Hao Li

Chunyu Qiang, Hao Li, Hao Ni et al.

Recently, there has been a growing interest in text-to-speech (TTS) methods that can be trained with minimal supervision by combining two types of discrete speech representations and using two sequence-to-sequence tasks to decouple TTS. However, existing methods suffer from three problems: the high dimensionality and waveform distortion of discrete speech representations, the prosodic averaging problem caused by the duration prediction model in non-autoregressive frameworks, and the information redundancy and dimension explosion problems of existing semantic encoding methods. To address these problems, three progressive methods are proposed. First, we propose Diff-LM-Speech, an autoregressive structure consisting of a language model and diffusion models, which models the semantic embedding into the mel-spectrogram based on a diffusion model to achieve higher audio quality. We also introduce a prompt encoder structure based on a variational autoencoder and a prosody bottleneck to improve prompt representation ability. Second, we propose Tetra-Diff-Speech, a non-autoregressive structure consisting of four diffusion model-based modules that design a duration diffusion model to achieve diverse prosodic expressions. Finally, we propose Tri-Diff-Speech, a non-autoregressive structure consisting of three diffusion model-based modules that verify the non-necessity of existing semantic encoding models and achieve the best results. Experimental results show that our proposed methods outperform baseline methods. We provide a website with audio samples.

Chunyu Qiang, Hao Li, Yixin Tian et al.

Text-to-speech (TTS) methods have shown promising results in voice cloning, but they require a large number of labeled text-speech pairs. Minimally-supervised speech synthesis decouples TTS by combining two types of discrete speech representations(semantic \& acoustic) and using two sequence-to-sequence tasks to enable training with minimal supervision. However, existing methods suffer from information redundancy and dimension explosion in semantic representation, and high-frequency waveform distortion in discrete acoustic representation. Autoregressive frameworks exhibit typical instability and uncontrollability issues. And non-autoregressive frameworks suffer from prosodic averaging caused by duration prediction models. To address these issues, we propose a minimally-supervised high-fidelity speech synthesis method, where all modules are constructed based on the diffusion models. The non-autoregressive framework enhances controllability, and the duration diffusion model enables diversified prosodic expression. Contrastive Token-Acoustic Pretraining (CTAP) is used as an intermediate semantic representation to solve the problems of information redundancy and dimension explosion in existing semantic coding methods. Mel-spectrogram is used as the acoustic representation. Both semantic and acoustic representations are predicted by continuous variable regression tasks to solve the problem of high-frequency fine-grained waveform distortion. Experimental results show that our proposed method outperforms the baseline method. We provide audio samples on our website.

Chunyu Qiang, Hao Li, Yixin Tian et al.

For fine-grained generation and recognition tasks such as minimally-supervised text-to-speech (TTS), voice conversion (VC), and automatic speech recognition (ASR), the intermediate representations extracted from speech should serve as a "bridge" between text and acoustic information, containing information from both modalities. The semantic content is emphasized, while the paralinguistic information such as speaker identity and acoustic details should be de-emphasized. However, existing methods for extracting fine-grained intermediate representations from speech suffer from issues of excessive redundancy and dimension explosion. Contrastive learning is a good method for modeling intermediate representations from two modalities. However, existing contrastive learning methods in the audio field focus on extracting global descriptive information for downstream audio classification tasks, making them unsuitable for TTS, VC, and ASR tasks. To address these issues, we propose a method named "Contrastive Token-Acoustic Pretraining (CTAP)", which uses two encoders to bring phoneme and speech into a joint multimodal space, learning how to connect phoneme and speech at the frame level. The CTAP model is trained on 210k speech and phoneme pairs, achieving minimally-supervised TTS, VC, and ASR. The proposed CTAP method offers a promising solution for fine-grained generation and recognition downstream tasks in speech processing. We provide a website with audio samples.

Chenpeng Du, Hao Li, Yizhou Lu et al.

