Bruno Clerckx

Rafael Cerna Loli, Onur Dizdar, Bruno Clerckx et al.

Effective and adaptive interference management is required in next generation wireless communication systems. To address this challenge, Rate-Splitting Multiple Access (RSMA), relying on multi-antenna rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers, has been intensively studied in recent years, albeit mostly under the assumption of perfect Channel State Information at the Receiver (CSIR) and ideal capacity-achieving modulation and coding schemes. To assess its practical performance, benefits, and limits under more realistic conditions, this work proposes a novel design for a practical RSMA receiver based on model-based deep learning (MBDL) methods, which aims to unite the simple structure of the conventional SIC receiver and the robustness and model agnosticism of deep learning techniques. The MBDL receiver is evaluated in terms of uncoded Symbol Error Rate (SER), throughput performance through Link-Level Simulations (LLS), and average training overhead. Also, a comparison with the SIC receiver, with perfect and imperfect CSIR, is given. Results reveal that the MBDL receiver outperforms by a significant margin the SIC receiver with imperfect CSIR, due to its ability to generate on demand non-linear symbol detection boundaries in a pure data-driven manner.

Rafael Cerna Loli, Bruno Clerckx

Optimization algorithms for wireless systems play a fundamental role in improving their performance and efficiency. However, it is known that the complexity of conventional optimization algorithms in the literature often exponentially increases with the number of transmit antennas and communication users in the wireless system. Therefore, in the large scale regime, the astronomically large complexity of these optimization algorithms prohibits their use and prevents assessing large scale wireless systems performance under optimized conditions. To overcome this limitation, this work proposes instead the use of an unsupervised meta-learning based approach to directly perform non-convex optimization at significantly reduced complexity. To demonstrate the effectiveness of the proposed meta-learning based solution, the sum-rate (SR) maximization problem for the following three emerging 6G technologies is contemplated: hierarchical rate-splitting multiple access (H-RSMA), integrated sensing and communication (ISAC), and beyond-diagonal reconfigurable intelligent surfaces (BD-RIS). Through numerical results, it is demonstrated that the proposed meta-learning based optimization framework is able to successfully optimize the performance and also reveal unknown aspects of the operation in the large scale regime for the considered three 6G technologies.

Rafael Cerna Loli, Bruno Clerckx

In this letter, we propose the use of a meta-learning based precoder optimization framework to directly optimize the Rate-Splitting Multiple Access (RSMA) precoders with partial Channel State Information at the Transmitter (CSIT). By exploiting the overfitting of the compact neural network to maximize the explicit Average Sum-Rate (ASR) expression, we effectively bypass the need for any other training data while minimizing the total running time. Numerical results reveal that the meta-learning based solution achieves similar ASR performance to conventional precoder optimization in medium-scale scenarios, and significantly outperforms sub-optimal low complexity precoder algorithms in the large-scale regime.

Matteo Nerini, Bruno Clerckx

To meet the demands of future wireless networks, antenna arrays must scale from massive multiple-input multiple-output (MIMO) to gigantic MIMO, involving even larger numbers of antennas. To address the hardware and computational cost of gigantic MIMO, several strategies are available that shift processing from the digital to the analog domain. Among them, microwave linear analog computers (MiLACs) offer a compelling solution by enabling fully analog beamforming through reconfigurable microwave networks. Prior work has focused on fully-connected MiLACs, whose ports are all interconnected to each other via tunable impedance components. Although such MiLACs are capacity-achieving, their circuit complexity, given by the number of required impedance components, scales quadratically with the number of antennas, limiting their practicality. To solve this issue, in this paper, we propose a graph theoretical model of MiLAC facilitating the systematic design of lower-complexity MiLAC architectures. Leveraging this model, we propose stem-connected MiLACs as a family of MiLAC architectures maintaining capacity-achieving performance while drastically reducing the circuit complexity. Besides, we optimize stem-connected MiLACs with a closed-form capacity-achieving solution. Our theoretical analysis, confirmed by numerical simulations, shows that stem-connected MiLACs are capacity-achieving, but with circuit complexity that scales linearly with the number of antennas, enabling high-performance, scalable, gigantic MIMO.

