Zhiqiang Tang

Yunhe Gao, Xingjian Shi, Yi Zhu et al. · amazon-science

Models should be able to adapt to unseen data during test-time to avoid performance drops caused by inevitable distribution shifts in real-world deployment scenarios. In this work, we tackle the practical yet challenging test-time adaptation (TTA) problem, where a model adapts to the target domain without accessing the source data. We propose a simple recipe called \textit{Data-efficient Prompt Tuning} (DePT) with two key ingredients. First, DePT plugs visual prompts into the vision Transformer and only tunes these source-initialized prompts during adaptation. We find such parameter-efficient finetuning can efficiently adapt the model representation to the target domain without overfitting to the noise in the learning objective. Second, DePT bootstraps the source representation to the target domain by memory bank-based online pseudo-labeling. A hierarchical self-supervised regularization specially designed for prompts is jointly optimized to alleviate error accumulation during self-training. With much fewer tunable parameters, DePT demonstrates not only state-of-the-art performance on major adaptation benchmarks VisDA-C, ImageNet-C, and DomainNet-126, but also superior data efficiency, i.e., adaptation with only 1\% or 10\% data without much performance degradation compared to 100\% data. In addition, DePT is also versatile to be extended to online or multi-source TTA settings.

Jielin Qiu, Yi Zhu, Xingjian Shi et al.

Multimodal image-text models have shown remarkable performance in the past few years. However, evaluating robustness against distribution shifts is crucial before adopting them in real-world applications. In this work, we investigate the robustness of 12 popular open-sourced image-text models under common perturbations on five tasks (image-text retrieval, visual reasoning, visual entailment, image captioning, and text-to-image generation). In particular, we propose several new multimodal robustness benchmarks by applying 17 image perturbation and 16 text perturbation techniques on top of existing datasets. We observe that multimodal models are not robust to image and text perturbations, especially to image perturbations. Among the tested perturbation methods, character-level perturbations constitute the most severe distribution shift for text, and zoom blur is the most severe shift for image data. We also introduce two new robustness metrics (\textbf{MMI} for MultiModal Impact score and \textbf{MOR} for Missing Object Rate) for proper evaluations of multimodal models. We hope our extensive study sheds light on new directions for the development of robust multimodal models. More details can be found on the project webpage: \url{https://MMRobustness.github.io}.

Zichang Liu, Zhiqiang Tang, Xingjian Shi et al.

The ability to jointly learn from multiple modalities, such as text, audio, and visual data, is a defining feature of intelligent systems. While there have been promising advances in designing neural networks to harness multimodal data, the enormous success of data augmentation currently remains limited to single-modality tasks like image classification. Indeed, it is particularly difficult to augment each modality while preserving the overall semantic structure of the data; for example, a caption may no longer be a good description of an image after standard augmentations have been applied, such as translation. Moreover, it is challenging to specify reasonable transformations that are not tailored to a particular modality. In this paper, we introduce LeMDA, Learning Multimodal Data Augmentation, an easy-to-use method that automatically learns to jointly augment multimodal data in feature space, with no constraints on the identities of the modalities or the relationship between modalities. We show that LeMDA can (1) profoundly improve the performance of multimodal deep learning architectures, (2) apply to combinations of modalities that have not been previously considered, and (3) achieve state-of-the-art results on a wide range of applications comprised of image, text, and tabular data.

Zhiqiang Tang, Haoyang Fang, Su Zhou et al.

AutoGluon-Multimodal (AutoMM) is introduced as an open-source AutoML library designed specifically for multimodal learning. Distinguished by its exceptional ease of use, AutoMM enables fine-tuning of foundation models with just three lines of code. Supporting various modalities including image, text, and tabular data, both independently and in combination, the library offers a comprehensive suite of functionalities spanning classification, regression, object detection, semantic matching, and image segmentation. Experiments across diverse datasets and tasks showcases AutoMM's superior performance in basic classification and regression tasks compared to existing AutoML tools, while also demonstrating competitive results in advanced tasks, aligning with specialized toolboxes designed for such purposes.

Yuli Song, Wenbo Li, Wenci Xin et al.

Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments. To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot. However, the compliance of the flexible mechanism introduces instability, rendering it sensitive to external and internal uncertainties. To address these limitations, we propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet. The neural network adopts a hierarchical design that explicitly captures bidirectional spatial coupling between segments while modeling local disturbance along the robot body. A confidence-gating mechanism integrates prior kinematic knowledge, allowing the controller to adaptively balance model-based and learned components for improved convergence and fidelity. The framework is validated on a five-segment planar hyper-redundant robot under three representative shape configurations. Experimental results demonstrate that the proposed method consistently outperforms both analytical and purely neural controllers. In complex scenarios, it reduces steady-state error by up to 75.5% against the analytical model, and accelerates convergence by up to 20.5% compared to the data-driven baseline. Furthermore, gating analysis reveals a state-dependent authority fusion, shifting toward data-driven predictions in unstable states, while relying on physical priors in the remaining cases. Finally, we demonstrate robust performance in a dynamic task where the robot maintains a fixed end-effector position while avoiding moving obstacles, achieving a precise tip-positioning accuracy with a mean error of 10.47 mm.

Zhiqiang Tang, Yunhe Gao, Yi Zhu et al.

Traditional normalization techniques (e.g., Batch Normalization and Instance Normalization) generally and simplistically assume that training and test data follow the same distribution. As distribution shifts are inevitable in real-world applications, well-trained models with previous normalization methods can perform badly in new environments. Can we develop new normalization methods to improve generalization robustness under distribution shifts? In this paper, we answer the question by proposing CrossNorm and SelfNorm. CrossNorm exchanges channel-wise mean and variance between feature maps to enlarge training distribution, while SelfNorm uses attention to recalibrate the statistics to bridge gaps between training and test distributions. CrossNorm and SelfNorm can complement each other, though exploring different directions in statistics usage. Extensive experiments on different fields (vision and language), tasks (classification and segmentation), settings (supervised and semi-supervised), and distribution shift types (synthetic and natural) show the effectiveness. Code is available at https://github.com/amazon-research/crossnorm-selfnorm

Zhiqiang Tang, Yunhe Gao, Leonid Karlinsky et al.

Data augmentation is one of the most important tools in training modern deep neural networks. Recently, great advances have been made in searching for optimal augmentation policies in the image classification domain. However, two key points related to data augmentation remain uncovered by the current methods. First is that most if not all modern augmentation search methods are offline and learning policies are isolated from their usage. The learned policies are mostly constant throughout the training process and are not adapted to the current training model state. Second, the policies rely on class-preserving image processing functions. Hence applying current offline methods to new tasks may require domain knowledge to specify such kind of operations. In this work, we offer an orthogonal online data augmentation scheme together with three new augmentation networks, co-trained with the target learning task. It is both more efficient, in the sense that it does not require expensive offline training when entering a new domain, and more adaptive as it adapts to the learner state. Our augmentation networks require less domain knowledge and are easily applicable to new tasks. Extensive experiments demonstrate that the proposed scheme alone performs on par with the state-of-the-art offline data augmentation methods, as well as improving upon the state-of-the-art in combination with those methods. Code is available at https://github.com/zhiqiangdon/online-augment .

Zhiqiang Tang, Xi Peng, Shijie Geng et al.

In this paper, we propose quantized densely connected U-Nets for efficient visual landmark localization. The idea is that features of the same semantic meanings are globally reused across the stacked U-Nets. This dense connectivity largely improves the information flow, yielding improved localization accuracy. However, a vanilla dense design would suffer from critical efficiency issue in both training and testing. To solve this problem, we first propose order-K dense connectivity to trim off long-distance shortcuts; then, we use a memory-efficient implementation to significantly boost the training efficiency and investigate an iterative refinement that may slice the model size in half. Finally, to reduce the memory consumption and high precision operations both in training and testing, we further quantize weights, inputs, and gradients of our localization network to low bit-width numbers. We validate our approach in two tasks: human pose estimation and face alignment. The results show that our approach achieves state-of-the-art localization accuracy, but using ~70% fewer parameters, ~98% less model size and saving ~75% training memory compared with other benchmark localizers. The code is available at https://github.com/zhiqiangdon/CU-Net.

Zihan Zhong, Zhiqiang Tang, Tong He et al.

The Segment Anything Model (SAM) stands as a foundational framework for image segmentation. While it exhibits remarkable zero-shot generalization in typical scenarios, its advantage diminishes when applied to specialized domains like medical imagery and remote sensing. To address this limitation, this paper introduces Conv-LoRA, a simple yet effective parameter-efficient fine-tuning approach. By integrating ultra-lightweight convolutional parameters into Low-Rank Adaptation (LoRA), Conv-LoRA can inject image-related inductive biases into the plain ViT encoder, further reinforcing SAM's local prior assumption. Notably, Conv-LoRA not only preserves SAM's extensive segmentation knowledge but also revives its capacity of learning high-level image semantics, which is constrained by SAM's foreground-background segmentation pretraining. Comprehensive experimentation across diverse benchmarks spanning multiple domains underscores Conv-LoRA's superiority in adapting SAM to real-world semantic segmentation tasks.

