Enneng Yang

Yizhou Dang, Enneng Yang, Guibing Guo et al.

Sequential recommendation is an important task to predict the next-item to access based on a sequence of interacted items. Most existing works learn user preference as the transition pattern from the previous item to the next one, ignoring the time interval between these two items. However, we observe that the time interval in a sequence may vary significantly different, and thus result in the ineffectiveness of user modeling due to the issue of \emph{preference drift}. In fact, we conducted an empirical study to validate this observation, and found that a sequence with uniformly distributed time interval (denoted as uniform sequence) is more beneficial for performance improvement than that with greatly varying time interval. Therefore, we propose to augment sequence data from the perspective of time interval, which is not studied in the literature. Specifically, we design five operators (Ti-Crop, Ti-Reorder, Ti-Mask, Ti-Substitute, Ti-Insert) to transform the original non-uniform sequence to uniform sequence with the consideration of variance of time intervals. Then, we devise a control strategy to execute data augmentation on item sequences in different lengths. Finally, we implement these improvements on a state-of-the-art model CoSeRec and validate our approach on four real datasets. The experimental results show that our approach reaches significantly better performance than the other 11 competing methods. Our implementation is available: https://github.com/KingGugu/TiCoSeRec.

Zhenyi Wang, Enneng Yang, Li Shen et al.

Forgetting refers to the loss or deterioration of previously acquired knowledge. While existing surveys on forgetting have primarily focused on continual learning, forgetting is a prevalent phenomenon observed in various other research domains within deep learning. Forgetting manifests in research fields such as generative models due to generator shifts, and federated learning due to heterogeneous data distributions across clients. Addressing forgetting encompasses several challenges, including balancing the retention of old task knowledge with fast learning of new task, managing task interference with conflicting goals, and preventing privacy leakage, etc. Moreover, most existing surveys on continual learning implicitly assume that forgetting is always harmful. In contrast, our survey argues that forgetting is a double-edged sword and can be beneficial and desirable in certain cases, such as privacy-preserving scenarios. By exploring forgetting in a broader context, we present a more nuanced understanding of this phenomenon and highlight its potential advantages. Through this comprehensive survey, we aspire to uncover potential solutions by drawing upon ideas and approaches from various fields that have dealt with forgetting. By examining forgetting beyond its conventional boundaries, we hope to encourage the development of novel strategies for mitigating, harnessing, or even embracing forgetting in real applications. A comprehensive list of papers about forgetting in various research fields is available at \url{https://github.com/EnnengYang/Awesome-Forgetting-in-Deep-Learning}.

Enneng Yang, Junwei Pan, Ximei Wang et al. · tencent-ai

Multi-task learning (MTL) models have demonstrated impressive results in computer vision, natural language processing, and recommender systems. Even though many approaches have been proposed, how well these approaches balance different tasks on each parameter still remains unclear. In this paper, we propose to measure the task dominance degree of a parameter by the total updates of each task on this parameter. Specifically, we compute the total updates by the exponentially decaying Average of the squared Updates (AU) on a parameter from the corresponding task.Based on this novel metric, we observe that many parameters in existing MTL methods, especially those in the higher shared layers, are still dominated by one or several tasks. The dominance of AU is mainly due to the dominance of accumulative gradients from one or several tasks. Motivated by this, we propose a Task-wise Adaptive learning rate approach, AdaTask in short, to separate the \emph{accumulative gradients} and hence the learning rate of each task for each parameter in adaptive learning rate approaches (e.g., AdaGrad, RMSProp, and Adam). Comprehensive experiments on computer vision and recommender system MTL datasets demonstrate that AdaTask significantly improves the performance of dominated tasks, resulting SOTA average task-wise performance. Analysis on both synthetic and real-world datasets shows AdaTask balance parameters in every shared layer well.

Enneng Yang, Zhenyi Wang, Li Shen et al.

