Jiancan Wu

Jiancan Wu, Yi Yang, Yuchun Qian et al.

With the greater emphasis on privacy and security in our society, the problem of graph unlearning -- revoking the influence of specific data on the trained GNN model, is drawing increasing attention. However, ranging from machine unlearning to recently emerged graph unlearning methods, existing efforts either resort to retraining paradigm, or perform approximate erasure that fails to consider the inter-dependency between connected neighbors or imposes constraints on GNN structure, therefore hard to achieve satisfying performance-complexity trade-offs. In this work, we explore the influence function tailored for graph unlearning, so as to improve the unlearning efficacy and efficiency for graph unlearning. We first present a unified problem formulation of diverse graph unlearning tasks \wrt node, edge, and feature. Then, we recognize the crux to the inability of traditional influence function for graph unlearning, and devise Graph Influence Function (GIF), a model-agnostic unlearning method that can efficiently and accurately estimate parameter changes in response to a $ε$-mass perturbation in deleted data. The idea is to supplement the objective of the traditional influence function with an additional loss term of the influenced neighbors due to the structural dependency. Further deductions on the closed-form solution of parameter changes provide a better understanding of the unlearning mechanism. We conduct extensive experiments on four representative GNN models and three benchmark datasets to justify the superiority of GIF for diverse graph unlearning tasks in terms of unlearning efficacy, model utility, and unlearning efficiency. Our implementations are available at \url{https://github.com/wujcan/GIF-torch/}.

Yongduo Sui, Qitian Wu, Jiancan Wu et al.

The issue of distribution shifts is emerging as a critical concern in graph representation learning. From the perspective of invariant learning and stable learning, a recently well-established paradigm for out-of-distribution generalization, stable features of the graph are assumed to causally determine labels, while environmental features tend to be unstable and can lead to the two primary types of distribution shifts. The correlation shift is often caused by the spurious correlation between environmental features and labels that differs between the training and test data; the covariate shift often stems from the presence of new environmental features in test data. However, most strategies, such as invariant learning or graph augmentation, typically struggle with limited training environments or perturbed stable features, thus exposing limitations in handling the problem of covariate shift. To address this challenge, we propose a simple-yet-effective data augmentation strategy, Adversarial Invariant Augmentation (AIA), to handle the covariate shift on graphs. Specifically, given the training data, AIA aims to extrapolate and generate new environments, while concurrently preserving the original stable features during the augmentation process. Such a design equips the graph classification model with an enhanced capability to identify stable features in new environments, thereby effectively tackling the covariate shift in data. Extensive experiments with in-depth empirical analysis demonstrate the superiority of our approach. The implementation codes are publicly available at https://github.com/yongduosui/AIA.

Jiawei Chen, Junkang Wu, Jiancan Wu et al.

Recent years have witnessed the great successes of embedding-based methods in recommender systems. Despite their decent performance, we argue one potential limitation of these methods -- the embedding magnitude has not been explicitly modulated, which may aggravate popularity bias and training instability, hindering the model from making a good recommendation. It motivates us to leverage the embedding normalization in recommendation. By normalizing user/item embeddings to a specific value, we empirically observe impressive performance gains (9\% on average) on four real-world datasets. Although encouraging, we also reveal a serious limitation when applying normalization in recommendation -- the performance is highly sensitive to the choice of the temperature $τ$ which controls the scale of the normalized embeddings. To fully foster the merits of the normalization while circumvent its limitation, this work studied on how to adaptively set the proper $τ$. Towards this end, we first make a comprehensive analyses of $τ$ to fully understand its role on recommendation. We then accordingly develop an adaptive fine-grained strategy Adap-$τ$ for the temperature with satisfying four desirable properties including adaptivity, personalized, efficiency and model-agnostic. Extensive experiments have been conducted to validate the effectiveness of the proposal. The code is available at \url{https://github.com/junkangwu/Adap_tau}.

Qi Wan, Xiangnan He, Xiang Wang et al.

