Francesca Meneghello

Francesc Wilhelmi, Boris Bellalta, Giovanni Geraci et al.

The IEEE 802.11bn amendment defines significant modifications to the standard by establishing Ultra High Reliability (UHR) targets in Wireless Local Area Networks (WLANs). This is expected to deliver substantial enhancements over previous standards, including modes of operation that increase throughput, reduce the 95th percentile of the latency distribution, and decrease MAC Protocol Data Unit (MPDU) loss (all by at least 25%) compared to Extremely High Throughput (EHT) operations defined in the 802.11be amendment. A fundamental innovation for achieving these ambitious goals is the introduction of Multi-Access Point Coordination (MAPC), an unprecedented feature whereby APs will be able to coordinate among themselves to enhance spectrum utilization and advance towards reliability. This paper provides a comprehensive overview and analysis of this key framework. We begin by reviewing existing AP coordination solutions that precede the 802.11bn standard, which serve as a foundation for understanding the transition to the current framework. We then describe the technical 802.11bn MAPC framework as defined by the task group. A detailed overview of each candidate MAPC feature is provided, contextualized with the relevant state-of-the-art. Furthermore, we introduce Kom8ndor, an open-source Wi-Fi 8 simulation tool, to evaluate these candidate MAPC features and showcase their potential to achieve UHR goals. Finally, we outline the future of MAPC beyond 802.11bn, exploring promising directions such as coordination schemes beyond 802.11bn (e.g., Joint Transmission (JT)) and new ideas.

Francesca Meneghello, Michele Rossi, Francesco Restuccia

We present DeepCSI, a novel approach to Wi-Fi radio fingerprinting (RFP) which leverages standard-compliant beamforming feedback matrices to authenticate MU-MIMO Wi-Fi devices on the move. By capturing unique imperfections in off-the-shelf radio circuitry, RFP techniques can identify wireless devices directly at the physical layer, allowing low-latency low-energy cryptography-free authentication. However, existing Wi-Fi RFP techniques are based on software-defined radio (SDRs), which may ultimately prevent their widespread adoption. Moreover, it is unclear whether existing strategies can work in the presence of MU-MIMO transmitters - a key technology in modern Wi-Fi standards. Conversely from prior work, DeepCSI does not require SDR technologies and can be run on any low-cost Wi-Fi device to authenticate MU-MIMO transmitters. Our key intuition is that imperfections in the transmitter's radio circuitry percolate onto the beamforming feedback matrix, and thus RFP can be performed without explicit channel state information (CSI) computation. DeepCSI is robust to inter-stream and inter-user interference being the beamforming feedback not affected by those phenomena. We extensively evaluate the performance of DeepCSI through a massive data collection campaign performed in the wild with off-the-shelf equipment, where 10 MU-MIMO Wi-Fi radios emit signals in different positions. Experimental results indicate that DeepCSI correctly identifies the transmitter with an accuracy of up to 98%. The identification accuracy remains above 82% when the device moves within the environment. To allow replicability and provide a performance benchmark, we pledge to share the 800 GB datasets - collected in static and, for the first time, dynamic conditions - and the code database with the community.

Francesca Meneghello, Nicolò Dal Fabbro, Domenico Garlisi et al.

In the last years, several machine learning-based techniques have been proposed to monitor human movements from Wi-Fi channel readings. However, the development of domain-adaptive algorithms that robustly work across different environments is still an open problem, whose solution requires large datasets characterized by strong domain diversity, in terms of environments, persons and Wi-Fi hardware. To date, the few public datasets available are mostly obsolete - as obtained via Wi-Fi devices operating on 20 or 40 MHz bands - and contain little or no domain diversity, thus dramatically limiting the advancements in the design of sensing algorithms. The present contribution aims to fill this gap by providing a dataset of IEEE 802.11ac channel measurements over an 80 MHz bandwidth channel featuring notable domain diversity, through measurement campaigns that involved thirteen subjects across different environments, days, and with different hardware. Novel experimental data is provided by blocking the direct path between the transmitter and the monitor, and collecting measurements in a semi-anechoic chamber (no multi-path fading). Overall, the dataset - available on IEEE DataPort [1] - contains more than thirteen hours of channel state information readings (23.6 GB), allowing researchers to test activity/identity recognition and people counting algorithms.

Stefano Branchi, Andrei Buliga, Chiara Di Francescomarino et al.

