Charith Perera

Yasar Majib, Mahmoud Barhamgi, Behzad Momahed Heravi et al.

Detecting anomalies at the time of happening is vital in environments like buildings and homes to identify potential cyber-attacks. This paper discussed the various mechanisms to detect anomalies as soon as they occur. We shed light on crucial considerations when building machine learning models. We constructed and gathered data from multiple self-build (DIY) IoT devices with different in-situ sensors and found effective ways to find the point, contextual and combine anomalies. We also discussed several challenges and potential solutions when dealing with sensing devices that produce data at different sampling rates and how we need to pre-process them in machine learning models. This paper also looks at the pros and cons of extracting sub-datasets based on environmental conditions.

Osian Morgan, Hakan Kayan, Charith Perera

By using low-cost microcontrollers and TinyML, we investigate the feasibility of detecting potential early warning signs of domestic violence and other anti-social behaviors within the home. We created a machine learning model to determine if a door was closed aggressively by analyzing audio data and feeding this into a convolutional neural network to classify the sample. Under test conditions, with no background noise, accuracy of 88.89\% was achieved, declining to 87.50\% when assorted background noises were mixed in at a relative volume of 0.5 times that of the sample. The model is then deployed on an Arduino Nano BLE 33 Sense attached to the door, and only begins sampling once an acceleration greater than a predefined threshold acceleration is detected. The predictions made by the model can then be sent via BLE to another device, such as a smartphone of Raspberry Pi.

Mike Middleton, Teymoor Ali, Hakan Kayan et al.

Limitations on the availability of Dynamic Vision Sensors (DVS) present a fundamental challenge to researchers of neuromorphic computer vision applications. In response, datasets have been created by the research community, but often contain a limited number of samples or scenarios. To address the lack of a comprehensive simulator of neuromorphic vision datasets, we introduce the Anomalous Neuromorphic Tool for Shapes (ANTShapes), a novel dataset simulation framework. Built in the Unity engine, ANTShapes simulates abstract, configurable 3D scenes populated by objects displaying randomly-generated behaviours describing attributes such as motion and rotation. The sampling of object behaviours, and the labelling of anomalously-acting objects, is a statistical process following central limit theorem principles. Datasets containing an arbitrary number of samples can be created and exported from ANTShapes, along with accompanying label and frame data, through the adjustment of a limited number of parameters within the software. ANTShapes addresses the limitations of data availability to researchers of event-based computer vision by allowing for the simulation of bespoke datasets to suit purposes including object recognition and localisation alongside anomaly detection.

Omar Mussa, Omer Rana, Benoît Goossens et al.

Despite the recent broad adoption of Large Language Models (LLMs) across various domains, their potential for enriching information systems in extracting and exploring Linked Data (LD) and Resource Description Framework (RDF) triplestores has not been extensively explored. This paper examines the integration of LLMs within existing systems, emphasising the enhancement of conversational user interfaces (UIs) and their capabilities for data extraction by producing more accurate SPARQL queries without the requirement for model retraining. Typically, conversational UI models necessitate retraining with the introduction of new datasets or updates, limiting their functionality as general-purpose extraction tools. Our approach addresses this limitation by incorporating LLMs into the conversational UI workflow, significantly enhancing their ability to comprehend and process user queries effectively. By leveraging the advanced natural language understanding capabilities of LLMs, our method improves RDF entity extraction within web systems employing conventional chatbots. This integration facilitates a more nuanced and context-aware interaction model, critical for handling the complex query patterns often encountered in RDF datasets and Linked Open Data (LOD) endpoints. The evaluation of this methodology shows a marked enhancement in system expressivity and the accuracy of responses to user queries, indicating a promising direction for future research in this area. This investigation not only underscores the versatility of LLMs in enhancing existing information systems but also sets the stage for further explorations into their potential applications within more specialised domains of web information systems.

Ahmed Hussein, Mahmoud Barhamgi, Massimo Vecchio et al.

