Moustafa Youssef

Mohamed Mohsen, Hamada Rizk, Moustafa Youssef

Indoor localization systems have become increasingly important in a wide range of applications, including industry, security, logistics, and emergency services. However, the growing demand for accurate localization has heightened concerns over privacy, as many localization systems rely on active signals that can be misused by an adversary to track users' movements or manipulate their measurements. This paper presents PassiFi, a novel passive Wi-Fi time-based indoor localization system that effectively balances accuracy and privacy. PassiFi uses a passive WiFi Time Difference of Arrival (TDoA) approach that ensures users' privacy and safeguards the integrity of their measurement data while still achieving high accuracy. The system adopts a fingerprinting approach to address multi-path and non-line-of-sight problems and utilizes deep neural networks to learn the complex relationship between TDoA and location. Evaluation in a real-world testbed demonstrates PassiFi's exceptional performance, surpassing traditional multilateration by 128%, achieving sub-meter accuracy on par with state-of-the-art active measurement systems, all while preserving privacy.

Mohamed Mohsen, Hamada Rizk, Hirozumi Yamaguch et al.

Locating the persons moving through an environment without the necessity of them being equipped with special devices has become vital for many applications including security, IoT, healthcare, etc. Existing device-free indoor localization systems commonly rely on the utilization of Received Signal Strength Indicator (RSSI) and WiFi Channel State Information (CSI) techniques. However, the accuracy of RSSI is adversely affected by environmental factors like multi-path interference and fading. Additionally, the lack of standardization in CSI necessitates the use of specialized hardware and software. In this paper, we present TimeSense, a deep learning-based multi-person device-free indoor localization system that addresses these challenges. TimeSense leverages Time of Flight information acquired by the fine-time measurement protocol of IEEE 802.11-2016 standard. Specifically, the measured round trip time between the transmitter and receiver is influenced by the dynamic changes in the environment induced by human presence. TimeSense effectively detects this anomalous behavior using a stacked denoising auto-encoder model, thereby estimating the user's location. The system incorporates a probabilistic approach on top of the deep learning model to ensure seamless tracking of the users. The evaluation of TimeSene in two realistic environments demonstrates its efficacy, achieving a median localization accuracy of 1.57 and 2.65 meters. This surpasses the performance of state-of-the-art techniques by 49% and 103% in the two testbeds.

Marwah Sulaiman, Zahraa Shehabeldin, Israa Fahmy et al.

Recently, video super resolution (VSR) has become a very impactful task in the area of Computer Vision due to its various applications. In this paper, we propose Recurrent Back-Projection Generative Adversarial Network (RBPGAN) for VSR in an attempt to generate temporally coherent solutions while preserving spatial details. RBPGAN integrates two state-of-the-art models to get the best in both worlds without compromising the accuracy of produced video. The generator of the model is inspired by RBPN system, while the discriminator is inspired by TecoGAN. We also utilize Ping-Pong loss to increase temporal consistency over time. Our contribution together results in a model that outperforms earlier work in terms of temporally consistent details, as we will demonstrate qualitatively and quantitatively using different datasets.

Ahmed Jaheen, Sarah Elsamanody, Hamada Rizk et al.

Indoor localization plays a pivotal role in supporting a wide array of location-based services, including navigation, security, and context-aware computing within intricate indoor environments. Despite considerable advancements, deploying indoor localization systems in real-world scenarios remains challenging, largely because of non-independent and identically distributed (non-IID) data and device heterogeneity. In response, we propose SimDeep, a novel Federated Learning (FL) framework explicitly crafted to overcome these obstacles and effectively manage device heterogeneity. SimDeep incorporates a Similarity Aggregation Strategy, which aggregates client model updates based on data similarity, significantly alleviating the issues posed by non-IID data. Our experimental evaluations indicate that SimDeep achieves an impressive accuracy of 92.89%, surpassing traditional federated and centralized techniques, thus underscoring its viability for real-world deployment.

Zhuoxuan Liang, Wei Li, Dalin Zhang et al.