Multi-task learning (MTL) aims to empower a model to tackle multiple tasks simultaneously. A recent development known as task arithmetic has revealed that several models, each fine-tuned for distinct tasks, can be directly merged into a single model to execute MTL without necessitating a retraining process using the initial training data. Nevertheless, this direct addition of models often leads to a significant deterioration in the overall performance of the merged model. This decline occurs due to potential conflicts and intricate correlations among the multiple tasks. Consequently, the challenge emerges of how to merge pre-trained models more effectively without using their original training data. This paper introduces an innovative technique called Adaptive Model Merging (AdaMerging). This approach aims to autonomously learn the coefficients for model merging, either in a task-wise or layer-wise manner, without relying on the original training data. Specifically, our AdaMerging method operates as an automatic, unsupervised task arithmetic scheme. It leverages entropy minimization on unlabeled test samples from the multi-task setup as a surrogate objective function to iteratively refine the merging coefficients of the multiple models. Our experimental findings across eight tasks demonstrate the efficacy of the AdaMerging scheme we put forth. Compared to the current state-of-the-art task arithmetic merging scheme, AdaMerging showcases a remarkable 11\% improvement in performance. Notably, AdaMerging also exhibits superior generalization capabilities when applied to unseen downstream tasks. Furthermore, it displays a significantly enhanced robustness to data distribution shifts that may occur during the testing phase.

Yuting Liu, Enneng Yang, Yizhou Dang et al.

Multimodal recommendation aims to model user and item representations comprehensively with the involvement of multimedia content for effective recommendations. Existing research has shown that it is beneficial for recommendation performance to combine (user- and item-) ID embeddings with multimodal salient features, indicating the value of IDs. However, there is a lack of a thorough analysis of the ID embeddings in terms of feature semantics in the literature. In this paper, we revisit the value of ID embeddings for multimodal recommendation and conduct a thorough study regarding its semantics, which we recognize as subtle features of \emph{content} and \emph{structure}. Based on our findings, we propose a novel recommendation model by incorporating ID embeddings to enhance the salient features of both content and structure. Specifically, we put forward a hierarchical attention mechanism to incorporate ID embeddings in modality fusing, coupled with contrastive learning, to enhance content representations. Meanwhile, we propose a lightweight graph convolution network for each modality to amalgamate neighborhood and ID embeddings for improving structural representations. Finally, the content and structure representations are combined to form the ultimate item embedding for recommendation. Extensive experiments on three real-world datasets (Baby, Sports, and Clothing) demonstrate the superiority of our method over state-of-the-art multimodal recommendation methods and the effectiveness of fine-grained ID embeddings. Our code is available at https://anonymous.4open.science/r/IDSF-code/.

Enneng Yang, Zhenyi Wang, Li Shen et al.

Continual learning (CL) aims to learn new tasks without forgetting previous tasks. However, existing CL methods require a large amount of raw data, which is often unavailable due to copyright considerations and privacy risks. Instead, stakeholders usually release pre-trained machine learning models as a service (MLaaS), which users can access via APIs. This paper considers two practical-yet-novel CL settings: data-efficient CL (DECL-APIs) and data-free CL (DFCL-APIs), which achieve CL from a stream of APIs with partial or no raw data. Performing CL under these two new settings faces several challenges: unavailable full raw data, unknown model parameters, heterogeneous models of arbitrary architecture and scale, and catastrophic forgetting of previous APIs. To overcome these issues, we propose a novel data-free cooperative continual distillation learning framework that distills knowledge from a stream of APIs into a CL model by generating pseudo data, just by querying APIs. Specifically, our framework includes two cooperative generators and one CL model, forming their training as an adversarial game. We first use the CL model and the current API as fixed discriminators to train generators via a derivative-free method. Generators adversarially generate hard and diverse synthetic data to maximize the response gap between the CL model and the API. Next, we train the CL model by minimizing the gap between the responses of the CL model and the black-box API on synthetic data, to transfer the API's knowledge to the CL model. Furthermore, we propose a new regularization term based on network similarity to prevent catastrophic forgetting of previous APIs.Our method performs comparably to classic CL with full raw data on the MNIST and SVHN in the DFCL-APIs setting. In the DECL-APIs setting, our method achieves 0.97x, 0.75x and 0.69x performance of classic CL on CIFAR10, CIFAR100, and MiniImageNet.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

