Yang Liu

Ying Qiu, Yang Liu, Juan Arteaga-Falconi et al.

With the increase in health consciousness, noninvasive body monitoring has aroused interest among researchers. As one of the most important pieces of physiological information, researchers have remotely estimated the heart rate (HR) from facial videos in recent years. Although progress has been made over the past few years, there are still some limitations, like the processing time increasing with accuracy and the lack of comprehensive and challenging datasets for use and comparison. Recently, it was shown that HR information can be extracted from facial videos by spatial decomposition and temporal filtering. Inspired by this, a new framework is introduced in this paper to remotely estimate the HR under realistic conditions by combining spatial and temporal filtering and a convolutional neural network. Our proposed approach shows better performance compared with the benchmark on the MMSE-HR dataset in terms of both the average HR estimation and short-time HR estimation. High consistency in short-time HR estimation is observed between our method and the ground truth.

Zhenyu Bu, Yang Liu, Jiayu Huo et al.

Accurate identification of End-Diastolic (ED) and End-Systolic (ES) frames is key for cardiac function assessment through echocardiography. However, traditional methods face several limitations: they require extensive amounts of data, extensive annotations by medical experts, significant training resources, and often lack robustness. Addressing these challenges, we proposed an unsupervised and training-free method, our novel approach leverages unsupervised segmentation to enhance fault tolerance against segmentation inaccuracies. By identifying anchor points and analyzing directional deformation, we effectively reduce dependence on the accuracy of initial segmentation images and enhance fault tolerance, all while improving robustness. Tested on Echo-dynamic and CAMUS datasets, our method achieves comparable accuracy to learning-based models without their associated drawbacks. The code is available at https://github.com/MRUIL/DDSB

Dimitrios Psychogyios, Emanuele Colleoni, Beatrice Van Amsterdam et al.

Surgical tool segmentation and action recognition are fundamental building blocks in many computer-assisted intervention applications, ranging from surgical skills assessment to decision support systems. Nowadays, learning-based action recognition and segmentation approaches outperform classical methods, relying, however, on large, annotated datasets. Furthermore, action recognition and tool segmentation algorithms are often trained and make predictions in isolation from each other, without exploiting potential cross-task relationships. With the EndoVis 2022 SAR-RARP50 challenge, we release the first multimodal, publicly available, in-vivo, dataset for surgical action recognition and semantic instrumentation segmentation, containing 50 suturing video segments of Robotic Assisted Radical Prostatectomy (RARP). The aim of the challenge is twofold. First, to enable researchers to leverage the scale of the provided dataset and develop robust and highly accurate single-task action recognition and tool segmentation approaches in the surgical domain. Second, to further explore the potential of multitask-based learning approaches and determine their comparative advantage against their single-task counterparts. A total of 12 teams participated in the challenge, contributing 7 action recognition methods, 9 instrument segmentation techniques, and 4 multitask approaches that integrated both action recognition and instrument segmentation. The complete SAR-RARP50 dataset is available at: https://rdr.ucl.ac.uk/projects/SARRARP50_Segmentation_of_surgical_instrumentation_and_Action_Recognition_on_Robot-Assisted_Radical_Prostatectomy_Challenge/191091

Milad Leyli-Abadi, Jérôme Picault, Antoine Marot et al.

This paper addresses the growing computational challenges of power grid simulations, particularly with the increasing integration of renewable energy sources like wind and solar. As grid operators must analyze significantly more scenarios in near real-time to prevent failures and ensure stability, traditional physical-based simulations become computationally impractical. To tackle this, a competition was organized to develop AI-driven methods that accelerate power flow simulations by at least an order of magnitude while maintaining operational reliability. This competition utilized a regional-scale grid model with a 30\% renewable energy mix, mirroring the anticipated near-future composition of the French power grid. A key contribution of this work is through the use of LIPS (Learning Industrial Physical Systems), a benchmarking framework that evaluates solutions based on four critical dimensions: machine learning performance, physical compliance, industrial readiness, and generalization to out-of-distribution scenarios. The paper provides a comprehensive overview of the Machine Learning for Physical Simulation (ML4PhySim) competition, detailing the benchmark suite, analyzing top-performing solutions that outperformed traditional simulation methods, and sharing key organizational insights and best practices for running large-scale AI competitions. Given the promising results achieved, the study aims to inspire further research into more efficient, scalable, and sustainable power network simulation methodologies.

Yang Liu, Maxence Boels, Luis C. Garcia-Peraza-Herrera et al.

Online surgical phase recognition plays a significant role towards building contextual tools that could quantify performance and oversee the execution of surgical workflows. Current approaches are limited since they train spatial feature extractors using frame-level supervision that could lead to incorrect predictions due to similar frames appearing at different phases, and poorly fuse local and global features due to computational constraints which can affect the analysis of long videos commonly encountered in surgical interventions. In this paper, we present a two-stage method, called Long Video Transformer (LoViT) for fusing short- and long-term temporal information that combines a temporally-rich spatial feature extractor and a multi-scale temporal aggregator consisting of two cascaded L-Trans modules based on self-attention, followed by a G-Informer module based on ProbSparse self-attention for processing global temporal information. The multi-scale temporal head then combines local and global features and classifies surgical phases using phase transition-aware supervision. Our approach outperforms state-of-the-art methods on the Cholec80 and AutoLaparo datasets consistently. Compared to Trans-SVNet, LoViT achieves a 2.4 pp (percentage point) improvement in video-level accuracy on Cholec80 and a 3.1 pp improvement on AutoLaparo. Moreover, it achieves a 5.3 pp improvement in phase-level Jaccard on AutoLaparo and a 1.55 pp improvement on Cholec80. Our results demonstrate the effectiveness of our approach in achieving state-of-the-art performance of surgical phase recognition on two datasets of different surgical procedures and temporal sequencing characteristics whilst introducing mechanisms that cope with long videos.

Yucheng Fu, Yang Liu

Bubble segmentation and size detection algorithms have been developed in recent years for their high efficiency and accuracy in measuring bubbly two-phase flows. In this work, we proposed an architecture called bubble generative adversarial networks (BubGAN) for the generation of realistic synthetic images which could be further used as training or benchmarking data for the development of advanced image processing algorithms. The BubGAN is trained initially on a labeled bubble dataset consisting of ten thousand images. By learning the distribution of these bubbles, the BubGAN can generate more realistic bubbles compared to the conventional models used in the literature. The trained BubGAN is conditioned on bubble feature parameters and has full control of bubble properties in terms of aspect ratio, rotation angle, circularity and edge ratio. A million bubble dataset is pre-generated using the trained BubGAN. One can then assemble realistic bubbly flow images using this dataset and associated image processing tool. These images contain detailed bubble information, therefore do not require additional manual labeling. This is more useful compared with the conventional GAN which generates images without labeling information. The tool could be used to provide benchmarking and training data for existing image processing algorithms and to guide the future development of bubble detecting algorithms.