Teemu Hakala

Aleksi Karhunen, Teemu Hakala, Väinö Karjalainen et al.

Interest in utilizing autonomous uncrewed aerial vehicles (UAVs) for under-canopy forest remote sensing has increased in recent years, resulting in the publication of numerous autonomous flight algorithms in the scientific literature. To support the selection and development of such algorithms, a reliable comparison of existing approaches based on published studies is essential. However, reliable comparisons are currently challenging due to widely varying experimental setups and incomplete reporting practices. This study proposes a standardized experimental setup for evaluating autonomous under-canopy UAV systems to fill this gap. The proposed setup emphasizes quantitative reporting of forest complexity, visual representation of test environments, execution of multiple repeated flights, and reporting of flight success rates alongside qualitative flight results. In addition, flights at multiple target speeds are encouraged, with reporting of realized flight speed, mission completion time, and point-to-point flight distance. The proposed setup is demonstrated using a lightweight lidar-based quadrotor employing state-of-the-art open-source algorithms, evaluated through extensive experiments in two natural boreal forest environments. Based on a systematic evaluation of the original system, several improvements were introduced. The same experimental protocol was then repeated with the optimized system, resulting in a total of 93 real-world flights. The optimized system achieved success rates of 12/15 and 15/15 at target flight speeds of 1 m/s and 2 m/s, respectively, in a medium-difficulty forest, and 12/15 and 5/15 in a difficult forest. Adoption of the proposed experimental setup would facilitate the literature-based comparison of autonomous under-canopy flight systems and support systematic performance improvement of future UAV-based forest robotics solutions.

Väinö Karjalainen, Niko Koivumäki, Teemu Hakala et al.

Drones are increasingly used in forestry to capture high-resolution remote sensing data, supporting enhanced monitoring, assessment, and decision-making processes. While operations above the forest canopy are already highly automated, flying inside forests remains challenging, primarily relying on manual piloting. In dense forests, relying on the Global Navigation Satellite System (GNSS) for localization is not feasible. In addition, the drone must autonomously adjust its flight path to avoid collisions. Recently, advancements in robotics have enabled autonomous drone flights in GNSS-denied obstacle-rich areas. In this article, a step towards autonomous forest data collection is taken by building a prototype of a robotic under-canopy drone utilizing state-of-the-art open source methods and validating its performance for data collection inside forests. Specifically, the study focused on camera-based autonomous flight under the forest canopy and photogrammetric post-processing of the data collected with the low-cost onboard stereo camera. The autonomous flight capability of the prototype was evaluated through multiple test flights in boreal forests. The tree parameter estimation capability was studied by performing diameter at breast height (DBH) estimation. The prototype successfully carried out flights in selected challenging forest environments, and the experiments showed promising performance in forest 3D modeling with a miniaturized stereoscopic photogrammetric system. The DBH estimation achieved a root mean square error (RMSE) of 3.33 - 3.97 cm (10.69 - 12.98 %) across all trees. For trees with a DBH less than 30 cm, the RMSE was 1.16 - 2.56 cm (5.74 - 12.47 %). The results provide valuable insights into autonomous under-canopy forest mapping and highlight the critical next steps for advancing lightweight robotic drone systems for mapping complex forest environments.