Computing devices such as laptops, tablets and mobile phones have become part of our daily lives. End users increasingly know more and more information about these devices. Further, more technically savvy end users know how such devices are being built and know how to choose one over the others. However, we cannot say the same about the Internet of Things (IoT) products. Due to its infancy nature of the marketplace, end users have very little idea about IoT products. To address this issue, we developed a method, a crowdsourced peer learning activity, supported by an online platform (OLYMPUS) to enable a group of learners to learn IoT products space better. We conducted two different user studies to validate that our tool enables better IoT education. Our method guide learners to think more deeply about IoT products and their design decisions. The learning platform we developed is open source and available for the community.

Charith Perera, Ciaran McCormick, Arosha K. Bandara et al.

The Internet of Things (IoT) systems are designed and developed either as standalone applications from the ground-up or with the help of IoT middleware platforms. They are designed to support different kinds of scenarios, such as smart homes and smart cities. Thus far, privacy concerns have not been explicitly considered by IoT applications and middleware platforms. This is partly due to the lack of systematic methods for designing privacy that can guide the software development process in IoT. In this paper, we propose a set of guidelines, a privacy-by-design framework, that can be used to assess privacy capabilities and gaps of existing IoT applications as well as middleware platforms. We have evaluated two open source IoT middleware platforms, namely OpenIoT and Eclipse SmartHome, to demonstrate how our framework can be used in this way.

Kwabena Adu-Duodu, Stanly Wilson, Yinhao Li et al.

Efficient management of end-of-life (EoL) products is critical for advancing circularity in supply chains, particularly within the construction industry where EoL strategies are hindered by heterogenous lifecycle data and data silos. Current tools like Environmental Product Declarations (EPDs) and Digital Product Passports (DPPs) are limited by their dependency on seamless data integration and interoperability which remain significant challenges. To address these, we present the Circular Construction Product Ontology (CCPO), an applied framework designed to overcome semantic and data heterogeneity challenges in EoL decision-making for construction products. CCPO standardises vocabulary and facilitates data integration across supply chain stakeholders enabling lifecycle assessments (LCA) and robust decision-making. By aggregating disparate data into a unified product provenance, CCPO enables automated EoL recommendations through customisable SWRL rules aligned with European standards and stakeholder-specific circularity SLAs, demonstrating its scalability and integration capabilities. The adopted circular product scenario depicts CCPO's application while competency question evaluations show its superior performance in generating accurate EoL suggestions highlighting its potential to greatly improve decision-making in circular supply chains and its applicability in real-world construction environments.

Hakan Kayan, Matthew Nunes, Omer Rana et al.

Industrial cyber-physical systems (ICPSs) manage critical infrastructures by controlling the processes based on the "physics" data gathered by edge sensor networks. Recent innovations in ubiquitous computing and communication technologies have prompted the rapid integration of highly interconnected systems to ICPSs. Hence, the "security by obscurity" principle provided by air-gapping is no longer followed. As the interconnectivity in ICPSs increases, so does the attack surface. Industrial vulnerability assessment reports have shown that a variety of new vulnerabilities have occurred due to this transition while the most common ones are related to weak boundary protection. Although there are existing surveys in this context, very little is mentioned regarding these reports. This paper bridges this gap by defining and reviewing ICPSs from a cybersecurity perspective. In particular, multi-dimensional adaptive attack taxonomy is presented and utilized for evaluating real-life ICPS cyber incidents. We also identify the general shortcomings and highlight the points that cause a gap in existing literature while defining future research directions.

Lamya Alkhariji, Nada Alhirabi, Mansour Naser Alraja et al.

