Ao Li

Ping Chang, Huayu Li, Stuart F. Quan et al.

Background and Objective: Vital sign monitoring in the Intensive Care Unit (ICU) is crucial for enabling prompt interventions for patients. This underscores the need for an accurate predictive system. Therefore, this study proposes a novel deep learning approach for forecasting Heart Rate (HR), Systolic Blood Pressure (SBP), and Diastolic Blood Pressure (DBP) in the ICU. Methods: We extracted $24,886$ ICU stays from the MIMIC-III database which contains data from over $46$ thousand patients, to train and test the model. The model proposed in this study, Transformer-based Diffusion Probabilistic Model for Sparse Time Series Forecasting (TDSTF), merges Transformer and diffusion models to forecast vital signs. The TDSTF model showed state-of-the-art performance in predicting vital signs in the ICU, outperforming other models' ability to predict distributions of vital signs and being more computationally efficient. The code is available at https://github.com/PingChang818/TDSTF. Results: The results of the study showed that TDSTF achieved a Standardized Average Continuous Ranked Probability Score (SACRPS) of $0.4438$ and a Mean Squared Error (MSE) of $0.4168$, an improvement of $18.9\%$ and $34.3\%$ over the best baseline model, respectively. The inference speed of TDSTF is more than $17$ times faster than the best baseline model. Conclusion: TDSTF is an effective and efficient solution for forecasting vital signs in the ICU, and it shows a significant improvement compared to other models in the field.

Yongzi Yu, Ao Li, Le Wang et al.

Large language model (LLM) agents have shown promise in automating complex data-analysis workflows, but their reliable deployment remains challenging in high-stakes industrial scenarios. Industrial anomaly detection (IAD) is essential for manufacturing quality, safety, and efficiency, yet existing LLM-based IAD agents mainly focus on execution while under-exploiting strategy formulation. Consequently, they struggle to handle heterogeneous modalities in a unified and cost-effective manner. Inspired by the DMAIC quality-management framework, we propose DMAIC-IAD (DMAIC-inspired Agentic Industrial Anomaly Detection), a "Plan First, Judge Later" multi-agent system that aligns LLM agents with structured industrial problem-solving. DMAIC-IAD distills heterogeneous references into standardized operating procedures (SOPs) before strategy generation, and introduces a pre-trained execution-free judge model to rank candidate strategies without costly runtime trials. Extensive experiments across four modalities show that DMAIC-IAD improves average detection performance over applicable agentic baselines by 37.76%.

Andrey Ignatov, Radu Timofte, Maurizio Denna et al.

Image super-resolution is a common task on mobile and IoT devices, where one often needs to upscale and enhance low-resolution images and video frames. While numerous solutions have been proposed for this problem in the past, they are usually not compatible with low-power mobile NPUs having many computational and memory constraints. In this Mobile AI challenge, we address this problem and propose the participants to design an efficient quantized image super-resolution solution that can demonstrate a real-time performance on mobile NPUs. The participants were provided with the DIV2K dataset and trained INT8 models to do a high-quality 3X image upscaling. The runtime of all models was evaluated on the Synaptics VS680 Smart Home board with a dedicated edge NPU capable of accelerating quantized neural networks. All proposed solutions are fully compatible with the above NPU, demonstrating an up to 60 FPS rate when reconstructing Full HD resolution images. A detailed description of all models developed in the challenge is provided in this paper.

Ao Li, Le Zhang, Yun Liu et al.

Transformer-based methods have exhibited remarkable potential in single image super-resolution (SISR) by effectively extracting long-range dependencies. However, most of the current research in this area has prioritized the design of transformer blocks to capture global information, while overlooking the importance of incorporating high-frequency priors, which we believe could be beneficial. In our study, we conducted a series of experiments and found that transformer structures are more adept at capturing low-frequency information, but have limited capacity in constructing high-frequency representations when compared to their convolutional counterparts. Our proposed solution, the cross-refinement adaptive feature modulation transformer (CRAFT), integrates the strengths of both convolutional and transformer structures. It comprises three key components: the high-frequency enhancement residual block (HFERB) for extracting high-frequency information, the shift rectangle window attention block (SRWAB) for capturing global information, and the hybrid fusion block (HFB) for refining the global representation. To tackle the inherent intricacies of transformer structures, we introduce a frequency-guided post-training quantization (PTQ) method aimed at enhancing CRAFT's efficiency. These strategies incorporate adaptive dual clipping and boundary refinement. To further amplify the versatility of our proposed approach, we extend our PTQ strategy to function as a general quantization method for transformer-based SISR techniques. Our experimental findings showcase CRAFT's superiority over current state-of-the-art methods, both in full-precision and quantization scenarios. These results underscore the efficacy and universality of our PTQ strategy. The source code is available at: https://github.com/AVC2-UESTC/Frequency-Inspired-Optimization-for-EfficientSR.git.

Xinhang Wan, Jiyuan Liu, Hao Yu et al.

Multi-view clustering thrives in applications where views are collected in advance by extracting consistent and complementary information among views. However, it overlooks scenarios where data views are collected sequentially, i.e., real-time data. Due to privacy issues or memory burden, previous views are not available with time in these situations. Some methods are proposed to handle it but are trapped in a stability-plasticity dilemma. In specific, these methods undergo a catastrophic forgetting of prior knowledge when a new view is attained. Such a catastrophic forgetting problem (CFP) would cause the consistent and complementary information hard to get and affect the clustering performance. To tackle this, we propose a novel method termed Contrastive Continual Multi-view Clustering with Filtered Structural Fusion (CCMVC-FSF). Precisely, considering that data correlations play a vital role in clustering and prior knowledge ought to guide the clustering process of a new view, we develop a data buffer with fixed size to store filtered structural information and utilize it to guide the generation of a robust partition matrix via contrastive learning. Furthermore, we theoretically connect CCMVC-FSF with semi-supervised learning and knowledge distillation. Extensive experiments exhibit the excellence of the proposed method.

Huayu Li, Gregory Ditzler, Janet Roveda et al.

Objective: Electrocardiogram (ECG) signals commonly suffer noise interference, such as baseline wander. High-quality and high-fidelity reconstruction of the ECG signals is of great significance to diagnosing cardiovascular diseases. Therefore, this paper proposes a novel ECG baseline wander and noise removal technology. Methods: We extended the diffusion model in a conditional manner that was specific to the ECG signals, namely the Deep Score-Based Diffusion model for Electrocardiogram baseline wander and noise removal (DeScoD-ECG). Moreover, we deployed a multi-shots averaging strategy that improved signal reconstructions. We conducted the experiments on the QT Database and the MIT-BIH Noise Stress Test Database to verify the feasibility of the proposed method. Baseline methods are adopted for comparison, including traditional digital filter-based and deep learning-based methods. Results: The quantities evaluation results show that the proposed method obtained outstanding performance on four distance-based similarity metrics with at least 20\% overall improvement compared with the best baseline method. Conclusion: This paper demonstrates the state-of-the-art performance of the DeScoD-ECG for ECG baseline wander and noise removal, which has better approximations of the true data distribution and higher stability under extreme noise corruptions. Significance: This study is one of the first to extend the conditional diffusion-based generative model for ECG noise removal, and the DeScoD-ECG has the potential to be widely used in biomedical applications.

Ping Chang, Tosiron Adegbija, Yuchao Liao et al.

