Michael J. Mueterthies

Anirudh Tunga, Jordan Heim, Michael Mueterthies et al.

Accurately capturing the three dimensional power distribution within a reactor core is vital for ensuring the safe and economical operation of the reactor, compliance with Technical Specifications, and fuel cycle planning (safety, control, and performance evaluation). Offline (that is, during cycle planning and core design), a three dimensional neutronics simulator is used to estimate the reactor's power, moderator, void, and flow distributions, from which margin to thermal limits and fuel exposures can be approximated. Online, this is accomplished with a system of local power range monitors (LPRMs) designed to capture enough neutron flux information to infer the full nodal power distribution. Certain problems with this process, ranging from measurement and calibration to the power adaption process, pose challenges to operators and limit the ability to design reload cores economically (e.g., engineering in insufficient margin or more margin than required). Artificial intelligence (AI) and machine learning (ML) are being used to solve the problems to reduce maintenance costs, improve the accuracy of online local power measurements, and decrease the bias between offline and online power distributions, thereby leading to a greater ability to design safe and economical reload cores. We present ML models trained from two deep neural network (DNN) architectures, SurrogateNet and LPRMNet, that demonstrate a testing error of 1 percent and 3 percent, respectively. Applications of these models can include virtual sensing capability for bypassed or malfunctioning LPRMs, on demand virtual calibration of detectors between successive calibrations, highly accurate nuclear end of life determinations for LPRMs, and reduced bias between measured and predicted power distributions within the core.

Anirudh Tunga, Michael J. Mueterthies, Jonathan Nistor

Nuclear power plant operators face significant challenges due to unpredictable deviations between offline and online thermal limits, a phenomenon known as thermal limit bias, which leads to conservative design margins, increased fuel costs, and operational inefficiencies. This work presents a deep learning based methodology to predict and correct this bias for Boiling Water Reactors (BWRs), focusing on the Maximum Fraction of Limiting Power Density (MFLPD) metric used to track the Linear Heat Generation Rate (LHGR) limit. The proposed model employs a fully convolutional encoder decoder architecture, incorporating a feature fusion network to predict corrected MFLPD values closer to online measurements. Evaluated across five independent fuel cycles, the model reduces the mean nodal array error by 74 percent, the mean absolute deviation in limiting values by 72 percent, and the maximum bias by 52 percent compared to offline methods. These results demonstrate the model's potential to meaningfully improve fuel cycle economics and operational planning, and a commercial variant has been deployed at multiple operating BWRs.