Graph Neural Networks (GNNs)-based recommendation algorithms typically assume that training and testing data are drawn from independent and identically distributed (IID) spaces. However, this assumption often fails in the presence of out-of-distribution (OOD) data, resulting in significant performance degradation. In this study, we construct a Structural Causal Model (SCM) to analyze interaction data, revealing that environmental confounders (e.g., the COVID-19 pandemic) lead to unstable correlations in GNN-based models, thus impairing their generalization to OOD data. To address this issue, we propose a novel approach, graph representation learning via causal diffusion (CausalDiffRec) for OOD recommendation. This method enhances the model's generalization on OOD data by eliminating environmental confounding factors and learning invariant graph representations. Specifically, we use backdoor adjustment and variational inference to infer the real environmental distribution, thereby eliminating the impact of environmental confounders. This inferred distribution is then used as prior knowledge to guide the representation learning in the reverse phase of the diffusion process to learn the invariant representation. In addition, we provide a theoretical derivation that proves optimizing the objective function of CausalDiffRec can encourage the model to learn environment-invariant graph representations, thereby achieving excellent generalization performance in recommendations under distribution shifts. Our extensive experiments validate the effectiveness of CausalDiffRec in improving the generalization of OOD data, and the average improvement is up to 10.69% on Food, 18.83% on KuaiRec, 22.41% on Yelp2018, and 11.65% on Douban datasets.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

Graph Contrastive Learning (GCL) leverages data augmentation techniques to produce contrasting views, enhancing the accuracy of recommendation systems through learning the consistency between contrastive views. However, existing augmentation methods, such as directly perturbing interaction graph (e.g., node/edge dropout), may interfere with the original connections and generate poor contrasting views, resulting in sub-optimal performance. In this paper, we define the views that share only a small amount of information with the original graph due to poor data augmentation as noisy views (i.e., the last 20% of the views with a cosine similarity value less than 0.1 to the original view). We demonstrate through detailed experiments that noisy views will significantly degrade recommendation performance. Further, we propose a model-agnostic Symmetric Graph Contrastive Learning (SGCL) method with theoretical guarantees to address this issue. Specifically, we introduce symmetry theory into graph contrastive learning, based on which we propose a symmetric form and contrast loss resistant to noisy interference. We provide theoretical proof that our proposed SGCL method has a high tolerance to noisy views. Further demonstration is given by conducting extensive experiments on three real-world datasets. The experimental results demonstrate that our approach substantially increases recommendation accuracy, with relative improvements reaching as high as 12.25% over nine other competing models. These results highlight the efficacy of our method.

Tianjun Wei, Enneng Yang, Yingpeng Du et al.

Model merging (MM) offers an efficient mechanism for integrating multiple specialized models without access to original training data or costly retraining. While MM has demonstrated success in domains like computer vision, its role in recommender systems (RSs) remains largely unexplored. Recently, Generative Recommendation (GR) has emerged as a new paradigm in RSs, characterized by rapidly growing model scales and substantial computational costs, making MM particularly appealing for cost-sensitive deployment scenarios. In this work, we present the first systematic study of MM in GR through a contextual lens. We focus on a fundamental yet underexplored challenge in real-world: how to merge generative recommenders specialized to different real-world contexts, arising from temporal evolving user behaviors and heterogeneous application domains. To this end, we propose a unified framework MMGRid, a structured contextual grid of GR checkpoints that organizes models trained under diverse contexts induced by temporal evolution and domain diversity. All checkpoints are derived from a shared base LLM but fine-tuned on context-specific data, forming a realistic and controlled model space for systematically analyzing MM across GR paradigms and merging algorithms. Our investigation reveals several key insights. First, training GR models from LLMs can introduce parameter conflicts during merging due to token distribution shifts and objective disparities; such conflicts can be alleviated by disentangling task-aware and context-specific parameter changes via base model replacement. Second, incremental training across contexts induces recency bias, which can be effectively balanced through weighted contextual merging. Notably, we observe that optimal merging weights correlate with context-dependent interaction characteristics, offering practical guidance for weight selection in real-world deployments.

