Rishabh Yadav

Cursor Research, Aaron Chan, Ahmed Shalaby et al. · berkeley, microsoft-research

Composer 2 is a specialized model designed for agentic software engineering. The model demonstrates strong long-term planning and coding intelligence while maintaining the ability to efficiently solve problems for interactive use. The model is trained in two phases: first, continued pretraining to improve the model's knowledge and latent coding ability, followed by large-scale reinforcement learning to improve end-to-end coding performance through stronger reasoning, accurate multi-step execution, and coherence on long-horizon realistic coding problems. We develop infrastructure to support training in the same Cursor harness that is used by the deployed model, with equivalent tools and structure, and use environments that match real problems closely. To measure the ability of the model on increasingly difficult tasks, we introduce a benchmark derived from real software engineering problems in large codebases including our own. Composer 2 is a frontier-level coding model and demonstrates a process for training strong domain-specialized models. On our CursorBench evaluations the model achieves a major improvement in accuracy compared to previous Composer models (61.3). On public benchmarks the model scores 61.7 on Terminal-Bench and 73.7 on SWE-bench Multilingual in our harness, comparable to state-of-the-art systems.

Rishabh Dev Yadav, Samaksh Ujjawal, Sihao Sun et al.

Accurate dynamics models are critical for aerial manipulators operating under complex tasks such as payload transport. However, modeling these systems remains fundamentally challenging due to strong quadrotor-manipulator coupling, delayed aerodynamic interactions, and regime-dependent dynamics variations arising from payload changes and manipulator reconfiguration. These effects produce residual dynamics that are simultaneously cross-coupled, history-dependent, and nonstationary, causing both analytical models and purely offline learned models to degrade during deployment. To address these challenges, we propose a structured encoder-decoder framework for adaptive residual dynamics learning in aerial manipulators. The proposed nonlinear latent encoder captures cross-variable coupling and temporal dependencies from state-input histories, while a lightweight linear latent decoder enables online adaptation under regime-dependent nonstationary dynamics. The linear-in-parameter decoder structure permits closed-form Bayesian adaptation together with consistency-driven covariance inflation, enabling rapid and stable adaptation to both transient and slowly varying dynamics changes while remaining compatible with real-time model predictive control (MPC). Experimental results on a real aerial manipulation platform demonstrate improved residual prediction accuracy, faster adaptation under changing operating conditions, and enhanced MPC-based trajectory tracking performance. These results highlight the importance of jointly modeling coupled temporal dynamics and deployment-time nonstationarity for reliable aerial manipulation.

Shivansh Pratap Singh, Naveen Sudheer Nair, Samaksh Ujjawal et al.

Reliable aerial grasping in cluttered environments remains challenging due to occlusions and collision risks. Existing aerial manipulation pipelines largely rely on centroid-based grasping and lack integration between the grasp pose generation models, active exploration, and language-level task specification, resulting in the absence of a complete end-to-end system. In this work, we present an integrated pipeline for reliable aerial grasping in cluttered environments. Given a scene and a language instruction, the system identifies the target object and actively explores it to gain better views of the object. During exploration, a grasp generation network predicts multiple 6-DoF grasp candidates for each view. Each candidate is evaluated using a collision-aware feasibility framework, and the overall best grasp is selected and executed using standard trajectory generation and control methods. Experiments in cluttered real-world scenarios demonstrate robust and reliable grasp execution, highlighting the effectiveness of combining active perception with feasibility-aware grasp selection for aerial manipulation.

Samaksh Ujjawal, Naveen Sudheer Nair, Shivansh Pratap Singh et al.

Autonomous Aerial Manipulators (AAMs) are inherently coupled, nonlinear systems that exhibit nonstationary and multiscale residual dynamics, particularly during manipulator reconfiguration and abrupt payload variations. Conventional analytical dynamic models rely on fixed parametric structures, while static data-driven model assume stationary dynamics and degrade under configuration changes and payload variations. Moreover, existing learning architectures do not explicitly factorize cross-variable coupling and multi-scale temporal effects, conflating instantaneous inertial dynamics with long-horizon regime evolution. We propose a predictive-adaptive framework for real-time residual modeling and compensation in AAMs. The core of this framework is the Factorized Dynamics Transformer (FDT), which treats physical variables as independent tokens. This design enables explicit cross-variable attention while structurally separating short-horizon inertial dependencies from long-horizon aerodynamic effects. To address deployment-time distribution shifts, a Latent Residual Adapter (LRA) performs rapid linear adaptation in the latent space via Recursive Least Squares, preserving the offline nonlinear representation without prohibitive computational overhead. The adapted residual forecast is directly integrated into a residual-compensated adaptive controller. Real-world experiments on an aerial manipulator subjected to unseen payloads demonstrate higher prediction fidelity, accelerated disturbance attenuation, and superior closed-loop tracking precision compared to state-of-the-art learning baselines, all while maintaining strict real-time feasibility.