With the rapid growth of the Internet of Things and Cyber-Physical Systems, widespread sensor deployment has become essential. However, the high costs of building sensor networks limit their scale and coverage, making fine-grained deployment challenging. Inductive Spatio-Temporal Kriging (ISK) addresses this issue by introducing virtual sensors. Based on graph neural networks (GNNs) extracting the relationships between physical and virtual sensors, ISK can infer the measurements of virtual sensors from physical sensors. However, current ISK methods rely on conventional message-passing mechanisms and network architectures, without effectively extracting spatio-temporal features of physical sensors and focusing on representing virtual sensors. Additionally, existing graph construction methods face issues of sparse and noisy connections, destroying ISK performance. To address these issues, we propose DarkFarseer, a novel ISK framework with three key components. First, we propose the Neighbor Hidden Style Enhancement module with a style transfer strategy to enhance the representation of virtual nodes in a temporal-then-spatial manner to better extract the spatial relationships between physical and virtual nodes. Second, we propose Virtual-Component Contrastive Learning, which aims to enrich the node representation by establishing the association between the patterns of virtual nodes and the regional patterns within graph components. Lastly, we design a Similarity-Based Graph Denoising Strategy, which reduces the connectivity strength of noisy connections around virtual nodes and their neighbors based on their temporal information and regional spatial patterns. Extensive experiments demonstrate that DarkFarseer significantly outperforms existing ISK methods.

Osama T. Ibrahim, Walid Gomaa, Moustafa Youssef

Counting humans is an essential part of many people-centric applications. In this paper, we propose CrossCount: an accurate deep-learning-based human count estimator that uses a single WiFi link to estimate the human count in an area of interest. The main idea is to depend on the temporal link-blockage pattern as a discriminant feature that is more robust to wireless channel noise than the signal strength, hence delivering a ubiquitous and accurate human counting system. As part of its design, CrossCount addresses a number of deep learning challenges such as class imbalance and training data augmentation for enhancing the model generalizability. Implementation and evaluation of CrossCount in multiple testbeds show that it can achieve a human counting accuracy to within a maximum of 2 persons 100% of the time. This highlights the promise of CrossCount as a ubiquitous crowd estimator with non-labour-intensive data collection from off-the-shelf devices.

Ali AbdelAziz, Amin Shoukry, Walid Gomaa et al.

Developing countries suffer from traffic congestion, poorly planned road/rail networks, and lack of access to public transportation facilities. This context results in an increase in fuel consumption, pollution level, monetary losses, massive delays, and less productivity. On the other hand, it has a negative impact on the commuters feelings and moods. Availability of real-time transit information - by providing public transportation vehicles locations using GPS devices - helps in estimating a passenger's waiting time and addressing the above issues. However, such solution is expensive for developing countries. This paper aims at designing and implementing a crowd-sourced mobile phones-based solution to estimate the expected waiting time of a passenger in public transit systems, the prediction of the remaining time to get on/off a vehicle, and to construct a real time public transit schedule. Trans-Sense has been evaluated using real data collected for over 800 hours, on a daily basis, by different Android phones, and using different light rail transit lines at different time spans. The results show that Trans-Sense can achieve an average recall and precision of 95.35% and 90.1%, respectively, in discriminating lightrail stations. Moreover, the empirical distributions governing the different time delays affecting a passenger's total trip time enable predicting the right time of arrival of a passenger to her destination with an accuracy of 91.81%.In addition, the system estimates the stations dimensions with an accuracy of 95.71%.

Dong Ma, Guohao Lan, Mahbub Hassan et al.

We design a system, SolarGest, which can recognize hand gestures near a solar-powered device by analyzing the patterns of the photocurrent. SolarGest is based on the observation that each gesture interferes with incident light rays on the solar panel in a unique way, leaving its distinguishable signature in harvested photocurrent. Using solar energy harvesting laws, we develop a model to optimize design and usage of SolarGest. To further improve the robustness of SolarGest under non-deterministic operating conditions, we combine dynamic time warping with Z-score transformation in a signal processing pipeline to pre-process each gesture waveform before it is analyzed for classification. We evaluate SolarGest with both conventional opaque solar cells as well as emerging see-through transparent cells. Our experiments with 6,960 gesture samples for 6 different gestures reveal that even with transparent cells, SolarGest can detect 96% of the gestures while consuming 44% less power compared to light sensor based systems.

Heba Abdelnasser, Moustafa Youssef, Khaled A. Harras

One of the main methods for interacting with mobile devices today is the error-prone and inflexible touch-screen keyboard. This paper proposes MagBoard: a homomorphic ubiquitous keyboard for mobile devices. MagBoard allows application developers and users to design and print different custom keyboards for the same applications to fit different user's needs. The core idea is to leverage the triaxial magnetometer embedded in standard mobile phones to accurately localize the location of a magnet on a virtual grid superimposed on the printed keyboard. This is achieved through a once in a lifetime fingerprint. MagBoard also provides a number of modules that allow it to cope with background magnetic noise, heterogeneous devices, different magnet shapes, sizes, and strengths, as well as changes in magnet polarity. Our implementation of MagBoard on Android phones with extensive evaluation in different scenarios demonstrates that it can achieve a key detection accuracy of more than 91% for keys as small as 2cm*2cm, reaching 100% for 4cm*4cm keys. This accuracy is robust with different phones and magnets, highlighting MagBoard promise as a homomorphic ubiquitous keyboard for mobile devices.

