Mohit Sewak

Dong-Ho Lee, Jay Pujara, Mohit Sewak et al.

Although large language models (LLMs) have advanced the state-of-the-art in NLP significantly, deploying them for downstream applications is still challenging due to cost, responsiveness, control, or concerns around privacy and security. As such, trainable models are still the preferred option in some cases. However, these models still require human-labeled data for optimal performance, which is expensive and time-consuming to obtain. In order to address this issue, several techniques to reduce human effort involve labeling or generating data using LLMs. Although these methods are effective for certain applications, in practice they encounter difficulties in real-world scenarios. Labeling data requires careful data selection, while generating data necessitates task-specific prompt engineering. In this paper, we propose a unified data creation pipeline that requires only a single formatting example, and which is applicable to a broad range of tasks, including traditionally problematic ones with semantically devoid label spaces. In our experiments we demonstrate that instruction-following LLMs are highly cost-effective data creators, and that models trained with these data exhibit performance better than those trained with human-labeled data (by up to 17.5%) on out-of-distribution evaluation, while maintaining comparable performance on in-distribution tasks. These results have important implications for the robustness of NLP systems deployed in the real-world.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

The cybersecurity threat landscape has lately become overly complex. Threat actors leverage weaknesses in the network and endpoint security in a very coordinated manner to perpetuate sophisticated attacks that could bring down the entire network and many critical hosts in the network. Increasingly advanced deep and machine learning-based solutions have been used in threat detection and protection. The application of these techniques has been reviewed well in the scientific literature. Deep Reinforcement Learning has shown great promise in developing AI-based solutions for areas that had earlier required advanced human cognizance. Different techniques and algorithms under deep reinforcement learning have shown great promise in applications ranging from games to industrial processes, where it is claimed to augment systems with general AI capabilities. These algorithms have recently also been used in cybersecurity, especially in threat detection and endpoint protection, where these are showing state-of-the-art results. Unlike supervised machines and deep learning, deep reinforcement learning is used in more diverse ways and is empowering many innovative applications in the threat defense landscape. However, there does not exist any comprehensive review of these unique applications and accomplishments. Therefore, in this paper, we intend to fill this gap and provide a comprehensive review of the different applications of deep reinforcement learning in cybersecurity threat detection and protection.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

Supervised Deep Learning requires plenty of labeled data to converge, and hence perform optimally for task-specific learning. Therefore, we propose a novel mechanism named DRo (for Deep Routing) for data-scarce domains like security. The DRo approach builds upon some of the recent developments in Deep-Clustering. In particular, it exploits the self-augmented training mechanism using synthetically generated local perturbations. DRo not only allays the challenges with sparse-labeled data but also offers many unique advantages. We also developed a system named DRoID that uses the DRo mechanism for enhancing the performance of an existing Malware Detection System that uses (low information features like the) Android implicit Intent(s) as the only features. We conduct experiments on DRoID using a popular and standardized Android malware dataset and found that the DRo mechanism could successfully reduce the false-alarms generated by the downstream classifier by 67.9%, and also simultaneously boosts its accuracy by 11.3%. This is significant not only because the gains achieved are unparalleled but also because the features used were never considered rich enough to train a classifier on; and hence no decent performance could ever be reported by any malware classification system till-date using these features in isolation. Owing to the results achieved, the DRo mechanism claims a dominant position amongst all known systems that aims to enhance the classification performance of deep learning models with sparse-labeled data.

Hemant Rathore, Sanjay K. Sahay, Ritvik Rajvanshi et al.

Since Google unveiled Android OS for smartphones, malware are thriving with 3Vs, i.e. volume, velocity, and variety. A recent report indicates that one out of every five business/industry mobile application leaks sensitive personal data. Traditional signature/heuristic-based malware detection systems are unable to cope up with current malware challenges and thus threaten the Android ecosystem. Therefore recently researchers have started exploring machine learning and deep learning based malware detection systems. In this paper, we performed a comprehensive feature analysis to identify the significant Android permissions and propose an efficient Android malware detection system using machine learning and deep neural network. We constructed a set of $16$ permissions ($8\%$ of the total set) derived from variance threshold, auto-encoders, and principal component analysis to build a malware detection engine that consumes less train and test time without significant compromise on the model accuracy. Our experimental results show that the Android malware detection model based on the random forest classifier is most balanced and achieves the highest area under curve score of $97.7\%$, which is better than the current state-of-art systems. We also observed that deep neural networks attain comparable accuracy to the baseline results but with a massive computational penalty.