Shivansh Pratap Singh, Samaksh Ujjwal, Ishita Chaudhary et al.

Aerial manipulators enable physical interaction in hard-to-reach environments; however, the combined problem of direct whole-body aerial manipulation under rapid arm motion, payload changes, and related unknown dynamic uncertainty remains a largely unsolved problem. We present a hierarchical control framework that combines Reinforcement Learning (RL) with an inner-loop dynamics estimator to address this problem. The RL outer loop maps desired 6-degrees-of-freedom (DOF) end-effector targets to coordinated whole-body commands, enabling direct task-driven control without relying on a fully accurate coupled dynamic model in the policy layer. An inner loop then tracks these commands while compensating for transient inertial shifts and uncertainty during execution via a dynamics estimator scheme without requiring system model knowledge. We validate the proposed approach on a custom quadrotor equipped with a 3-DoF manipulator through hardware experiments under varying payload conditions. Compared with RL+PID and RL+INDI+PID baselines, the proposed method reduces end-effector tracking error and improves task success rate across the tested hardware conditions. These results show that combining learned whole-body coordination with estimator-based low-level compensation improves the precision and robustness of aerial manipulation under changing operating conditions.

Sarthak Mishra, Ritama Sanyal, Rishabh Dev Yadav et al.

Object placement is a fundamental component of aerial manipulation tasks, yet existing systems typically require the desired placement position to be specified explicitly in metric coordinates. Such interfaces are not intuitive and require users to reason about coordinate frames and scene geometry, making them difficult to use in practical deployments. In contrast, humans often communicate spatial goals through a combination of language and pointing gestures. Inspired by this observation, we present AERMANI-PLACE, a framework for language-guided object placement with aerial manipulators. Given a scene image and a natural language instruction, an image editing model generates a modified version of the scene containing a visual marker that indicates where the object should be placed. This marker is then grounded into the physical environment using depth observations to recover a metric place point, after which a placement trajectory is generated and executed by the aerial manipulator. We evaluate the proposed approach on a test set of 100 language-guided placement tasks and demonstrate successful execution on a real aerial manipulation platform. Experimental results show that the proposed method reliably infers placement locations from language instructions with an average success rate of 87\% on the test-set and transfers effectively to real-world aerial manipulation with an average success rate of 72\%. Video: https://youtu.be/SgwwgLBsv0g

Sarthak Mishra, Rishabh Dev Yadav, Naveen Nair et al.

Precise object placement remains underexplored in aerial manipulation, where most systems rely on predefined target coordinates and focus primarily on grasping and control. Specifying exact placement poses, however, is cumbersome in real-world settings, where users naturally communicate goals through language. In this work, we present AeroPlace-Flow, a training-free framework for language-grounded aerial object placement that unifies visual foresight with explicit 3D geometric reasoning and object flow. Given RGB-D observations of the object and the placement scene, along with a natural language instruction, AeroPlace-Flow first synthesizes a task-complete goal image using image editing models. The imagined configuration is then grounded into metric 3D space through depth alignment and object-centric reasoning, enabling the inference of a collision-aware object flow that transports the grasped object to a language and contact-consistent placement configuration. The resulting motion is executed via standard trajectory tracking for an aerial manipulator. AeroPlace-Flow produces executable placement targets without requiring predefined poses or task-specific training. We validate our approach through extensive simulation and real-world experiments, demonstrating reliable language-conditioned placement across diverse aerial scenarios with an average success rate of 75% on hardware.

Sudarshan S Harithas, Rishabh Dev Yadav, Deepak Singh et al.

We present CCO-VOXEL: the very first chance-constrained optimization (CCO) algorithm that can compute trajectory plans with probabilistic safety guarantees in real-time directly on the voxel-grid representation of the world. CCO-VOXEL maps the distribution over the distance to the closest obstacle to a distribution over collision-constraint violation and computes an optimal trajectory that minimizes the violation probability. Importantly, unlike existing works, we never assume the nature of the sensor uncertainty or the probability distribution of the resulting collision-constraint violations. We leverage the notion of Hilbert Space embedding of distributions and Maximum Mean Discrepancy (MMD) to compute a tractable surrogate for the original chance-constrained optimization problem and employ a combination of A* based graph-search and Cross-Entropy Method for obtaining its minimum. We show tangible performance gain in terms of collision avoidance and trajectory smoothness as a consequence of our probabilistic formulation vis a vis state-of-the-art planning methods that do not account for such nonparametric noise. Finally, we also show how a combination of low-dimensional feature embedding and pre-caching of Kernel Matrices of MMD allows us to achieve real-time performance in simulations as well as in implementations on on-board commodity hardware that controls the quadrotor flight