Prescriptive Process Monitoring is a prominent problem in Process Mining, which consists in identifying a set of actions to be recommended with the goal of optimising a target measure of interest or Key Performance Indicator (KPI). One challenge that makes this problem difficult is the need to provide Prescriptive Process Monitoring techniques only based on temporally annotated (process) execution data, stored in, so-called execution logs, due to the lack of well crafted and human validated explicit models. In this paper we aim at proposing an AI based approach that learns, by means of Reinforcement Learning (RL), an optimal policy (almost) only from the observation of past executions and recommends the best activities to carry on for optimizing a KPI of interest. This is achieved first by learning a Markov Decision Process for the specific KPIs from data, and then by using RL training to learn the optimal policy. The approach is validated on real and synthetic datasets and compared with off-policy Deep RL approaches. The ability of our approach to compare with, and often overcome, Deep RL approaches provides a contribution towards the exploitation of white box RL techniques in scenarios where only temporal execution data are available.

Khandaker Foysal Haque, Francesca Meneghello, Md. Ebtidaul Karim et al.

Emerging mobile virtual reality (VR) systems will require to continuously perform complex computer vision tasks on ultra-high-resolution video frames through the execution of deep neural networks (DNNs)-based algorithms. Since state-of-the-art DNNs require computational power that is excessive for mobile devices, techniques based on wireless edge computing (WEC) have been recently proposed. However, existing WEC methods require the transmission and processing of a high amount of video data which may ultimately saturate the wireless link. In this paper, we propose a novel Sensing-Assisted Wireless Edge Computing (SAWEC) paradigm to address this issue. SAWEC leverages knowledge about the physical environment to reduce the end-to-end latency and overall computational burden by transmitting to the edge server only the relevant data for the delivery of the service. Our intuition is that the transmission of the portion of the video frames where there are no changes with respect to previous frames can be avoided. Specifically, we leverage wireless sensing techniques to estimate the location of objects in the environment and obtain insights about the environment dynamics. Hence, only the part of the frames where any environmental change is detected is transmitted and processed. We evaluated SAWEC by using a 10K 360$^{\circ}$ with a Wi-Fi 6 sensing system operating at 160 MHz and performing localization and tracking. We considered instance segmentation and object detection as benchmarking tasks for performance evaluation. We carried out experiments in an anechoic chamber and an entrance hall with two human subjects in six different setups. Experimental results show that SAWEC reduces both the channel occupation and end-to-end latency by more than 90% while improving the instance segmentation and object detection performance with respect to state-of-the-art WEC approaches.

Riccardo Graziosi, Massimiliano Ronzani, Andrei Buliga et al.

In recent years, trace generation has emerged as a significant challenge within the Process Mining community. Deep Learning (DL) models have demonstrated accuracy in reproducing the features of the selected processes. However, current DL generative models are limited in their ability to adapt the learned distributions to generate data samples based on specific conditions or attributes. This limitation is particularly significant because the ability to control the type of generated data can be beneficial in various contexts, enabling a focus on specific behaviours, exploration of infrequent patterns, or simulation of alternative 'what-if' scenarios. In this work, we address this challenge by introducing a conditional model for process data generation based on a conditional variational autoencoder (CVAE). Conditional models offer control over the generation process by tuning input conditional variables, enabling more targeted and controlled data generation. Unlike other domains, CVAE for process mining faces specific challenges due to the multiperspective nature of the data and the need to adhere to control-flow rules while ensuring data variability. Specifically, we focus on generating process executions conditioned on control flow and temporal features of the trace, allowing us to produce traces for specific, identified sub-processes. The generated traces are then evaluated using common metrics for generative model assessment, along with additional metrics to evaluate the quality of the conditional generation

Francesca Meneghello, Domenico Garlisi, Nicolò Dal Fabbro et al.

In this article we present SHARP, an original approach for obtaining human activity recognition (HAR) through the use of commercial IEEE 802.11 (Wi-Fi) devices. SHARP grants the possibility to discern the activities of different persons, across different time-spans and environments. To achieve this, we devise a new technique to clean and process the channel frequency response (CFR) phase of the Wi-Fi channel, obtaining an estimate of the Doppler shift at a radio monitor device. The Doppler shift reveals the presence of moving scatterers in the environment, while not being affected by (environment-specific) static objects. SHARP is trained on data collected as a person performs seven different activities in a single environment. It is then tested on different setups, to assess its performance as the person, the day and/or the environment change with respect to those considered at training time. In the worst-case scenario, it reaches an average accuracy higher than 95%, validating the effectiveness of the extracted Doppler information, used in conjunction with a learning algorithm based on a neural network, in recognizing human activities in a subject and environment independent way. The collected CFR dataset and the code are publicly available for replicability and benchmarking purposes.