Olga Fink

Qin Wang, Olga Fink, Luc Van Gool et al.

Test-time domain adaptation aims to adapt a source pre-trained model to a target domain without using any source data. Existing works mainly consider the case where the target domain is static. However, real-world machine perception systems are running in non-stationary and continually changing environments where the target domain distribution can change over time. Existing methods, which are mostly based on self-training and entropy regularization, can suffer from these non-stationary environments. Due to the distribution shift over time in the target domain, pseudo-labels become unreliable. The noisy pseudo-labels can further lead to error accumulation and catastrophic forgetting. To tackle these issues, we propose a continual test-time adaptation approach~(CoTTA) which comprises two parts. Firstly, we propose to reduce the error accumulation by using weight-averaged and augmentation-averaged predictions which are often more accurate. On the other hand, to avoid catastrophic forgetting, we propose to stochastically restore a small part of the neurons to the source pre-trained weights during each iteration to help preserve source knowledge in the long-term. The proposed method enables the long-term adaptation for all parameters in the network. CoTTA is easy to implement and can be readily incorporated in off-the-shelf pre-trained models. We demonstrate the effectiveness of our approach on four classification tasks and a segmentation task for continual test-time adaptation, on which we outperform existing methods. Our code is available at \url{https://qin.ee/cotta}.

Adam Thelen, Xiaoge Zhang, Olga Fink et al.

As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively modeling the physical world as a group of interconnected digital models. In a two-part series of papers, we examine the fundamental role of different modeling techniques, twinning enabling technologies, and uncertainty quantification and optimization methods commonly used in digital twins. This second paper presents a literature review of key enabling technologies of digital twins, with an emphasis on uncertainty quantification, optimization methods, open source datasets and tools, major findings, challenges, and future directions. Discussions focus on current methods of uncertainty quantification and optimization and how they are applied in different dimensions of a digital twin. Additionally, this paper presents a case study where a battery digital twin is constructed and tested to illustrate some of the modeling and twinning methods reviewed in this two-part review. Code and preprocessed data for generating all the results and figures presented in the case study are available on GitHub.

Adam Thelen, Xiaoge Zhang, Olga Fink et al.

As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively modeling the physical world as a group of interconnected digital models. In a two-part series of papers, we examine the fundamental role of different modeling techniques, twinning enabling technologies, and uncertainty quantification and optimization methods commonly used in digital twins. This first paper presents a thorough literature review of digital twin trends across many disciplines currently pursuing this area of research. Then, digital twin modeling and twinning enabling technologies are further analyzed by classifying them into two main categories: physical-to-virtual, and virtual-to-physical, based on the direction in which data flows. Finally, this paper provides perspectives on the trajectory of digital twin technology over the next decade, and introduces a few emerging areas of research which will likely be of great use in future digital twin research. In part two of this review, the role of uncertainty quantification and optimization are discussed, a battery digital twin is demonstrated, and more perspectives on the future of digital twin are shared.

Mengjie Zhao, Cees Taal, Stephan Baggerohr et al.

Real-time condition monitoring is crucial for the reliable and efficient operation of complex systems. However, relying solely on physical sensors can be limited due to their cost, placement constraints, or inability to directly measure certain critical parameters. Virtual sensing addresses these limitations by leveraging readily available sensor data and system knowledge to estimate inaccessible parameters or infer system states. The increasing complexity of industrial systems necessitates deployments of sensors with diverse modalities to provide a comprehensive understanding of system states. These sensors capture data at varying frequencies to monitor both rapid and slowly varying system dynamics, as well as local and global state evolutions of the systems. This leads to heterogeneous temporal dynamics, which, particularly under varying operational end environmental conditions, pose a significant challenge for accurate virtual sensing. To address this, we propose a Heterogeneous Temporal Graph Neural Network (HTGNN) framework. HTGNN explicitly models signals from diverse sensors and integrates operating conditions into the model architecture. We evaluate HTGNN using two newly released datasets: a bearing dataset with diverse load conditions for bearing load prediction and a year-long simulated dataset for predicting bridge live loads. Our results demonstrate that HTGNN significantly outperforms established baseline methods in both tasks, particularly under highly varying operating conditions. These results highlight HTGNN's potential as a robust and accurate virtual sensing approach for complex systems, paving the way for improved monitoring, predictive maintenance, and enhanced system performance. Our code and data are available under https://github.com/EPFL-IMOS/htgnn.

Hao Dong, Ismail Nejjar, Han Sun et al.

In real-world scenarios, achieving domain generalization (DG) presents significant challenges as models are required to generalize to unknown target distributions. Generalizing to unseen multi-modal distributions poses even greater difficulties due to the distinct properties exhibited by different modalities. To overcome the challenges of achieving domain generalization in multi-modal scenarios, we propose SimMMDG, a simple yet effective multi-modal DG framework. We argue that mapping features from different modalities into the same embedding space impedes model generalization. To address this, we propose splitting the features within each modality into modality-specific and modality-shared components. We employ supervised contrastive learning on the modality-shared features to ensure they possess joint properties and impose distance constraints on modality-specific features to promote diversity. In addition, we introduce a cross-modal translation module to regularize the learned features, which can also be used for missing-modality generalization. We demonstrate that our framework is theoretically well-supported and achieves strong performance in multi-modal DG on the EPIC-Kitchens dataset and the novel Human-Animal-Cartoon (HAC) dataset introduced in this paper. Our source code and HAC dataset are available at https://github.com/donghao51/SimMMDG.

Ismail Nejjar, Qin Wang, Olga Fink

Unsupervised Domain Adaptation Regression (DAR) aims to bridge the domain gap between a labeled source dataset and an unlabelled target dataset for regression problems. Recent works mostly focus on learning a deep feature encoder by minimizing the discrepancy between source and target features. In this work, we present a different perspective for the DAR problem by analyzing the closed-form ordinary least square~(OLS) solution to the linear regressor in the deep domain adaptation context. Rather than aligning the original feature embedding space, we propose to align the inverse Gram matrix of the features, which is motivated by its presence in the OLS solution and the Gram matrix's ability to capture the feature correlations. Specifically, we propose a simple yet effective DAR method which leverages the pseudo-inverse low-rank property to align the scale and angle in a selected subspace generated by the pseudo-inverse Gram matrix of the two domains. We evaluate our method on three domain adaptation regression benchmarks. Experimental results demonstrate that our method achieves state-of-the-art performance. Our code is available at https://github.com/ismailnejjar/DARE-GRAM.

Florent Forest, Hugo Porta, Devis Tuia et al.

Monitoring surface cracks in infrastructure is crucial for structural health monitoring. Automatic visual inspection offers an effective solution, especially in hard-to-reach areas. Machine learning approaches have proven their effectiveness but typically require large annotated datasets for supervised training. Once a crack is detected, monitoring its severity often demands precise segmentation of the damage. However, pixel-level annotation of images for segmentation is labor-intensive. To mitigate this cost, one can leverage explainable artificial intelligence (XAI) to derive segmentations from the explanations of a classifier, requiring only weak image-level supervision. This paper proposes applying this methodology to segment and monitor surface cracks. We evaluate the performance of various XAI methods and examine how this approach facilitates severity quantification and growth monitoring. Results reveal that while the resulting segmentation masks may exhibit lower quality than those produced by supervised methods, they remain meaningful and enable severity monitoring, thus reducing substantial labeling costs.

Hao Dong, Gaëtan Frusque, Yue Zhao et al.