Privacy by Design (PbD) is the most common approach followed by software developers who aim to reduce risks within their application designs, yet it remains commonplace for developers to retain little conceptual understanding of what is meant by privacy. A vision is to develop an intelligent privacy assistant to whom developers can easily ask questions in order to learn how to incorporate different privacy-preserving ideas into their IoT application designs. This paper lays the foundations toward developing such a privacy assistant by synthesising existing PbD knowledge so as to elicit requirements. It is believed that such a privacy assistant should not just prescribe a list of privacy-preserving ideas that developers should incorporate into their design. Instead, it should explain how each prescribed idea helps to protect privacy in a given application design context-this approach is defined as 'Explainable Privacy'. A total of 74 privacy patterns were analysed and reviewed using ten different PbD schemes to understand how each privacy pattern is built and how each helps to ensure privacy. Due to page limitations, we have presented a detailed analysis in [3]. In addition, different real-world Internet of Things (IoT) use-cases, including a healthcare application, were used to demonstrate how each privacy pattern could be applied to a given application design. By doing so, several knowledge engineering requirements were identified that need to be considered when developing a privacy assistant. It was also found that, when compared to other IoT application domains, privacy patterns can significantly benefit healthcare applications. In conclusion, this paper identifies the research challenges that must be addressed if one wishes to construct an intelligent privacy assistant that can truly augment software developers' capabilities at the design phase.

Bayan Al Muhander, Jason Wiese, Omer Rana et al.

The balance between protecting users' privacy while providing cost-effective devices that are functional and usable is a key challenge in the burgeoning Internet of Things (IoT) industry. While in traditional desktop and mobile contexts the primary user interface is a screen, in IoT screens are rare or very small, which invalidate most of the traditional approaches. We examine how end-users interact with IoT products and how those products convey information back to the users, particularly `what is going on' with regards to their data. We focus on understanding what the breadth of IoT, privacy, and ubiquitous computing literature tells us about how individuals with average technical expertise can be notified about the privacy-related information of the spaces they inhabit in an easily understandable way. In this survey, we present a review of the various methods available to notify the end-users while taking into consideration the factors that should be involved in the notification alerts within the physical domain. We identify five main factors: (1) data type, (2) data usage, (3) data storage, (4) data retention period, and (5) notification method. The survey also includes literature discussing individuals' reactions and their potentials to provide feedback about their privacy choices as a response to the received notification. The results of this survey highlight the most effective mechanisms for providing awareness of privacy and data-use-practices in the context of IoT in shared spaces.

Emad Aliwa, Omer Rana, Charith Perera et al.

As connectivity between and within vehicles increases, so does concern about safety and security. Various automotive serial protocols are used inside vehicles such as Controller Area Network (CAN), Local Interconnect Network (LIN) and FlexRay. CAN bus is the most used in-vehicle network protocol to support exchange of vehicle parameters between Electronic Control Units (ECUs). This protocol lacks security mechanisms by design and is therefore vulnerable to various attacks. Furthermore, connectivity of vehicles has made the CAN bus not only vulnerable from within the vehicle but also from outside. With the rise of connected cars, more entry points and interfaces have been introduced on board vehicles, thereby also leading to a wider potential attack surface. Existing security mechanisms focus on the use of encryption, authentication and vehicle Intrusion Detection Systems (IDS), which operate under various constrains such as low bandwidth, small frame size (e.g. in the CAN protocol), limited availability of computational resources and real-time sensitivity. We survey In-Vehicle Network (IVN) attacks which have been grouped under: direct interfaces-initiated attacks, telematics and infotainment-initiated attacks, and sensor-initiated attacks. We survey and classify current cryptographic and IDS approaches and compare these approaches based on criteria such as real time constrains, types of hardware used, changes in CAN bus behaviour, types of attack mitigation and software/ hardware used to validate these approaches. We conclude with potential mitigation strategies and research challenges for the future.

Mahmoud Barhamgi, Charith Perera, Chia-Mu Yu et al.

In modern information systems different information features, about the same individual, are often collected and managed by autonomous data collection services that may have different privacy policies. Answering many end-users' legitimate queries requires the integration of data from multiple such services. However, data integration is often hindered by the lack of a trusted entity, often called a mediator, with which the services can share their data and delegate the enforcement of their privacy policies. In this paper, we propose a flexible privacy-preserving data integration approach for answering data integration queries without the need for a trusted mediator. In our approach, services are allowed to enforce their privacy policies locally. The mediator is considered to be untrusted, and only has access to encrypted information to allow it to link data subjects across the different services. Services, by virtue of a new privacy requirement, dubbed k-Protection, limiting privacy leaks, cannot infer information about the data held by each other. End-users, in turn, have access to privacy-sanitized data only. We evaluated our approach using an example and a real dataset from the healthcare application domain. The results are promising from both the privacy preservation and the performance perspectives.