Most recommender systems optimize the model on observed interaction data, which is affected by the previous exposure mechanism and exhibits many biases like popularity bias. The loss functions, such as the mostly used pointwise Binary Cross-Entropy and pairwise Bayesian Personalized Ranking, are not designed to consider the biases in observed data. As a result, the model optimized on the loss would inherit the data biases, or even worse, amplify the biases. For example, a few popular items take up more and more exposure opportunities, severely hurting the recommendation quality on niche items -- known as the notorious Mathew effect. In this work, we develop a new learning paradigm named Cross Pairwise Ranking (CPR) that achieves unbiased recommendation without knowing the exposure mechanism. Distinct from inverse propensity scoring (IPS), we change the loss term of a sample -- we innovatively sample multiple observed interactions once and form the loss as the combination of their predictions. We prove in theory that this way offsets the influence of user/item propensity on the learning, removing the influence of data biases caused by the exposure mechanism. Advantageous to IPS, our proposed CPR ensures unbiased learning for each training instance without the need of setting the propensity scores. Experimental results demonstrate the superiority of CPR over state-of-the-art debiasing solutions in both model generalization and training efficiency. The codes are available at https://github.com/Qcactus/CPR.

Chengpeng Li, Zheng Yuan, Hongyi Yuan et al. · tsinghua

In math reasoning with large language models (LLMs), fine-tuning data augmentation by query evolution and diverse reasoning paths is empirically verified effective, profoundly narrowing the gap between open-sourced LLMs and cutting-edge proprietary LLMs. In this paper, we conduct an investigation for such data augmentation in math reasoning and are intended to answer: (1) What strategies of data augmentation are more effective; (2) What is the scaling relationship between the amount of augmented data and model performance; and (3) Can data augmentation incentivize generalization to out-of-domain mathematical reasoning tasks? To this end, we create two new dataset AugGSM8K and AugMATH, by complicating and diversifying the queries and sampling multiple reasoning paths from GSM8K and MATH. We obtained a series of LLMs called MuggleMath by fine-tuning LLaMA models on AugGSM8K and AugMATH. MuggleMath substantially achieves new state-of-the-art on GSM8K and MATH. A log-linear relationship and a segmented log-linear are presented between MuggleMath's performance and the amount of augmented data on GSM8K and MATH, respectively. We also find that it is weak in out-of-domain math reasoning generalization from AugGSM8K to MATH and from AugMATH to GSM8K, which suggests that augmenting queries that cover a broader range of subjects is more beneficial for generalization. We release our codes and augmented data in https://github.com/OFA-Sys/gsm8k-ScRel.

Junkang Wu, Yuexiang Xie, Zhengyi Yang et al.

Direct Preference Optimization (DPO) has emerged as a compelling approach for training Large Language Models (LLMs) to adhere to human preferences. However, the performance of DPO is sensitive to the fine-tuning of its trade-off parameter $β$, as well as to the quality of the preference data. We analyze the impact of $β$ and data quality on DPO, uncovering that optimal $β$ values vary with the informativeness of pairwise data. Addressing the limitations of static $β$ values, we introduce a novel framework that dynamically calibrates $β$ at the batch level, informed by data quality considerations. Additionally, our method incorporates $β$-guided data filtering to safeguard against the influence of outliers. Through empirical evaluation, we demonstrate that our dynamic $β$ adjustment technique significantly improves DPO's performance across a range of models and datasets, offering a more robust and adaptable training paradigm for aligning LLMs with human feedback. The code is available at \url{https://github.com/junkangwu/beta-DPO}.

Xiaoyu Kong, Jiancan Wu, An Zhang et al.