Anomaly detection (AD) is essential in identifying rare and often critical events in complex systems, finding applications in fields such as network intrusion detection, financial fraud detection, and fault detection in infrastructure and industrial systems. While AD is typically treated as an unsupervised learning task due to the high cost of label annotation, it is more practical to assume access to a small set of labeled anomaly samples from domain experts, as is the case for semi-supervised anomaly detection. Semi-supervised and supervised approaches can leverage such labeled data, resulting in improved performance. In this paper, rather than proposing a new semi-supervised or supervised approach for AD, we introduce a novel algorithm for generating additional pseudo-anomalies on the basis of the limited labeled anomalies and a large volume of unlabeled data. This serves as an augmentation to facilitate the detection of new anomalies. Our proposed algorithm, named Nearest Neighbor Gaussian Mixup (NNG-Mix), efficiently integrates information from both labeled and unlabeled data to generate pseudo-anomalies. We compare the performance of this novel algorithm with commonly applied augmentation techniques, such as Mixup and Cutout. We evaluate NNG-Mix by training various existing semi-supervised and supervised anomaly detection algorithms on the original training data along with the generated pseudo-anomalies. Through extensive experiments on 57 benchmark datasets in ADBench, reflecting different data types, we demonstrate that NNG-Mix outperforms other data augmentation methods. It yields significant performance improvements compared to the baselines trained exclusively on the original training data. Notably, NNG-Mix yields up to 16.4%, 8.8%, and 8.0% improvements on Classical, CV, and NLP datasets in ADBench. Our source code is available at https://github.com/donghao51/NNG-Mix.

Vsevolod Skorokhodov, Chenghao Xu, Shuo Sun et al.

Foundational feed-forward visual geometry models enable accurate and efficient camera pose estimation and scene reconstruction by learning strong scene priors from massive RGB datasets. However, their effectiveness drops when applied to mixed sensing modalities, such as RGB-thermal (RGB-T) images. We observe that while a visual geometry grounded transformer pretrained on RGB data generalizes well to thermal-only reconstruction, it struggles to align RGB and thermal modalities when processed jointly. To address this, we propose SEAR, a simple yet efficient fine-tuning strategy that adapts a pretrained geometry transformer to multimodal RGB-T inputs. Despite being trained on a relatively small RGB-T dataset, our approach significantly outperforms state-of-the-art methods for 3D reconstruction and camera pose estimation, achieving significant improvements over all metrics (e.g., over 29\% in AUC@30) and delivering higher detail and consistency between modalities with negligible overhead in inference time compared to the original pretrained model. Notably, SEAR enables reliable multimodal pose estimation and reconstruction even under challenging conditions, such as low lighting and dense smoke. We validate our architecture through extensive ablation studies, demonstrating how the model aligns both modalities. Additionally, we introduce a new dataset featuring RGB and thermal sequences captured at different times, viewpoints, and illumination conditions, providing a robust benchmark for future work in multimodal 3D scene reconstruction. Code and models are publicly available at https://www.github.com/Schindler-EPFL-Lab/SEAR.

Hao Dong, Eleni Chatzi, Olga Fink

The task of open-set domain generalization (OSDG) involves recognizing novel classes within unseen domains, which becomes more challenging with multiple modalities as input. Existing works have only addressed unimodal OSDG within the meta-learning framework, without considering multimodal scenarios. In this work, we introduce a novel approach to address Multimodal Open-Set Domain Generalization (MM-OSDG) for the first time, utilizing self-supervision. To this end, we introduce two innovative multimodal self-supervised pretext tasks: Masked Cross-modal Translation and Multimodal Jigsaw Puzzles. These tasks facilitate the learning of multimodal representative features, thereby enhancing generalization and open-class detection capabilities. Additionally, we propose a novel entropy weighting mechanism to balance the loss across different modalities. Furthermore, we extend our approach to tackle also the Multimodal Open-Set Domain Adaptation (MM-OSDA) problem, especially in scenarios where unlabeled data from the target domain is available. Extensive experiments conducted under MM-OSDG, MM-OSDA, and Multimodal Closed-Set DG settings on the EPIC-Kitchens and HAC datasets demonstrate the efficacy and versatility of the proposed approach. Our source code is available at https://github.com/donghao51/MOOSA.

Yan Hao, Florent Forest, Olga Fink

This paper focuses on source-free domain adaptation for object detection in computer vision. This task is challenging and of great practical interest, due to the cost of obtaining annotated data sets for every new domain. Recent research has proposed various solutions for Source-Free Object Detection (SFOD), most being variations of teacher-student architectures with diverse feature alignment, regularization and pseudo-label selection strategies. Our work investigates simpler approaches and their performance compared to more complex SFOD methods in several adaptation scenarios. We highlight the importance of batch normalization layers in the detector backbone, and show that adapting only the batch statistics is a strong baseline for SFOD. We propose a simple extension of a Mean Teacher with strong-weak augmentation in the source-free setting, Source-Free Unbiased Teacher (SF-UT), and show that it actually outperforms most of the previous SFOD methods. Additionally, we showcase that an even simpler strategy consisting in training on a fixed set of pseudo-labels can achieve similar performance to the more complex teacher-student mutual learning, while being computationally efficient and mitigating the major issue of teacher-student collapse. We conduct experiments on several adaptation tasks using benchmark driving datasets including (Foggy)Cityscapes, Sim10k and KITTI, and achieve a notable improvement of 4.7\% AP50 on Cityscapes$\rightarrow$Foggy-Cityscapes compared with the latest state-of-the-art in SFOD. Source code is available at https://github.com/EPFL-IMOS/simple-SFOD.

Hao Lu, Adam Thelen, Olga Fink et al.

Operators from various industries have been pushing the adoption of wireless sensing nodes for industrial monitoring, and such efforts have produced sizeable condition monitoring datasets that can be used to build diagnosis algorithms capable of warning maintenance engineers of impending failure or identifying current system health conditions. However, single operators may not have sufficiently large fleets of systems or component units to collect sufficient data to develop data-driven algorithms. Collecting a satisfactory quantity of fault patterns for safety-critical systems is particularly difficult due to the rarity of faults. Federated learning (FL) has emerged as a promising solution to leverage datasets from multiple operators to train a decentralized asset fault diagnosis model while maintaining data confidentiality. However, there are still considerable obstacles to overcome when it comes to optimizing the federation strategy without leaking sensitive data and addressing the issue of client dataset heterogeneity. This is particularly prevalent in fault diagnosis applications due to the high diversity of operating conditions and system configurations. To address these two challenges, we propose a novel clustering-based FL algorithm where clients are clustered for federating based on dataset similarity. To quantify dataset similarity between clients without explicitly sharing data, each client sets aside a local test dataset and evaluates the other clients' model prediction accuracy and uncertainty on this test dataset. Clients are then clustered for FL based on relative prediction accuracy and uncertainty.

Yuan Tian, Klaus-Rudolf Kladny, Qin Wang et al.

In multi-agent reinforcement learning, multiple agents learn simultaneously while interacting with a common environment and each other. Since the agents adapt their policies during learning, not only the behavior of a single agent becomes non-stationary, but also the environment as perceived by the agent. This renders it particularly challenging to perform policy improvement. In this paper, we propose to exploit the fact that the agents seek to improve their expected cumulative reward and introduce a novel \textit{Time Dynamical Opponent Model} (TDOM) to encode the knowledge that the opponent policies tend to improve over time. We motivate TDOM theoretically by deriving a lower bound of the log objective of an individual agent and further propose \textit{Multi-Agent Actor-Critic with Time Dynamical Opponent Model} (TDOM-AC). We evaluate the proposed TDOM-AC on a differential game and the Multi-agent Particle Environment. We show empirically that TDOM achieves superior opponent behavior prediction during test time. The proposed TDOM-AC methodology outperforms state-of-the-art Actor-Critic methods on the performed experiments in cooperative and \textbf{especially} in mixed cooperative-competitive environments. TDOM-AC results in a more stable training and a faster convergence.