Yasar Majib, Charith Perera

Today, children are increasingly connected to the Internet and consume content and services through various means. It has been a challenge for less tech-savvy parents to protect children from harmful content and services. Internet of Things (IoT) has made the situation much worse as IoT devices allow children to connect to the Internet in novel ways (e.g., connected refrigerators, TVs, and so on). In this paper, we propose mySafeHome, an approach which utilises family dynamics to provide a more natural, and intuitive access control mechanism to protect children from harmful content and services in the context of IoT. In mySafeHome, access control dynamically adapts based on the physical distance between family members. For example, a particular type of content can only be consumed, through TV, by children if the parents are in the same room (or hearing distance). mySafeHome allows parents to assess a given content by themselves. Our approach also aims to create granular levels of access control (e.g., block / limit certain content, features, services, on certain devices when the parents are not in the vicinity). We developed a prototype using OpenHAB and several smart home devices to demonstrate the proposed approach. We believe that our approach also facilitates the creation of better relationships between family members. A demo can be viewed here: http://safehome.technology/demo.

Nada Alhirabi, Omer Rana, Charith Perera

The design and development process for the Internet of Things (IoT) applications is more complicated than that for desktop, mobile, or web applications. First, IoT applications require both software and hardware to work together across different nodes with different capabilities under different conditions. Secondly, IoT application development involves different software engineers such as desktop, web, embedded and mobile to cooperate. In addition, the development process required different software\hardware stacks to integrated together. Due to above complexities, more often non-functional requirements (such as security and privacy) tend to get ignored in IoT application development process. In this paper, we have reviewed techniques, methods and tools that are being developed to support incorporating security and privacy requirements into traditional application designs. By doing so, we aim to explore how those techniques could be applicable to the IoT domain. In this paper, we primarily focused on two different aspects: (1) design notations, models, and languages that facilitate capturing non-functional requirements (i.e., security and privacy), and (2) proactive and reactive interaction techniques that can be used to support and augment the IoT application design process. Our goal is not only to analyse past research work but also to discuss their applicability towards the IoT.

Charith Perera, Mahmoud Barhamgi, Massimo Vecchio

The design and development process for Internet of Things (IoT) applications is more complicated than for desktop, mobile, or web applications. IoT applications require both software and hardware to work together across multiple different types of nodes (e.g., microcontrollers, system-on-chips, mobile phones, miniaturised single-board computers, and cloud platforms) with different capabilities under different conditions. IoT applications typically collect and analyse personal data that can be used to derive sensitive information about individuals. Without proper privacy protections in place, IoT applications could lead to serious privacy violations. Thus far, privacy concerns have not been explicitly considered in software engineering processes when designing and developing IoT applications, partly due to a lack of tools, technologies, and guidance. This paper presents a research vision that argues the importance of developing a privacy-aware IoT application design tool to address the challenges mentioned above. This tool should not only transform IoT application designs into privacy-aware application designs but also validate and verify them. First, we outline how this proposed tool should work in practice and its core functionalities. Then, we identify research challenges and potential directions towards developing the proposed tool. We anticipate that this proposed tool will save many engineering hours which engineers would otherwise need to spend on developing privacy expertise and applying it. We also highlight the usefulness of this tool towards privacy education and privacy compliance.

