Wolfgang Reif

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

With the recent advance in speech technology, smart voice assistants have been improved and are now used by many people. But often these assistants are running online as a cloud service and are not always known for a good protection of users' privacy. This paper presents the architecture of a novel voice assistant, called Jaco, with the following features: (a) It can run completely offline, even on low resource devices like a RaspberryPi. (b) Through a skill concept it can be easily extended. (c) The architectural focus is on protecting users' privacy, but without restricting capabilities for developers. (d) It supports multiple languages. (e) It is competitive with other voice assistant solutions. In this respect the assistant combines and extends the advantages of other approaches.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

In Spoken Language Understanding (SLU) the task is to extract important information from audio commands, like the intent of what a user wants the system to do and special entities like locations or numbers. This paper presents a simple method for embedding intents and entities into Finite State Transducers, and, in combination with a pretrained general-purpose Speech-to-Text model, allows building SLU-models without any additional training. Building those models is very fast and only takes a few seconds. It is also completely language independent. With a comparison on different benchmarks it is shown that this method can outperform multiple other, more resource demanding SLU approaches.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

Human action recognition plays an important role when developing intelligent interactions between humans and machines. While there is a lot of active research on improving the machine learning algorithms for skeleton-based action recognition, not much attention has been given to the quality of the input skeleton data itself. This work demonstrates that by making use of multiple camera views to triangulate more accurate 3D~skeletons, the performance of state-of-the-art action recognition models can be improved significantly. This suggests that the quality of the input data is currently a limiting factor for the performance of these models. Based on these results, it is argued that the cost-benefit ratio of using multiple cameras is very favorable in most practical use-cases, therefore future research in skeleton-based action recognition should consider multi-view applications as the standard setup.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

The integration of multi-view imaging and pose estimation represents a significant advance in computer vision applications, offering new possibilities for understanding human movement and interactions. This work presents a new algorithm that improves multi-view multi-person pose estimation, focusing on fast triangulation speeds and good generalization capabilities. The approach extends to whole-body pose estimation, capturing details from facial expressions to finger movements across multiple individuals and viewpoints. Adaptability to different settings is demonstrated through strong performance across unseen datasets and configurations. To support further progress in this field, all of this work is publicly accessible.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

In the rapidly evolving field of computer vision, the task of accurately estimating the poses of multiple individuals from various viewpoints presents a formidable challenge, especially if the estimations should be reliable as well. This work presents an extensive evaluation of the generalization capabilities of multi-view multi-person pose estimators to unseen datasets and presents a new algorithm with strong performance in this task. It also studies the improvements by additionally using depth information. Since the new approach can not only generalize well to unseen datasets, but also to different keypoints, the first multi-view multi-person whole-body estimator is presented. To support further research on those topics, all of the work is publicly accessible.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

In the rapidly advancing domain of computer vision, accurately estimating the poses of multiple individuals from various viewpoints remains a significant challenge, especially when reliability is a key requirement. This paper introduces a novel algorithm that excels in multi-view, multi-person pose estimation by incorporating depth information. An extensive evaluation demonstrates that the proposed algorithm not only generalizes well to unseen datasets, and shows a fast runtime performance, but also is adaptable to different keypoints. To support further research, all of the work is publicly accessible.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

Human pose forecasting predicts future poses based on past observations, and has many significant applications in areas such as action recognition, autonomous driving or human-robot interaction. This paper evaluates a wide range of pose forecasting algorithms in the task of absolute pose forecasting, revealing many reproducibility issues, and provides a unified training and evaluation pipeline. After drawing a high-level analogy to the task of speech understanding, it is shown that recent speech models can be efficiently adapted to the task of pose forecasting, and improve current state-of-the-art performance. At last the robustness of the models is evaluated, using noisy joint coordinates obtained from a pose estimator model, to reflect a realistic type of noise, which is more close to real-world applications. For this a new dataset variation is introduced, and it is shown that estimated poses result in a substantial performance degradation, and how much of it can be recovered again by unsupervised finetuning.

Dominik Müller, Niklas Schröter, Silvan Mertes et al.

COVID-19 presence classification and severity prediction via (3D) thorax computed tomography scans have become important tasks in recent times. Especially for capacity planning of intensive care units, predicting the future severity of a COVID-19 patient is crucial. The presented approach follows state-of-theart techniques to aid medical professionals in these situations. It comprises an ensemble learning strategy via 5-fold cross-validation that includes transfer learning and combines pre-trained 3D-versions of ResNet34 and DenseNet121 for COVID19 classification and severity prediction respectively. Further, domain-specific preprocessing was applied to optimize model performance. In addition, medical information like the infection-lung-ratio, patient age, and sex were included. The presented model achieves an AUC of 79.0% to predict COVID-19 severity, and 83.7% AUC to classify the presence of an infection, which is comparable with other currently popular methods. This approach is implemented using the AUCMEDI framework and relies on well-known network architectures to ensure robustness and reproducibility.

Daniel Bermuth, Alexander Poeppel, Wolfgang Reif

Recent Speech-to-Text models often require a large amount of hardware resources and are mostly trained in English. This paper presents Speech-to-Text models for German, as well as for Spanish and French with special features: (a) They are small and run in real-time on microcontrollers like a RaspberryPi. (b) Using a pretrained English model, they can be trained on consumer-grade hardware with a relatively small dataset. (c) The models are competitive with other solutions and outperform them in German. In this respect, the models combine advantages of other approaches, which only include a subset of the presented features. Furthermore, the paper provides a new library for handling datasets, which is focused on easy extension with additional datasets and shows an optimized way for transfer-learning new languages using a pretrained model from another language with a similar alphabet.

Michael Filipenko, Andreas Angerer, Alwin Hoffmann et al.

This paper introduces two case studies combining the field of industrial robotics with Mixed Reality (MR). The goal of those case studies is to get a better understanding of how MR can be useful and what are the limitations. The first case study describes an approach to visualize the digital twin of a robot arm. The second case study aims at facilitating the commissioning of industrial robots. Furthermore, this paper reports the experiences gained by implementing those two scenarios and discusses the limitations.

Benedikt Eberhardinger, Gerrit Anders, Hella Seebach et al.

We provide a systematic approach for testing self-organization (SO) algorithms. The main challenges for such a testing domain are the strongly ramified state space, the possible error masking, the interleaving of mechanisms, and the oracle problem resulting from the main characteristics of SO algorithms: their inherent non-deterministic behavior on the one hand, and their dynamic environment on the other. A key to success for our SO algorithm testing framework is automation, since it is rarely possible to cope with the ramified state space manually. The test automation is based on a model-based testing approach where probabilistic environment profiles are used to derive test cases that are performed and evaluated on isolated SO algorithms. Besides isolation, we are able to achieve representative test results with respect to a specific application. For illustration purposes, we apply the concepts of our framework to partitioning-based SO algorithms and provide an evaluation in the context of an existing smart-grid application.

Andreas Angerer, Remi Smirra, Alwin Hoffmann et al.

Industrial robotics is characterized by sophisticated mechanical components and highly-developed real-time control algorithms. However, the efficient use of robotic systems is very much limited by existing proprietary programming methods. In the research project SoftRobot, a software architecture was developed that enables the programming of complex real-time critical robot tasks with an object-oriented general purpose language. On top of this architecture, a graphical language was developed to ease the specification of complex robot commands, which can then be used as part of robot application workflows. This paper gives an overview about the design and implementation of this graphical language and illustrates its usefulness with some examples.