High-level synthesis (HLS) has significantly advanced the automation of digital circuits design, yet the need for expertise and time in pragma tuning remains challenging. Existing solutions for the design space exploration (DSE) adopt either heuristic methods, lacking essential information for further optimization potential, or predictive models, missing sufficient generalization due to the time-consuming nature of HLS and the exponential growth of the design space. To address these challenges, we propose Deep Inverse Design for HLS (DID4HLS), a novel approach that integrates graph neural networks and generative models. DID4HLS iteratively optimizes hardware designs aimed at compute-intensive algorithms by learning conditional distributions of design features from post-HLS data. Compared to four state-of-the-art DSE baselines, our method achieved an average improvement of 42.8% on average distance to reference set (ADRS) compared to the best-performing baselines across six benchmarks, while demonstrating high robustness and efficiency. The code is available at https://github.com/PingChang818/DID4HLS.

Ao Li, Chen Chen, Zhenyu Wang et al.

Exposure correction is essential for enhancing image quality under challenging lighting conditions. While supervised learning has achieved significant progress in this area, it relies heavily on large-scale labeled datasets, which are difficult to obtain in practical scenarios. To address this limitation, we propose a pseudo label-based unsupervised method called LoopExpose for arbitrary-length exposure correction. A nested loop optimization strategy is proposed to address the exposure correction problem, where the correction model and pseudo-supervised information are jointly optimized in a two-level framework. Specifically, the upper-level trains a correction model using pseudo-labels generated through multi-exposure fusion at the lower level. A feedback mechanism is introduced where corrected images are fed back into the fusion process to refine the pseudo-labels, creating a self-reinforcing learning loop. Considering the dominant role of luminance calibration in exposure correction, a Luminance Ranking Loss is introduced to leverage the relative luminance ordering across the input sequence as a self-supervised constraint. Extensive experiments on different benchmark datasets demonstrate that LoopExpose achieves superior exposure correction and fusion performance, outperforming existing state-of-the-art unsupervised methods. Code is available at https://github.com/FALALAS/LoopExpose.

Ao Li, Robert M. Corless

In the paper "A Chaotic Search for $i$"~(\cite{strang1991chaotic}), Strang completely explained the behaviour of Newton's method when using real initial guesses on $f(x) = x^{2}+1$, which has only a pair of complex roots $\pm i$. He explored an exact symbolic formula for the iteration, namely $x_{n}=\cot{ \left( 2^{n} θ_{0} \right) }$, which is valid in exact arithmetic. In this paper, we extend this to to $k^{th}$ order Householder methods, which include Halley's method, and to the secant method. Two formulae, $x_{n}=\cot{ \left( θ_{n-1}+θ_{n-2} \right) }$ with $θ_{n-1}=\mathrm{arccot}{\left(x_{n-1}\right)}$ and $θ_{n-2}=\mathrm{arccot}{\left(x_{n-2}\right)}$, and $x_{n}=\cot{ \left( (k+1)^{n} θ_{0} \right) }$ with $θ_{0} = \mathrm{arccot}(x_{0})$, are provided. The asymptotic behaviour and periodic character are illustrated by experimental computation. We show that other methods (Schröder iterations of the first kind) are generally not so simple. We also explain an old method that can be used to allow Maple's \textsl{Fractals[Newton]} package to visualize general one-step iterations by disguising them as Newton iterations.

Yuyang Tan, Renhe Zhang, Hang Zhang et al.

Referring 3D Gaussian Splatting (R3DGS), which utilizes natural language for 3D object segmentation, has emerged as a crucial capability for embodied AI. However, existing methods typically rely on expensive per-scene manual annotation and per-view pseudo mask generation, which suffer from multi-view inconsistency and poor generalization to varying query specificities. To address this, we present TrackRef3D, a fully automatic pipeline that achieves open-world referring segmentation in 3D Gaussian Splatting (3DGS) without manual annotation by introducing a multi-view consistent track-then-label paradigm that fundamentally decouples object discovery from semantic grounding. Specifically, we propose a Trajectory-Aware Semantic Consensus Module (TSCM) which aggregates cross-view predictions via synonymous clustering and trajectory-aware voting to establish a canonical semantic identity, thereby ensuring multi-view consistency. Furthermore, we employ a visibility-aware description generation strategy to mitigate ambiguity and propose a Hybrid Training Strategy (HTS) that jointly optimizes coarse category semantics and fine-grained referential cues to ensure robustness under varying query specificities using a multi-positive contrastive objective. Extensive experiments on benchmarks demonstrate that TrackRef3D achieves state-of-the-art performance.

Shibiao Xu, ShuChen Zheng, Wenhao Xu et al.

Infrared small object detection is an important computer vision task involving the recognition and localization of tiny objects in infrared images, which usually contain only a few pixels. However, it encounters difficulties due to the diminutive size of the objects and the generally complex backgrounds in infrared images. In this paper, we propose a deep learning method, HCF-Net, that significantly improves infrared small object detection performance through multiple practical modules. Specifically, it includes the parallelized patch-aware attention (PPA) module, dimension-aware selective integration (DASI) module, and multi-dilated channel refiner (MDCR) module. The PPA module uses a multi-branch feature extraction strategy to capture feature information at different scales and levels. The DASI module enables adaptive channel selection and fusion. The MDCR module captures spatial features of different receptive field ranges through multiple depth-separable convolutional layers. Extensive experimental results on the SIRST infrared single-frame image dataset show that the proposed HCF-Net performs well, surpassing other traditional and deep learning models. Code is available at https://github.com/zhengshuchen/HCFNet.

Tianle Zhang, Zhihao Yuan, Dafeng Chi et al.

Robotic autonomy in open-world environments is fundamentally limited by insufficient data diversity and poor cross-embodiment generalization. Existing robotic datasets are often limited in scale and task coverage, while relatively large differences across robot embodiments impede effective behavior knowledge transfer. To address these challenges, we propose JoyAI-RA, a vision-language-action (VLA) embodied foundation model tailored for generalizable robotic manipulation. JoyAI-RA presents a multi-source multi-level pretraining framework that integrates web data, large-scale egocentric human manipulation videos, simulation-generated trajectories, and real-robot data. Through training on heterogeneous multi-source data with explicit action-space unification, JoyAI-RA effectively bridges embodiment gaps, particularly between human manipulation and robotic control, thereby enhancing cross-embodiment behavior learning. JoyAI-RA outperforms state-of-the-art methods in both simulation and real-world benchmarks, especially on diverse tasks with generalization demands.

Huayu Li, Xiwen Chen, Gregory Ditzler et al.

Knowledge distillation constitutes a potent methodology for condensing substantial neural networks into more compact and efficient counterparts. Within this context, softmax regression representation learning serves as a widely embraced approach, leveraging a pre-established teacher network to guide the learning process of a diminutive student network. Notably, despite the extensive inquiry into the efficacy of softmax regression representation learning, the intricate underpinnings governing the knowledge transfer mechanism remain inadequately elucidated. This study introduces the 'Ideal Joint Classifier Knowledge Distillation' (IJCKD) framework, an overarching paradigm that not only furnishes a lucid and exhaustive comprehension of prevailing knowledge distillation techniques but also establishes a theoretical underpinning for prospective investigations. Employing mathematical methodologies derived from domain adaptation theory, this investigation conducts a comprehensive examination of the error boundary of the student network contingent upon the teacher network. Consequently, our framework facilitates efficient knowledge transference between teacher and student networks, thereby accommodating a diverse spectrum of applications.

Ao Li, Shangpeng Yang, Fahao Chen et al.