Luke Jones, Charith Perera

This paper presents the designing and testing of PizzaBox, a 3D printed, interactive food ordering system that aims to differ from conventional food ordering systems and provide an entertaining and unique experience when ordering a pizza by incorporating underlying technologies that support ubiquitous computing. The PizzaBox has gone through both low and medium fidelity testing while working collaboratively with participants to co-design and refine a product that is approachable to all age groups while maintaining a simple process for ordering food from start to finish. Final testing was conducted at an independent pizzeria where interviews with participants lead us to develop four discussion themes 1) usability and end user engagement, 2) towards connected real-time products and services, 3) healthy eating, 4) evolution of food ordering systems. Our interviews show that in general, PizzaBox would have a greater appeal to a younger audience by providing a fantasy of helping in the creation and baking of the pizza but also has a novelty value that all ages would enjoy. We investigate the effect that the PizzaBox has in encouraging new healthy habits or promoting a healthier lifestyle as well as how we can improve PizzaBox to better encourage these lifestyle changes.

Rhys Beckett, Charith Perera

In this paper, we explore the potential impact of Internet of Things (IoT) technology may have on the cosplay community. We developed a costume (an IoT Skullfort) and embedded IoT technology to enhance its capabilities and user interactions. Sensing technologies are widely used in many different wearable domains including cosplay scenarios. However, in most of these scenarios, typical interaction pattern is that the costume responds to its environment or the player's behaviour (e.g., colour of lights may get changed when player moves hands). In contrast, our research focuses on exploring scenarios where the audience (third party) get to manipulate the costume behaviour (e.g., the audience get to change the colour of the Skullfort using a mobile application). We believe such an audience (third party) influenced cosplay brings new opportunities for enhanced entertainment. However, it also creates significant challenges. We report the results gathered through a focus group conducted in collaboration with cosplay community experts.

Nader Sohrabi Safa, Carsten Maple, Steve Furnell et al.

Previous studies show that information security breaches and privacy violations are important issues for organisations and people. It is acknowledged that decreasing the risk in this domain requires consideration of the technological aspects of information security alongside human aspects. Employees intentionally or unintentionally account for a significant portion of the threats to information assets in organisations. This research presents a novel conceptual framework to mitigate the risk of insiders using deterrence and prevention approaches. Deterrence factors discourage employees from engaging in information security misbehaviour in organisations, and situational crime prevention factors encourage them to prevent information security misconduct. Our findings show that perceived sanctions certainty and severity significantly influence individuals' attitudes and deter them from information security misconduct. In addition, the output revealed that increasing the effort, risk and reducing the reward (benefits of crime) influence the employees' attitudes towards prevent information security misbehaviour. However, removing excuses and reducing provocations do not significantly influence individuals' attitudes towards prevent information security misconduct. Finally, the output of the data analysis also showed that subjective norms, perceived behavioural control and attitude influence individuals' intentions, and, ultimately, their behaviour towards avoiding information security misbehaviour.

Balkis Abidi, Sadok Ben Yahia, Charith Perera

k-Anonymity by microaggregation is one of the most commonly used anonymization techniques. This success is owe to the achievement of a worth of interest tradeoff between information loss and identity disclosure risk. However, this method may have some drawbacks. On the disclosure limitation side, there is a lack of protection against attribute disclosure. On the data utility side, dealing with a real datasets is a challenging task to achieve. Indeed, the latter are characterized by their large number of attributes and the presence of noisy data, such that outliers or, even, data with missing values. Generating an anonymous individual data useful for data mining tasks, while decreasing the influence of noisy data is a compelling task to achieve. In this paper, we introduce a new microaggregation method, called HM-PFSOM, based on fuzzy possibilistic clustering. Our proposed method operates through an hybrid manner. This means that the anonymization process is applied per block of similar data. Thus, we can help to decrease the information loss during the anonymization process. The HMPFSOM approach proposes to study the distribution of confidential attributes within each sub-dataset. Then, according to the latter distribution, the privacy parameter k is determined, in such a way to preserve the diversity of confidential attributes within the anonymized microdata. This allows to decrease the disclosure risk of confidential information.

Yuchao Zhou, Suparna De, Gideon Ewa et al.