Sequential recommendation systems predict the next interaction item based on users' past interactions, aligning recommendations with individual preferences. Leveraging the strengths of Large Language Models (LLMs) in knowledge comprehension and reasoning, recent approaches are eager to apply LLMs to sequential recommendation. A common paradigm is converting user behavior sequences into instruction data, and fine-tuning the LLM with parameter-efficient fine-tuning (PEFT) methods like Low-Rank Adaption (LoRA). However, the uniform application of LoRA across diverse user behaviors is insufficient to capture individual variability, resulting in negative transfer between disparate sequences. To address these challenges, we propose Instance-wise LoRA (iLoRA). We innovatively treat the sequential recommendation task as a form of multi-task learning, integrating LoRA with the Mixture of Experts (MoE) framework. This approach encourages different experts to capture various aspects of user behavior. Additionally, we introduce a sequence representation guided gate function that generates customized expert participation weights for each user sequence, which allows dynamic parameter adjustment for instance-wise recommendations. In sequential recommendation, iLoRA achieves an average relative improvement of 11.4\% over basic LoRA in the hit ratio metric, with less than a 1\% relative increase in trainable parameters. Extensive experiments on three benchmark datasets demonstrate the effectiveness of iLoRA, highlighting its superior performance compared to existing methods in mitigating negative transfer and improving recommendation accuracy. Our data and code are available at https://github.com/AkaliKong/iLoRA.

Junkang Wu, Jiawei Chen, Jiancan Wu et al.

This study reveals the inherent tolerance of contrastive learning (CL) towards sampling bias, wherein negative samples may encompass similar semantics (\eg labels). However, existing theories fall short in providing explanations for this phenomenon. We bridge this research gap by analyzing CL through the lens of distributionally robust optimization (DRO), yielding several key insights: (1) CL essentially conducts DRO over the negative sampling distribution, thus enabling robust performance across a variety of potential distributions and demonstrating robustness to sampling bias; (2) The design of the temperature $τ$ is not merely heuristic but acts as a Lagrange Coefficient, regulating the size of the potential distribution set; (3) A theoretical connection is established between DRO and mutual information, thus presenting fresh evidence for ``InfoNCE as an estimate of MI'' and a new estimation approach for $φ$-divergence-based generalized mutual information. We also identify CL's potential shortcomings, including over-conservatism and sensitivity to outliers, and introduce a novel Adjusted InfoNCE loss (ADNCE) to mitigate these issues. It refines potential distribution, improving performance and accelerating convergence. Extensive experiments on various domains (image, sentence, and graphs) validate the effectiveness of the proposal. The code is available at \url{https://github.com/junkangwu/ADNCE}.

Junkang Wu, Yuexiang Xie, Zhengyi Yang et al.

This study addresses the challenge of noise in training datasets for Direct Preference Optimization (DPO), a method for aligning Large Language Models (LLMs) with human preferences. We categorize noise into pointwise noise, which includes low-quality data points, and pairwise noise, which encompasses erroneous data pair associations that affect preference rankings. Utilizing Distributionally Robust Optimization (DRO), we enhance DPO's resilience to these types of noise. Our theoretical insights reveal that DPO inherently embeds DRO principles, conferring robustness to pointwise noise, with the regularization coefficient $β$ playing a critical role in its noise resistance. Extending this framework, we introduce Distributionally Robustifying DPO (Dr. DPO), which integrates pairwise robustness by optimizing against worst-case pairwise scenarios. The novel hyperparameter $β'$ in Dr. DPO allows for fine-tuned control over data pair reliability, providing a strategic balance between exploration and exploitation in noisy training environments. Empirical evaluations demonstrate that Dr. DPO substantially improves the quality of generated text and response accuracy in preference datasets, showcasing enhanced performance in both noisy and noise-free settings. The code is available at https://github.com/junkangwu/Dr_DPO.

Wenyu Mao, Jiancan Wu, Haoyang Liu et al.