Large Language Model (LLM)-based agents demonstrate strong reasoning and execution capabilities on complex tasks when guided by structured instructions, commonly referred to as workflows. However, existing workflow-assisted agent serving systems typically rely on predefined templates and shallow matching mechanisms, which limit their ability to capture deep semantic relationships and generalize to previously unseen tasks. To address these limitations, we propose a new workflow management paradigm that represents workflows using a unified graph, termed wGraph, where each node corresponds to an atomic operation. wGraph serves as a shared substrate from which task-specific workflows are dynamically instantiated. Building on wGraph primitives, we introduce GraphFlow, a system that efficiently integrates workflows into agent serving through two key designs. First, adaptive workflow generation dynamically constructs workflows from wGraph based on task semantics and constraint requirements. Second, workflow state management exploits wGraph structure to efficiently manage Key-Value (KV) caches, reducing redundant computation during agent serving. Extensive experiments across five benchmark datasets show that GraphFlow consistently outperforms state-of-the-art methods, yielding an average performance improvement of approximately 4.95 percentage points, while achieving an approximately 4$\times$ reduction in memory footprint.

Huayu Li, Ana S. Carreon-Rascon, Xiwen Chen et al.

Medical time series data are indispensable in healthcare, providing critical insights for disease diagnosis, treatment planning, and patient management. The exponential growth in data complexity, driven by advanced sensor technologies, has presented challenges related to data labeling. Self-supervised learning (SSL) has emerged as a transformative approach to address these challenges, eliminating the need for extensive human annotation. In this study, we introduce a novel framework for Medical Time Series Representation Learning, known as MTS-LOF. MTS-LOF leverages the strengths of contrastive learning and Masked Autoencoder (MAE) methods, offering a unique approach to representation learning for medical time series data. By combining these techniques, MTS-LOF enhances the potential of healthcare applications by providing more sophisticated, context-rich representations. Additionally, MTS-LOF employs a multi-masking strategy to facilitate occlusion-invariant feature learning. This approach allows the model to create multiple views of the data by masking portions of it. By minimizing the discrepancy between the representations of these masked patches and the fully visible patches, MTS-LOF learns to capture rich contextual information within medical time series datasets. The results of experiments conducted on diverse medical time series datasets demonstrate the superiority of MTS-LOF over other methods. These findings hold promise for significantly enhancing healthcare applications by improving representation learning. Furthermore, our work delves into the integration of joint-embedding SSL and MAE techniques, shedding light on the intricate interplay between temporal and structural dependencies in healthcare data. This understanding is crucial, as it allows us to grasp the complexities of healthcare data analysis.

Ao Li, Yonggen Ling, Yiyang Lin et al.

Accurate 3D human keypoints localization is a critical technology enabling robots to achieve natural and safe physical interaction with users. Conventional 3D human keypoints estimation methods primarily focus on the whole-body reconstruction quality relative to the root joint. However, in practical human-robot interaction (HRI) scenarios, robots are more concerned with the precise metric-scale spatial localization of task-relevant body parts under the egocentric camera 3D coordinate. We propose TAIHRI, the first Vision-Language Model (VLM) tailored for close-range HRI perception, capable of understanding users' motion commands and directing the robot's attention to the most task-relevant keypoints. By quantizing 3D keypoints into a finite interaction space, TAIHRI precisely localize the 3D spatial coordinates of critical body parts by 2D keypoint reasoning via next token prediction, and seamlessly adapt to downstream tasks such as natural language control or global space human mesh recovery. Experiments on egocentric interaction benchmarks demonstrate that TAIHRI achieves superior estimation accuracy for task-critical body parts. We believe TAIHRI opens new research avenues in the field of embodied human-robot interaction. Code is available at: https://github.com/Tencent/TAIHRI.

Yixi Chen, Weixuan Liang, Tianrui Liu et al.

Kernel power $k$-means (KPKM) leverages a family of means to mitigate local minima issues in kernel $k$-means. However, KPKM faces two key limitations: (1) the computational burden of the full kernel matrix restricts its use on extensive data, and (2) the lack of authentic centroid-sample assignment learning reduces its noise robustness. To overcome these challenges, we propose RFF-KPKM, introducing the first approximation theory for applying random Fourier features (RFF) to KPKM. RFF-KPKM employs RFF to generate efficient, low-dimensional feature maps, bypassing the need for the whole kernel matrix. Crucially, we are the first to establish strong theoretical guarantees for this combination: (1) an excess risk bound of $\mathcal{O}(\sqrt{k^3/n})$, (2) strong consistency with membership values, and (3) a $(1+\varepsilon)$ relative error bound achievable using the RFF of dimension $\mathrm{poly}(\varepsilon^{-1}\log k)$. Furthermore, to improve robustness and the ability to learn multiple kernels, we propose IP-RFF-MKPKM, an improved possibilistic RFF-based multiple kernel power $k$-means. IP-RFF-MKPKM ensures the scalability of MKPKM via RFF and refines cluster assignments by combining the merits of the possibilistic membership and fuzzy membership. Experiments on large-scale datasets demonstrate the superior efficiency and clustering accuracy of the proposed methods compared to the state-of-the-art alternatives.

Hailong Yan, Ao Li, Xiangtao Zhang et al.

Recent advancements in deep neural networks have driven significant progress in image enhancement (IE). However, deploying deep learning models on resource-constrained platforms, such as mobile devices, remains challenging due to high computation and memory demands. To address these challenges and facilitate real-time IE on mobile, we introduce an extremely lightweight Convolutional Neural Network (CNN) framework with around 4K parameters. Our approach integrates reparameterization with an Incremental Weight Optimization strategy to ensure efficiency. Additionally, we enhance performance with a Feature Self-Transform module and a Hierarchical Dual-Path Attention mechanism, optimized with a Local Variance-Weighted loss. With this efficient framework, we are the first to achieve real-time IE inference at up to 1,100 frames per second (FPS) while delivering competitive image quality, achieving the best trade-off between speed and performance across multiple IE tasks. The code will be available at https://github.com/AVC2-UESTC/MobileIE.git.

Ao Li, Longwei Xu, Chen Ling et al.

Sentiment and emotion understanding are essential to applications such as human-computer interaction and depression detection. While Multimodal Large Language Models (MLLMs) demonstrate robust general capabilities, they face considerable challenges in the field of affective computing, particularly in detecting subtle facial expressions and handling complex emotion-related tasks, such as emotion reason inference and understanding emotions in long-context scenarios. Furthermore, there is a lack of a unified MLLM that can effectively handle both sentiment and emotion-related tasks. To address these challenges, we explore multi-task training strategies for MLLMs in affective computing and introduce Emotion Universe (EmoVerse), an MLLM designed to handle a broad spectrum of sentiment and emotion-related tasks. In addition, EmoVerse is capable of deeply analyzing the underlying causes of emotional states. We also introduce the Affective Multitask (AMT) Dataset, which supports multimodal sentiment analysis, multimodal emotion recognition, facial expression recognition, emotion reason inference, and emotion cause-pair extraction tasks. Extensive experiments demonstrate that EmoVerse outperforms existing methods, achieving state-of-the-art results in sentiment and emotion-related tasks. The code is available at https://github.com/liaolea/EmoVerse.

Cheng Lei, Jie Fan, Xinran Li et al.