Jun Xue, Yi Chai, Yanzhen Ren et al.

Speech editing achieves semantic inversion by performing fine-grained segment-level manipulation on original utterances, while preserving global perceptual naturalness. Existing detection studies mainly focus on manually edited speech with explicit splicing artifacts, and therefore struggle to cope with emerging end-to-end neural speech editing techniques that generate seamless acoustic transitions. To address this challenge, we first construct a large-scale bilingual dataset, AiEdit, which leverages large language models to drive precise semantic tampering logic and employs multiple advanced neural speech editing methods for data synthesis, thereby filling the gap of high-quality speech editing datasets. Building upon this foundation, we propose PELM (Prior-Enhanced Audio Large Language Model), the first large-model framework that unifies speech editing detection and content localization by formulating them as an audio question answering task. To mitigate the inherent forgery bias and semantic-priority bias observed in existing audio large models, PELM incorporates word-level probability priors to provide explicit acoustic cues, and further designs a centroid-aggregation-based acoustic consistency perception loss to explicitly enforce the modeling of subtle local distribution anomalies. Extensive experimental results demonstrate that PELM significantly outperforms state-of-the-art methods on both the HumanEdit and AiEdit datasets, achieving equal error rates (EER) of 0.57\% and 9.28\% (localization), respectively.

Rajalaxmi Rajagopalan, Ritwik Giri, Zhiqiang Tang et al.

Supervised speech enhancement methods have been very successful. However, in practical scenarios, there is a lack of clean speech, and self-supervised learning-based (SSL) speech enhancement methods that offer comparable enhancement performance and can be applied to other speech-related downstream applications are desired. In this work, we develop a masked autoencoder based universal speech enhancer that is agnostic to the type of distortion affecting speech, can handle multiple distortions simultaneously, and is trained in a self-supervised manner. An augmentation stack adds further distortions to the noisy input data. The masked autoencoder model learns to remove the added distortions along with reconstructing the masked regions of the spectrogram during pre-training. The pre-trained embeddings are then used by fine-tuning models trained on a small amount of paired data for specific downstream tasks. We evaluate the pre-trained features for denoising and dereverberation downstream tasks. We explore different augmentations (like single or multi-speaker) in the pre-training augmentation stack and the effect of different noisy input feature representations (like $log1p$ compression) on pre-trained embeddings and downstream fine-tuning enhancement performance. We show that the proposed method not only outperforms the baseline but also achieves state-of-the-art performance for both in-domain and out-of-domain evaluation datasets.

Zhiqiang Tang, Zihan Zhong, Tong He et al.

This paper studies the best practices for automatic machine learning (AutoML). While previous AutoML efforts have predominantly focused on unimodal data, the multimodal aspect remains under-explored. Our study delves into classification and regression problems involving flexible combinations of image, text, and tabular data. We curate a benchmark comprising 22 multimodal datasets from diverse real-world applications, encompassing all 4 combinations of the 3 modalities. Across this benchmark, we scrutinize design choices related to multimodal fusion strategies, multimodal data augmentation, converting tabular data into text, cross-modal alignment, and handling missing modalities. Through extensive experimentation and analysis, we distill a collection of effective strategies and consolidate them into a unified pipeline, achieving robust performance on diverse datasets.

Rami Aly, Zhiqiang Tang, Samson Tan et al.

Large Language Models (LLMs) frequently hallucinate, impeding their reliability in mission-critical situations. One approach to address this issue is to provide citations to relevant sources alongside generated content, enhancing the verifiability of generations. However, citing passages accurately in answers remains a substantial challenge. This paper proposes a weakly-supervised fine-tuning method leveraging factual consistency models (FCMs). Our approach alternates between generating texts with citations and supervised fine-tuning with FCM-filtered citation data. Focused learning is integrated into the objective, directing the fine-tuning process to emphasise the factual unit tokens, as measured by an FCM. Results on the ALCE few-shot citation benchmark with various instruction-tuned LLMs demonstrate superior performance compared to in-context learning, vanilla supervised fine-tuning, and state-of-the-art methods, with an average improvement of $34.1$, $15.5$, and $10.5$ citation F$_1$ points, respectively. Moreover, in a domain transfer setting we show that the obtained citation generation ability robustly transfers to unseen datasets. Notably, our citation improvements contribute to the lowest factual error rate across baselines.

Yunhe Gao, Zhiqiang Tang, Mu Zhou et al.