Chenghao Xu, Malcolm Mielle, Olga Fink

Inferring latent physical properties from sensory observations is a fundamental challenge in machine perception. Among available sensing modalities, thermal imaging is particularly promising because temperature evolution is directly governed by heat-transfer physics and therefore encodes information about underlying thermophysical properties of a scene. Recovering spatially resolved thermophysical properties from thermal observations could transform applications ranging from digital twins and infrastructure monitoring to robotics and scientific imaging. However, existing thermal scene reconstruction methods can recover temperature fields in complex 3D environments without identifying the thermophyiscal properties that govern thermal evolution, whereas inverse methods provide physically interpretable parameter estimation but typically rely on simplified geometries and controlled experimental conditions. Here we introduce ThermoField, a framework that unifies thermal scene reconstruction and thermophysical parameter estimation through differentiable heat-transfer simulation. The proposed framework represents these quantities as spatially varying neural fields and constrains them through scene geometry, governing heat-transfer physics, and temporal thermal observations. We demonstrate that ThermoField jointly reconstructs geometry, estimates spatially varying thermal diffusivity, and predicts thermal evolution under previously unseen environmental conditions. By integrating neural scene representations with differentiable heat-transfer solver, the framework enables physically interpretable parameter inference in complex 3D scenes. Our results establish a bridge between thermal scene reconstruction and inverse heat-transfer analysis, providing a unified approach for geometry reconstruction, thermophysical property estimation, and predictive thermal simulation from thermal observations.

Ismail Nejjar, Fabian Geissmann, Mengjie Zhao et al.

Effective Prognostics and Health Management (PHM) relies on accurate prediction of the Remaining Useful Life (RUL). Data-driven RUL prediction techniques rely heavily on the representativeness of the available time-to-failure trajectories. Therefore, these methods may not perform well when applied to data from new units of a fleet that follow different operating conditions than those they were trained on. This is also known as domain shifts. Domain adaptation (DA) methods aim to address the domain shift problem by extracting domain invariant features. However, DA methods do not distinguish between the different phases of operation, such as steady states or transient phases. This can result in misalignment due to under- or over-representation of different operation phases. This paper proposes two novel DA approaches for RUL prediction based on an adversarial domain adaptation framework that considers the different phases of the operation profiles separately. The proposed methodologies align the marginal distributions of each phase of the operation profile in the source domain with its counterpart in the target domain. The effectiveness of the proposed methods is evaluated using the New Commercial Modular Aero-Propulsion System (N-CMAPSS) dataset, where sub-fleets of turbofan engines operating in one of the three different flight classes (short, medium, and long) are treated as separate domains. The experimental results show that the proposed methods improve the accuracy of RUL predictions compared to current state-of-the-art DA methods.

Jay Lee, Hanqi Su, Marco Macchi et al.

The evolution of artificial intelligence (AI) and machine learning (ML) is reshaping smart manufacturing by providing new capabilities for efficiency, adaptability, and autonomy across industrial value chains. However, the deployment of AI and ML in industrial settings still faces critical challenges, including the complexity of industrial big data, effective data management, integration with heterogeneous sensing and control systems, and the demand for trustworthy, explainable, and reliable operation in high-stakes industrial environments. In this roadmap, we present a comprehensive perspective on the foundations, applications, and emerging directions of AI and ML in smart manufacturing. It is structured in three parts. The first highlights the foundations and trends that frame the evolution of AI in smart manufacturing. The second focuses on key topics where AI is already enabling advances, including industrial big data analytics, advanced sensing and perception, autonomous systems, additive and laser-based manufacturing, digital twins, robotics, supply chain and logistics optimization, and sustainable manufacturing. The third section explores non-traditional ML approaches that are opening new frontiers, such as physics-informed AI, generative AI, semantic AI, advanced digital twins, explainable AI, RAMS, data-centric metrology, LLMs, and foundation models for highly connected and complex manufacturing systems. By identifying both opportunities and remaining barriers across these areas, this roadmap outlines the advances needed in methods, integration strategies, and industrial adoption. We hope this roadmap will serve as a guide for researchers, engineers, and practitioners to accelerate innovation, align academic and industrial priorities, and ensure that AI-driven smart manufacturing delivers reliable, sustainable, and scalable impact for the future of manufacturing ecosystems.

Katharina Rombach, Gabriel Michau, Olga Fink

New operating conditions can result in a significant performance drop of fault diagnostics models due to the domain shift between the training and the testing data distributions. While several domain adaptation approaches have been proposed to overcome such domain shifts, their application is limited if the fault classes represented in the two domains are not the same. To enable a better transferability of the trained models between two different domains, particularly in setups where only the healthy data class is shared between the two domains, we propose a new framework for Partial and Open-Partial domain adaptation based on generating distinct fault signatures with a Wasserstein GAN. The main contribution of the proposed framework is the controlled synthetic fault data generation with two main distinct characteristics. Firstly, the proposed methodology enables to generate unobserved fault types in the target domain by having only access to the healthy samples in the target domain and faulty samples in the source domain. Secondly, the fault generation can be controlled to precisely generate distinct fault types and fault severity levels. The proposed method is especially suited in extreme domain adaption settings that are particularly relevant in the context of complex and safety-critical systems, where only one class is shared between the two domains. We evaluate the proposed framework on Partial as well as Open-Partial domain adaptation tasks on two bearing fault diagnostics case studies. Our experiments conducted in different label space settings showcase the versatility of the proposed framework. The proposed methodology provided superior results compared to other methods given large domain gaps.

Wenyang Hu, Gaetan Frusque, Tianyang Wang et al.

Deriving health indicators of rotating machines is crucial for their maintenance. However, this process is challenging for the prevalent adopted intelligent methods since they may take the whole data distributions, not only introducing noise interference but also lacking the explainability. To address these issues, we propose a diffusion-based weakly-supervised approach for deriving health indicators of rotating machines, enabling early fault detection and continuous monitoring of condition evolution. This approach relies on a classifier-free diffusion model trained using healthy samples and a few anomalies. This model generates healthy samples. and by comparing the differences between the original samples and the generated ones in the envelope spectrum, we construct an anomaly map that clearly identifies faults. Health indicators are then derived, which can explain the fault types and mitigate noise interference. Comparative studies on two cases demonstrate that the proposed method offers superior health monitoring effectiveness and robustness compared to baseline models.

Gaetan Frusque, Olga Fink

Signal denoising is a key preprocessing step for many applications, as the performance of a learning task is closely related to the quality of the input data. In this paper, we apply a signal processing based deep neural network architecture, a learnable extension of the wavelet packet transform. As main advantages, this model has few parameters, an intuitive initialization and strong learning capabilities. Moreover, we show that it is possible to easily modify the parameters of the model after the training step to tailor to different noise intensities. Two case studies are conducted to compare this model with the state of the art and commonly used denoising procedures. The first experiment uses standard signals to study denoising properties of the algorithms. The second experiment is a real application with the objective to remove audio background noises. We show that the learnable wavelet packet transform has the learning capabilities of deep learning methods while maintaining the robustness of standard signal processing approaches. More specifically, we demonstrate that our approach maintains excellent denoising performances on signal classes separate from those used during the training step. Moreover, the learnable wavelet packet transform was found to be robust when different noise intensities, noise varieties and artifacts are considered.

Raffael Theiler, Ludovico Comito, David Leko et al.