The economic and social impact of poor air quality in towns and cities is increasingly being recognised, together with the need for effective ways of creating awareness of real-time air quality levels and their impact on human health. With local authority maintained monitoring stations being geographically sparse and the resultant datasets also featuring missing labels, computational data-driven mechanisms are needed to address the data sparsity challenge. In this paper, we propose a machine learning-based method to accurately predict the Air Quality Index (AQI), using environmental monitoring data together with meteorological measurements. To do so, we develop an air quality estimation framework that implements a neural network that is enhanced with a novel Non-linear Autoregressive neural network with exogenous input (NARX), especially designed for time series prediction. The framework is applied to a case study featuring different monitoring sites in London, with comparisons against other standard machine-learning based predictive algorithms showing the feasibility and robust performance of the proposed method for different kinds of areas within an urban region.

Yinhao Li, Awa Alqahtani, Ellis Solaiman et al.

Within the rapidly developing Internet of Things (IoT), numerous and diverse physical devices, Edge devices, Cloud infrastructure, and their quality of service requirements (QoS), need to be represented within a unified specification in order to enable rapid IoT application development, monitoring, and dynamic reconfiguration. But heterogeneities among different configuration knowledge representation models pose limitations for acquisition, discovery and curation of configuration knowledge for coordinated IoT applications. This paper proposes a unified data model to represent IoT resource configuration knowledge artifacts. It also proposes IoT-CANE (Context-Aware recommendatioN systEm) to facilitate incremental knowledge acquisition and declarative context driven knowledge recommendation.

Charith Perera, Saeed Aghaee, Ramsey Faragher et al.

Location sensing is a key enabling technology for Ubicomp to support contextual interaction. However, the laboratories where calibrated testing of location technologies is done are very different to the domestic situations where `context' is a problematic social construct. This study reports measurements of Bluetooth beacons, informed by laboratory studies, but done in diverse domestic settings. The design of these surveys has been motivated by the natural environment implied in the Bluetooth beacon standards - relating the technical environment of the beacon to the function of spaces within the home. This research method can be considered as a situated, `ethnographic' technical response to the study of physical infrastructure that arises through social processes. The results offer insights for the future design of `seamful' approaches to indoor location sensing, and to the ways that context might be constructed and interpreted in a seamful manner.

Charith Perera, Mahmoud Barhamgi, Arosha K. Bandara et al.

Internet of Things (IoT) applications typically collect and analyse personal data that can be used to derive sensitive information about individuals. However, thus far, privacy concerns have not been explicitly considered in software engineering processes when designing IoT applications. The advent of behaviour driven security mechanisms, failing to address privacy concerns in the design of IoT applications can have security implications. In this paper, we explore how a Privacy-by-Design (PbD) framework, formulated as a set of guidelines, can help software engineers integrate data privacy considerations into the design of IoT applications. We studied the utility of this PbD framework by studying how software engineers use it to design IoT applications. We also explore the challenges in using the set of guidelines to influence the IoT applications design process. In addition to highlighting the benefits of having a PbD framework to make privacy features explicit during the design of IoT applications, our studies also surfaced a number of challenges associated with the approach. A key finding of our research is that the PbD framework significantly increases both novice and expert software engineers' ability to design privacy into IoT applications.

Luiz H. Nunes, Julio C. Estrella, Alexandre C. B. Delbem et al.

Over the last few years, the number of smart objects connected to the Internet has grown exponentially in comparison to the number of services and applications. The integration between Cloud Computing and Internet of Things, named as Cloud of Things, plays a key role in managing the connected things, their data and services. One of the main challenges in Cloud of Things is the resource discovery of the smart objects and their reuse in different contexts. Most of the existent work uses some kind of multi-criteria decision analysis algorithm to perform the resource discovery, but do not evaluate the impact that the user constraints has in the final solution. In this paper, we analyse the behaviour of the SAW, TOPSIS and VIKOR multi-objective decision analyses algorithms and the impact of user constraints on them. We evaluated the quality of the proposed solutions using the Pareto-optimality concept.

Charith Perera, Chang Liu, Rajiv Ranjan et al.