Hemant Rathore, Sanjay K. Sahay, Shivin Thukral et al.

Today anti-malware community is facing challenges due to the ever-increasing sophistication and volume of malware attacks developed by adversaries. Traditional malware detection mechanisms are not able to cope-up with next-generation malware attacks. Therefore in this paper, we propose effective and efficient Android malware detection models based on machine learning and deep learning integrated with clustering. We performed a comprehensive study of different feature reduction, classification and clustering algorithms over various performance metrics to construct the Android malware detection models. Our experimental results show that malware detection models developed using Random Forest eclipsed deep neural network and other classifiers on the majority of performance metrics. The baseline Random Forest model without any feature reduction achieved the highest AUC of 99.4%. Also, the segregating of vector space using clustering integrated with Random Forest further boosted the AUC to 99.6% in one cluster and direct detection of Android malware in another cluster, thus reducing the curse of dimensionality. Additionally, we found that feature reduction in detection models does improve the model efficiency (training and testing time) many folds without much penalty on the effectiveness of the detection model.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

In this paper, we propose a novel mechanism to normalize metamorphic and obfuscated malware down at the opcode level and hence create an advanced metamorphic malware de-obfuscation and defense system. We name this system DRLDO, for Deep Reinforcement Learning based De-Obfuscator. With the inclusion of the DRLDO as a sub-component, an existing Intrusion Detection System could be augmented with defensive capabilities against 'zero-day' attacks from obfuscated and metamorphic variants of existing malware. This gains importance, not only because there exists no system to date that uses advanced DRL to intelligently and automatically normalize obfuscation down even to the opcode level, but also because the DRLDO system does not mandate any changes to the existing IDS. The DRLDO system does not even mandate the IDS' classifier to be retrained with any new dataset containing obfuscated samples. Hence DRLDO could be easily retrofitted into any existing IDS deployment. We designed, developed, and conducted experiments on the system to evaluate the same against multiple-simultaneous attacks from obfuscations generated from malware samples from a standardized dataset that contains multiple generations of malware. Experimental results prove that DRLDO was able to successfully make the otherwise un-detectable obfuscated variants of the malware detectable by an existing pre-trained malware classifier. The detection probability was raised well above the cut-off mark to 0.6 for the classifier to detect the obfuscated malware unambiguously. Further, the de-obfuscated variants generated by DRLDO achieved a very high correlation (of 0.99) with the base malware. This observation validates that the DRLDO system is actually learning to de-obfuscate and not exploiting a trivial trick.

Hemant Rathore, Sanjay K. Sahay, Piyush Nikam et al.

The current state-of-the-art Android malware detection systems are based on machine learning and deep learning models. Despite having superior performance, these models are susceptible to adversarial attacks. Therefore in this paper, we developed eight Android malware detection models based on machine learning and deep neural network and investigated their robustness against adversarial attacks. For this purpose, we created new variants of malware using Reinforcement Learning, which will be misclassified as benign by the existing Android malware detection models. We propose two novel attack strategies, namely single policy attack and multiple policy attack using reinforcement learning for white-box and grey-box scenario respectively. Putting ourselves in the adversary's shoes, we designed adversarial attacks on the detection models with the goal of maximizing fooling rate, while making minimum modifications to the Android application and ensuring that the app's functionality and behavior do not change. We achieved an average fooling rate of 44.21% and 53.20% across all the eight detection models with a maximum of five modifications using a single policy attack and multiple policy attack, respectively. The highest fooling rate of 86.09% with five changes was attained against the decision tree-based model using the multiple policy approach. Finally, we propose an adversarial defense strategy that reduces the average fooling rate by threefold to 15.22% against a single policy attack, thereby increasing the robustness of the detection models i.e. the proposed model can effectively detect variants (metamorphic) of malware. The experimental analysis shows that our proposed Android malware detection system using reinforcement learning is more robust against adversarial attacks.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