Matteo Nerini, Bruno Clerckx

In this letter, we address blockage detection and precoder design for multiple-input multiple-output (MIMO) links, without communication overhead required. Blockage detection is achieved by classifying light detection and ranging (LIDAR) data through a physics-based graph neural network (GNN). For precoder design, a preliminary channel estimate is obtained by running ray tracing on a 3D surface obtained from LIDAR data. This estimate is successively refined and the precoder is designed accordingly. Numerical simulations show that blockage detection is successful with 95% accuracy. Our digital precoding achieves 90% of the capacity and analog precoding outperforms previous works exploiting LIDAR for precoder design.

Ziang Liu, Zheyu Wu, Bruno Clerckx

Multiple-input multiple-output (MIMO) radar has waveform diversity and large spatial degrees of freedom (DoFs), making it attractive for high-resolution sensing. Scaling MIMO radar to massive arrays can further improve sensing performance, but it also increases hardware cost, power consumption, and digital processing complexity. The microwave linear analog computer (MiLAC) can tackle these challenges by moving linear operations from the digital domain to the analog domain. MiLAC has shown promising benefits for communications in recent studies and this paper identifies its potential for radar sensing. Specifically, we consider both MiLAC-aided transmit beamforming and receiver-side two-dimensional discrete Fourier transform (2D-DFT)-based direction-of-arrival (DoA) estimation. For transmit beamforming, we formulate a weighted Cramer Rao bound (CRB) minimization problem under lossless and reciprocal MiLAC constraints and propose a penalty dual decomposition (PDD)-based iterative algorithm to address the non-convex problem. We further prove that MiLAC-aided and fully-digital beamforming achieve the same CRB. For receiver processing, we show that the 2D DFT can be implemented by a lossless reciprocal MiLAC, which enables analog-domain DoA estimation without digital optimization. Numerical results confirm the theoretical finding and show that the MiLAC-aided approach achieves the same CRB and DoA estimation performance as the fully-digital benchmark. Meanwhile, hardware cost and power consumption are reduced because only low-resolution DACs are required at the transmitter, while RF chains and ADCs are eliminated at the receiver. Moreover, performing the 2D DFT in the analog domain eliminates all digital DFT operations for DoA estimation.

Zheyu Wu, Matteo Nerini, Bruno Clerckx

Reconfigurable intelligent surface (RIS) is a promising technology for future wireless communication systems. Conventional RIS is constrained to a diagonal scattering matrix, which limits its flexibility. Recently, beyond-diagonal RIS (BD-RIS) has been proposed as a more general RIS architecture class that allows inter-element connections and shows great potential for performance improvement. Despite extensive progress on BD-RIS, most existing studies rely on simplified channel models that ignore practical electromagnetic (EM) effects such as mutual coupling and impedance mismatching. To address this gap, this paper investigates the architecture design and optimization of BD-RIS under the general physics-consistent model derived with multiport network theory in recent literature. Building on a compact reformulation of this model, we show that band-connected RIS achieves the same channel-shaping capability as fully-connected RIS, which extends existing results obtained for conventional channel models. We then develop optimization methods under the general physics-consistent model; specifically, we derive closed-form solutions for single-input single-output (SISO) systems, propose a globally optimal semidefinite relaxation (SDR)-based algorithm for single-stream multi-input multi-output (MIMO) systems, and design an efficient alternating direction method of multipliers (ADMM)-based algorithm for multiuser MIMO systems. Using the proposed algorithms, we conduct comprehensive simulations to evaluate the impact of various EM effects and approximations. The results indicate that the commonly adopted unilateral approximation provides sufficient accuracy in RIS-aided systems and can therefore be readily adopted to simplify the channel model, whereas mutual coupling among RIS elements should be properly taken into account in channel modeling.