Chu Zhao, Enneng Yang, Yuting Liu et al.

Test-time reinforcement learning generates multiple candidate answers via repeated rollouts and performs online updates using pseudo-labels constructed by majority voting. To reduce overhead and improve exploration, prior work introduces tree structured rollouts, which share reasoning prefixes and branch at key nodes to improve sampling efficiency. However, this paradigm still faces two challenges: (1) high entropy branching can trigger rollout collapse, where the branching budget concentrates on a few trajectories with consecutive high-entropy segments, rapidly reducing the number of effective branches; (2) early pseudo-labels are noisy and biased, which can induce self-reinforcing overfitting, causing the policy to sharpen prematurely and suppress exploration. To address these issues, we propose Entropy Confidence Hybrid Group Relative Policy Optimization (ECHO). During rollout, ECHO jointly leverages local entropy and group level confidence to adaptively control branch width, and further introduces online confidence-based pruning to terminate persistently low confidence branches, avoiding high entropy traps and mitigating collapse. During policy updates, ECHO employs confidence adaptive clipping and an entropy confidence hybrid advantage shaping approach to enhance training robustness and mitigate early stage bias. Experiments demonstrate that ECHO achieves consistent gains on multiple mathematical and visual reasoning benchmarks, and generalizes more effectively under a limited rollout budget.

Enneng Yang, Li Shen, Zhenyi Wang et al.

Model merging-based multitask learning (MTL) offers a promising approach for performing MTL by merging multiple expert models without requiring access to raw training data. However, in this paper, we examine the merged model's representation distribution and uncover a critical issue of "representation bias". This bias arises from a significant distribution gap between the representations of the merged and expert models, leading to the suboptimal performance of the merged MTL model. To address this challenge, we first propose a representation surgery solution called Surgery. Surgery is a lightweight, task-specific module that aligns the final layer representations of the merged model with those of the expert models, effectively alleviating bias and improving the merged model's performance. Despite these improvements, a performance gap remains compared to the traditional MTL method. Further analysis reveals that representation bias phenomena exist at each layer of the merged model, and aligning representations only in the last layer is insufficient for fully reducing systemic bias because biases introduced at each layer can accumulate and interact in complex ways. To tackle this, we then propose a more comprehensive solution, deep representation surgery (also called SurgeryV2), which mitigates representation bias across all layers, and thus bridges the performance gap between model merging-based MTL and traditional MTL. Finally, we design an unsupervised optimization objective to optimize both the Surgery and SurgeryV2 modules. Our experimental results show that incorporating these modules into state-of-the-art (SOTA) model merging schemes leads to significant performance gains. Notably, our SurgeryV2 scheme reaches almost the same level as individual expert models or the traditional MTL model. The code is available at \url{https://github.com/EnnengYang/SurgeryV2}.

Chu Zhao, Enneng Yang, Jianzhe Zhao et al.

Direct Preference Optimization (DPO) guides large language models (LLMs) to generate recommendations aligned with user historical behavior distributions by minimizing preference alignment loss. However, our systematic empirical research and theoretical analysis reveal that DPO tends to amplify spurious correlations caused by environmental confounders during the alignment process, significantly undermining the generalization capability of LLM-based generative recommendation methods in out of distribution (OOD) scenarios. To mitigate this issue, we propose CausalDPO, an extension of DPO that incorporates a causal invariance learning mechanism. This method introduces a backdoor adjustment strategy during the preference alignment phase to eliminate interference from environmental confounders, explicitly models the latent environmental distribution using a soft clustering approach, and enhances robust consistency across diverse environments through invariance constraints. Theoretical analysis demonstrates that CausalDPO can effectively capture users stable preference structures across multiple environments, thereby improving the OOD generalization performance of LLM-based recommendation models. We conduct extensive experiments under four representative distribution shift settings to validate the effectiveness of CausalDPO, achieving an average performance improvement of 17.17% across four evaluation metrics.

Enneng Yang, Li Shen, Zhenyi Wang et al.

