Tomislav Dragicevic

Pere Izquierdo Gomez, Miguel E. Lopez Gajardo, Nenad Mijatovic et al.

Ensuring the reliability of power electronic converters is a matter of great importance, and data-driven condition monitoring techniques are cementing themselves as an important tool for this purpose. However, translating methods that work well in controlled lab environments to field applications presents significant challenges, notably because of the limited diversity and accuracy of the lab training data. By enabling the use of field data, online machine learning can be a powerful tool to overcome this problem, but it introduces additional challenges in ensuring the stability and predictability of the training processes. This work presents an edge computing method that mitigates these shortcomings with minimal additional memory usage, by employing an autonomous algorithm that prioritizes the storage of training samples with larger prediction errors. The method is demonstrated on the use case of a self-commissioning condition monitoring system, in the form of a thermal anomaly detection scheme for a variable frequency motor drive, where the algorithm self-learned to distinguish normal and anomalous operation with minimal prior knowledge. The obtained results, based on experimental data, show a significant improvement in prediction accuracy and training speed, when compared to equivalent models trained online without the proposed data selection process.

Adrian Villalobos, Iban Barrutia, Rafael Pena-Alzola et al.

Semiconductor devices, especially MOSFETs (Metal-oxide-semiconductor field-effect transistor), are crucial in power electronics, but their reliability is affected by aging processes influenced by cycling and temperature. The primary aging mechanism in discrete semiconductors and power modules is the bond wire lift-off, caused by crack growth due to thermal fatigue. The process is empirically characterized by exponential growth and an abrupt end of life, making long-term aging forecasts challenging. This research presents a comprehensive comparative assessment of different forecasting methods for MOSFET failure forecasting applications. Classical tracking, statistical forecasting and Neural Network (NN) based forecasting models are implemented along with novel Temporal Fusion Transformers (TFTs). A comprehensive comparison is performed assessing their MOSFET ageing forecasting ability for different forecasting horizons. For short-term predictions, all algorithms result in acceptable results, with the best results produced by classical NN forecasting models at the expense of higher computations. For long-term forecasting, only the TFT is able to produce valid outcomes owing to the ability to integrate covariates from the expected future conditions. Additionally, TFT attention points identify key ageing turning points, which indicate new failure modes or accelerated ageing phases.

Ihab S. Mohamed, Stefano Rovetta, Ton Duc Do et al.

Model predictive control (MPC) has become one of the well-established modern control methods for three-phase inverters with an output LC filter, where a high-quality voltage with low total harmonic distortion (THD) is needed. Although it is an intuitive controller, easy to understand and implement, it has the significant disadvantage of requiring a large number of online calculations for solving the optimization problem. On the other hand, the application of model-free approaches such as those based on artificial neural networks approaches is currently growing rapidly in the area of power electronics and drives. This paper presents a new control scheme for a two-level converter based on combining MPC and feed-forward ANN, with the aim of getting lower THD and improving the steady and dynamic performance of the system for different types of loads. First, MPC is used, as an expert, in the training phase to generate data required for training the proposed neural network. Then, once the neural network is fine-tuned, it can be successfully used online for voltage tracking purpose, without the need of using MPC. The proposed ANN-based control strategy is validated through simulation, using MATLAB/Simulink tools, taking into account different loads conditions. Moreover, the performance of the ANN-based controller is evaluated, on several samples of linear and non-linear loads under various operating conditions, and compared to that of MPC, demonstrating the excellent steady-state and dynamic performance of the proposed ANN-based control strategy.

Ernane A. Alves Coelho, Dan Wu, Josep M. Guerrero et al.

This paper presents a small-signal analysis of an islanded microgrid composed of two or more voltage source inverters connected in parallel. The primary control of each inverter is integrated through internal current and voltage loops using PR compensators, a virtual impedance, and an external power controller based on frequency and voltage droops. The frequency restoration function is implemented at the secondary control level, which executes a consensus algorithm that consists of a load-frequency control and a single time delay communication network. The consensus network consists of a time-invariant directed graph and the output power of each inverter is the information shared among the units, which is affected by the time delay. The proposed small-signal model is validated through simulation results and experimental results. A root locus analysis is presented that shows the behavior of the system considering control parameters and time delay variation.