Zheyu Wu, Bruno Clerckx

Reconfigurable intelligent surfaces (RISs) are envisioned as a promising technology for future wireless communication systems due to their ability to control the propagation environment in a hardware- and energy-efficient way. Recently, the concept of RISs has been extended to beyond-diagonal RISs (BD-RISs), which unlock the full potential of RISs thanks to the presence of tunable interconnections between RIS elements. While various algorithms have been proposed for BD-RIS optimization, they mainly focus on specific architectures whose scattering matrices exhibit very special structures. A universal optimization framework that can accommodate different BD-RIS circuit topologies is still lacking. In this paper, we bridge this research gap by proposing an architecture-independent framework for BD-RIS optimization, with the main focus on sum-rate maximization and transmit power minimization in multiuser multi-input single-output (MU-MISO) systems. Specifically, we first incorporate BD-RIS architectures into the models by connecting the scattering matrix with the admittance matrix and introducing appropriate constraints to the admittance matrix. The formulated problems are then solved by our custom-designed partially proximal alternating direction method of multipliers (pp-ADMM) algorithms. The pp-ADMM algorithms are computationally efficient, with each subproblem either admitting a closed-form solution or being easily solvable. Simulation results demonstrate that the proposed approaches achieve a better trade-off between performance and computational efficiency compared to existing methods.

Zheyu Wu, Junjie Ma, Ya-Feng Liu et al.

Massive multiple-input multiple-output (MIMO) systems employing one-bit digital-to-analog converters offer a hardware-efficient solution for wireless communications. However, the one-bit constraint poses significant challenges for precoding design, as it transforms the problem into a discrete and nonconvex optimization task. In this paper, we investigate a widely adopted ``convex-relaxation-then-quantization" approach for nonlinear symbol-level one-bit precoding. Specifically, we first solve a convex relaxation of the discrete minimum mean square error precoding problem, and then quantize the solution to satisfy the one-bit constraint. Focusing on a real-valued system with an independently and identically distributed (i.i.d.) Gaussian channel, we develop a novel analytical framework based on approximate message passing (AMP) to characterize the high-dimensional asymptotic performance of the considered scheme. The key technical ingredient is an auxiliary AMP iteration that dedicatedly incorporates the nonlinear quantization function into the state evolution analysis. With the proposed framework, we derive a closed-form expression for the symbol error probability (SEP) at the receiver side in the large-system limit, which provides a quantitative characterization of how model and system parameters affect the SEP performance. Our empirical results suggest that the $\ell_\infty^2$ regularizer, when paired with an optimally chosen regularization parameter, achieves optimal SEP performance within a broad class of convex regularization functions. As a first step towards a theoretical justification, we prove the optimality of the $\ell_\infty^2$ regularizer within the mixed $\ell_\infty^2$-$\ell_2^2$ regularization functions.

Valentina Rizzello, Matteo Nerini, Michael Joham et al.

In this work, we propose an efficient method for channel state information (CSI) adaptive quantization and feedback in frequency division duplexing (FDD) systems. Existing works mainly focus on the implementation of autoencoder (AE) neural networks (NNs) for CSI compression, and consider straightforward quantization methods, e.g., uniform quantization, which are generally not optimal. With this strategy, it is hard to achieve a low reconstruction error, especially, when the available number of bits reserved for the latent space quantization is small. To address this issue, we recommend two different methods: one based on a post training quantization and the second one in which the codebook is found during the training of the AE. Both strategies achieve better reconstruction accuracy compared to standard quantization techniques.

Binggui Zhou, Bruno Clerckx

Beyond-diagonal reconfigurable intelligent surface (BD-RIS) has recently been introduced to enable advanced control over electromagnetic waves to further increase the benefits of traditional RIS in enhancing signal quality and improving spectral and energy efficiency for next-generation wireless networks. A significant issue in designing and deploying BD-RIS is the tradeoff between its performance and circuit complexity. Despite some efforts in exploring optimal architectures with the lowest circuit complexities for ideal BD-RIS, architecture discovery for non-ideal BD-RIS remains uninvestigated. Therefore, how non-idealities and circuit complexity jointly affect the performance of BD-RIS remains unclear, making it difficult to achieve the performance - circuit complexity tradeoff in the presence of non-idealities. Essentially, architecture discovery for non-ideal BD-RIS faces challenges from both the computational complexity of global architecture search and the difficulty in achieving global optima. To tackle these challenges, we propose a learning-based two-tier architecture discovery framework (LTTADF) consisting of an architecture generator and a performance optimizer to jointly discover optimal architectures of non-ideal BD-RIS given specific circuit complexities, which can effectively explore over a large architecture space while avoiding getting trapped in poor local optima and thus achieving near-optimal solutions for the performance optimization. Numerical results provide valuable insights for deploying non-ideal BD-RIS considering the performance - circuit complexity tradeoff.