Graph out-of-distribution (OOD) generalization remains a major challenge in graph learning since graph neural networks (GNNs) often suffer from severe performance degradation under distribution shifts. Invariant learning, aiming to extract invariant features across varied distributions, has recently emerged as a promising approach for OOD generation. Despite the great success of invariant learning in OOD problems for Euclidean data (i.e., images), the exploration within graph data remains constrained by the complex nature of graphs. Existing studies, such as data augmentation or causal intervention, either suffer from disruptions to invariance during the graph manipulation process or face reliability issues due to a lack of supervised signals for causal parts. In this work, we propose a novel framework, called Invariant Graph Learning based on Information bottleneck theory (InfoIGL), to extract the invariant features of graphs and enhance models' generalization ability to unseen distributions. Specifically, InfoIGL introduces a redundancy filter to compress task-irrelevant information related to environmental factors. Cooperating with our designed multi-level contrastive learning, we maximize the mutual information among graphs of the same class in the downstream classification tasks, preserving invariant features for prediction to a great extent. An appealing feature of InfoIGL is its strong generalization ability without depending on supervised signal of invariance. Experiments on both synthetic and real-world datasets demonstrate that our method achieves state-of-the-art performance under OOD generalization for graph classification tasks. The source code is available at https://github.com/maowenyu-11/InfoIGL.

Chen-Lu Ding, Jiancan Wu, Wei Lin et al.

We introduce a novel self-supervised deep clustering approach tailored for unstructured data without requiring prior knowledge of the number of clusters, termed Adaptive Self-supervised Robust Clustering (ASRC). In particular, ASRC adaptively learns the graph structure and edge weights to capture both local and global structural information. The obtained graph enables us to learn clustering-friendly feature representations by an enhanced graph auto-encoder with contrastive learning technique. It further leverages the clustering results adaptively obtained by robust continuous clustering (RCC) to generate prototypes for negative sampling, which can further contribute to promoting consistency among positive pairs and enlarging the gap between positive and negative samples. ASRC obtains the final clustering results by applying RCC to the learned feature representations with their consistent graph structure and edge weights. Extensive experiments conducted on seven benchmark datasets demonstrate the efficacy of ASRC, demonstrating its superior performance over other popular clustering models. Notably, ASRC even outperforms methods that rely on prior knowledge of the number of clusters, highlighting its effectiveness in addressing the challenges of clustering unstructured data.

Chengpeng Li, Zhengyi Yang, Jizhi Zhang et al.

Reinforcement learning (RL) has been widely applied in recommendation systems due to its potential in optimizing the long-term engagement of users. From the perspective of RL, recommendation can be formulated as a Markov decision process (MDP), where recommendation system (agent) can interact with users (environment) and acquire feedback (reward signals).However, it is impractical to conduct online interactions with the concern on user experience and implementation complexity, and we can only train RL recommenders with offline datasets containing limited reward signals and state transitions. Therefore, the data sparsity issue of reward signals and state transitions is very severe, while it has long been overlooked by existing RL recommenders.Worse still, RL methods learn through the trial-and-error mode, but negative feedback cannot be obtained in implicit feedback recommendation tasks, which aggravates the overestimation problem of offline RL recommender. To address these challenges, we propose a novel RL recommender named model-enhanced contrastive reinforcement learning (MCRL). On the one hand, we learn a value function to estimate the long-term engagement of users, together with a conservative value learning mechanism to alleviate the overestimation problem.On the other hand, we construct some positive and negative state-action pairs to model the reward function and state transition function with contrastive learning to exploit the internal structure information of MDP. Experiments demonstrate that the proposed method significantly outperforms existing offline RL and self-supervised RL methods with different representative backbone networks on two real-world datasets.

Junkang Wu, Xue Wang, Zhengyi Yang et al.

