Yunfan Ren

Chunran Zheng, Wei Xu, Zuhao Zou et al.

This paper proposes FAST-LIVO2: a fast, direct LiDAR-inertial-visual odometry framework to achieve accurate and robust state estimation in SLAM tasks and provide great potential in real-time, onboard robotic applications. FAST-LIVO2 fuses the IMU, LiDAR and image measurements efficiently through an ESIKF. To address the dimension mismatch between the heterogeneous LiDAR and image measurements, we use a sequential update strategy in the Kalman filter. To enhance the efficiency, we use direct methods for both the visual and LiDAR fusion, where the LiDAR module registers raw points without extracting edge or plane features and the visual module minimizes direct photometric errors without extracting ORB or FAST corner features. The fusion of both visual and LiDAR measurements is based on a single unified voxel map where the LiDAR module constructs the geometric structure for registering new LiDAR scans and the visual module attaches image patches to the LiDAR points. To enhance the accuracy of image alignment, we use plane priors from the LiDAR points in the voxel map (and even refine the plane prior) and update the reference patch dynamically after new images are aligned. Furthermore, to enhance the robustness of image alignment, FAST-LIVO2 employs an on-demanding raycast operation and estimates the image exposure time in real time. Lastly, we detail three applications of FAST-LIVO2: UAV onboard navigation demonstrating the system's computation efficiency for real-time onboard navigation, airborne mapping showcasing the system's mapping accuracy, and 3D model rendering (mesh-based and NeRF-based) underscoring the suitability of our reconstructed dense map for subsequent rendering tasks. We open source our code, dataset and application on GitHub to benefit the robotics community.

Fangcheng Zhu, Yunfan Ren, Fu Zhang

For most LiDAR-inertial odometry, accurate initial states, including temporal offset and extrinsic transformation between LiDAR and 6-axis IMUs, play a significant role and are often considered as prerequisites. However, such information may not be always available in customized LiDAR-inertial systems. In this paper, we propose LI-Init: a full and real-time LiDAR-inertial system initialization process that calibrates the temporal offset and extrinsic parameter between LiDARs and IMUs, and also the gravity vector and IMU bias by aligning the state estimated from LiDAR measurements with that measured by IMU. We implement the proposed method as an initialization module, which, if enabled, automatically detects the degree of excitation of the collected data and calibrate, on-the-fly, the temporal offset, extrinsic, gravity vector, and IMU bias, which are then used as high-quality initial state values for real-time LiDAR-inertial odometry systems. Experiments conducted with different types of LiDARs and LiDAR-inertial combinations show the robustness, adaptability and efficiency of our initialization method. The implementation of our LiDAR-inertial initialization procedure LI-Init and test data are open-sourced on Github and also integrated into a state-of-the-art LiDAR-inertial odometry system FAST-LIO2.

Yunfan Ren, Fangcheng Zhu, Wenyi Liu et al.

Quadrotors are agile platforms. With human experts, they can perform extremely high-speed flights in cluttered environments. However, fully autonomous flight at high speed remains a significant challenge. In this work, we propose a motion planning algorithm based on the corridor-constrained minimum control effort trajectory optimization (MINCO) framework. Specifically, we use a series of overlapping spheres to represent the free space of the environment and propose two novel designs that enable the algorithm to plan high-speed quadrotor trajectories in real-time. One is a sampling-based corridor generation method that generates spheres with large overlapped areas (hence overall corridor size) between two neighboring spheres. The second is a Receding Horizon Corridors (RHC) strategy, where part of the previously generated corridor is reused in each replan. Together, these two designs enlarge the corridor spaces in accordance with the quadrotor's current state and hence allow the quadrotor to maneuver at high speeds. We benchmark our algorithm against other state-of-the-art planning methods to show its superiority in simulation. Comprehensive ablation studies are also conducted to show the necessity of the two designs. The proposed method is finally evaluated on an autonomous LiDAR-navigated quadrotor UAV in woods environments, achieving flight speeds over 13.7 m/s without any prior map of the environment or external localization facility.