Industrial Prognostics and Health Management (PHM) provides a representative case study for a broader challenge in applied machine learning: translating published papers into executable, benchmark-ready implementations. Reproducing under-specified methods in PHM is particularly difficult due to restricted access to industrial datasets, incomplete reporting of preprocessing and evaluation protocols, and implicit design choices (e.g., windowing, target construction, data splits) that critically affect performance. Existing paper-to-code systems generate implementations for individual papers, but these artifacts are often not directly comparable due to inconsistencies in assumptions and evaluation settings. We introduce \emph{agentic, framework-based PHM paper reproduction}, where an agent translates a paper into a shared PHM benchmark framework via a \emph{slot-binding interface}. This interface maps equations and protocol descriptions into structured components (task definitions, dataset adapters, windowing, targets, models, and evaluators), while explicitly recording unresolved assumptions. The resulting implementations are validated against standardized task contracts and evaluation hooks, enabling consistent and comparable benchmarking. We evaluate this approach on 16 PHM papers, comparing framework-enhanced, skill-based and prompt-based agentic reproduction against a recent framework-free paper-reproduction agent. We assess reproduction success, model-based code evaluation, framework binding of paper assumptions, and cross-paper benchmark comparability under standardized protocols. Our results show that coupling agentic generation with a shared framework transforms paper reproduction from isolated code synthesis into executable, assumption-aware, and systematically comparable benchmark implementations.

Jean Cordonnier, Chenghao Xu, Olga Fink et al.

Multi-modal novel view synthesis (NVS) combining RGB and thermal imagery enables precise 3D scene reconstruction with visual and thermal information. However, existing methods typically rely on precisely calibrated RGB-thermal image pairs or stereo setups, limiting scalability and practical deployment. To address this, we introduce a framework for unpaired RGB-thermal NVS that leverages VGGT, a 3D feed-forward transformer architecture, to independently estimate camera poses for each modality. The pose sets are then aligned using the Procrustes algorithm with a cross-modal feature matcher, enabling joint registration without paired calibration. Building on this alignment, we further propose a multi-modal 3D Gaussian Splatting approach that learns directly from unpaired RGB and thermal images. Experiments on diverse scenes demonstrate that our method achieves competitive performance in thermal view synthesis while maintaining RGB fidelity. Moreover, we show that existing reconstruction approaches can produce modality-specific reconstructions that lack cross-modal consistency. We thus introduce a benchmarking framework to rigorously evaluate both per-modality image synthesis and the multi-modal coherence of reconstructed scenes.

Gaëtan Frusque, Daniel Mitchell, Jamie Blanche et al.

The occurrence of manufacturing defects in wind turbine blade (WTB) production can result in significant increases in operation and maintenance costs and lead to severe and disastrous consequences. Therefore, inspection during the manufacturing process is crucial to ensure consistent fabrication of composite materials. Non-contact sensing techniques, such as Frequency Modulated Continuous Wave (FMCW) radar, are becoming increasingly popular as they offer a full view of these complex structures during curing. In this paper, we enhance the quality assurance of manufacturing utilizing FMCW radar as a non-destructive sensing modality. Additionally, a novel anomaly detection pipeline is developed that offers the following advantages: (1) We use the analytic representation of the Intermediate Frequency signal of the FMCW radar as a feature to disentangle material-specific and round-trip delay information from the received wave. (2) We propose a novel anomaly detection methodology called focus Support Vector Data Description (focus-SVDD). This methodology involves defining the limit boundaries of the dataset after removing healthy data features, thereby focusing on the attributes of anomalies. (3) The proposed method employs a complex-valued autoencoder to remove healthy features and we introduces a new activation function called Exponential Amplitude Decay (EAD). EAD takes advantage of the Rayleigh distribution, which characterizes an instantaneous amplitude signal. The effectiveness of the proposed method is demonstrated through its application to collected data, where it shows superior performance compared to other state-of-the-art unsupervised anomaly detection methods. This method is expected to make a significant contribution not only to structural health monitoring but also to the field of deep complex-valued data processing and SVDD application.

Jiawei Xiong, Olga Fink, Jian Zhou et al.

Limited availability of representative time-to-failure (TTF) trajectories either limits the performance of deep learning (DL)-based approaches on remaining useful life (RUL) prediction in practice or even precludes their application. Generating synthetic data that is physically plausible is a promising way to tackle this challenge. In this study, a novel hybrid framework combining the controlled physics-informed data generation approach with a deep learning-based prediction model for prognostics is proposed. In the proposed framework, a new controlled physics-informed generative adversarial network (CPI-GAN) is developed to generate synthetic degradation trajectories that are physically interpretable and diverse. Five basic physics constraints are proposed as the controllable settings in the generator. A physics-informed loss function with penalty is designed as the regularization term, which ensures that the changing trend of system health state recorded in the synthetic data is consistent with the underlying physical laws. Then, the generated synthetic data is used as input of the DL-based prediction model to obtain the RUL estimations. The proposed framework is evaluated based on new Commercial Modular Aero-Propulsion System Simulation (N-CMAPSS), a turbofan engine prognostics dataset where a limited avail-ability of TTF trajectories is assumed. The experimental results demonstrate that the proposed framework is able to generate synthetic TTF trajectories that are consistent with underlying degradation trends. The generated trajectories enable to significantly improve the accuracy of RUL predictions.

Katharina Rombach, Gabriel Michau, Wilfried Bürzle et al.

Monitoring the health of complex industrial assets is crucial for safe and efficient operations. Health indicators that provide quantitative real-time insights into the health status of industrial assets over time serve as valuable tools for e.g. fault detection or prognostics. This study proposes a novel, versatile and unsupervised approach to learn health indicators using contrastive learning, where the operational time serves as a proxy for degradation. To highlight its versatility, the approach is evaluated on two tasks and case studies with different characteristics: wear assessment of milling machines and fault detection of railway wheels. Our results show that the proposed methodology effectively learns a health indicator that follows the wear of milling machines (0.97 correlation on average) and is suitable for fault detection in railway wheels (88.7% balanced accuracy). The conducted experiments demonstrate the versatility of the approach for various systems and health conditions.

Zhichao Han, Olga Fink, David S. Kammer

Interacting systems are ubiquitous in nature and engineering, ranging from particle dynamics in physics to functionally connected brain regions. These interacting systems can be modeled by graphs where edges correspond to the interactions between interactive entities. Revealing interaction laws is of fundamental importance but also particularly challenging due to underlying configurational complexities. The associated challenges become exacerbated for heterogeneous systems that are prevalent in reality, where multiple interaction types coexist simultaneously and relational inference is required. Here, we propose a novel probabilistic method for relational inference, which possesses two distinctive characteristics compared to existing methods. First, it infers the interaction types of different edges collectively by explicitly encoding the correlation among incoming interactions with a joint distribution, and second, it allows handling systems with variable topological structure over time. We evaluate the proposed methodology across several benchmark datasets and demonstrate that it outperforms existing methods in accurately inferring interaction types. We further show that when combined with known constraints, it allows us, for example, to discover physics-consistent interaction laws of particle systems. Overall the proposed model is data-efficient and generalizable to large systems when trained on smaller ones. The developed methodology constitutes a key element for understanding interacting systems and may find application in graph structure learning.

Luca Biggio, Tommaso Bendinelli, Chetan Kulkarni et al.