Aligning large language models (LLMs) with human values and intentions is crucial for their utility, honesty, and safety. Reinforcement learning from human feedback (RLHF) is a popular approach to achieve this alignment, but it faces challenges in computational efficiency and training stability. Recent methods like Direct Preference Optimization (DPO) and Simple Preference Optimization (SimPO) have proposed offline alternatives to RLHF, simplifying the process by reparameterizing the reward function. However, DPO depends on a potentially suboptimal reference model, and SimPO's assumption of a fixed target reward margin may lead to suboptimal decisions in diverse data settings. In this work, we propose $α$-DPO, an adaptive preference optimization algorithm designed to address these limitations by introducing a dynamic reward margin. Specifically, $α$-DPO employs an adaptive preference distribution, balancing the policy model and the reference model to achieve personalized reward margins. We provide theoretical guarantees for $α$-DPO, demonstrating its effectiveness as a surrogate optimization objective and its ability to balance alignment and diversity through KL divergence control. Empirical evaluations on AlpacaEval 2 and Arena-Hard show that $α$-DPO consistently outperforms DPO and SimPO across various model settings, establishing it as a robust approach for fine-tuning LLMs. Our method achieves significant improvements in win rates, highlighting its potential as a powerful tool for LLM alignment. The code is available at https://github.com/junkangwu/alpha-DPO

Junkang Wu, Jiawei Chen, Jiancan Wu et al.

Loss functions steer the optimization direction of recommendation models and are critical to model performance, but have received relatively little attention in recent recommendation research. Among various losses, we find Softmax loss (SL) stands out for not only achieving remarkable accuracy but also better robustness and fairness. Nevertheless, the current literature lacks a comprehensive explanation for the efficacy of SL. Toward addressing this research gap, we conduct theoretical analyses on SL and uncover three insights: 1) Optimizing SL is equivalent to performing Distributionally Robust Optimization (DRO) on the negative data, thereby learning against perturbations on the negative distribution and yielding robustness to noisy negatives. 2) Comparing with other loss functions, SL implicitly penalizes the prediction variance, resulting in a smaller gap between predicted values and and thus producing fairer results. Building on these insights, we further propose a novel loss function Bilateral SoftMax Loss (BSL) that extends the advantage of SL to both positive and negative sides. BSL augments SL by applying the same Log-Expectation-Exp structure to positive examples as is used for negatives, making the model robust to the noisy positives as well. Remarkably, BSL is simple and easy-to-implement -- requiring just one additional line of code compared to SL. Experiments on four real-world datasets and three representative backbones demonstrate the effectiveness of our proposal. The code is available at https://github.com/junkangwu/BSL

Jie Sun, Junkang Wu, Jiancan Wu et al.

The alignment of Large Language Models (LLMs) is crucial for ensuring their safety and reliability in practical applications. Direct Preference Optimization (DPO) has emerged as an efficient method that directly optimizes models using preference pairs, significantly reducing resource demands. However, the effectiveness of DPO heavily depends on the data quality, which is frequently compromised by noise. In this work, we propose $γ$-PO, a dynamic target margin preference optimization algorithm that adjust reward margins at the pairwise level. By introducing instance-specific margin calibration, $γ$-PO strategically prioritizes high-confidence pairs (those demonstrating higher reward margins) while suppressing potential noise from ambiguous pairs. Moreover, $γ$-PO is a plug-and-play method, compatible with variants of DPO that rely on reward margin between preference pairs. Across benchmarks such as AlpacaEval2 and Arena-Hard, $γ$-PO achieves an average 4.4\% improvement over other baselines, setting new benchmarks for state-of-the-art performance. Additionally, $γ$-PO requires minimal code changes and has a negligible impact on training efficiency, making it a robust solution for enhancing LLMs alignment. Our codes are available at \href{https://github.com/sunjie279/gammaPO}{https://github.com/sunjie279/gammaPO}.

Yutian Liu, Zhengyi Yang, Jiancan Wu et al.