Camouflaged Object Segmentation (COS) faces significant challenges due to the scarcity of annotated data, where meticulous pixel-level annotation is both labor-intensive and costly, primarily due to the intricate object-background boundaries. Addressing the core question, "Can COS be effectively achieved in a zero-shot manner without manual annotations for any camouflaged object?" we affirmatively respond and introduce a robust zero-shot COS framework. This framework leverages the inherent local pattern bias of COS and employs a broad semantic feature space derived from salient object segmentation (SOS) for efficient zero-shot transfer. We incorporate an Masked Image Modeling (MIM) based image encoder optimized for Parameter-Efficient Fine-Tuning (PEFT), a Multimodal Large Language Model (M-LLM), and a Multi-scale Fine-grained Alignment (MFA) mechanism. The MIM pre-trained image encoder focuses on capturing essential low-level features, while the M-LLM generates caption embeddings processed alongside these visual cues. These embeddings are precisely aligned using MFA, enabling our framework to accurately interpret and navigate complex semantic contexts. To optimize operational efficiency, we introduce a learnable codebook that represents the M-LLM during inference, significantly reducing computational overhead. Our framework demonstrates its versatility and efficacy through rigorous experimentation, achieving state-of-the-art performance in zero-shot COS with $F_β^w$ scores of 72.9\% on CAMO and 71.7\% on COD10K. By removing the M-LLM during inference, we achieve an inference speed comparable to that of traditional end-to-end models, reaching 18.1 FPS. Code: https://github.com/R-LEI360725/ZSCOS-CaMF

Yixuan Zhu, Haolin Wang, Ao Li et al.

Image enhancement finds wide-ranging applications in real-world scenarios due to complex environments and the inherent limitations of imaging devices. Recent diffusion-based methods yield promising outcomes but necessitate prolonged and computationally intensive iterative sampling. In response, we propose InstaRevive, a straightforward yet powerful image enhancement framework that employs score-based diffusion distillation to harness potent generative capability and minimize the sampling steps. To fully exploit the potential of the pre-trained diffusion model, we devise a practical and effective diffusion distillation pipeline using dynamic control to address inaccuracies in updating direction during score matching. Our control strategy enables a dynamic diffusing scope, facilitating precise learning of denoising trajectories within the diffusion model and ensuring accurate distribution matching gradients during training. Additionally, to enrich guidance for the generative power, we incorporate textual prompts via image captioning as auxiliary conditions, fostering further exploration of the diffusion model. Extensive experiments substantiate the efficacy of our framework across a diverse array of challenging tasks and datasets, unveiling the compelling efficacy and efficiency of InstaRevive in delivering high-quality and visually appealing results. Code is available at https://github.com/EternalEvan/InstaRevive.

Weizhen Liu, Jiayu Tan, Guangyu Lan et al.

Accurate phenotypic analysis in aquaculture breeding necessitates the quantification of subtle morphological phenotypes. Existing datasets suffer from limitations such as small scale, limited species coverage, and inadequate annotation of keypoints for measuring refined and complex morphological phenotypes of fish body parts. To address this gap, we introduce FishPhenoKey, a comprehensive dataset comprising 23,331 high-resolution images spanning six fish species. Notably, FishPhenoKey includes 22 phenotype-oriented annotations, enabling the capture of intricate morphological phenotypes. Motivated by the nuanced evaluation of these subtle morphologies, we also propose a new evaluation metric, Percentage of Measured Phenotype (PMP). It is designed to assess the accuracy of individual keypoint positions and is highly sensitive to the phenotypes measured using the corresponding keypoints. To enhance keypoint detection accuracy, we further propose a novel loss, Anatomically-Calibrated Regularization (ACR), that can be integrated into keypoint detection models, leveraging biological insights to refine keypoint localization. Our contributions set a new benchmark in fish phenotype analysis, addressing the challenges of precise morphological quantification and opening new avenues for research in sustainable aquaculture and genetic studies. Our dataset and code are available at https://github.com/WeizhenLiuBioinform/Fish-Phenotype-Detect.

Ao Li, Jiawei Sun, Le Dong et al.

Real-world exposure correction is fundamentally challenged by spatially non-uniform degradations, where diverse exposure errors frequently coexist within a single image. However, existing exposure correction methods are still largely developed under a predominantly uniform assumption. Architecturally, they typically rely on globally aggregated modulation signals that capture only the overall exposure trend. From the optimization perspective, conventional reconstruction losses are usually derived under a shared global scale, thus overlooking the spatially varying correction demands across regions. To address these limitations, we propose a new exposure correction paradigm explicitly designed for spatial non-uniformity. Specifically, we introduce a Spatial Signal Encoder to predict spatially adaptive modulation weights, which are used to guide multiple look-up tables for image transformation, together with an HSL-based compensation module for improved color fidelity. Beyond the architectural design, we propose an uncertainty-inspired non-uniform loss that dynamically allocates the optimization focus based on local restoration uncertainties, better matching the heterogeneous nature of real-world exposure errors. Extensive experiments demonstrate that our method achieves superior qualitative and quantitative performance compared with state-of-the-art methods. Code is available at https://github.com/FALALAS/rethinkingEC.

Jialiang Sun, Yuzhi Tang, Ao Li et al. · deepmind, utoronto

Mathematical reasoning is central to artificial intelligence, with applications in education, code generation, and research-level mathematical discovery. Mathematical competitions highlight two problem types: theorem proving, requiring rigorous proofs, and answer construction, requiring creative generation and formal verification of mathematical objects. Existing research reveals that LLMs can tackle difficult answer-construction tasks but are prone to errors from hallucinations and unverifiable steps, while symbolic methods guarantee rigor but falter in creative answer construction. This raises a key understudied question: how to solve answer-construction problems while preserving both LLM creativity and mathematical rigor? To address this problem, we introduce the Enumerate-Conjecture-Prove (ECP) framework, a modular neuro-symbolic method integrating LLM-based enumeration and pattern-driven conjecturing with formal theorem proving in Lean, and ConstructiveBench, a dataset of 3,640 formal answer-construction problems from math competitions. ECP is model agnostic and shows consistent improvements over pure LLM baselines: on the subset of PutnamBench for answer construction, ECP formally solves 6 out of 337 answer-construction problems end to end (up from 4 without ECP) using GPT-5 mini and DeepSeek-Prover-V2-7B. On ConstructiveBench, ECP achieves 33.1% end-to-end state-of-the-art accuracy (up from 32.5%), demonstrating its potential to advance formal mathematical reasoning by combining LLM conjecturing with formal verification. Our code and dataset are publicly available at GitHub (https://github.com/sunjia72/ECP) and Hugging Face (https://huggingface.co/datasets/sunjia72/ConstructiveBench).

Xin Gao, Xueyuan Li, Hao Liu et al.

Platooning technology is renowned for its precise vehicle control, traffic flow optimization, and energy efficiency enhancement. However, in large-scale mixed platoons, vehicle heterogeneity and unpredictable traffic conditions lead to virtual bottlenecks. These bottlenecks result in reduced traffic throughput and increased energy consumption within the platoon. To address these challenges, we introduce a decision-making strategy based on nested graph reinforcement learning. This strategy improves collaborative decision-making, ensuring energy efficiency and alleviating congestion. We propose a theory of nested traffic graph representation that maps dynamic interactions between vehicles and platoons in non-Euclidean spaces. By incorporating spatio-temporal weighted graph into a multi-head attention mechanism, we further enhance the model's capacity to process both local and global data. Additionally, we have developed a nested graph reinforcement learning framework to enhance the self-iterative learning capabilities of platooning. Using the I-24 dataset, we designed and conducted comparative algorithm experiments, generalizability testing, and permeability ablation experiments, thereby validating the proposed strategy's effectiveness. Compared to the baseline, our strategy increases throughput by 10% and decreases energy use by 9%. Specifically, increasing the penetration rate of CAVs significantly enhances traffic throughput, though it also increases energy consumption.