Electrochemical batteries are ubiquitous devices in our society. When they are employed in mission-critical applications, the ability to precisely predict the end of discharge under highly variable environmental and operating conditions is of paramount importance in order to support operational decision-making. While there are accurate predictive models of the processes underlying the charge and discharge phases of batteries, the modelling of ageing and its effect on performance remains poorly understood. Such a lack of understanding often leads to inaccurate models or the need for time-consuming calibration procedures whenever the battery ages or its conditions change significantly. This represents a major obstacle to the real-world deployment of efficient and robust battery management systems. In this paper, we propose for the first time an approach that can predict the voltage discharge curve for batteries of any degradation level without the need for calibration. In particular, we introduce Dynaformer, a novel Transformer-based deep learning architecture which is able to simultaneously infer the ageing state from a limited number of voltage/current samples and predict the full voltage discharge curve for real batteries with high precision. Our experiments show that the trained model is effective for input current profiles of different complexities and is robust to a wide range of degradation levels. In addition to evaluating the performance of the proposed framework on simulated data, we demonstrate that a minimal amount of fine-tuning allows the model to bridge the simulation-to-real gap between simulations and real data collected from a set of batteries. The proposed methodology enables the utilization of battery-powered systems until the end of discharge in a controlled and predictable way, thereby significantly prolonging the operating cycles and reducing costs.

Pegah Rokhforoz, Olga Fink

Finding optimal bidding strategies for generation units in electricity markets would result in higher profit. However, it is a challenging problem due to the system uncertainty which is due to the unknown other generation units' strategies. Distributed optimization, where each entity or agent decides on its bid individually, has become state of the art. However, it cannot overcome the challenges of system uncertainties. Deep reinforcement learning is a promising approach to learn the optimal strategy in uncertain environments. Nevertheless, it is not able to integrate the information on the spatial system topology in the learning process. This paper proposes a distributed learning algorithm based on deep reinforcement learning (DRL) combined with a graph convolutional neural network (GCN). In fact, the proposed framework helps the agents to update their decisions by getting feedback from the environment so that it can overcome the challenges of the uncertainties. In this proposed algorithm, the state and connection between nodes are the inputs of the GCN, which can make agents aware of the structure of the system. This information on the system topology helps the agents to improve their bidding strategies and increase the profit. We evaluate the proposed algorithm on the IEEE 30-bus system under different scenarios. Also, to investigate the generalization ability of the proposed approach, we test the trained model on IEEE 39-bus system. The results show that the proposed algorithm has more generalization abilities compare to the DRL and can result in higher profit when changing the topology of the system.

Chi-Ching Hsu, Gaetan Frusque, Olga Fink

An important initial step in fault detection for complex industrial systems is gaining an understanding of their health condition. Subsequently, continuous monitoring of this health condition becomes crucial to observe its evolution, track changes over time, and isolate faults. As faults are typically rare occurrences, it is essential to perform this monitoring in an unsupervised manner. Various approaches have been proposed not only to detect faults in an unsupervised manner but also to distinguish between different potential fault types. In this study, we perform a comprehensive comparison between two residual-based approaches: autoencoders, and the input-output models that establish a mapping between operating conditions and sensor readings. We explore the sensor-wise residuals and aggregated residuals for the entire system in both methods. The performance evaluation focuses on three tasks: health indicator construction, fault detection, and health indicator interpretation. To perform the comparison, we utilize the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) dynamical model, specifically a subset of the turbofan engine dataset containing three different fault types. All models are trained exclusively on healthy data. Fault detection is achieved by applying a threshold that is determined based on the healthy condition. The detection results reveal that both models are capable of detecting faults with an average delay of around 20 cycles and maintain a low false positive rate. While the fault detection performance is similar for both models, the input-output model provides better interpretability regarding potential fault types and the possible faulty components.

Mengjie Zhao, Olga Fink

In the Industrial Internet of Things (IIoT), condition monitoring sensor signals from complex systems often exhibit nonlinear and stochastic spatial-temporal dynamics under varying conditions. These complex dynamics make fault detection particularly challenging. While previous methods effectively model these dynamics, they often neglect the evolution of relationships between sensor signals. Undetected shifts in these relationships can lead to significant system failures. Furthermore, these methods frequently misidentify novel operating conditions as faults. Addressing these limitations, we propose DyEdgeGAT (Dynamic Edge via Graph Attention), a novel approach for early-stage fault detection in IIoT systems. DyEdgeGAT's primary innovation lies in a novel graph inference scheme for multivariate time series that tracks the evolution of relationships between time series, enabled by dynamic edge construction. Another key innovation of DyEdgeGAT is its ability to incorporate operating condition contexts into node dynamics modeling, enhancing its accuracy and robustness. We rigorously evaluated DyEdgeGAT using both a synthetic dataset, simulating varying levels of fault severity, and a real-world industrial-scale multiphase flow facility benchmark with diverse fault types under varying operating conditions and detection complexities. The results show that DyEdgeGAT significantly outperforms other baseline methods in fault detection, particularly in the early stages with low severity, and exhibits robust performance under novel operating conditions.

Baorui Dai, Gaëtan Frusque, Tianfu Li et al.

The application of unsupervised domain adaptation (UDA)-based fault diagnosis methods has shown significant efficacy in industrial settings, facilitating the transfer of operational experience and fault signatures between different operating conditions, different units of a fleet or between simulated and real data. However, in real industrial scenarios, unknown levels and types of noise can amplify the difficulty of domain alignment, thus severely affecting the diagnostic performance of deep learning models. To address this issue, we propose an UDA method called Smart Filter-Aided Domain Adversarial Neural Network (SFDANN) for fault diagnosis in noisy industrial scenarios. The proposed methodology comprises two steps. In the first step, we develop a smart filter that dynamically enforces similarity between the source and target domain data in the time-frequency domain. This is achieved by combining a learnable wavelet packet transform network (LWPT) and a traditional wavelet packet transform module. In the second step, we input the data reconstructed by the smart filter into a domain adversarial neural network (DANN). To learn domain-invariant and discriminative features, the learnable modules of SFDANN are trained in a unified manner with three objectives: time-frequency feature proximity, domain alignment, and fault classification. We validate the effectiveness of the proposed SFDANN method based on two fault diagnosis cases: one involving fault diagnosis of bearings in noisy environments and another involving fault diagnosis of slab tracks in a train-track-bridge coupling vibration system, where the transfer task involves transferring from numerical simulations to field measurements. Results show that compared to other representative state of the art UDA methods, SFDANN exhibits superior performance and remarkable stability.

Hao Dong, Moru Liu, Kaiyang Zhou et al.

In real-world scenarios, achieving domain adaptation and generalization poses significant challenges, as models must adapt to or generalize across unknown target distributions. Extending these capabilities to unseen multimodal distributions, i.e., multimodal domain adaptation and generalization, is even more challenging due to the distinct characteristics of different modalities. Significant progress has been made over the years, with applications ranging from action recognition to semantic segmentation. Besides, the recent advent of large-scale pre-trained multimodal foundation models, such as CLIP, has inspired works leveraging these models to enhance adaptation and generalization performances or adapting them to downstream tasks. This survey provides the first comprehensive review of recent advances from traditional approaches to foundation models, covering: (1) Multimodal domain adaptation; (2) Multimodal test-time adaptation; (3) Multimodal domain generalization; (4) Domain adaptation and generalization with the help of multimodal foundation models; and (5) Adaptation of multimodal foundation models. For each topic, we formally define the problem and thoroughly review existing methods. Additionally, we analyze relevant datasets and applications, highlighting open challenges and potential future research directions. We maintain an active repository that contains up-to-date literature at https://github.com/donghao51/Awesome-Multimodal-Adaptation.

Vinay Sharma, Jens Ravesloot, Cees Taal et al.