Recurrent deep learning language models like the LSTM are often used to provide advanced cyber-defense for high-value assets. The underlying assumption for using LSTM networks for malware-detection is that the op-code sequence of malware could be treated as a (spoken) language representation. There are differences between any spoken-language (sequence of words/sentences) and the machine-language (sequence of op-codes). In this paper, we demonstrate that due to these inherent differences, an LSTM model with its default configuration as tuned for a spoken-language, may not work well to detect malware (using its op-code sequence) unless the network's essential hyper-parameters are tuned appropriately. In the process, we also determine the relative importance of all the different hyper-parameters of an LSTM network as applied to malware detection using their op-code sequence representations. We experimented with different configurations of LSTM networks, and altered hyper-parameters like the embedding-size, number of hidden layers, number of LSTM-units in a hidden layer, pruning/padding-length of the input-vector, activation-function, and batch-size. We discovered that owing to the enhanced complexity of the malware/machine-language, the performance of an LSTM network configured for an Intrusion Detection System, is very sensitive towards the number-of-hidden-layers, input sequence-length, and the choice of the activation-function. Also, for (spoken) language-modeling, the recurrent architectures by-far outperform their non-recurrent counterparts. Therefore, we also assess how sequential DL architectures like the LSTM compare against their non-sequential counterparts like the MLP-DNN for the purpose of malware-detection.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

The Intent in Android plays an important role in inter-process and intra-process communications. The implicit Intent that an application could accept are declared in its manifest and are amongst the easiest feature to extract from an apk. Implicit Intents could even be extracted online and in real-time. So far neither the feasibility of developing an Intrusion Detection System solely on implicit Intent has been explored, nor are any benchmarks available of a malware classifier that is based on implicit Intent alone. We demonstrate that despite Intent is implicit and well declared, it can provide very intuitive insights to distinguish malicious from non-malicious applications. We conducted exhaustive experiments with over 40 different end-to-end Deep Learning configurations of Auto-Encoders and Multi-Layer-Perceptron to create a benchmark for a malware classifier that works exclusively on implicit Intent. Using the results from the experiments we create an intrusion detection system using only the implicit Intents and end-to-end Deep Learning architecture. We obtained an area-under-curve statistic of 0.81, and accuracy of 77.2% along with false-positive-rate of 0.11 on Drebin dataset.

Hemant Rathore, Sanjay K. Sahay, Palash Chaturvedi et al.

Android malware have been growing at an exponential pace and becomes a serious threat to mobile users. It appears that most of the anti-malware still relies on the signature-based detection system which is generally slow and often not able to detect advanced obfuscated malware. Hence time-to-time various authors have proposed different machine learning solutions to identify sophisticated malware. However, it appears that detection accuracy can be improved by using the clustering method. Therefore in this paper, we propose a novel scalable and effective clustering method to improve the detection accuracy of the malicious android application and obtained a better overall accuracy (98.34%) by random forest classifier compared to regular method, i.e., taking the data altogether to detect the malware. However, as far as true positive and true negative are concerned, by clustering method, true positive is best obtained by decision tree (97.59%) and true negative by support vector machine (99.96%) which is the almost same result obtained by the random forest true positive (97.30%) and true negative (99.38%) respectively. The reason that overall accuracy of random forest is high because the true positive of support vector machine and true negative of the decision tree is significantly less than the random forest.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

Recently, Deep Learning has been showing promising results in various Artificial Intelligence applications like image recognition, natural language processing, language modeling, neural machine translation, etc. Although, in general, it is computationally more expensive as compared to classical machine learning techniques, their results are found to be more effective in some cases. Therefore, in this paper, we investigated and compared one of the Deep Learning Architecture called Deep Neural Network (DNN) with the classical Random Forest (RF) machine learning algorithm for the malware classification. We studied the performance of the classical RF and DNN with 2, 4 & 7 layers architectures with the four different feature sets, and found that irrespective of the features inputs, the classical RF accuracy outperforms the DNN.

Mohit Sewak, Sanjay K. Sahay, Hemant Rathore

We investigate a Deep Learning based system for malware detection. In the investigation, we experiment with different combination of Deep Learning architectures including Auto-Encoders, and Deep Neural Networks with varying layers over Malicia malware dataset on which earlier studies have obtained an accuracy of (98%) with an acceptable False Positive Rates (1.07%). But these results were done using extensive man-made custom domain features and investing corresponding feature engineering and design efforts. In our proposed approach, besides improving the previous best results (99.21% accuracy and a False Positive Rate of 0.19%) indicates that Deep Learning based systems could deliver an effective defense against malware. Since it is good in automatically extracting higher conceptual features from the data, Deep Learning based systems could provide an effective, general and scalable mechanism for detection of existing and unknown malware.