Ao Li, Zihan Xiao, Zihao Yue et al.

Proactive streaming video understanding requires models to continuously process video streams and decide when to respond, rather than merely what to respond. This naturally introduces a decision-making problem under partial observations, where models must balance early prediction against sufficient evidence. However, existing benchmarks largely follow a "see-then-answer" paradigm, where responses are triggered only after explicit evidence appears, effectively reducing proactive reasoning to delayed perception. As a result, they fail to evaluate a model's ability to make timely and reliable decisions under incomplete observations. Moreover, training proactive models is inherently challenging due to the extreme imbalance between silence and response signals in streaming trajectories, as well as the need to jointly optimize response correctness and timing. To address these challenges, we introduce StreamPro-Bench, a new benchmark that evaluates streaming models from three complementary perspectives: Perception Understanding, Temporal Reasoning, and Proactive Agency, where the last measures a model's ability to make early yet reliable decisions under partial observations. We further propose StreamPro, a two-stage training framework for proactive learning. First, we introduce CB-Stream Loss to mitigate the severe supervision imbalance during supervised fine-tuning (SFT). Then, we apply Group Relative Policy Optimization (GRPO) with a multi-grained reward design that involves both turn-level and trajectory-level rewards. Experiments show that StreamPro significantly improves proactive performance. On StreamPro-Bench, it achieves 41.5, substantially outperforming the previous best (10.4), while also maintaining strong performance on real-time streaming benchmarks, achieving 78.9 on StreamingBench-RTVU.

Huayu Li, ZhengXiao He, Siyuan Tian et al.

Standard autoregressive decoding in large language models (LLMs) is inherently short-sighted, often failing to find globally optimal reasoning paths due to its token-by-token generation process. While inference-time strategies like foresight sampling attempt to mitigate this by simulating future steps, they typically rely on ad-hoc heuristics for valuing paths and pruning the search space. This paper introduces Martingale Foresight Sampling (MFS), a principled framework that reformulates LLM decoding as a problem of identifying an optimal stochastic process. By modeling the quality of a reasoning path as a stochastic process, we leverage Martingale theory to design a theoretically-grounded algorithm. Our approach replaces heuristic mechanisms with principles from probability theory: step valuation is derived from the Doob Decomposition Theorem to measure a path's predictable advantage, path selection uses Optional Stopping Theory for principled pruning of suboptimal candidates, and an adaptive stopping rule based on the Martingale Convergence Theorem terminates exploration once a path's quality has provably converged. Experiments on six reasoning benchmarks demonstrate that MFS surpasses state-of-the-art methods in accuracy while significantly improving computational efficiency. Code will be released at https://github.com/miraclehetech/EACL2026-Martingale-Foresight-Sampling.

Le Zhang, Ao Li, Qibin Hou et al.

Super-resolution (SR) has garnered significant attention within the computer vision community, driven by advances in deep learning (DL) techniques and the growing demand for high-quality visual applications. With the expansion of this field, numerous surveys have emerged. Most existing surveys focus on specific domains, lacking a comprehensive overview of this field. Here, we present an in-depth review of diverse SR methods, encompassing single image super-resolution (SISR), video super-resolution (VSR), stereo super-resolution (SSR), and light field super-resolution (LFSR). We extensively cover over 150 SISR methods, nearly 70 VSR approaches, and approximately 30 techniques for SSR and LFSR. We analyze methodologies, datasets, evaluation protocols, empirical results, and complexity. In addition, we conducted a taxonomy based on each backbone structure according to the diverse purposes. We also explore valuable yet under-studied open issues in the field. We believe that this work will serve as a valuable resource and offer guidance to researchers in this domain. To facilitate access to related work, we created a dedicated repository available at https://github.com/AVC2-UESTC/Holistic-Super-Resolution-Review.

Ao Li, Yuxiang Duan, Jinghui Zhang et al.

Large Vision-Language Models (LVLMs) have advanced multimodal learning but face high computational costs due to the large number of visual tokens, motivating token pruning to improve inference efficiency. The key challenge lies in identifying which tokens are truly important. Most existing approaches rely on attention-based criteria to estimate token importance. However, they inherently suffer from certain limitations, such as positional bias. In this work, we explore a new perspective on token importance based on token transitions in LVLMs. We observe that the transition of token representations provides a meaningful signal of semantic information. Based on this insight, we propose TransPrune, a training-free and efficient token pruning method. Specifically, TransPrune progressively prunes tokens by assessing their importance through a combination of Token Transition Variation (TTV)-which measures changes in both the magnitude and direction of token representations-and Instruction-Guided Attention (IGA), which measures how strongly the instruction attends to image tokens via attention. Extensive experiments demonstrate that TransPrune achieves comparable multimodal performance to original LVLMs, such as LLaVA-v1.5 and LLaVA-Next, across eight benchmarks, while reducing inference TFLOPs by more than half. Moreover, TTV alone can serve as an effective criterion without relying on attention, achieving performance comparable to attention-based methods. The code will be made publicly available upon acceptance of the paper at https://github.com/liaolea/TransPrune.

Zhengxiao He, Huayu Li, Geng Yuan et al.

Methods: We developed a self-supervised deep learning model that extracts meaningful patterns from multi-modal signals (Electroencephalography (EEG), Electrocardiography (ECG), and respiratory signals). The model was trained on data from 4,398 participants. Projection scores were derived by contrasting embeddings from individuals with and without CVD outcomes. External validation was conducted in an independent cohort with 1,093 participants. The source code is available on https://github.com/miraclehetech/sleep-ssl. Results: The projection scores revealed distinct and clinically meaningful patterns across modalities. ECG-derived features were predictive of both prevalent and incident cardiac conditions, particularly CVD mortality. EEG-derived features were predictive of incident hypertension and CVD mortality. Respiratory signals added complementary predictive value. Combining these projection scores with the Framingham Risk Score consistently improved predictive performance, achieving area under the curve values ranging from 0.607 to 0.965 across different outcomes. Findings were robustly replicated and validated in the external testing cohort. Conclusion: Our findings demonstrate that the proposed framework can generate individualized CVD risk scores directly from PSG data. The resulting projection scores have the potential to be integrated into clinical practice, enhancing risk assessment and supporting personalized care.

Yixuan Zhu, Wenliang Zhao, Ao Li et al.

Image enhancement holds extensive applications in real-world scenarios due to complex environments and limitations of imaging devices. Conventional methods are often constrained by their tailored models, resulting in diminished robustness when confronted with challenging degradation conditions. In response, we propose FlowIE, a simple yet highly effective flow-based image enhancement framework that estimates straight-line paths from an elementary distribution to high-quality images. Unlike previous diffusion-based methods that suffer from long-time inference, FlowIE constructs a linear many-to-one transport mapping via conditioned rectified flow. The rectification straightens the trajectories of probability transfer, accelerating inference by an order of magnitude. This design enables our FlowIE to fully exploit rich knowledge in the pre-trained diffusion model, rendering it well-suited for various real-world applications. Moreover, we devise a faster inference algorithm, inspired by Lagrange's Mean Value Theorem, harnessing midpoint tangent direction to optimize path estimation, ultimately yielding visually superior results. Thanks to these designs, our FlowIE adeptly manages a diverse range of enhancement tasks within a concise sequence of fewer than 5 steps. Our contributions are rigorously validated through comprehensive experiments on synthetic and real-world datasets, unveiling the compelling efficacy and efficiency of our proposed FlowIE. Code is available at https://github.com/EternalEvan/FlowIE.