In the presented work, we propose to apply the framework of graph neural networks (GNNs) to predict the dynamics of a rolling element bearing. This approach offers generalizability and interpretability, having the potential for scalable use in real-time operational digital twin systems for monitoring the health state of rotating machines. By representing the bearing's components as nodes in a graph, the GNN can effectively model the complex relationships and interactions among them. We utilize a dynamic spring-mass-damper model of a bearing to generate the training data for the GNN. In this model, discrete masses represent bearing components such as rolling elements, inner raceways, and outer raceways, while a Hertzian contact model is employed to calculate the forces between these components. We evaluate the learning and generalization capabilities of the proposed GNN framework by testing different bearing configurations that deviate from the training configurations. Through this approach, we demonstrate the effectiveness of the GNN-based method in accurately predicting the dynamics of rolling element bearings, highlighting its potential for real-time health monitoring of rotating machinery.

Moru Liu, Hao Dong, Jessica Kelly et al.

Out-of-distribution (OOD) detection and segmentation are crucial for deploying machine learning models in safety-critical applications such as autonomous driving and robot-assisted surgery. While prior research has primarily focused on unimodal image data, real-world applications are inherently multimodal, requiring the integration of multiple modalities for improved OOD detection. A key challenge is the lack of supervision signals from unknown data, leading to overconfident predictions on OOD samples. To address this challenge, we propose Feature Mixing, an extremely simple and fast method for multimodal outlier synthesis with theoretical support, which can be further optimized to help the model better distinguish between in-distribution (ID) and OOD data. Feature Mixing is modality-agnostic and applicable to various modality combinations. Additionally, we introduce CARLA-OOD, a novel multimodal dataset for OOD segmentation, featuring synthetic OOD objects across diverse scenes and weather conditions. Extensive experiments on SemanticKITTI, nuScenes, CARLA-OOD datasets, and the MultiOOD benchmark demonstrate that Feature Mixing achieves state-of-the-art performance with a $10 \times$ to $370 \times$ speedup. Our source code and dataset will be available at https://github.com/mona4399/FeatureMixing.

Hao Dong, Eleni Chatzi, Olga Fink

Test-time adaptation (TTA) has demonstrated significant potential in addressing distribution shifts between training and testing data. Open-set test-time adaptation (OSTTA) aims to adapt a source pre-trained model online to an unlabeled target domain that contains unknown classes. This task becomes more challenging when multiple modalities are involved. Existing methods have primarily focused on unimodal OSTTA, often filtering out low-confidence samples without addressing the complexities of multimodal data. In this work, we present Adaptive Entropy-aware Optimization (AEO), a novel framework specifically designed to tackle Multimodal Open-set Test-time Adaptation (MM-OSTTA) for the first time. Our analysis shows that the entropy difference between known and unknown samples in the target domain strongly correlates with MM-OSTTA performance. To leverage this, we propose two key components: Unknown-aware Adaptive Entropy Optimization (UAE) and Adaptive Modality Prediction Discrepancy Optimization (AMP). These components enhance the ability of model to distinguish unknown class samples during online adaptation by amplifying the entropy difference between known and unknown samples. To thoroughly evaluate our proposed methods in the MM-OSTTA setting, we establish a new benchmark derived from existing datasets. This benchmark includes two downstream tasks and incorporates five modalities. Extensive experiments across various domain shift situations demonstrate the efficacy and versatility of the AEO framework. Additionally, we highlight the strong performance of AEO in long-term and continual MM-OSTTA settings, both of which are challenging and highly relevant to real-world applications. Our source code is available at https://github.com/donghao51/AEO.

Zhichao Han, Mohit Pundir, Olga Fink et al.

Accurately modeling the mechanical behavior of materials is crucial for numerous engineering applications. The quality of these models depends directly on the accuracy of the constitutive law that defines the stress-strain relation. However, discovering these constitutive material laws remains a significant challenge, in particular when only material deformation data is available. To address this challenge, unsupervised machine learning methods have been proposed to learn the constitutive law from deformation data. Nonetheless, existing approaches have several limitations: they either fail to ensure that the learned constitutive relations are consistent with physical principles, or they rely on boundary force data for training which are unavailable in many in-situ scenarios. Here, we introduce a machine learning approach to learn physics-consistent constitutive relations solely from material deformation without boundary force information. This is achieved by considering a dynamic formulation rather than static equilibrium data and applying an input convex neural network (ICNN). We validate the effectiveness of the proposed method on a diverse range of hyperelastic material laws. We demonstrate that it is robust to a significant level of noise and that it converges to the ground truth with increasing data resolution. We also show that the model can be effectively trained using a displacement field from a subdomain of the test specimen and that the learned constitutive relation from one material sample is transferable to other samples with different geometries. The developed methodology provides an effective tool for discovering constitutive relations. It is, due to its design based on dynamics, particularly suited for applications to strain-rate-dependent materials and situations where constitutive laws need to be inferred from in-situ measurements without access to global force data.

Keivan Faghih Niresi, Mengjie Zhao, Hugo Bissig et al.

The use of Internet of Things (IoT) sensors for air pollution monitoring has significantly increased, resulting in the deployment of low-cost sensors. Despite this advancement, accurately calibrating these sensors in uncontrolled environmental conditions remains a challenge. To address this, we propose a novel approach that leverages graph neural networks, specifically the graph attention network module, to enhance the calibration process by fusing data from sensor arrays. Through our experiments, we demonstrate the effectiveness of our approach in significantly improving the calibration accuracy of sensors in IoT air pollution monitoring platforms.

Yuan Tian, Wenqi Zhou, Michele Viscione et al.

Symbolic Regression (SR) holds great potential for uncovering underlying mathematical and physical relationships from observed data. However, the vast combinatorial space of possible expressions poses significant challenges for both online search methods and pre-trained transformer models. Additionally, current state-of-the-art approaches typically do not consider the integration of domain experts' prior knowledge and do not support iterative interactions with the model during the equation discovery process. To address these challenges, we propose the Symbolic Q-network (Sym-Q), an advanced interactive framework for large-scale symbolic regression. Unlike previous large-scale transformer-based SR approaches, Sym-Q leverages reinforcement learning without relying on a transformer-based decoder. This formulation allows the agent to learn through offline reinforcement learning using any type of tree encoder, enabling more efficient training and inference. Furthermore, we propose a co-design mechanism, where the reinforcement learning-based Sym-Q facilitates effective interaction with domain experts at any stage of the equation discovery process. Users can dynamically modify generated nodes of the expression, collaborating with the agent to tailor the mathematical expression to best fit the problem and align with the assumed physical laws, particularly when there is prior partial knowledge of the expected behavior. Our experiments demonstrate that the pre-trained Sym-Q surpasses existing SR algorithms on the challenging SSDNC benchmark. Moreover, we experimentally show on real-world cases that its performance can be further enhanced by the interactive co-design mechanism, with Sym-Q achieving greater performance gains than other state-of-the-art models. Our reproducible code is available at https://github.com/EPFL-IMOS/Sym-Q.

Han Sun, Rui Gong, Ismail Nejjar et al.

Current unsupervised domain adaptation (UDA) methods for semantic segmentation typically assume identical class labels between the source and target domains. This assumption ignores the label-level domain gap, which is common in real-world scenarios, thus limiting their ability to identify finer-grained or novel categories without requiring extensive manual annotation. A promising direction to address this limitation lies in recent advancements in foundation models, which exhibit strong generalization abilities due to their rich prior knowledge. However, these models often struggle with domain-specific nuances and underrepresented fine-grained categories. To address these challenges, we introduce DynAlign, a framework that integrates UDA with foundation models to bridge both the image-level and label-level domain gaps. Our approach leverages prior semantic knowledge to align source categories with target categories that can be novel, more fine-grained, or named differently (e.g., vehicle to {car, truck, bus}). Foundation models are then employed for precise segmentation and category reassignment. To further enhance accuracy, we propose a knowledge fusion approach that dynamically adapts to varying scene contexts. DynAlign generates accurate predictions in a new target label space without requiring any manual annotations, allowing seamless adaptation to new taxonomies through either model retraining or direct inference. Experiments on the street scene semantic segmentation benchmarks GTA to Mapillary Vistas and GTA to IDD validate the effectiveness of our approach, achieving a significant improvement over existing methods. Our code will be publicly available.