Recent advances have applied large language models (LLMs) to sequential recommendation, leveraging their pre-training knowledge and reasoning capabilities to provide more personalized user experiences. However, existing LLM-based methods fail to sufficiently leverage the rich temporal information inherent in users' historical interaction sequences, stemming from fundamental architectural constraints: LLMs process information through self-attention mechanisms that lack inherent sequence ordering and rely on position embeddings designed primarily for natural language rather than user interaction sequences. This limitation significantly impairs their ability to capture the evolution of user preferences over time and predict future interests accurately. To address this critical gap, we propose \underline{C}ounterfactual \underline{E}nhanced \underline{T}emporal Framework for LLM-Based \underline{Rec}ommendation (CETRec). CETRec is grounded in causal inference principles, which allow it to isolate and measure the specific impact of temporal information on recommendation outcomes. Combined with our counterfactual tuning task derived from causal analysis, CETRec effectively enhances LLMs' awareness of both absolute order (how recently items were interacted with) and relative order (the sequential relationships between items). Extensive experiments on real-world datasets demonstrate the effectiveness of our CETRec. Our code is available at https://anonymous.4open.science/r/CETRec-B9CE/.

Jiancan Wu, Xiangnan He, Xiang Wang et al.

The latest advance in recommendation shows that better user and item representations can be learned via performing graph convolutions on the user-item interaction graph. However, such finding is mostly restricted to the collaborative filtering (CF) scenario, where the interaction contexts are not available. In this work, we extend the advantages of graph convolutions to context-aware recommender system (CARS, which represents a generic type of models that can handle various side information). We propose \textit{Graph Convolution Machine} (GCM), an end-to-end framework that consists of three components: an encoder, graph convolution (GC) layers, and a decoder. The encoder projects users, items, and contexts into embedding vectors, which are passed to the GC layers that refine user and item embeddings with context-aware graph convolutions on user-item graph. The decoder digests the refined embeddings to output the prediction score by considering the interactions among user, item, and context embeddings. We conduct experiments on three real-world datasets from Yelp and Amazon, validating the effectiveness of GCM and the benefits of performing graph convolutions for CARS. Our implementations are available at \url{https://github.com/wujcan/GCM}.

Shuyao Wang, Yongduo Sui, Jiancan Wu et al.

In the realm of deep learning-based recommendation systems, the increasing computational demands, driven by the growing number of users and items, pose a significant challenge to practical deployment. This challenge is primarily twofold: reducing the model size while effectively learning user and item representations for efficient recommendations. Despite considerable advancements in model compression and architecture search, prevalent approaches face notable constraints. These include substantial additional computational costs from pre-training/re-training in model compression and an extensive search space in architecture design. Additionally, managing complexity and adhering to memory constraints is problematic, especially in scenarios with strict time or space limitations. Addressing these issues, this paper introduces a novel learning paradigm, Dynamic Sparse Learning (DSL), tailored for recommendation models. DSL innovatively trains a lightweight sparse model from scratch, periodically evaluating and dynamically adjusting each weight's significance and the model's sparsity distribution during the training. This approach ensures a consistent and minimal parameter budget throughout the full learning lifecycle, paving the way for "end-to-end" efficiency from training to inference. Our extensive experimental results underline DSL's effectiveness, significantly reducing training and inference costs while delivering comparable recommendation performance.

Jinda Lu, Jinghan Li, Yuan Gao et al.

Preference alignment through Direct Preference Optimization (DPO) has demonstrated significant effectiveness in aligning multimodal large language models (MLLMs) with human preferences. However, existing methods focus primarily on language preferences while neglecting the critical visual context. In this paper, we propose an Adaptive Vision-enhanced Preference optimization (AdaViP) that addresses these limitations through two key innovations: (1) vision-based preference pair construction, which integrates multiple visual foundation models to strategically remove key visual elements from the image, enhancing MLLMs' sensitivity to visual details; and (2) adaptive preference optimization that dynamically balances vision- and language-based preferences for more accurate alignment. Extensive evaluations across different benchmarks demonstrate our effectiveness. Notably, our AdaViP-7B achieves 93.7% and 96.4% reductions in response-level and mentioned-level hallucination respectively on the Object HalBench, significantly outperforming current state-of-the-art methods.

Chenlu Ding, Jiancan Wu, Yancheng Yuan et al.

