oliveira, Richard M. Voyles et al.

Enteric methane measurement from ruminant livestock faces fundamental trade-offs between accuracy and operational feasibility. Existing methods quantify methane after eructation and atmospheric dilution, limiting temporal resolution and confounding biological signals with environmental variables. We present SCOUT (Smart Cannula-mounted Optical Unit for Trace-methane), the first autonomous system for continuous in-vivo monitoring of ruminal headspace methane concentrations. The system addresses a critical engineering barrier through closed-loop gas recirculation that maintains anaerobic ruminal conditions during persistent headspace sampling. SCOUT was deployed on cannulated Simmental heifers under contrasting dietary treatments. Headspace concentrations were 100 to 1000 times higher than concurrent ambient sniffer readings, providing substantially greater signal resolution for characterizing methane dynamics. High-frequency monitoring revealed behavior-production coupling previously inaccessible, including rapid concentration changes ($14.5 \pm 11.3k$ ppm) associated with postural transitions within 15-minute intervals. Cross-platform comparison with ambient sniffers showed scale-dependent correspondence between production and release measurements, with an optimal correlation (r = -0.564) at 40-minute averaging windows consistent with eructation cycles. These results demonstrate that the rumen headspace contains continuous, biologically interpretable methane signals that SCOUT can reliably access, establishing the measurement infrastructure necessary for developing concentration-to-flux models that would support precision phenotyping, emission proxy calibration, and mitigation strategy evaluation.

Ian Noronha, Advait Prasad Jawaji, Juan Camilo Soto et al.

Animal-robot interaction (ARI) remains an unexplored challenge in robotics, as robots struggle to interpret the complex, multimodal communication cues of animals, such as body language, movement, and vocalizations. Unlike human-robot interaction, which benefits from established datasets and frameworks, animal-robot interaction lacks the foundational resources needed to facilitate meaningful bidirectional communication. To bridge this gap, we present the MBE-ARI (Multimodal Bidirectional Engagement in Animal-Robot Interaction), a novel multimodal dataset that captures detailed interactions between a legged robot and cows. The dataset includes synchronized RGB-D streams from multiple viewpoints, annotated with body pose and activity labels across interaction phases, offering an unprecedented level of detail for ARI research. Additionally, we introduce a full-body pose estimation model tailored for quadruped animals, capable of tracking 39 keypoints with a mean average precision (mAP) of 92.7%, outperforming existing benchmarks in animal pose estimation. The MBE-ARI dataset and our pose estimation framework lay a robust foundation for advancing research in animal-robot interaction, providing essential tools for developing perception, reasoning, and interaction frameworks needed for effective collaboration between robots and animals. The dataset and resources are publicly available at https://github.com/RISELabPurdue/MBE-ARI/, inviting further exploration and development in this critical area.

Zihan Oliver Zeng, David Marshall Porterfield, Upinder Kaur

Multimodal environmental monitoring conventionally requires a suite of purpose-built transducers, each constrained to a predefined target. Here, we present MIND (Mycoponically Integrated Network Device), a platform that sustains living fungal mycelial networks on porous bioceramic substrates and reads their passive extracellular voltages. Without hardware modification, a single device produces distinguishable bioelectrical responses to 14 stimuli spanning chemical, optical, mechanical, thermal, and biological domains. We show that steady-state intensity responses follow Hill-type calibration functions conserved across five phylogenetically diverse fungal species, and that multichannel decoding recovers stimulus duration, spatial origin, and continuous position from the bioelectrical output. Strain selection tunes sensitivity without hardware redesign. The platform restores full electrophysiological function within 72 h of mechanical damage and has maintained calibration-quality readout for more than 11 months of continuous operation. These results position fungal electrophysiology as a measurement platform for sensing applications in which the full stimulus set, the electrode geometry, and the recovery requirements cannot be fully specified in advance.

Juan Camilo Soto, Ian Noronha, Saru Bharti et al.

Event cameras promise low latency and high dynamic range, yet their sparse output challenges integration into standard robotic pipelines. We introduce \nameframew (Efficient Event Camera Volume System), a novel framework that models event streams as continuous-time Dirac impulse trains, enabling artifact-free compression through direct transform evaluation at event timestamps. Our key innovation combines density-driven adaptive selection among DCT, DTFT, and DWT transforms with transform-specific coefficient pruning strategies tailored to each domain's sparsity characteristics. The framework eliminates temporal binning artifacts while automatically adapting compression strategies based on real-time event density analysis. On EHPT-XC and MVSEC datasets, our framework achieves superior reconstruction fidelity with DTFT delivering the lowest earth mover distance. In downstream segmentation tasks, EECVS demonstrates robust generalization. Notably, our approach demonstrates exceptional cross-dataset generalization: when evaluated with EventSAM segmentation, EECVS achieves mean IoU 0.87 on MVSEC versus 0.44 for voxel grids at 24 channels, while remaining competitive on EHPT-XC. Our ROS2 implementation provides real-time deployment with DCT processing achieving 1.5 ms latency and 2.7X higher throughput than alternative transforms, establishing the first adaptive event compression framework that maintains both computational efficiency and superior generalization across diverse robotic scenarios.

Zihan Oliver Zeng, Jiajun An, Preston Luk et al.