Multi-task learning (MTL) compresses the information from multiple tasks into a unified backbone to improve computational efficiency and generalization. Recent work directly merges multiple independently trained models to perform MTL instead of collecting their raw data for joint training, greatly expanding the application scenarios of MTL. However, by visualizing the representation distribution of existing model merging schemes, we find that the merged model often suffers from the dilemma of representation bias. That is, there is a significant discrepancy in the representation distribution between the merged and individual models, resulting in poor performance of merged MTL. In this paper, we propose a representation surgery solution called "Surgery" to reduce representation bias in the merged model. Specifically, Surgery is a lightweight task-specific module that takes the representation of the merged model as input and attempts to output the biases contained in the representation from the merged model. We then designed an unsupervised optimization objective that updates the Surgery module by minimizing the distance between the merged model's representation and the individual model's representation. Extensive experiments demonstrate significant MTL performance improvements when our Surgery module is applied to state-of-the-art (SOTA) model merging schemes.

Anke Tang, Enneng Yang, Li Shen et al.

Deep model merging represents an emerging research direction that combines multiple fine-tuned models to harness their specialized capabilities across different tasks and domains. Current model merging techniques focus on merging all available models simultaneously, with weight interpolation-based methods being the predominant approaches. However, these conventional approaches are not well-suited for scenarios where models become available sequentially, and they often suffer from high memory requirements and potential interference between tasks. In this study, we propose a training-free projection-based continual merging method that processes models sequentially through orthogonal projections of weight matrices and adaptive scaling mechanisms. Our method operates by projecting new parameter updates onto subspaces orthogonal to existing merged parameter updates while using an adaptive scaling mechanism to maintain stable parameter distances, enabling efficient sequential integration of task-specific knowledge. Our approach maintains constant memory complexity to the number of models, minimizes interference between tasks through orthogonal projections, and retains the performance of previously merged models through adaptive task vector scaling. Extensive experiments on CLIP-ViT models demonstrate that our method achieves a 5-8% average accuracy improvement while maintaining robust performance in different task orderings.

Li Shen, Anke Tang, Enneng Yang et al.

Multi-task learning (MTL) leverages a shared model to accomplish multiple tasks and facilitate knowledge transfer. Recent research on task arithmetic-based MTL demonstrates that merging the parameters of independently fine-tuned models can effectively achieve MTL. However, existing merging methods primarily seek a static optimal solution within the original model parameter space, which often results in performance degradation due to the inherent diversity among tasks and potential interferences. To address this challenge, in this paper, we propose a Weight-Ensembling Mixture of Experts (WEMoE) method for multi-task model merging. Specifically, we first identify critical (or sensitive) modules by analyzing parameter variations in core modules of Transformer-based models before and after finetuning. Then, our WEMoE statically merges non-critical modules while transforming critical modules into a mixture-of-experts (MoE) structure. During inference, expert modules in the MoE are dynamically merged based on input samples, enabling a more flexible and adaptive merging approach. Building on WEMoE, we further introduce an efficient-and-effective WEMoE (E-WEMoE) method, whose core mechanism involves eliminating non-essential elements in the critical modules of WEMoE and implementing shared routing across multiple MoE modules, thereby significantly reducing both the trainable parameters, the overall parameter count, and computational overhead of the merged model by WEMoE. Experimental results across various architectures and tasks demonstrate that both WEMoE and E-WEMoE outperform state-of-the-art (SOTA) model merging methods in terms of MTL performance, generalization, and robustness.

Chu Zhao, Enneng Yang, Yuliang Liang et al.

The distributionally robust optimization (DRO)-based graph neural network methods improve recommendation systems' out-of-distribution (OOD) generalization by optimizing the model's worst-case performance. However, these studies fail to consider the impact of noisy samples in the training data, which results in diminished generalization capabilities and lower accuracy. Through experimental and theoretical analysis, this paper reveals that current DRO-based graph recommendation methods assign greater weight to noise distribution, leading to model parameter learning being dominated by it. When the model overly focuses on fitting noise samples in the training data, it may learn irrelevant or meaningless features that cannot be generalized to OOD data. To address this challenge, we design a Distributionally Robust Graph model for OOD recommendation (DRGO). Specifically, our method first employs a simple and effective diffusion paradigm to alleviate the noisy effect in the latent space. Additionally, an entropy regularization term is introduced in the DRO objective function to avoid extreme sample weights in the worst-case distribution. Finally, we provide a theoretical proof of the generalization error bound of DRGO as well as a theoretical analysis of how our approach mitigates noisy sample effects, which helps to better understand the proposed framework from a theoretical perspective. We conduct extensive experiments on four datasets to evaluate the effectiveness of our framework against three typical distribution shifts, and the results demonstrate its superiority in both independently and identically distributed distributions (IID) and OOD.

