Omkar Kokane

Omkar Kokane, Prabhat Sati, Mukul Lokhande et al.

This paper presents the Hybrid Overestimating Approximate Adder designed to enhance the performance in processing engines, specifically focused on edge AI applications. A novel Plus One Adder design is proposed as an incremental adder in the RCA chain, incorporating a Full Adder with an excess 1 alongside inputs A, B, and Cin. The design approximates outputs to 2 bit values to reduce hardware complexity and improve resource efficiency. The Plus One Adder is integrated into a dynamically reconfigurable HOAA, allowing runtime interchangeability between accurate and approximate overestimation modes. The proposed design is demonstrated for multiple applications, such as Twos complement subtraction and Rounding to even, and the Configurable Activation function, which are critical components of the Processing engine. Our approach shows 21 percent improvement in area efficiency and 33 percent reduction in power consumption, compared to state of the art designs with minimal accuracy loss. Thus, the proposed HOAA could be a promising solution for resource-constrained environments, offering ideal trade-offs between hardware efficiency vs computational accuracy.

Vijay Pratap Sharma, Mukul Lokhande, Ratko Pilipovic et al.

This work presents TREA, a low-precision time-multiplexed and resource-efficient edge-AI accelerator for object detection and classification, targeting stringent area-power-latency constraints of edge vision platforms. The proposed architecture integrates a dual-precision (4/8-bit) SIMD multiply-accumulate (DQ-MAC) unit based on most-significant-digit-first (MSDF) shift-and-add computation with run-time bit truncation, eliminating conventional multiplier overhead and reducing accumulator bit-width. The DQ-MAC supports 4x FxP4 or 1x FxP8 operations per cycle, achieving up to 4x throughput improvement without hardware duplication. A structured hardware-aware reductive pruning (SHARP) strategy is co-designed with the SIMD datapath, enabling near 50% structured sparsity while maintaining full MAC utilization. This allows a 3x3 convolution kernel to be computed in 1 cycle in FxP4 mode compared to 9 cycles in FxP8, and a 5x5 kernel in 3 cycles versus 25 cycles, yielding up to 9x latency reduction at the kernel level. The accelerator further incorporates a reconfigurable CORDIC-based nonlinear activation function (RQ-NAF) core with a 9-stage pipeline, supporting Sigmoid, Tanh, and ReLU at one output per cycle after pipeline fill, while enabling (N-1) hardware reuse through time-multiplexing. The complete TREA architecture employs a 1D array of 100 SIMD DQ-MAC units with layer-wise hardware reuse, significantly reducing area and control complexity. Experimental results demonstrate substantial improvements in latency, hardware utilization, and energy efficiency compared to conventional fixed-precision and non-reconfigurable accelerators, validating TREA as an effective solution for real-time edge vision workloads.

Mukul Lokhande, Ratko Pilipovic, Omkar Kokane et al.

Advanced driver-assistance systems (ADAS) require neural compute engines that deliver low-latency inference under strict power and area constraints. Posit arithmetic is attractive for such accelerators because it provides high numerical fidelity at low precision, but its variable-length regime encoding increases encode/decode cost and exposes the datapath to large regime-field fault effects. This paper presents EULER-ADAS, a SIMD-enabled logarithmic bounded-Posit neural compute engine for energyefficient and reliability-aware ADAS acceleration. The proposed datapath combines bounded-regime Posit representation, stageadaptive logarithmic mantissa multiplication with bit truncation, and a SIMD-shared quire accumulation path supporting Posit- (8,0), Posit-(16,1), and Posit-(32,2) execution. The unified architecture enables 4xPosit-8, 2xPosit-16, or 1xPosit-32 operation without duplicating precision-specific hardware. FPGA implementation shows that the proposed configurations reduce LUT count by up to 41.4%, delay by up to 76.1%, and power by up to 71.9% relative to exact Posit neural compute engines, while achieving up to 10x lower energy-delay product than radix-4 Booth-based Posit multipliers. In 28-nm CMOS, the bounded variants occupy 0.013-0.016 mm2 , consume 19.8-22.1 mW, and operate at up to 1.84 GHz. Application-level evaluation across image-classification, ADAS, and edge-inference workloads shows that the evaluated Posit-16 and Posit-32 configurations remain within about 1.5 percentage points of FP32 accuracy. A TinyYOLOv3 prototype on Pynq-Z2 achieves 78 ms latency at 0.29 W and 22.6 mJ/frame, demonstrating the suitability of EULERADAS for low-power real-time ADAS inference.

Omkar Kokane, Gopal Raut, Salim Ullah et al.

A CORDIC-based configuration for the design of Activation Functions (AF) was previously suggested to accelerate ASIC hardware design for resource-constrained systems by providing functional reconfigurability. Since its introduction, this new approach for neural network acceleration has gained widespread popularity, influencing numerous designs for activation functions in both academic and commercial AI processors. In this retrospective analysis, we explore the foundational aspects of this initiative, summarize key developments over recent years, and introduce the DA-VINCI AF tailored for the evolving needs of AI applications. This new generation of dynamically configurable and precision-adjustable activation function cores promise greater adaptability for a range of activation functions in AI workloads, including Swish, SoftMax, SeLU, and GeLU, utilizing the Shift-and-Add CORDIC technique. The previously presented design has been optimized for MAC, Sigmoid, and Tanh functionalities and incorporated into ReLU AFs, culminating in an accumulative NEURIC compute unit. These enhancements position NEURIC as a fundamental component in the resource-efficient vector engine for the realization of AI accelerators that focus on DNNs, RNNs/LSTMs, and Transformers, achieving a quality of results (QoR) of 98.5%.

Omkar Kokane, Adam Teman, Anushka Jha et al.

Artificial intelligence necessitates adaptable hardware accelerators for efficient high-throughput million operations. We present pipelined architecture with CORDIC block for linear MAC computations and nonlinear iterative Activation Functions (AF) such as $tanh$, $sigmoid$, and $softmax$. This approach focuses on a Reconfigurable Processing Engine (RPE) based systolic array, with 40\% pruning rate, enhanced throughput up to 4.64$\times$, and reduction in power and area by 5.02 $\times$ and 4.06 $\times$ at CMOS 28 nm, with minor accuracy loss. FPGA implementation achieves a reduction of up to 2.5 $\times$ resource savings and 3 $\times$ power compared to prior works. The Systolic CORDIC engine for Reconfigurability and Enhanced throughput (SYCore) deploys an output stationary dataflow with the CAESAR control engine for diverse AI workloads such as Transformers, RNNs/LSTMs, and DNNs for applications like image detection, LLMs, and speech recognition. The energy-efficient and flexible approach extends the enhanced approach for edge AI accelerators supporting emerging workloads.