Keivan Faghih Niresi, Ismail Nejjar, Olga Fink

The growing deployment of low-cost, distributed sensor networks in environmental and biomedical domains has enabled continuous, large-scale health monitoring. However, these systems often face challenges related to degraded data quality caused by sensor drift, noise, and insufficient calibration -- factors that limit their reliability in real-world applications. Traditional machine learning methods for sensor fusion and calibration rely on extensive feature engineering and struggle to capture spatial-temporal dependencies or adapt to distribution shifts across varying deployment conditions. To address these challenges, we propose a novel unsupervised domain adaptation (UDA) method tailored for regression tasks. Our proposed method integrates effectively with Spatial-Temporal Graph Neural Networks and leverages the alignment of perturbed inverse Gram matrices between source and target domains, drawing inspiration from Tikhonov regularization. This approach enables scalable and efficient domain adaptation without requiring labeled data in the target domain. We validate our novel method on real-world datasets from two distinct applications: air quality monitoring and EEG signal reconstruction. Our method achieves state-of-the-art performance which paves the way for more robust and transferable sensor fusion models in both environmental and physiological contexts. Our code is available at https://github.com/EPFL-IMOS/TikUDA.

Yuan Tian, Wenqi Zhou, Michele Viscione et al.

Symbolic Regression (SR) holds great potential for uncovering underlying mathematical and physical relationships from observed data. However, the vast combinatorial space of possible expressions poses significant challenges for both online search methods and pre-trained transformer models. Additionally, current state-of-the-art approaches typically do not consider the integration of domain experts' prior knowledge and do not support iterative interactions with the model during the equation discovery process. To address these challenges, we propose the Symbolic Q-network (Sym-Q), an advanced interactive framework for large-scale symbolic regression. Unlike previous large-scale transformer-based SR approaches, Sym-Q leverages reinforcement learning without relying on a transformer-based decoder. This formulation allows the agent to learn through offline reinforcement learning using any type of tree encoder, enabling more efficient training and inference. Furthermore, we propose a co-design mechanism, where the reinforcement learning-based Sym-Q facilitates effective interaction with domain experts at any stage of the equation discovery process. Users can dynamically modify generated nodes of the expression, collaborating with the agent to tailor the mathematical expression to best fit the problem and align with the assumed physical laws, particularly when there is prior partial knowledge of the expected behavior. Our experiments demonstrate that the pre-trained Sym-Q surpasses existing SR algorithms on the challenging SSDNC benchmark. Moreover, we experimentally show on real-world cases that its performance can be further enhanced by the interactive co-design mechanism, with Sym-Q achieving greater performance gains than other state-of-the-art models. Our reproducible code is available at https://github.com/EPFL-IMOS/Sym-Q.

Zepeng Zhang, Olga Fink

Detecting and localizing leakages is a significant challenge for the efficient and sustainable management of water distribution networks (WDN). Leveraging the inherent graph structure of WDNs, recent approaches have used graph-based data-driven methods. However, these methods often learn shortcuts that work well with in-distribution data but fail to generalize to out-of-distribution data. To address this limitation and inspired by the perfect generalization ability of classical algorithms, we propose an algorithm-informed graph neural network (AIGNN). Recognizing that WDNs function as flow networks, incorporating max-flow information can be beneficial for inferring pressures. In the proposed framework, we first train AIGNN to emulate the Ford-Fulkerson algorithm for solving max-flow problems. This algorithmic knowledge is then transferred to address the pressure estimation problem in WDNs. Two AIGNNs are deployed, one to reconstruct pressure based on the current measurements, and another to predict pressure based on previous measurements. Leakages are detected and localized by comparing the outputs of the reconstructor and the predictor. By pretraining AIGNNs to reason like algorithms, they are expected to extract more task-relevant and generalizable features. Experimental results demonstrate that the proposed algorithm-informed approach achieves superior results with better generalization ability compared to GNNs that do not incorporate algorithmic knowledge.

Florent Forest, Amaury Wei, Olga Fink

Time series extrinsic regression (TSER) refers to the task of predicting a continuous target variable from an input time series. It appears in many domains, including healthcare, finance, environmental monitoring, and engineering. In these settings, accurate predictions and trustworthy reasoning are both essential. Although state-of-the-art TSER models achieve strong predictive performance, they typically operate as black boxes, making it difficult to understand which temporal patterns drive their decisions. Post-hoc interpretability techniques, such as feature attribution, aim to to explain how the model arrives at its predictions, but often produce coarse, noisy, or unstable explanations. Recently, inherently interpretable approaches based on concepts, additive decompositions, or symbolic regression, have emerged as promising alternatives. However, these approaches remain limited: they require explicit supervision on the concepts themselves, often cannot capture interactions between time-series features, lack expressiveness for complex temporal patterns, and struggle to scale to high-dimensional multivariate data. To address these limitations, we propose MAGNETS (Mask-and-AGgregate NEtwork for Time Series), an inherently interpretable neural architecture for TSER. MAGNETS learns a compact set of human-understandable concepts without requiring any annotations. Each concept corresponds to a learned, mask-based aggregation over selected input features, explicitly revealing both which features drive predictions and when they matter in the sequence. Predictions are formed as combinations of these learned concepts through a transparent, additive structure, enabling clear insight into the model's decision process.

Keivan Faghih Niresi, Zepeng Zhang, Olga Fink

Time series data are often affected by various forms of corruption, such as missing values, noise, and outliers, which pose significant challenges for tasks such as forecasting and anomaly detection. To address these issues, inverse problems focus on reconstructing the original signal from corrupted data by leveraging prior knowledge about its underlying structure. While deep learning methods have demonstrated potential in this domain, they often require extensive pretraining and struggle to generalize under distribution shifts. In this work, we propose RINS-T (Robust Implicit Neural Solvers for Time Series Linear Inverse Problems), a novel deep prior framework that achieves high recovery performance without requiring pretraining data. RINS-T leverages neural networks as implicit priors and integrates robust optimization techniques, making it resilient to outliers while relaxing the reliance on Gaussian noise assumptions. To further improve optimization stability and robustness, we introduce three key innovations: guided input initialization, input perturbation, and convex output combination techniques. Each of these contributions strengthens the framework's optimization stability and robustness. These advancements make RINS-T a flexible and effective solution for addressing complex real-world time series challenges. Our code is available at https://github.com/EPFL-IMOS/RINS-T.

Gabriel Michau, Gaetan Frusque, Olga Fink

High-Frequency (HF) signals are ubiquitous in the industrial world and are of great use for monitoring of industrial assets. Most deep learning tools are designed for inputs of fixed and/or very limited size and many successful applications of deep learning to the industrial context use as inputs extracted features, which is a manually and often arduously obtained compact representation of the original signal. In this paper, we propose a fully unsupervised deep learning framework that is able to extract a meaningful and sparse representation of raw HF signals. We embed in our architecture important properties of the fast discrete wavelet transformation (FDWT) such as (1) the cascade algorithm, (2) the conjugate quadrature filter property that links together the wavelet, the scaling and transposed filter functions, and (3) the coefficient denoising. Using deep learning, we make this architecture fully learnable: both the wavelet bases and the wavelet coefficient denoising are learnable. To achieve this objective, we propose a new activation function that performs a learnable hard-thresholding of the wavelet coefficients. With our framework, the denoising FDWT becomes a fully learnable unsupervised tool that does neither require any type of pre- nor post-processing, nor any prior knowledge on wavelet transform. We demonstrate the benefits of embedding all these properties on three machine-learning tasks performed on open source sound datasets. We perform an ablation study of the impact of each property on the performance of the architecture, achieve results well above baseline and outperform other state-of-the-art methods.