Internet of Things (IoT) and cloud computing together give us the ability to sense, collect, process, and analyse data so we can use them to better understand behaviours, habits, preferences and life patterns of users and lead them to consume resources more efficiently. In such knowledge discovery activities, privacy becomes a significant challenge due to the extremely personal nature of the knowledge that can be derived from the data and the potential risks involved. Therefore, understanding the privacy expectations and preferences of stakeholders is an important task in the IoT domain. In this paper, we review how privacy knowledge has been modelled and used in the past in different domains. Our goal is not only to analyse, compare and consolidate past research work but also to appreciate their findings and discuss their applicability towards the IoT. Finally, we discuss major research challenges and opportunities.

Tommy Nilsson, Carl Hogsden, Charith Perera et al.

The application of mobile computing is currently altering patterns of our behavior to a greater degree than perhaps any other invention. In combination with the introduction of power efficient wireless communication technologies, such as Bluetooth Low Energy (BLE), designers are today increasingly empowered to shape the way we interact with our physical surroundings and thus build entirely new experiences. However, our evaluations of BLE and its abilities to facilitate mobile location-based experiences in public environments revealed a number of potential problems. Most notably, the position and orientation of the user in combination with various environmental factors, such as crowds of people traversing the space, were found to cause major fluctuations of the received BLE signal strength. These issues are rendering a seamless functioning of any location-based application practically impossible. Instead of achieving seamlessness by eliminating these technical issues, we thus choose to advocate the use of a seamful approach, i.e. to reveal and exploit these problems and turn them into a part of the actual experience. In order to demonstrate the viability of this approach, we designed, implemented and evaluated the Ghost Detector - an educational location-based museum game for children. By presenting a qualitative evaluation of this game and by motivating our design decisions, this paper provides insight into some of the challenges and possible solutions connected to the process of developing location-based BLE-enabled experiences for public cultural spaces.

Charith Perera, Rajiv Ranjan, Lizhe Wang

The idea of an open data market envisions the creation of a data trading model to facilitate exchange of data between different parties in the Internet of Things (IoT) domain. The data collected by IoT products and solutions are expected to be traded in these markets. Data owners will collect data using IoT products and solutions. Data consumers who are interested will negotiate with the data owners to get access to such data. Data captured by IoT products will allow data consumers to further understand the preferences and behaviours of data owners and to generate additional business value using different techniques ranging from waste reduction to personalized service offerings. In open data markets, data consumers will be able to give back part of the additional value generated to the data owners. However, privacy becomes a significant issue when data that can be used to derive extremely personal information is being traded. This paper discusses why privacy matters in the IoT domain in general and especially in open data markets and surveys existing privacy-preserving strategies and design techniques that can be used to facilitate end to end privacy for open data markets. We also highlight some of the major research challenges that need to be address in order to make the vision of open data markets a reality through ensuring the privacy of stakeholders.

Charith Perera, Saeed Aghaee, Alan Blackwell

This study explores the use of natural language to give instructions that might be interpreted by Internet of Things (IoT) devices in a domestic `smart home' environment. We start from the proposition that reminders can be considered as a type of end-user programming, in which the executed actions might be performed either by an automated agent or by the author of the reminder. We conducted an experiment in which people wrote sticky notes specifying future actions in their home. In different conditions, these notes were addressed to themselves, to others, or to a computer agent.We analyse the linguistic features and strategies that are used to achieve these tasks, including the use of graphical resources as an informal visual language. The findings provide a basis for design guidance related to end-user development for the Internet of Things.

Charith Perera, Arkady Zaslavsky, Michael Compton et al.

We propose a Context Aware Sensor Configuration Model (CASCoM) to address the challenge of automated context-aware configuration of filtering, fusion, and reasoning mechanisms in IoT middleware according to the problems at hand. We incorporate semantic technologies in solving the above challenges.

Charith Perera, Arkady Zaslavsky, Michael Compton et al.