Soft robots are compliant but often cannot support loads or hold their shape, while rigid robots provide structural strength but are less adaptable. Existing variable-stiffness systems usually operate at the scale of whole segments or patches, which limits precise control over stiffness distribution and virtual joint placement. This paper presents the Variable Stiffness Lattice Skin (VSL-Skin), the first system to enable individually addressable voxel-level morphological control with centimeter-scale precision. The system provides three main capabilities: nearly two orders of magnitude stiffness modulation across axial (15-1200 N/mm), shear (45-850 N/mm), bending (8*10^2 - 3*10^4 N/deg), and torsional modes with centimeter-scale spatial control; the first demonstrated 30% axial compression in phase-change systems while maintaining structural integrity; and autonomous component-level self-repair through thermal cycling, which eliminates fatigue accumulation and enables programmable sacrificial joints for predictable failure management. Selective voxel activation creates six canonical virtual joint types with programmable compliance while preserving structural integrity in non-activated regions. The platform incorporates closed-form design models and finite element analysis for predictive synthesis of stiffness patterns and joint placement. Experimental validation demonstrates 30% axial contraction, thermal switching in 75-second cycles, and cut-to-fit integration that preserves addressability after trimming. The row-column architecture enables platform-agnostic deployment across diverse robotic systems without specialized infrastructure. This framework establishes morphological intelligence as an engineerable system property and advances autonomous reconfigurable robotics.

Upinder Kaur, Haozhe Zhou, Xiaxin Shen et al.

Robot systems are increasingly integrating into numerous avenues of modern life. From cleaning houses to providing guidance and emotional support, robots now work directly with humans. Due to their far-reaching applications and progressively complex architecture, they are being targeted by adversarial attacks such as sensor-actuator attacks, data spoofing, malware, and network intrusion. Therefore, security for robotic systems has become crucial. In this paper, we address the underserved area of malware detection in robotic software. Since robots work in close proximity to humans, often with direct interactions, malware could have life-threatening impacts. Hence, we propose the RoboMal framework of static malware detection on binary executables to detect malware before it gets a chance to execute. Additionally, we address the great paucity of data in this space by providing the RoboMal dataset comprising controller executables of a small-scale autonomous car. The performance of the framework is compared against widely used supervised learning models: GRU, CNN, and ANN. Notably, the LSTM-based RoboMal model outperforms the other models with an accuracy of 85% and precision of 87% in 10-fold cross-validation, hence proving the effectiveness of the proposed framework.

Mythra V. Balakuntala, Upinder Kaur, Xin Ma et al.

Everyday contact-rich tasks, such as peeling, cleaning, and writing, demand multimodal perception for effective and precise task execution. However, these present a novel challenge to robots as they lack the ability to combine these multimodal stimuli for performing contact-rich tasks. Learning-based methods have attempted to model multi-modal contact-rich tasks, but they often require extensive training examples and task-specific reward functions which limits their practicality and scope. Hence, we propose a generalizable model-free learning-from-demonstration framework for robots to learn contact-rich skills without explicit reward engineering. We present a novel multi-modal sensor data representation which improves the learning performance for contact-rich skills. We performed training and experiments using the real-life Sawyer robot for three everyday contact-rich skills -- cleaning, writing, and peeling. Notably, the framework achieves a success rate of 100\% for the peeling and writing skill, and 80\% for the cleaning skill. Hence, this skill learning framework can be extended for learning other physical manipulation skills.

Upinder Kaur, Praveen Abbaraju, Harrison McCarty et al.

Construction spaces are constantly evolving, dynamic environments in need of continuous surveying, inspection, and assessment. Traditional manual inspection of such spaces proves to be an arduous and time-consuming activity. Automation using robotic agents can be an effective solution. Robots, with perception capabilities can autonomously classify and survey indoor construction spaces. In this paper, we present a novel identification-on-the-fly approach for coarse classification of indoor spaces using the unique signature of clutter. Using the context granted by clutter, we recognize common indoor spaces such as corridors, staircases, shared spaces, and restrooms. The proposed clutter slices pipeline achieves a maximum accuracy of 93.6% on the presented clutter slices dataset. This sensor independent approach can be generalized to various domains to equip intelligent autonomous agents in better perceiving their environment.

Glebys T. Gonzalez, Upinder Kaur, Masudur Rahma et al.

Short response time is critical for future military medical operations in austere settings or remote areas. Such effective patient care at the point of injury can greatly benefit from the integration of semi-autonomous robotic systems. To achieve autonomy, robots would require massive libraries of maneuvers. While this is possible in controlled settings, obtaining surgical data in austere settings can be difficult. Hence, in this paper, we present the Dexterous Surgical Skill (DESK) database for knowledge transfer between robots. The peg transfer task was selected as it is one of 6 main tasks of laparoscopic training. Also, we provide a ML framework to evaluate novel transfer learning methodologies on this database. The collected DESK dataset comprises a set of surgical robotic skills using the four robotic platforms: Taurus II, simulated Taurus II, YuMi, and the da Vinci Research Kit. Then, we explored two different learning scenarios: no-transfer and domain-transfer. In the no-transfer scenario, the training and testing data were obtained from the same domain; whereas in the domain-transfer scenario, the training data is a blend of simulated and real robot data that is tested on a real robot. Using simulation data enhances the performance of the real robot where limited or no real data is available. The transfer model showed an accuracy of 81% for the YuMi robot when the ratio of real-to-simulated data was 22%-78%. For Taurus II and da Vinci robots, the model showed an accuracy of 97.5% and 93% respectively, training only with simulation data. Results indicate that simulation can be used to augment training data to enhance the performance of models in real scenarios. This shows the potential for future use of surgical data from the operating room in deployable surgical robots in remote areas.