In online advertising under the cost-per-conversion (CPA) model, accurate conversion rate (CVR) prediction is crucial. A major challenge is delayed feedback, where conversions may occur long after user interactions, leading to incomplete recent data and biased model training. Existing solutions partially mitigate this issue but often rely on auxiliary models, making them computationally inefficient and less adaptive to user interest shifts. We propose IF-DFM, an \underline{I}nfluence \underline{F}unction-empowered for \underline{D}elayed \underline{F}eedback \underline{M}odeling which estimates the impact of newly arrived and delayed conversions on model parameters, enabling efficient updates without full retraining. By reformulating the inverse Hessian-vector product as an optimization problem, IF-DFM achieves a favorable trade-off between scalability and effectiveness. Experiments on benchmark datasets show that IF-DFM outperforms prior methods in both accuracy and adaptability.

Jiancan Wu, Xiang Wang, Xingyu Gao et al.

The learning objective plays a fundamental role to build a recommender system. Most methods routinely adopt either pointwise or pairwise loss to train the model parameters, while rarely pay attention to softmax loss due to its computational complexity when scaling up to large datasets or intractability for streaming data. The sampled softmax (SSM) loss emerges as an efficient substitute for softmax loss. Its special case, InfoNCE loss, has been widely used in self-supervised learning and exhibited remarkable performance for contrastive learning. Nonetheless, limited recommendation work uses the SSM loss as the learning objective. Worse still, none of them explores its properties thoroughly and answers ``Does SSM loss suit for item recommendation?'' and ``What are the conceptual advantages of SSM loss, as compared with the prevalent losses?'', to the best of our knowledge. In this work, we aim to offer a better understanding of SSM for item recommendation. Specifically, we first theoretically reveal three model-agnostic advantages: (1) mitigating popularity bias; (2) mining hard negative samples; and (3) maximizing the ranking metric. However, based on our empirical studies, we recognize that the default choice of cosine similarity function in SSM limits its ability in learning the magnitudes of representation vectors. As such, the combinations of SSM with the models that also fall short in adjusting magnitudes may result in poor representations. One step further, we provide mathematical proof that message passing schemes in graph convolution networks can adjust representation magnitude according to node degree, which naturally compensates for the shortcoming of SSM. Extensive experiments on four benchmark datasets justify our analyses, demonstrating the superiority of SSM for item recommendation. Our implementations are available in both TensorFlow and PyTorch.

Yongduo Sui, Xiang Wang, Jiancan Wu et al.

In graph classification, attention and pooling-based graph neural networks (GNNs) prevail to extract the critical features from the input graph and support the prediction. They mostly follow the paradigm of learning to attend, which maximizes the mutual information between the attended graph and the ground-truth label. However, this paradigm makes GNN classifiers recklessly absorb all the statistical correlations between input features and labels in the training data, without distinguishing the causal and noncausal effects of features. Instead of underscoring the causal features, the attended graphs are prone to visit the noncausal features as the shortcut to predictions. Such shortcut features might easily change outside the training distribution, thereby making the GNN classifiers suffer from poor generalization. In this work, we take a causal look at the GNN modeling for graph classification. With our causal assumption, the shortcut feature serves as a confounder between the causal feature and prediction. It tricks the classifier to learn spurious correlations that facilitate the prediction in in-distribution (ID) test evaluation, while causing the performance drop in out-of-distribution (OOD) test data. To endow the classifier with better interpretation and generalization, we propose the Causal Attention Learning (CAL) strategy, which discovers the causal patterns and mitigates the confounding effect of shortcuts. Specifically, we employ attention modules to estimate the causal and shortcut features of the input graph. We then parameterize the backdoor adjustment of causal theory -- combine each causal feature with various shortcut features. It encourages the stable relationships between the causal estimation and prediction, regardless of the changes in shortcut parts and distributions. Extensive experiments on synthetic and real-world datasets demonstrate the effectiveness of CAL.