Junheng Li

Qianzhong Chen, Junheng Li, Sheng Cheng et al. · stanford

Bipedal locomotion control is essential for humanoid robots to navigate complex, human-centric environments. While optimization-based control designs are popular for integrating sophisticated models of humanoid robots, they often require labor-intensive manual tuning. In this work, we address the challenges of parameter selection in bipedal locomotion control using DiffTune, a model-based autotuning method that leverages differential programming for efficient parameter learning. A major difficulty lies in balancing model fidelity with differentiability. We address this difficulty using a low-fidelity model for differentiability, enhanced by a Ground Reaction Force-and-Moment Network (GRFM-Net) to capture discrepancies between MPC commands and actual control effects. We validate the parameters learned by DiffTune with GRFM-Net in hardware experiments, which demonstrates the parameters' optimality in a multi-objective setting compared with baseline parameters, reducing the total loss by up to 40.5$\%$ compared with the expert-tuned parameters. The results confirm the GRFM-Net's effectiveness in mitigating the sim-to-real gap, improving the transferability of simulation-learned parameters to real hardware.

Junheng Li, Junchao Ma, Quan Nguyen

In this paper, we propose a novel approach on controlling wheel-legged quadrupedal robots using pose optimization and force control via quadratic programming (QP). Our method allows the robot to leverage the whole-body motion and the wheel actuation to roll over high obstacles while keeping the wheel torques to navigate the terrain while keeping the wheel traction and balancing the robot body. In detail, we first present a linear rigid body dynamics with wheels that can be used for real-time balancing control of wheel-legged robots. We then introduce an effective pose optimization method for wheel-legged robot's locomotion over steep ramp and stair terrains. The pose optimization solves for optimal poses to enhance stability and enforce collision-fee constraints for the rolling motion over stair terrain. Experimental validation on the real robot demonstrated the capability of rolling up on a 0.36 m obstacle. The robot can also successfully roll up and down multiple stairs without lifting its legs or having collision with the terrain.

Junheng Li, Quan Nguyen

In this paper, we propose a novel framework on force-and-moment-based Model Predictive Control (MPC) for dynamic legged robots. Specifically, we present a formulation of MPC designed for 10 degree-of-freedom (DoF) bipedal robots using simplified rigid body dynamics with input forces and moments. This MPC controller will calculate the optimal inputs applied to the robot, including 3-D forces and 2-D moments at each foot. These desired inputs will then be generated by mapping these forces and moments to motor torques of 5 actuators on each leg. We evaluate our proposed control design on physical simulation of a 10 degree-of-freedom (DoF) bipedal robot. The robot can achieve fast walking speed up to 1.6 m/s on rough terrain, with accurate velocity tracking. With the same control framework, our proposed approach can achieve a wide range of dynamic motions including walking, hopping, and running using the same set of control parameters.