Ao Li, Zongfang Liu, Xinhua Li et al.

Large pre-trained vision-language models (VLMs) offer a promising approach to leveraging human language for enhancing downstream tasks. However, VLMs such as CLIP face significant limitation: its performance is highly sensitive to prompt template design. Although prompt learning methods can address the sensitivity issue by replacing natural language prompts with learnable ones, they are incomprehensible to humans. Ensuring consistent performance across various prompt templates enables models to adapt seamlessly to diverse phrasings, enhancing their ability to handle downstream tasks without requiring extensive prompt engineering. In this work, we introduce the RobustPrompt Benchmark, a systematic benchmark to evaluate robustness to different prompt templates for VLMs. It includes a dataset with hundreds of carefully designed prompt templates, divided into six types, covering a wide variety of commonly used templates. Beside the benchmark, we propose Modeling Variants of Prompts (MVP), a simple yet effective method that mitigates sensitivity by modeling variants of prompt structures. The innovation of MVP lies in decoupling prompts into templates and class names, and using Variational Autoencoders (VAE) to model the distribution of diverse prompt structures. Experiments across 11 datasets demonstrate that MVP can greatly enhance model robustness to variations in input prompts without a drop in performance. The code is available at https://github.com/liaolea/MVP.

Ao Li, Xiaoning Liu, Sheng Li et al.

All-in-one image restoration aims to handle diverse degradations within a single model. However, existing methods often suffer from three key limitations: 1) per-input computational overhead from dynamic degradation estimation; 2) optimization challenges due to task heterogeneity; and 3) inefficient, frequency-agnostic encoder designs. To overcome these, we introduce the Dynamic Reparameterization Network (DRNet), a novel framework operating on an initialization-stage reconfiguration paradigm that fundamentally eliminates per-input overhead. At its core, a Dynamic Reparameterization MLP (DRMLP) guided by a Task-Specific Modulator (TSM), which effectively mitigates task heterogeneity by orchestrating both specific restoration goals and a versatile general-purpose mode within a unified architecture. Furthermore, we incorporate a Continuous Wavelet Transform Encoder (CWTE) that explicitly leverages frequency characteristics via wavelet decomposition for a lightweight yet powerful design. Extensive experiments demonstrate that DRNet achieves state-of-the-art performance across five restoration tasks with superior parameter efficiency. Crucially, it showcases unique flexibility, excelling as both a highly competitive foundation model for blind restoration and a top-performing user-guided specialist.

Xiaoning Liu, Zongwei Wu, Ao Li et al.

This paper reviews the NTIRE 2024 low light image enhancement challenge, highlighting the proposed solutions and results. The aim of this challenge is to discover an effective network design or solution capable of generating brighter, clearer, and visually appealing results when dealing with a variety of conditions, including ultra-high resolution (4K and beyond), non-uniform illumination, backlighting, extreme darkness, and night scenes. A notable total of 428 participants registered for the challenge, with 22 teams ultimately making valid submissions. This paper meticulously evaluates the state-of-the-art advancements in enhancing low-light images, reflecting the significant progress and creativity in this field.

Guoxiao Zhang, Tan Qu, Ao Li et al.

Reranking improves recommendation quality by modeling item interactions. However, existing methods often decouple ranking and reranking, leading to weak listwise evaluation models that suffer from combinatorial sparsity and limited representational power under strict latency constraints. In this paper, we propose RIA (Ranking-Infused Architecture), a unified, end-to-end framework that seamlessly integrates pointwise and listwise evaluation. RIA introduces four key components: (1) the User and Candidate DualTransformer (UCDT) for fine-grained user-item-context modeling; (2) the Context-aware User History and Target (CUHT) module for position-sensitive preference learning; (3) the Listwise Multi-HSTU (LMH) module to capture hierarchical item dependencies; and (4) the Embedding Cache (EC) module to bridge efficiency and effectiveness during inference. By sharing representations across ranking and reranking, RIA enables rich contextual knowledge transfer while maintaining low latency. Extensive experiments show that RIA outperforms state-of-the-art models on both public and industrial datasets, achieving significant gains in AUC and LogLoss. Deployed in Meituan advertising system, RIA yields a +1.69% improvement in Click-Through Rate (CTR) and a +4.54% increase in Cost Per Mille (CPM) in online A/B tests.

Guoxiao Zhang, Ao Li, Tan Qu et al.

Online platforms usually suffer from user experience degradation due to near-duplicate items with similar visuals and text. While Multimodal Large Language Models (MLLMs) enable multimodal embedding, existing methods treat representations as black boxes, ignoring structural relationships (e.g., primary vs. auxiliary elements), leading to local structural collapse problem. To address this, inspired by Feature Integration Theory (FIT), we propose FITRep, the first attention-guided, white-box item representation framework for fine-grained item deduplication. FITRep consists of: (1) Concept Hierarchical Information Extraction (CHIE), using MLLMs to extract hierarchical semantic concepts; (2) Structure-Preserving Dimensionality Reduction (SPDR), an adaptive UMAP-based method for efficient information compression; and (3) FAISS-Based Clustering (FBC), a FAISS-based clustering that assigns each item a unique cluster id using FAISS. Deployed on Meituan's advertising system, FITRep achieves +3.60% CTR and +4.25% CPM gains in online A/B tests, demonstrating both effectiveness and real-world impact.

Yuxiang Duan, Ao Li, Yingqin Li et al.

Multimodal large language models (MLLMs) have shown remarkable capabilities in a wide range of vision-language tasks. However, the large number of visual tokens introduces significant computational overhead. To address this issue, visual token pruning has emerged as a key technique for enhancing the efficiency of MLLMs. In cognitive science, humans tend to first determine which regions of a scene to attend to ("where to look") before deciding which specific elements within those regions to process in detail ("what to select"). This two-stage strategy enables the visual system to efficiently allocate attention at a coarse spatial level before performing fine-grained selection. However, existing pruning methods primarily focus on directly optimizing "what to select", typically using attention scores or similarity metrics. They rarely consider "where to look", which has been shown to lead to inefficient spatial allocation, positional bias, and the retention of irrelevant or redundant tokens. In this paper, we propose GridPrune, a method that replaces the global Top-K mechanism with a "guide-globally, select-locally" zonal selection system. GridPrune splits the pruning process into two steps: first, it uses text-conditional guidance to dynamically allocate a token budget across spatial zones; and then, it performs local selection within each budgeted zone. Experimental results demonstrate that GridPrune achieves superior performance across various MLLM architectures. On LLaVA-NeXT-7B, GridPrune retains 96.98% of the full performance while using 11.1% of the tokens, outperforming the best-performing baseline by 2.34% at the same pruning rate.

Xiangrui Liu, Yan Shu, Zheng Liu et al.

Despite advanced token compression techniques, existing multimodal large language models (MLLMs) still struggle with hour-long video understanding. In this work, we propose Video-XL-Pro, an efficient method for extremely long video understanding, built upon Reconstructive Compression of Tokens (ReCoT), a learnable module that leverages self-supervised learning to generate comprehensive and compact video tokens. ReCoT introduces two key components: (i) Dynamic Token Synthesizer (DTS): DTS generates pseudo-video tokens from static image tokens by learning intra-token relationships, which are then used in masked video modeling. (ii) Semantic-Guided Masking (SGM): SGM adaptively masks redundant visual tokens to facilitate more effective reconstructive learning. To improve training efficiency in MLLMs fine-tuning, we introduce a video-specific dataset pruning strategy and design a simple yet Query-aware Selector that enables the model to precisely locate query-relevant video tokens. With only 3B parameters, Video-XL-Pro outperforms most 7B models trained on larger datasets across multiple long video understanding benchmarks. Moreover, it can process over 8K frames on a single A100 GPU while maintaining high-quality performance.