We are currently observing emerging solutions to enable the Internet of Things (IoT). Efficient and feature rich IoT middeware platforms are key enablers for IoT. However, due to complexity, most of these middleware platforms are designed to be used by IT experts. In this paper, we propose a semantics-driven model that allows non-IT experts (e.g. plant scientist, city planner) to configure IoT middleware components easier and faster. Such tools allow them to retrieve the data they want without knowing the underlying technical details of the sensors and the data processing components. We propose a Context Aware Sensor Configuration Model (CASCoM) to address the challenge of automated context-aware configuration of filtering, fusion, and reasoning mechanisms in IoT middleware according to the problems at hand. We incorporate semantic technologies in solving the above challenges. We demonstrate the feasibility and the scalability of our approach through a prototype implementation based on an IoT middleware called Global Sensor Networks (GSN), though our model can be generalized into any other middleware platform. We evaluate CASCoM in agriculture domain and measure both performance in terms of usability and computational complexity.

Charith Perera, Arkady Zaslavsky, Peter Christen et al.

As we are moving towards the Internet of Things (IoT), the number of sensors deployed around the world is growing at a rapid pace. Market research has shown a significant growth of sensor deployments over the past decade and has predicted a significant increment of the growth rate in the future. These sensors continuously generate enormous amounts of data. However, in order to add value to raw sensor data we need to understand it. Collection, modelling, reasoning, and distribution of context in relation to sensor data plays critical role in this challenge. Context-aware computing has proven to be successful in understanding sensor data. In this paper, we survey context awareness from an IoT perspective. We present the necessary background by introducing the IoT paradigm and context-aware fundamentals at the beginning. Then we provide an in-depth analysis of context life cycle. We evaluate a subset of projects (50) which represent the majority of research and commercial solutions proposed in the field of context-aware computing conducted over the last decade (2001-2011) based on our own taxonomy. Finally, based on our evaluation, we highlight the lessons to be learnt from the past and some possible directions for future research. The survey addresses a broad range of techniques, methods, models, functionalities, systems, applications, and middleware solutions related to context awareness and IoT. Our goal is not only to analyse, compare and consolidate past research work but also to appreciate their findings and discuss their applicability towards the IoT.

Charith Perera, Arkady Zaslavsky, Peter Christen et al.

Internet of Things (IoT) will create a cyberphysical world where all the things around us are connected to the Inter net, sense and produce "big data" that has to be stored, processed and communicated with minimum human intervention. With the ever increasing emergence of new sensors, interfaces and mobile devices, the grand challenge is to keep up with this race in developing software drivers and wrappers for IoT things. In this paper, we examine the approaches that automate the process of developing middleware drivers/wrappers for the IoT things. We propose ASCM4GSN architecture to address this challenge efficiently and effectively. We demonstrate the proposed approach using Global Sensor Network (GSN) middleware which exemplifies a cluster of data streaming engines. The ASCM4GSN architecture significantly speeds up the wrapper development and sensor configuration process as demonstrated for Android mobile phone based sensors as well as for Sun SPOT sensors.

Charith Perera, Arkady Zaslavsky, Peter Christen et al.

Internet of Things (IoT) will connect billions of sensors deployed around the world together. This will create an ideal opportunity to build a sensing-as-a-service platform. Due to large number of sensor deployments, there would be number of sensors that can be used to sense and collect similar information. Further, due to advances in sensor hardware technology, new methods and measurements will be introduced continuously. In the IoT paradigm, selecting the most appropriate sensors which can provide relevant sensor data to address the problems at hand among billions of possibilities would be a challenge for both technical and non-technical users. In this paper, we propose the Context Awareness for Internet of Things (CA4IOT) architecture to help users by automating the task of selecting the sensors according to the problems/tasks at hand. We focus on automated configuration of filtering, fusion and reasoning mechanisms that can be applied to the collected sensor data streams using selected sensors. Our objective is to allow the users to submit their problems, so our proposed architecture understands them and produces more comprehensive and meaningful information than the raw sensor data streams generated by individual sensors.