Qin Wang, Dengxin Dai, Lukas Hoyer et al.

Domain adaptation for semantic segmentation aims to improve the model performance in the presence of a distribution shift between source and target domain. Leveraging the supervision from auxiliary tasks~(such as depth estimation) has the potential to heal this shift because many visual tasks are closely related to each other. However, such a supervision is not always available. In this work, we leverage the guidance from self-supervised depth estimation, which is available on both domains, to bridge the domain gap. On the one hand, we propose to explicitly learn the task feature correlation to strengthen the target semantic predictions with the help of target depth estimation. On the other hand, we use the depth prediction discrepancy from source and target depth decoders to approximate the pixel-wise adaptation difficulty. The adaptation difficulty, inferred from depth, is then used to refine the target semantic segmentation pseudo-labels. The proposed method can be easily implemented into existing segmentation frameworks. We demonstrate the effectiveness of our approach on the benchmark tasks SYNTHIA-to-Cityscapes and GTA-to-Cityscapes, on which we achieve the new state-of-the-art performance of $55.0\%$ and $56.6\%$, respectively. Our code is available at \url{https://qin.ee/corda}.

Gabriel Michau, Olga Fink

Anomaly Detectors are trained on healthy operating condition data and raise an alarm when the measured samples deviate from the training data distribution. This means that the samples used to train the model should be sufficient in quantity and representative of the healthy operating conditions. But for industrial systems subject to changing operating conditions, acquiring such comprehensive sets of samples requires a long collection period and delay the point at which the anomaly detector can be trained and put in operation. A solution to this problem is to perform unsupervised transfer learning (UTL), to transfer complementary data between different units. In the literature however, UTL aims at finding common structure between the datasets, to perform clustering or dimensionality reduction. Yet, the task of transferring and combining complementary training data has not been studied. Our proposed framework is designed to transfer complementary operating conditions between different units in a completely unsupervised way to train more robust anomaly detectors. It differs, thereby, from other unsupervised transfer learning works as it focuses on a one-class classification problem. The proposed methodology enables to detect anomalies in operating conditions only experienced by other units. The proposed end-to-end framework uses adversarial deep learning to ensure alignment of the different units' distributions. The framework introduces a new loss, inspired by a dimensionality reduction tool, to enforce the conservation of the inherent variability of each dataset, and uses state-of-the art once-class approach to detect anomalies. We demonstrate the benefit of the proposed framework using three open source datasets.

Yuan Tian, Qin Wang, Zhiwu Huang et al.

In this paper, we introduce a new reinforcement learning (RL) based neural architecture search (NAS) methodology for effective and efficient generative adversarial network (GAN) architecture search. The key idea is to formulate the GAN architecture search problem as a Markov decision process (MDP) for smoother architecture sampling, which enables a more effective RL-based search algorithm by targeting the potential global optimal architecture. To improve efficiency, we exploit an off-policy GAN architecture search algorithm that makes efficient use of the samples generated by previous policies. Evaluation on two standard benchmark datasets (i.e., CIFAR-10 and STL-10) demonstrates that the proposed method is able to discover highly competitive architectures for generally better image generation results with a considerably reduced computational burden: 7 GPU hours. Our code is available at https://github.com/Yuantian013/E2GAN.

Leandro Von Krannichfeldt, Kristina Orehounig, Olga Fink

Building energy modeling plays a vital role in optimizing the operation of building energy systems by providing accurate predictions of the building's real-world conditions. In this context, various techniques have been explored, ranging from traditional physics-based models to data-driven models. Recently, researchers are combining physics-based and data-driven models into hybrid approaches. This includes using the physics-based model output as additional data-driven input, learning the residual between physics-based model and real data, learning a surrogate of the physics-based model, or fine-tuning a surrogate model with real data. However, a comprehensive comparison of the inherent advantages of these hybrid approaches is still missing. The primary objective of this work is to evaluate four predominant hybrid approaches in building energy modeling through a real-world case study, with focus on indoor thermodynamics. To achieve this, we devise three scenarios reflecting common levels of building documentation and sensor availability, assess their performance, and analyze their explainability using hierarchical Shapley values. The real-world study reveals three notable findings. First, greater building documentation and sensor availability lead to higher prediction accuracy for hybrid approaches. Second, the performance of hybrid approaches depends on the type of building room, but the residual approach using a Feedforward Neural Network as data-driven sub-model performs best on average across all rooms. This hybrid approach also demonstrates a superior ability to leverage the simulation from the physics-based sub-model. Third, hierarchical Shapley values prove to be an effective tool for explaining and improving hybrid models while accounting for input correlations.

Ismail Nejjar, Hao Dong, Olga Fink

Open-set Domain Adaptation (OSDA) aims to adapt a model from a labeled source domain to an unlabeled target domain, where novel classes - also referred to as target-private unknown classes - are present. Source-free Open-set Domain Adaptation (SF-OSDA) methods address OSDA without accessing labeled source data, making them particularly relevant under privacy constraints. However, SF-OSDA presents significant challenges due to distribution shifts and the introduction of novel classes. Existing SF-OSDA methods typically rely on thresholding the prediction entropy of a sample to identify it as either a known or unknown class, but fail to explicitly learn discriminative features for the target-private unknown classes. We propose Recall and Refine (RRDA), a novel SF-OSDA framework designed to address these limitations by explicitly learning features for target-private unknown classes. RRDA employs a two-stage process. First, we enhance the model's capacity to recognize unknown classes by training a target classifier with an additional decision boundary,guided by synthetic samples generated from target domain features. This enables the classifier to effectively separate known and unknown classes. Second, we adapt the entire model to the target domain, addressing both domain shifts and distinguishability to unknown classes. Any off-the-shelf source-free domain adaptation method (e.g. SHOT, AaD) can be seamlessly integrated into our framework at this stage. Extensive experiments on three benchmark datasets demonstrate that RRDA significantly outperforms existing SF-OSDA and OSDA methods.

Keivan Faghih Niresi, Hugo Bissig, Henri Baumann et al.

The Industrial Internet of Things (IIoT) is reshaping manufacturing, industrial processes, and infrastructure management. By fostering new levels of automation, efficiency, and predictive maintenance, IIoT is transforming traditional industries into intelligent, seamlessly interconnected ecosystems. However, achieving highly reliable IIoT can be hindered by factors such as the cost of installing large numbers of sensors, limitations in retrofitting existing systems with sensors, or harsh environmental conditions that may make sensor installation impractical. Soft (virtual) sensing leverages mathematical models to estimate variables from physical sensor data, offering a solution to these challenges. Data-driven and physics-based modeling are the two main methodologies widely used for soft sensing. The choice between these strategies depends on the complexity of the underlying system, with the data-driven approach often being preferred when the physics-based inference models are intricate and present challenges for state estimation. However, conventional deep learning models are typically hindered by their inability to explicitly represent the complex interactions among various sensors. To address this limitation, we adopt Graph Neural Networks (GNNs), renowned for their ability to effectively capture the complex relationships between sensor measurements. In this research, we propose physics-enhanced GNNs, which integrate principles of physics into graph-based methodologies. This is achieved by augmenting additional nodes in the input graph derived from the underlying characteristics of the physical processes. Our evaluation of the proposed methodology on the case study of district heating networks reveals significant improvements over purely data-driven GNNs, even in the presence of noise and parameter inaccuracies.