ZhengXiao He, Huayu Li, Xiwen Chen et al.

Medical time series, such as electrocardiograms (ECG) and electroencephalograms (EEG), exhibit complex temporal dynamics and structured cross-channel dependencies, posing fundamental challenges for automated analysis. Conventional convolutional and recurrent models struggle to capture long-range dependencies, while Transformer-based approaches incur quadratic complexity and often introduce redundant interactions that are misaligned with the intrinsic structure of physiological signals. To address these limitations, we propose MedMamba, a principle-driven multi-scale bidirectional state space architecture tailored for medical time series classification. Our design is guided by three key inductive biases of physiological signals: spatial centralization, multi-timescale temporal composition, and non-causal contextual dependency. These principles are instantiated through a lightweight channel-mixing module for cross-channel reparameterization, multi-scale convolutional tokenization for temporal decomposition, and bidirectional Mamba blocks for efficient global context modeling with linear complexity. Extensive experiments on six benchmark datasets spanning EEG, ECG, and human activity signals demonstrate that MedMamba consistently outperforms state-of-the-art methods across diverse modalities. Notably, it achieves 85.97% accuracy on PTB and establishes new state-of-the-art performance on the challenging ADFTD dataset (54.72% accuracy and 52.01% F1-score). Strong results on long-sequence benchmarks, such as SleepEDF, further validate its capability in modeling long-range dependencies. Moreover, MedMamba achieves a speedup of 4.6x in inference, highlighting its practicality for real-time clinical deployment. These results suggest that principle-guided state space modeling offers an effective and scalable alternative to Transformer-based approaches for medical time series analysis.

Xiaoning Liu, Zongwei Wu, Florin-Alexandru Vasluianu et al.

This paper presents a comprehensive review of the NTIRE 2025 Low-Light Image Enhancement (LLIE) Challenge, highlighting the proposed solutions and final outcomes. The objective of the challenge is to identify effective networks capable of producing brighter, clearer, and visually compelling images under diverse and challenging conditions. A remarkable total of 762 participants registered for the competition, with 28 teams ultimately submitting valid entries. This paper thoroughly evaluates the state-of-the-art advancements in LLIE, showcasing the significant progress.

Huayu Li, ZhengXiao He, Xiwen Chen et al.

Learning meaningful representations from medical time series (MedTS) such as ECG or EEG signals is a critical challenge. These signals are often high-dimensional, variable-length and rife with noise. Existing self-supervised approaches, such as Masked Autoencoders (MAEs) are highly effective for pre-training general-purpose encoders. However, they do not explicitly learn compact and semantically interpretable latent representations, typically relying on heuristic aggregation strategies such as global average pooling or a designated [CLS] token. We propose a novel framework that compresses a variable-length MedTS into a fixed-size set of $k$ latent Fingerprint Tokens. Our architecture employs a cross-attention bottleneck to generate these tokens and is trained with a dual-objective function. The first objective is a reconstruction loss, which ensures the tokens are \textit{sufficient statistics} for the original data. The second, a diversity penalty based on the Total Coding Rate (TCR), explicitly minimizes the redundancy between tokens, encouraging them to become statistically \textit{disentangled} representations. We present the theoretical justification for our method, framing it as a novel \textbf{Disentangled Rate-Distortion} problem. This approach produces a low-dimensional, interpretable, and sample-efficient representation, where each token is encouraged to capture an independent factor of variation, paving the way for more robust digital biomarkers.

Yixuan Zhu, Ao Li, Yansong Tang et al.

The recovery of occluded human meshes presents challenges for current methods due to the difficulty in extracting effective image features under severe occlusion. In this paper, we introduce DPMesh, an innovative framework for occluded human mesh recovery that capitalizes on the profound diffusion prior about object structure and spatial relationships embedded in a pre-trained text-to-image diffusion model. Unlike previous methods reliant on conventional backbones for vanilla feature extraction, DPMesh seamlessly integrates the pre-trained denoising U-Net with potent knowledge as its image backbone and performs a single-step inference to provide occlusion-aware information. To enhance the perception capability for occluded poses, DPMesh incorporates well-designed guidance via condition injection, which produces effective controls from 2D observations for the denoising U-Net. Furthermore, we explore a dedicated noisy key-point reasoning approach to mitigate disturbances arising from occlusion and crowded scenarios. This strategy fully unleashes the perceptual capability of the diffusion prior, thereby enhancing accuracy. Extensive experiments affirm the efficacy of our framework, as we outperform state-of-the-art methods on both occlusion-specific and standard datasets. The persuasive results underscore its ability to achieve precise and robust 3D human mesh recovery, particularly in challenging scenarios involving occlusion and crowded scenes.

Xuzheng He, Nan Nan, Zhilin Wang et al.

Generating symphonic music requires simultaneously managing high-level structural form and dense, multi-track orchestration. Existing symbolic models often struggle with a "complexity-control imbalance", in which scaling bottlenecks limit long-term granular steerability. We present SymphonyGen, a 3D hierarchical framework for contemporary cinematic orchestration. SymphonyGen employs a cascading decoder architecture that decomposes the Bar, Track, and Event axes, improving computational efficiency and scalability over conventional 1D or 2D models. We introduce "short-score" conditioning via a beat-quantized multi-voice harmony skeleton, enabling outline control while preserving textural diversity. The model is further refined using Group Relative Policy Optimization (GRPO) with a cross-modal audio-perceptual reward, aligning symbolic output with modern acoustic expectations. Additionally, we implement a dissonance-averse sampling algorithm to suppress unintended tonal clashes during inference. Objective evaluations show that both reinforcement learning and dissonance-averse sampling effectively enhance harmonic cleanliness while maintaining melodic expression. Subjective evaluations demonstrate that SymphonyGen outperforms baselines in musicality and preference for orchestral music generation. Demo page: https://symphonygen.github.io/

Yixuan Zhu, Shilin Ma, Haolin Wang et al.

Recent advancements in visual autoregressive models (VAR) have demonstrated their effectiveness in image generation, highlighting their potential for real-world image super-resolution (Real-ISR). However, adapting VAR for ISR presents critical challenges. The next-scale prediction mechanism, constrained by causal attention, fails to fully exploit global low-quality (LQ) context, resulting in blurry and inconsistent high-quality (HQ) outputs. Additionally, error accumulation in the iterative prediction severely degrades coherence in ISR task. To address these issues, we propose VARestorer, a simple yet effective distillation framework that transforms a pre-trained text-to-image VAR model into a one-step ISR model. By leveraging distribution matching, our method eliminates the need for iterative refinement, significantly reducing error propagation and inference time. Furthermore, we introduce pyramid image conditioning with cross-scale attention, which enables bidirectional scale-wise interactions and fully utilizes the input image information while adapting to the autoregressive mechanism. This prevents later LQ tokens from being overlooked in the transformer. By fine-tuning only 1.2\% of the model parameters through parameter-efficient adapters, our method maintains the expressive power of the original VAR model while significantly enhancing efficiency. Extensive experiments show that VARestorer achieves state-of-the-art performance with 72.32 MUSIQ and 0.7669 CLIPIQA on DIV2K dataset, while accelerating inference by 10 times compared to conventional VAR inference.