Training a code-switching end-to-end automatic speech recognition (ASR) model normally requires a large amount of data, while code-switching data is often limited. In this paper, three novel approaches are proposed for code-switching data augmentation. Specifically, they are audio splicing with the existing code-switching data, and TTS with new code-switching texts generated by word translation or word insertion. Our experiments on 200 hours Mandarin-English code-switching dataset show that all the three proposed approaches yield significant improvements on code-switching ASR individually. Moreover, all the proposed approaches can be combined with recent popular SpecAugment, and an addition gain can be obtained. WER is significantly reduced by relative 24.0% compared to the system without any data augmentation, and still relative 13.0% gain compared to the system with only SpecAugment

Zhiying Huang, Hao Li, Ming Lei

With the number of smart devices increasing, the demand for on-device text-to-speech (TTS) increases rapidly. In recent years, many prominent End-to-End TTS methods have been proposed, and have greatly improved the quality of synthesized speech. However, to ensure the qualified speech, most TTS systems depend on large and complex neural network models, and it's hard to deploy these TTS systems on-device. In this paper, a small-footprint, fast, stable network for on-device TTS is proposed, named as DeviceTTS. DeviceTTS makes use of a duration predictor as a bridge between encoder and decoder so as to avoid the problem of words skipping and repeating in Tacotron. As we all know, model size is a key factor for on-device TTS. For DeviceTTS, Deep Feedforward Sequential Memory Network (DFSMN) is used as the basic component. Moreover, to speed up inference, mix-resolution decoder is proposed for balance the inference speed and speech quality. Experiences are done with WORLD and LPCNet vocoder. Finally, with only 1.4 million model parameters and 0.099 GFLOPS, DeviceTTS achieves comparable performance with Tacotron and FastSpeech. As far as we know, the DeviceTTS can meet the needs of most of the devices in practical application.

Qi Liu, Zhehuai Chen, Hao Li et al.

End-to-end (E2E) systems have played a more and more important role in automatic speech recognition (ASR) and achieved great performance. However, E2E systems recognize output word sequences directly with the input acoustic feature, which can only be trained on limited acoustic data. The extra text data is widely used to improve the results of traditional artificial neural network-hidden Markov model (ANN-HMM) hybrid systems. The involving of extra text data to standard E2E ASR systems may break the E2E property during decoding. In this paper, a novel modular E2E ASR system is proposed. The modular E2E ASR system consists of two parts: an acoustic-to-phoneme (A2P) model and a phoneme-to-word (P2W) model. The A2P model is trained on acoustic data, while extra data including large scale text data can be used to train the P2W model. This additional data enables the modular E2E ASR system to model not only the acoustic part but also the language part. During the decoding phase, the two models will be integrated and act as a standard acoustic-to-word (A2W) model. In other words, the proposed modular E2E ASR system can be easily trained with extra text data and decoded in the same way as a standard E2E ASR system. Experimental results on the Switchboard corpus show that the modular E2E model achieves better word error rate (WER) than standard A2W models.

Hao Li, Yongguo Kang, Zhenyu Wang

We present EMPHASIS, an emotional phoneme-based acoustic model for speech synthesis system. EMPHASIS includes a phoneme duration prediction model and an acoustic parameter prediction model. It uses a CBHG-based regression network to model the dependencies between linguistic features and acoustic features. We modify the input and output layer structures of the network to improve the performance. For the linguistic features, we apply a feature grouping strategy to enhance emotional and prosodic features. The acoustic parameters are designed to be suitable for the regression task and waveform reconstruction. EMPHASIS can synthesize speech in real-time and generate expressive interrogative and exclamatory speech with high audio quality. EMPHASIS is designed to be a multi-lingual model and can synthesize Mandarin-English speech for now. In the experiment of emotional speech synthesis, it achieves better subjective results than other real-time speech synthesis systems.

Zhehuai Chen, Qi Liu, Hao Li et al.

End-to-end (E2E) automatic speech recognition (ASR) systems directly map acoustics to words using a unified model. Previous works mostly focus on E2E training a single model which integrates acoustic and language model into a whole. Although E2E training benefits from sequence modeling and simplified decoding pipelines, large amount of transcribed acoustic data is usually required, and traditional acoustic and language modelling techniques cannot be utilized. In this paper, a novel modular training framework of E2E ASR is proposed to separately train neural acoustic and language models during training stage, while still performing end-to-end inference in decoding stage. Here, an acoustics-to-phoneme model (A2P) and a phoneme-to-word model (P2W) are trained using acoustic data and text data respectively. A phone synchronous decoding (PSD) module is inserted between A2P and P2W to reduce sequence lengths without precision loss. Finally, modules are integrated into an acousticsto-word model (A2W) and jointly optimized using acoustic data to retain the advantage of sequence modeling. Experiments on a 300- hour Switchboard task show significant improvement over the direct A2W model. The efficiency in both training and decoding also benefits from the proposed method.