Data augmentation has proved extremely useful by increasing training data variance to alleviate overfitting and improve deep neural networks' generalization performance. In medical image analysis, a well-designed augmentation policy usually requires much expert knowledge and is difficult to generalize to multiple tasks due to the vast discrepancies among pixel intensities, image appearances, and object shapes in different medical tasks. To automate medical data augmentation, we propose a regularized adversarial training framework via two min-max objectives and three differentiable augmentation models covering affine transformation, deformation, and appearance changes. Our method is more automatic and efficient than previous automatic augmentation methods, which still rely on pre-defined operations with human-specified ranges and costly bi-level optimization. Extensive experiments demonstrated that our approach, with less training overhead, achieves superior performance over state-of-the-art auto-augmentation methods on both tasks of 2D skin cancer classification and 3D organs-at-risk segmentation.

Yizhe Zhu, Jianwen Xie, Zhiqiang Tang et al.

Zero-shot learning extends the conventional object classification to the unseen class recognition by introducing semantic representations of classes. Existing approaches predominantly focus on learning the proper mapping function for visual-semantic embedding, while neglecting the effect of learning discriminative visual features. In this paper, we study the significance of the discriminative region localization. We propose a semantic-guided multi-attention localization model, which automatically discovers the most discriminative parts of objects for zero-shot learning without any human annotations. Our model jointly learns cooperative global and local features from the whole object as well as the detected parts to categorize objects based on semantic descriptions. Moreover, with the joint supervision of embedding softmax loss and class-center triplet loss, the model is encouraged to learn features with high inter-class dispersion and intra-class compactness. Through comprehensive experiments on three widely used zero-shot learning benchmarks, we show the efficacy of the multi-attention localization and our proposed approach improves the state-of-the-art results by a considerable margin.

Zhiqiang Tang, Xi Peng, Shijie Geng et al.

We design a new connectivity pattern for the U-Net architecture. Given several stacked U-Nets, we couple each U-Net pair through the connections of their semantic blocks, resulting in the coupled U-Nets (CU-Net). The coupling connections could make the information flow more efficiently across U-Nets. The feature reuse across U-Nets makes each U-Net very parameter efficient. We evaluate the coupled U-Nets on two benchmark datasets of human pose estimation. Both the accuracy and model parameter number are compared. The CU-Net obtains comparable accuracy as state-of-the-art methods. However, it only has at least 60% fewer parameters than other approaches.

Xi Peng, Zhiqiang Tang, Fei Yang et al.

Random data augmentation is a critical technique to avoid overfitting in training deep neural network models. However, data augmentation and network training are usually treated as two isolated processes, limiting the effectiveness of network training. Why not jointly optimize the two? We propose adversarial data augmentation to address this limitation. The main idea is to design an augmentation network (generator) that competes against a target network (discriminator) by generating `hard' augmentation operations online. The augmentation network explores the weaknesses of the target network, while the latter learns from `hard' augmentations to achieve better performance. We also design a reward/penalty strategy for effective joint training. We demonstrate our approach on the problem of human pose estimation and carry out a comprehensive experimental analysis, showing that our method can significantly improve state-of-the-art models without additional data efforts.

Rahil Mehrizi, Xi Peng, Zhiqiang Tang et al.

Lifting is a common manual material handling task performed in the workplaces. It is considered as one of the main risk factors for Work-related Musculoskeletal Disorders. To improve work place safety, it is necessary to assess musculoskeletal and biomechanical risk exposures associated with these tasks, which requires very accurate 3D pose. Existing approaches mainly utilize marker-based sensors to collect 3D information. However, these methods are usually expensive to setup, time-consuming in process, and sensitive to the surrounding environment. In this study, we propose a multi-view based deep perceptron approach to address aforementioned limitations. Our approach consists of two modules: a "view-specific perceptron" network extracts rich information independently from the image of view, which includes both 2D shape and hierarchical texture information; while a "multi-view integration" network synthesizes information from all available views to predict accurate 3D pose. To fully evaluate our approach, we carried out comprehensive experiments to compare different variants of our design. The results prove that our approach achieves comparable performance with former marker-based methods, i.e. an average error of $14.72 \pm 2.96$ mm on the lifting dataset. The results are also compared with state-of-the-art methods on HumanEva-I dataset, which demonstrates the superior performance of our approach.

Cheng Xuan, Zhiqiang Tang, Jinxin Xu

One of the most efficient ways for a learning-based robotic arm to learn to process complex tasks as human, is to directly learn from observing how human complete those tasks, and then imitate. Our idea is based on success of Deep Q-Learning (DQN) algorithm according to reinforcement learning, and then extend to Deep Deterministic Policy Gradient (DDPG) algorithm. We developed a learning-based method, combining modified DDPG and visual imitation network. Our approach acquires frames only from a monocular camera, and no need to either construct a 3D environment or generate actual points. The result we expected during training, was that robot would be able to move as almost the same as how human hands did.