Ao Li, Wei Fang, Hongbo Zhao et al.

In applications of diffusion models, controllable generation is of practical significance, but is also challenging. Current methods for controllable generation primarily focus on modifying the score function of diffusion models, while Mean Reverting (MR) Diffusion directly modifies the structure of the stochastic differential equation (SDE), making the incorporation of image conditions simpler and more natural. However, current training-free fast samplers are not directly applicable to MR Diffusion. And thus MR Diffusion requires hundreds of NFEs (number of function evaluations) to obtain high-quality samples. In this paper, we propose a new algorithm named MaRS (MR Sampler) to reduce the sampling NFEs of MR Diffusion. We solve the reverse-time SDE and the probability flow ordinary differential equation (PF-ODE) associated with MR Diffusion, and derive semi-analytical solutions. The solutions consist of an analytical function and an integral parameterized by a neural network. Based on this solution, we can generate high-quality samples in fewer steps. Our approach does not require training and supports all mainstream parameterizations, including noise prediction, data prediction and velocity prediction. Extensive experiments demonstrate that MR Sampler maintains high sampling quality with a speedup of 10 to 20 times across ten different image restoration tasks. Our algorithm accelerates the sampling procedure of MR Diffusion, making it more practical in controllable generation.

Xiaoning Liu, Ao Li, Zongwei Wu et al.

Leveraging Transformer attention has led to great advancements in HDR deghosting. However, the intricate nature of self-attention introduces practical challenges, as existing state-of-the-art methods often demand high-end GPUs or exhibit slow inference speeds, especially for high-resolution images like 2K. Striking an optimal balance between performance and latency remains a critical concern. In response, this work presents PASTA, a novel Progressively Aggregated Spatio-Temporal Alignment framework for HDR deghosting. Our approach achieves effectiveness and efficiency by harnessing hierarchical representation during feature distanglement. Through the utilization of diverse granularities within the hierarchical structure, our method substantially boosts computational speed and optimizes the HDR imaging workflow. In addition, we explore within-scale feature modeling with local and global attention, gradually merging and refining them in a coarse-to-fine fashion. Experimental results showcase PASTA's superiority over current SOTA methods in both visual quality and performance metrics, accompanied by a substantial 3-fold (x3) increase in inference speed.

Huayu Li, Zhengxiao He, Xiwen Chen et al.

Large language models (LLMs) have shown promising capabilities in visually interpreting medical time-series data. However, their general-purpose design can limit domain-specific precision, and the proprietary nature of many models poses challenges for fine-tuning on specialized clinical datasets. Conversely, small specialized models (SSMs) offer strong performance on focused tasks but lack the broader reasoning needed for complex medical decision-making. To address these complementary limitations, we introduce \ConMIL{} (Conformalized Multiple Instance Learning), a novel decision-support framework distinctively synergizes three key components: (1) a new Multiple Instance Learning (MIL) mechanism, QTrans-Pooling, designed for per-class interpretability in identifying clinically relevant physiological signal segments; (2) conformal prediction, integrated with MIL to generate calibrated, set-valued outputs with statistical reliability guarantees; and (3) a structured approach for these interpretable and uncertainty-quantified SSM outputs to enhance the visual inspection capabilities of LLMs. Our experiments on arrhythmia detection and sleep stage classification demonstrate that \ConMIL{} can enhance the accuracy of LLMs such as ChatGPT4.0, Qwen2-VL-7B, and MiMo-VL-7B-RL. For example, \ConMIL{}-supported Qwen2-VL-7B and MiMo-VL-7B-RL both achieves 94.92% and 96.82% precision on confident samples and (70.61% and 78.02%)/(78.10% and 71.98%) on uncertain samples for the two tasks, compared to 46.13% and 13.16% using the LLM alone. These results suggest that integrating task-specific models with LLMs may offer a promising pathway toward more interpretable and trustworthy AI-driven clinical decision support.

Long Deng, Ziqiang Li, Bingxin Zhou et al.

Although few-shot action recognition based on metric learning paradigm has achieved significant success, it fails to address the following issues: (1) inadequate action relation modeling and underutilization of multi-modal information; (2) challenges in handling video matching problems with different lengths and speeds, and video matching problems with misalignment of video sub-actions. To address these issues, we propose a Two-Stream Joint Matching method based on contrastive learning (TSJM), which consists of two modules: Multi-modal Contrastive Learning Module (MCL) and Joint Matching Module (JMM). The objective of the MCL is to extensively investigate the inter-modal mutual information relationships, thereby thoroughly extracting modal information to enhance the modeling of action relationships. The JMM aims to simultaneously address the aforementioned video matching problems. The effectiveness of the proposed method is evaluated on two widely used few shot action recognition datasets, namely, SSv2 and Kinetics. Comprehensive ablation experiments are also conducted to substantiate the efficacy of our proposed approach.

Senyu Fei, Siyin Wang, Li Ji et al.

Vision-Language-Action (VLA) models excel in robotic manipulation but are constrained by their heavy reliance on expert demonstrations, leading to demonstration bias and limiting performance. Reinforcement learning (RL) is a vital post-training strategy to overcome these limits, yet current VLA-RL methods, including group-based optimization approaches, are crippled by severe reward sparsity. Relying on binary success indicators wastes valuable information in failed trajectories, resulting in low training efficiency. To solve this, we propose Self-Referential Policy Optimization (SRPO), a novel VLA-RL framework. SRPO eliminates the need for external demonstrations or manual reward engineering by leveraging the model's own successful trajectories, generated within the current training batch, as a self-reference. This allows us to assign a progress-wise reward to failed attempts. A core innovation is the use of latent world representations to measure behavioral progress robustly. Instead of relying on raw pixels or requiring domain-specific fine-tuning, we utilize the compressed, transferable encodings from a world model's latent space. These representations naturally capture progress patterns across environments, enabling accurate, generalized trajectory comparison. Empirical evaluations on the LIBERO benchmark demonstrate SRPO's efficiency and effectiveness. Starting from a supervised baseline with 48.9% success, SRPO achieves a new state-of-the-art success rate of 99.2% in just 200 RL steps, representing a 103% relative improvement without any extra supervision. Furthermore, SRPO shows substantial robustness, achieving a 167% performance improvement on the LIBERO-Plus benchmark.

Ci Zhang, Huayu Li, Changdi Yang et al.

Recent studies show that using diffusion models for time series signal reconstruction holds great promise. However, such approaches remain largely unexplored in the domain of medical time series. The unique characteristics of the physiological time series signals, such as multivariate, high temporal variability, highly noisy, and artifact-prone, make deep learning-based approaches still challenging for tasks such as imputation. Hence, we propose a novel Mixture of Experts (MoE)-based noise estimator within a score-based diffusion framework. Specifically, the Receptive Field Adaptive MoE (RFAMoE) module is designed to enable each channel to adaptively select desired receptive fields throughout the diffusion process. Moreover, recent literature has found that when generating a physiological signal, performing multiple inferences and averaging the reconstructed signals can effectively reduce reconstruction errors, but at the cost of significant computational and latency overhead. We design a Fusion MoE module and innovatively leverage the nature of MoE module to generate K noise signals in parallel, fuse them using a routing mechanism, and complete signal reconstruction in a single inference step. This design not only improves performance over previous methods but also eliminates the substantial computational cost and latency associated with multiple inference processes. Extensive results demonstrate that our proposed framework consistently outperforms diffusion-based SOTA works on different tasks and datasets.