Pengxiang Lan, Enneng Yang, Yuting Liu et al.

Prompt tuning is a promising method to fine-tune a pre-trained language model without retraining its large-scale parameters. Instead, it attaches a soft prompt to the input text, whereby downstream tasks can be well adapted by merely learning the embeddings of prompt tokens. Nevertheless, existing methods still suffer from two challenges: (i) they are hard to balance accuracy and efficiency. A longer (shorter) soft prompt generally leads to a better(worse) accuracy but at the cost of more (less) training time. (ii)The performance may not be consistent when adapting to different downstream tasks. We attribute it to the same embedding space but responsible for different requirements of downstream tasks. To address these issues, we propose an Efficient Prompt Tuning method (EPT) by multi-space projection and prompt fusion. Specifically, it decomposes a given soft prompt into a shorter prompt and two low-rank matrices, significantly reducing the training time. Accuracy is also enhanced by leveraging low-rank matrices and the short prompt as additional knowledge sources to enrich the semantics of the original short prompt. In addition, we project the soft prompt into multiple subspaces to improve the performance consistency, and then adaptively learn the combination weights of different spaces through a gating network. Experiments on 13 natural language processing downstream tasks show that our method significantly and consistently outperforms 11 comparison methods with the relative percentage of improvements up to 12.9%, and training time decreased by 14%.

Pengxiang Lan, Haoyu Xu, Enneng Yang et al.

Prompt tuning (PT) offers a cost-effective alternative to fine-tuning large-scale pre-trained language models (PLMs), requiring only a few parameters in soft prompt tokens added before the input text. However, existing PT approaches face two significant issues: (i) They overlook intrinsic semantic associations between soft prompt tokens, leading to high discreteness and limited interactions, thus reducing the model's comprehension and effectiveness in complex tasks. (ii) Due to the complexity of downstream tasks, long soft prompt is necessitated to improve performance, but prompt length correlates positively with memory usage and computational costs. Achieving high efficiency and performance remains an ongoing challenge. To address these issues, we propose a novel Low-parameters prompt tuning (LAMP) method, which leverages prompt decomposition and compressed outer product. Specifically, the prompt decomposition module employs Truncated SVD to reduce training parameters and significantly lower the dimensionality of the soft prompt parameter space. It then utilizes a compressed outer product module to facilitate multiple interactions among prompt tokens, exploring their intrinsic associations to enhance knowledge representation. Finally, LAMP uses average pooling to reduce memory usage and training/inference time. Extensive experiments across six architectures and eight datasets demonstrate that LAMP outperforms state-of-the-art PT-based and LoRA-based methods in performance and efficiency.

Enneng Yang, Xin Xin, Li Shen et al.

Factorization machine (FM) is an effective model for feature-based recommendation which utilizes inner product to capture second-order feature interactions. However, one of the major drawbacks of FM is that it couldn't capture complex high-order interaction signals. A common solution is to change the interaction function, such as stacking deep neural networks on the top of FM. In this work, we propose an alternative approach to model high-order interaction signals in the embedding level, namely Generalized Embedding Machine (GEM). The embedding used in GEM encodes not only the information from the feature itself but also the information from other correlated features. Under such situation, the embedding becomes high-order. Then we can incorporate GEM with FM and even its advanced variants to perform feature interactions. More specifically, in this paper we utilize graph convolution networks (GCN) to generate high-order embeddings. We integrate GEM with several FM-based models and conduct extensive experiments on two real-world datasets. The results demonstrate significant improvement of GEM over corresponding baselines.