Heba Abdelnasser, Moustafa Youssef, Khaled A. Harras

We present WiGest: a system that leverages changes in WiFi signal strength to sense in-air hand gestures around the user's mobile device. Compared to related work, WiGest is unique in using standard WiFi equipment, with no modi-fications, and no training for gesture recognition. The system identifies different signal change primitives, from which we construct mutually independent gesture families. These families can be mapped to distinguishable application actions. We address various challenges including cleaning the noisy signals, gesture type and attributes detection, reducing false positives due to interfering humans, and adapting to changing signal polarity. We implement a proof-of-concept prototype using off-the-shelf laptops and extensively evaluate the system in both an office environment and a typical apartment with standard WiFi access points. Our results show that WiGest detects the basic primitives with an accuracy of 87.5% using a single AP only, including through-the-wall non-line-of-sight scenarios. This accuracy in-creases to 96% using three overheard APs. In addition, when evaluating the system using a multi-media player application, we achieve a classification accuracy of 96%. This accuracy is robust to the presence of other interfering humans, highlighting WiGest's ability to enable future ubiquitous hands-free gesture-based interaction with mobile devices.

Nesma Mohssen, Rana Momtaz, Heba Aly et al.

Ubiquity of Internet-connected and sensor-equipped portable devices sparked a new set of mobile computing applications that leverage the proliferating sensing capabilities of smart-phones. For many of these applications, accurate estimation of the user heading, as compared to the phone heading, is of paramount importance. This is of special importance for many crowd-sensing applications, where the phone can be carried in arbitrary positions and orientations relative to the user body. Current state-of-the-art focus mainly on estimating the phone orientation, require the phone to be placed in a particular position, require user intervention, and/or do not work accurately indoors; which limits their ubiquitous usability in different applications. In this paper we present Humaine, a novel system to reliably and accurately estimate the user orientation relative to the Earth coordinate system. Humaine requires no prior-configuration nor user intervention and works accurately indoors and outdoors for arbitrary cell phone positions and orientations relative to the user body. The system applies statistical analysis techniques to the inertial sensors widely available on today's cell phones to estimate both the phone and user orientation. Implementation of the system on different Android devices with 170 experiments performed at different indoor and outdoor testbeds shows that Humaine significantly outperforms the state-of-the-art in diverse scenarios, achieving a median accuracy of $15^\circ$ averaged over a wide variety of phone positions. This is $558\%$ better than the-state-of-the-art. The accuracy is bounded by the error in the inertial sensors readings and can be enhanced with more accurate sensors and sensor fusion.

Ibrahim Sabek, Moustafa Youssef

Device-free (DF) localization is an emerging technology that allows the detection and tracking of entities that do not carry any devices nor participate actively in the localization process. Typically, DF systems require a large number of transmitters and receivers to achieve acceptable accuracy, which is not available in many scenarios such as homes and small businesses. In this paper, we introduce MonoStream as an accurate single-stream DF localization system that leverages the rich Channel State Information (CSI) as well as MIMO information from the physical layer to provide accurate DF localization with only one stream. To boost its accuracy and attain low computational requirements, MonoStream models the DF localization problem as an object recognition problem and uses a novel set of CSI-context features and techniques with proven accuracy and efficiency. Experimental evaluation in two typical testbeds, with a side-by-side comparison with the state-of-the-art, shows that MonoStream can achieve an accuracy of 0.95m with at least 26% enhancement in median distance error using a single stream only. This enhancement in accuracy comes with an efficient execution of less than 23ms per location update on a typical laptop. This highlights the potential of MonoStream usage for real-time DF tracking applications.

Marian George, Moustafa Youssef

Teaching is one of the most important factors affecting any education system. Many research efforts have been conducted to facilitate the presentation modes used by instructors in classrooms as well as provide means for students to review lectures through web browsers. Other studies have been made to provide acoustical design recommendations for classrooms like room size and reverberation times. However, using acoustical features of classrooms as a way to provide education systems with feedback about the learning process was not thoroughly investigated in any of these studies. We propose a system that extracts different sound features of students and instructors, and then uses machine learning techniques to evaluate the acoustical quality of any learning environment. We infer conclusions about the students' satisfaction with the quality of lectures. Using classifiers instead of surveys and other subjective ways of measures can facilitate and speed such experiments which enables us to perform them continuously. We believe our system enables education systems to continuously review and improve their teaching strategies and acoustical quality of classrooms.